Re: [Veritas-bu] Veritas NBU 6.0 MP3 on HP-UX 11.23 v2 IA backups don'tstart either manual or from schedule without an error
When the services are up and you start a job, what is the output of bpps command? There must be an entry for the job. If there is one, the wait. Wait a lot. Do you have any media servers configured? From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Eisenhardt Sent: Wednesday, October 25, 2006 5:53 AM To: Veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Veritas NBU 6.0 MP3 on HP-UX 11.23 v2 IA backups don'tstart either manual or from schedule without an error I don't know whay is causing this, but I've performed the same install and at the first site everything works fine. The second site I can not get any backups to start. Ive unistalled NBU with the following: bp.kill_all vxlogcfg -r -p 51216 create_nbdb -drop only (This returns can not ping server, server unavailable) then says NBDB successfully removed Remove everything under /usr/openv Perform the reinstall install all licenses install options software install MP 3 packs configure the library create the storage volumes with bringing the tape into the library create a backup policy for the master server select manual backup, (and nothing happens... no error nothing shows up in the activity monitor) Any Ideas ?? Thanks, -- Mark Eisenhardt cell 407-590-4451 ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Migrate media server platform
Ian If I was you, I would install new media server and then - use bpmedia -movedb -m media_id -newserver hostname [-oldserver hostname] [-v] on media associated to old media server to reflect new media server - use bpimage -newserver name [-oldserver name] [-id id] on media associated with old media server , this then changes all images on selected media to reflect new media server alleviating the need for FORCE_RESTORE_MEDIA_SERVER = $media_server Regards Dave -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ian Sent: 24 October 2006 18:08 To: veritas-mail-list Subject: [Veritas-bu] Migrate media server platform Hi All, More advice sought. Our environment... Win2K3 Netbackup Enterprise Master 6.0MP3 2 x Solaris 8 Media Servers 6.0MP3 8 x SDLT drives with SSO. I want to swap out one of the Solaris media servers for a Linux (SLES9) media server. This is so I can utilise an HP disk array as DSU on Linux. The array does not support Solaris. My question is which would be the best approach? Any gotchas? I am thinking of shutting down the Solaris media server, installing the Linux Media server with the same hostname, then recover the catalog to the new media server. Perhaps I can just tar up the appropriate media catalog directories on the old box and restore them on the new. Does the NB install process of a media server mess with the master db? I suspect it would to add itself. I'd prefer to keep the old media server hostname if possible. Or should I just install a new media server with a new name, and redirect any restores of data from the old media server to the new one? Thanks in advance, Ian ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu Notice to recipient: The information in this internet e-mail and any attachments is confidential and may be privileged. It is intended solely for the addressee. If you are not the intended addressee please notify the sender immediately by telephone. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to external clients any opinions or advice contained in this internet e-mail are subject to the terms and conditions expressed in any applicable governing terms of business or client engagement letter issued by the pertinent Bank of America group entity. If this email originates from the U.K. please note that Bank of America, N.A., London Branch and Banc of America Securities Limited are authorised and regulated by the Financial Services Authority. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] User ID for Netware
Hi, Does anyone know if I canuse an ID (with limited rights) to run Netware backups? If so, what rights do I need? Currently I am using the ADMIN ID. -- DLew97 ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Tape not mounting
Netbackup 4.5mp6 on Soalris 8. I have 2 LTO drives in my system but a backup just fails to mount a tape in the first drive and just downs it. I have no idea why and cant see in the logs. I have log level set to 4 and have been looking in the bptm log but dont see anything obvious. There is nothing in the drive also like a stuck tape. Where do i look to find if the drive is at fault or not? Some info below taken while the backup had started. The Drive was Up originally. tpconfig -d Index DriveName DrivePathTypeShared Status * * ** ** ** 0 HPUltrium1-SCSI0 /dev/rmt/0cbnhcartNo DOWN TLD(0) Definition DRIVE=1 1 SEAGATEULTRIUM06242-XX /dev/rmt/1cbnhcartNo UP TLD(0) Definition DRIVE=2 Currently defined robotics are: TLD(0) robotic path = /dev/sg/c3t0l0, volume database host = iraya vmoprcmd PENDING REQUESTS NONE DRIVE STATUS Drv Type Control User Label RecMID ExtMID Ready Wr.Enbl. ReqId 0 hcart DOWN-TLD - No -- 1 hcartTLDroot Yes 0172L1 0172L1 Yes Yes0 ADDITIONAL DRIVE STATUS Drv DriveNameSharedAssignedComment 0 HPUltrium1-SCSI0 No - 1 SEAGATEULTRIUM06242- No iraya sgscan tape /dev/sg/c3t1l0: (/dev/rmt/0): HP Ultrium 1-SCSI /dev/sg/c3t2l0: (/dev/rmt/1): SEAGATE ULTRIUM06242-XXX ls -l /dev/rmt0 lrwxrwxrwx 1 root other 43 Sep 8 17:35 /dev/rmt/0 - ../../devices/[EMAIL PROTECTED],70/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0: ls -l /dev/sg/c3t1l0 lrwxrwxrwx 1 root other 46 Apr 12 2006 /dev/sg/c3t1l0 - ../../devices/[EMAIL PROTECTED],70/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0:raw echo s d | tldtest -r /dev/sg/c3t0l0 Opening /dev/sg/c3t0l0 Enter tld commands (? returns help information) drive 1 (addr 128) access = 1 Contains Cartridge = no SCSI ID from drive 1 is 1 drive 2 (addr 129) access = 1 Contains Cartridge = yes Source address = 193 (slot 2) Barcode = 000172L1 SCSI ID from drive 2 is 2 READ_ELEMENT_STATUS complete ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Pre-requisites for SQL backups Windows 2000/2003
Dear All, Does any one have a checklist or doc on the pre-requisites required on a. Windows, ex: users, privleges e.t.c b. SQL 2000/2005 user and privleges, Info : Netbackup server on Solaris 5.1 MP4 Currently we face a uphill task almost everyday resolving SQL and Nt related errors. Sometime solved by adding MP4, or starting the services with a privleged user, using the sa on the API e.t.c. The problems are more complex when we deal with windows 2003. Regards, BIJU ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] RES: Tape not mounting
Do a test with robtest, try to load and unload the tape, some times is a error with the drivepath. T+ Carlos Alberto Lima dos Santos Eng. Computação Jundiaí SP-BR * [EMAIL PROTECTED] H https://www.linkedin.com/in/carlostoca skype carlostoca msn only [EMAIL PROTECTED] -Mensagem original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Em nome de Dave Markham Enviada em: quarta-feira, 25 de outubro de 2006 09:14 Para: veritas-bu@mailman.eng.auburn.edu Assunto: [Veritas-bu] Tape not mounting Netbackup 4.5mp6 on Soalris 8. I have 2 LTO drives in my system but a backup just fails to mount a tape in the first drive and just downs it. I have no idea why and cant see in the logs. I have log level set to 4 and have been looking in the bptm log but dont see anything obvious. There is nothing in the drive also like a stuck tape. Where do i look to find if the drive is at fault or not? Some info below taken while the backup had started. The Drive was Up originally. tpconfig -d Index DriveName DrivePathType Shared Status * * ** ** ** 0 HPUltrium1-SCSI0 /dev/rmt/0cbnhcart No DOWN TLD(0) Definition DRIVE=1 1 SEAGATEULTRIUM06242-XX /dev/rmt/1cbnhcart No UP TLD(0) Definition DRIVE=2 Currently defined robotics are: TLD(0) robotic path = /dev/sg/c3t0l0, volume database host = iraya vmoprcmd PENDING REQUESTS NONE DRIVE STATUS Drv Type Control User Label RecMID ExtMID Ready Wr.Enbl. ReqId 0 hcart DOWN-TLD - No -- 1 hcartTLDroot Yes 0172L1 0172L1 Yes Yes0 ADDITIONAL DRIVE STATUS Drv DriveNameSharedAssignedComment 0 HPUltrium1-SCSI0 No - 1 SEAGATEULTRIUM06242- No iraya sgscan tape /dev/sg/c3t1l0: (/dev/rmt/0): HP Ultrium 1-SCSI /dev/sg/c3t2l0: (/dev/rmt/1): SEAGATE ULTRIUM06242-XXX ls -l /dev/rmt0 lrwxrwxrwx 1 root other 43 Sep 8 17:35 /dev/rmt/0 - ../../devices/[EMAIL PROTECTED],70/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0: ls -l /dev/sg/c3t1l0 lrwxrwxrwx 1 root other 46 Apr 12 2006 /dev/sg/c3t1l0 - ../../devices/[EMAIL PROTECTED],70/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0:raw echo s d | tldtest -r /dev/sg/c3t0l0 Opening /dev/sg/c3t0l0 Enter tld commands (? returns help information) drive 1 (addr 128) access = 1 Contains Cartridge = no SCSI ID from drive 1 is 1 drive 2 (addr 129) access = 1 Contains Cartridge = yes Source address = 193 (slot 2) Barcode = 000172L1 SCSI ID from drive 2 is 2 READ_ELEMENT_STATUS complete ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Yahoo! Acesso Grátis - Internet rápida e grátis. Instale o discador agora! http://br.acesso.yahoo.com ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Tape not mounting
Hello Dave, Is the drive SCSI connected correctly? Also terminated at the end of the chain. Funny, just sorted out an identical problem - start a job runs, attempts to load in drive 1, downs the drive, mounts in drive 2. My problem was the SCSI Cable BETWEEN the drives. Absolutely nothing wrong with it from a visual perspective, but after changing the drive, it worked fine. Also, has this problem been constant, or has it just recently started to occur? Have you attempted to try ROBTEST by chance? Does your robotic library give an indication of a drive problem? Rebooting of the Robot perhaps? Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Dave Markham [mailto:[EMAIL PROTECTED] Sent: 25 October 2006 12:14 To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Tape not mounting Netbackup 4.5mp6 on Soalris 8. I have 2 LTO drives in my system but a backup just fails to mount a tape in the first drive and just downs it. I have no idea why and cant see in the logs. I have log level set to 4 and have been looking in the bptm log but dont see anything obvious. There is nothing in the drive also like a stuck tape. Where do i look to find if the drive is at fault or not? Some info below taken while the backup had started. The Drive was Up originally. tpconfig -d Index DriveName DrivePathTypeShared Status * * ** ** ** 0 HPUltrium1-SCSI0 /dev/rmt/0cbnhcartNo DOWN TLD(0) Definition DRIVE=1 1 SEAGATEULTRIUM06242-XX /dev/rmt/1cbnhcartNo UP TLD(0) Definition DRIVE=2 Currently defined robotics are: TLD(0) robotic path = /dev/sg/c3t0l0, volume database host = iraya vmoprcmd PENDING REQUESTS NONE DRIVE STATUS Drv Type Control User Label RecMID ExtMID Ready Wr.Enbl. ReqId 0 hcart DOWN-TLD - No -- 1 hcartTLDroot Yes 0172L1 0172L1 Yes Yes0 ADDITIONAL DRIVE STATUS Drv DriveNameSharedAssignedComment 0 HPUltrium1-SCSI0 No - 1 SEAGATEULTRIUM06242- No iraya sgscan tape /dev/sg/c3t1l0: (/dev/rmt/0): HP Ultrium 1-SCSI /dev/sg/c3t2l0: (/dev/rmt/1): SEAGATE ULTRIUM06242-XXX ls -l /dev/rmt0 lrwxrwxrwx 1 root other 43 Sep 8 17:35 /dev/rmt/0 - ../../devices/[EMAIL PROTECTED],70/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0: ls -l /dev/sg/c3t1l0 lrwxrwxrwx 1 root other 46 Apr 12 2006 /dev/sg/c3t1l0 - ../../devices/[EMAIL PROTECTED],70/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0:raw echo s d | tldtest -r /dev/sg/c3t0l0 Opening /dev/sg/c3t0l0 Enter tld commands (? returns help information) drive 1 (addr 128) access = 1 Contains Cartridge = no SCSI ID from drive 1 is 1 drive 2 (addr 129) access = 1 Contains Cartridge = yes Source address = 193 (slot 2) Barcode = 000172L1 SCSI ID from drive 2 is 2 READ_ELEMENT_STATUS complete ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. - Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Tape not mounting
Using the device control panel can you mount a tape? (aka, can we prove the hardware works?) If so, how about trying to move tapes with robtest? I've had similar issues with our older libraries and I can't think of a single instance where it wasn't related to hardware failure. -Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Markham Sent: Wednesday, October 25, 2006 7:14 AM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Tape not mounting Netbackup 4.5mp6 on Soalris 8. I have 2 LTO drives in my system but a backup just fails to mount a tape in the first drive and just downs it. I have no idea why and cant see in the logs. I have log level set to 4 and have been looking in the bptm log but dont see anything obvious. There is nothing in the drive also like a stuck tape. Where do i look to find if the drive is at fault or not? Some info below taken while the backup had started. The Drive was Up originally. tpconfig -d Index DriveName DrivePathTypeShared Status * * ** ** ** 0 HPUltrium1-SCSI0 /dev/rmt/0cbnhcartNo DOWN TLD(0) Definition DRIVE=1 1 SEAGATEULTRIUM06242-XX /dev/rmt/1cbnhcartNo UP TLD(0) Definition DRIVE=2 Currently defined robotics are: TLD(0) robotic path = /dev/sg/c3t0l0, volume database host = iraya vmoprcmd PENDING REQUESTS NONE DRIVE STATUS Drv Type Control User Label RecMID ExtMID Ready Wr.Enbl. ReqId 0 hcart DOWN-TLD - No - - 1 hcartTLDroot Yes 0172L1 0172L1 Yes Yes 0 ADDITIONAL DRIVE STATUS Drv DriveNameSharedAssignedComment 0 HPUltrium1-SCSI0 No - 1 SEAGATEULTRIUM06242- No iraya sgscan tape /dev/sg/c3t1l0: (/dev/rmt/0): HP Ultrium 1-SCSI /dev/sg/c3t2l0: (/dev/rmt/1): SEAGATE ULTRIUM06242-XXX ls -l /dev/rmt0 lrwxrwxrwx 1 root other 43 Sep 8 17:35 /dev/rmt/0 - ../../devices/[EMAIL PROTECTED],70/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0: ls -l /dev/sg/c3t1l0 lrwxrwxrwx 1 root other 46 Apr 12 2006 /dev/sg/c3t1l0 - ../../devices/[EMAIL PROTECTED],70/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0:raw echo s d | tldtest -r /dev/sg/c3t0l0 Opening /dev/sg/c3t0l0 Enter tld commands (? returns help information) drive 1 (addr 128) access = 1 Contains Cartridge = no SCSI ID from drive 1 is 1 drive 2 (addr 129) access = 1 Contains Cartridge = yes Source address = 193 (slot 2) Barcode = 000172L1 SCSI ID from drive 2 is 2 READ_ELEMENT_STATUS complete ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] exclude list question
If I make an exclude list entry like this: C:\Documents and Settings\*\Local Settings\Temp\* Will that exclude \Local Settings\Temp\* from every folder in C:\Documents and Settings\ ? If not, what would be the best way to do that? Jared M. Seaton == CONFIDENTIALITY NOTICE: This e-mail message and all attachments transmitted with it may contain legally privileged, proprietary and/or confidential information intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution, duplication or other use of this message and/or its attachments is strictly prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message and its attachments. Thank you. == ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] RES: Pre-requisites for SQL backups Windows 2000/2003
You can download the NBU for SQL user's guide form support.veritas com, there you have this informations. To do the scripts using the NBU GUII usea database admin, now to do a backup I start the NBU client services using a user that is a SQL backup administrator. T+ Carlos Alberto Lima dos Santos Eng. Computação Jundiaí SP-BR * [EMAIL PROTECTED] H https://www.linkedin.com/in/carlostoca icq 123987362 - skype carlostoca msn only [EMAIL PROTECTED] De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Em nome de Veritas NetbackupEnviada em: quarta-feira, 25 de outubro de 2006 10:01Para: NB List MailAssunto: [Veritas-bu] Pre-requisites for SQL backups Windows 2000/2003 Dear All,Does any one have a checklist or doc on the pre-requisites required ona. Windows, ex: users, privleges e.t.cb. SQL 2000/2005 user and privleges,Info : Netbackup server on Solaris 5.1 MP4Currently we face a uphill task almost everyday resolving SQL and Nt related errors. Sometime solved by adding MP4, or starting the services with a privleged user, using the sa on the API e.t.c.The problems are more complex when we deal with windows 2003.Regards,BIJU ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Linux Media Server, Adic Library, and Drivers
We're testinga Linux media server now to try and resolve some NDMP issues. I have the Media server set up, talking to my Master, fiber connectivity to a tape drive (properly zoned), but I can't find drivers. I've contacted ADIC support, but they've been no help. I've found IBM drivers (library contains IBM LTO3s), but they don't work for fibre attached, just SCSI. The fibre attached drivers link to Emulex, but we have QLogic cards. Now, I'm about at the end of my rope. Any suggestions? Contact Veritas support? My last hope is to wait on my ADIC Sales Rep's Engineer. Thanks, Jason___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Pre-requisites for SQL backups Windows 2000/20 03
Title: Message Hi Biju My own advice would be to check the manuals for the pre-requirements. not too sure why you are getting problems on windows 2003 though. You should also be able to download the PDF manuals on the Symantec Web Site. Regards Simon Weaver3rd Line Technical SupportWindows Domain Administrator EADS Astrium Limited, B23AA IM (DCS)Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message-From: Veritas Netbackup [mailto:[EMAIL PROTECTED] Sent: 25 October 2006 13:01To: NB List MailSubject: [Veritas-bu] Pre-requisites for SQL backups Windows 2000/2003Dear All,Does any one have a checklist or doc on the pre-requisites required ona. Windows, ex: users, privleges e.t.cb. SQL 2000/2005 user and privleges,Info : Netbackup server on Solaris 5.1 MP4Currently we face a uphill task almost everyday resolving SQL and Nt related errors. Sometime solved by adding MP4, or starting the services with a privleged user, using the sa on the API e.t.c.The problems are more complex when we deal with windows 2003.Regards,BIJU This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. - Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Linux Media Server, Adic Library, and Drivers
Jason, We have downloaded ibm tape drivers for hp/ux from the url: http://www-1.ibm.com/support/dlsearch.wss?rs=546tc=STCVQ6Zdc=D430 For solaris 9 we are using the sun drivers for ibm LTO3 tape drives with qlogic cards. len From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brooks, JasonSent: Wednesday, October 25, 2006 11:28 AMTo: veritas-bu@mailman.eng.auburn.eduSubject: [Veritas-bu] Linux Media Server, Adic Library, and Drivers We're testinga Linux media server now to try and resolve some NDMP issues. I have the Media server set up, talking to my Master, fiber connectivity to a tape drive (properly zoned), but I can't find drivers. I've contacted ADIC support, but they've been no help. I've found IBM drivers (library contains IBM LTO3s), but they don't work for fibre attached, just SCSI. The fibre attached drivers link to Emulex, but we have QLogic cards. Now, I'm about at the end of my rope. Any suggestions? Contact Veritas support? My last hope is to wait on my ADIC Sales Rep's Engineer. Thanks, Jason ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] LTO3 Drivers - HP ESL
Title: Message Hi Guys Wonder if I could get some assistance? Have a HP ESL-322e Robotic Library using Ultrium 960 Drives I have a driver on them, but they are dated 2004 !! I cannot for the life of me find any NEW drivers for LTO3 Drives! Would anyone happen to have a link or possibly provide some help - I am still working on some odd issues within NBU, and drivers are the last resort. Thanks Regards Simon Weaver3rd Line Technical SupportWindows Domain Administrator EADS Astrium Limited, B23AA IM (DCS)Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. - Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Linux Media Server, Adic Library, and Drivers
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 what do you see when you... cat /proc/scsi/scsi If it isn't there, then your O/S isn't seeing the drives, check your zones again. Also, are you using the included qlogic driver to the kernel (which distro and kernel are you using?) or have you installed the qlogic Linux drivers? There shouldn't be a driver for the LTO3 drives, it should be seen as a SCSI st device and the NBU install should set up the SG driver correctly. There are also great docs included with NBU for this. I would also help when asking questions to supply all the data needed: - -O/S version and architecture? - -NBU version and MP level? - -which qlogic cards? Thanks Peter Peter DrakeUnderkoffler Xinupro, LLC 617-834-2352 Brooks, Jason wrote: We're testing a Linux media server now to try and resolve some NDMP issues. I have the Media server set up, talking to my Master, fiber connectivity to a tape drive (properly zoned), but I can't find drivers. I've contacted ADIC support, but they've been no help. I've found IBM drivers (library contains IBM LTO3s), but they don't work for fibre attached, just SCSI. The fibre attached drivers link to Emulex, but we have QLogic cards. Now, I'm about at the end of my rope. Any suggestions? Contact Veritas support? My last hope is to wait on my ADIC Sales Rep's Engineer. Thanks, Jason ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (FreeBSD) iD8DBQFFP5M1l+lekZRM55oRAgnWAJ427l9vIRPhqHCtWVJaVUfgwY7gNACeOmhd 2LeaZXnqQeRnzo7Q8UO+uvo= =onCD -END PGP SIGNATURE- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Linux Media Server, Adic Library, and Drivers
We have to Linux media servers talking to a linux master. While they're using an ADIC Pathlight VTL (FC connected with QLogic 23xx cards), to the linux box it still tastes just like a scsi tape drive. I want to think we used either the IBM tape drivers (an RPM was available for SUSE on IBM's site), or left it to the standard linux kernel with /dev/sgx and /dev/stx for the devices. does a rpm -qa and some grepping No drivers, just standard linux kernel. Something I did have to do with SLES9 is to make sure the QLogic and Adaptec cards were loaded in the initrd, so the device ordering would be consistent when the box needed to get rebooted. We had a condition where the device addresses (/dev/st#) would move to different numbers on a system restart. Putting the drivers in the initrd fixed that and they load in the correct order every time. And, fwiw, we are (soon) getting ready to replace our scsi attached Scalar 100 with a fiber attached Scalar i500. So I might be able to shuffle some things to test out the FC vs SCSI attached drives if there's a difference. But, I thought the Linux kernel treats FC and SCSI the same way as far as system-to-device interaction goes. hth, ~ Robin On Wed, 2006-10-25 at 16:20 +, Len Boyle wrote: Jason, We have downloaded ibm tape drivers for hp/ux from the url: http://www-1.ibm.com/support/dlsearch.wss?rs=546tc=STCVQ6Zdc=D430 For solaris 9 we are using the sun drivers for ibm LTO3 tape drives with qlogic cards. len We're testing a Linux media server now to try and resolve some NDMP issues. I have the Media server set up, talking to my Master, fiber connectivity to a tape drive (properly zoned), but I can't find drivers. I've contacted ADIC support, but they've been no help. I've found IBM drivers (library contains IBM LTO3s), but they don't work for fibre attached, just SCSI. The fibre attached drivers link to Emulex, but we have QLogic cards. Now, I'm about at the end of my rope. Any suggestions? Contact Veritas support? My last hope is to wait on my ADIC Sales Rep's Engineer. Thanks, Jason ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] 6.0 advantages?
Title: 6.0 advantages? What advantages do you see in 6.x over 5.x? What things are better and easier etc. I need to get some points to be used for planning a 6.0 upgrade. Greg This e-mail and any attachments are confidential, may contain legal, professional or other privileged information, and are intended solely for the addressee. If you are not the intended recipient, do not use the information in this e-mail in any way, delete this e-mail and notify the sender. CEG-IP1 ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] LTO3 Drivers - HP ESL
Title: Message Are the VERITAS drivers not working for you? I use 960's, and the 5.1 VERITAS driver is working just fine for me. Should be on any NBU 5.x install CD under "Additional Products" or somesuch. Let me know if you needs exacts... Cheers, Jon From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WEAVER, SimonSent: Wednesday, October 25, 2006 12:25 PMTo: 'veritas-bu@mailman.eng.auburn.edu'Subject: [Veritas-bu] LTO3 Drivers - HP ESL Hi Guys Wonder if I could get some assistance? Have a HP ESL-322e Robotic Library using Ultrium 960 Drives I have a driver on them, but they are dated 2004 !! I cannot for the life of me find any NEW drivers for LTO3 Drives! Would anyone happen to have a link or possibly provide some help - I am still working on some odd issues within NBU, and drivers are the last resort. Thanks Regards Simon Weaver3rd Line Technical SupportWindows Domain Administrator EADS Astrium Limited, B23AA IM (DCS)Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified.-Astrium Limited, Registered in England and Wales No. 2449259Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England This message may contain privileged and/or confidential information. If you have received this e-mail in error or are not the intended recipient, you may not use, copy, disseminate or distribute it; do not open any attachments, delete it immediately from your system and notify the sender promptly by e-mail that you have done so. Thank you. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Linux Media Server, Adic Library, and Drivers
/proc/scsi/scsi only sees the local SCSI bus. We're running RHEL3, kernel 2.4.21-40.EL with Qlogic 2300 driver installed. Zones look right, but not sure why drive isn't seen. The tape drive is a straight FC connect - no backplane in the ADIC (Scalar i2K). The server is a Dell with a Xeon, NBU 6.0 MP3, Qlogic 23xx. Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter DrakeUnderkoffler Sent: Wednesday, October 25, 2006 12:39 PM To: Brooks, Jason Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Linux Media Server, Adic Library, and Drivers -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 what do you see when you... cat /proc/scsi/scsi If it isn't there, then your O/S isn't seeing the drives, check your zones again. Also, are you using the included qlogic driver to the kernel (which distro and kernel are you using?) or have you installed the qlogic Linux drivers? There shouldn't be a driver for the LTO3 drives, it should be seen as a SCSI st device and the NBU install should set up the SG driver correctly. There are also great docs included with NBU for this. I would also help when asking questions to supply all the data needed: - -O/S version and architecture? - -NBU version and MP level? - -which qlogic cards? Thanks Peter Peter DrakeUnderkoffler Xinupro, LLC 617-834-2352 Brooks, Jason wrote: We're testing a Linux media server now to try and resolve some NDMP issues. I have the Media server set up, talking to my Master, fiber connectivity to a tape drive (properly zoned), but I can't find drivers. I've contacted ADIC support, but they've been no help. I've found IBM drivers (library contains IBM LTO3s), but they don't work for fibre attached, just SCSI. The fibre attached drivers link to Emulex, but we have QLogic cards. Now, I'm about at the end of my rope. Any suggestions? Contact Veritas support? My last hope is to wait on my ADIC Sales Rep's Engineer. Thanks, Jason -- -- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (FreeBSD) iD8DBQFFP5M1l+lekZRM55oRAgnWAJ427l9vIRPhqHCtWVJaVUfgwY7gNACeOmhd 2LeaZXnqQeRnzo7Q8UO+uvo= =onCD -END PGP SIGNATURE- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Linux Media Server, Adic Library, and Drivers
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Is the module for the qlogic hba loaded lsmod | grep ql If so, then cat /proc/scsi/qla2xxx/# where # is whatever controller number it was assigned. If there is no module loaded, then open up another window with a tail -f /var/log/messages and while watching that, perform a modprobe -v qla2300, lets see what comes out of it. If they are seen at this point, make sure you have the needed entry in /etc/modules.conf and them create a new boot image. Thanks Peter Peter DrakeUnderkoffler Xinupro, LLC 617-834-2352 Brooks, Jason wrote: /proc/scsi/scsi only sees the local SCSI bus. We're running RHEL3, kernel 2.4.21-40.EL with Qlogic 2300 driver installed. Zones look right, but not sure why drive isn't seen. The tape drive is a straight FC connect - no backplane in the ADIC (Scalar i2K). The server is a Dell with a Xeon, NBU 6.0 MP3, Qlogic 23xx. Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter DrakeUnderkoffler Sent: Wednesday, October 25, 2006 12:39 PM To: Brooks, Jason Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Linux Media Server, Adic Library, and Drivers what do you see when you... cat /proc/scsi/scsi If it isn't there, then your O/S isn't seeing the drives, check your zones again. Also, are you using the included qlogic driver to the kernel (which distro and kernel are you using?) or have you installed the qlogic Linux drivers? There shouldn't be a driver for the LTO3 drives, it should be seen as a SCSI st device and the NBU install should set up the SG driver correctly. There are also great docs included with NBU for this. I would also help when asking questions to supply all the data needed: -O/S version and architecture? -NBU version and MP level? -which qlogic cards? Thanks Peter Peter DrakeUnderkoffler Xinupro, LLC 617-834-2352 Brooks, Jason wrote: We're testing a Linux media server now to try and resolve some NDMP issues. I have the Media server set up, talking to my Master, fiber connectivity to a tape drive (properly zoned), but I can't find drivers. I've contacted ADIC support, but they've been no help. I've found IBM drivers (library contains IBM LTO3s), but they don't work for fibre attached, just SCSI. The fibre attached drivers link to Emulex, but we have QLogic cards. Now, I'm about at the end of my rope. Any suggestions? Contact Veritas support? My last hope is to wait on my ADIC Sales Rep's Engineer. Thanks, Jason -- -- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (FreeBSD) iD8DBQFFP6EPl+lekZRM55oRAgyqAJ9N0wOcbHNxEYCe6+1HyyTru9v8DgCdHfLq 9w5TMQJR0utw77UtOdTecpc= =qPDp -END PGP SIGNATURE- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Linux Media Server, Adic Library, and Drivers
It's amazing what a reboot will do! Using Peter's suggestions and piecing together some things, we realized a needed reboot wasn't preformed. Reboot and BAM, a tape device. Thanks all! Jason -Original Message- From: Peter DrakeUnderkoffler [mailto:[EMAIL PROTECTED] Sent: Wednesday, October 25, 2006 1:38 PM To: Brooks, Jason Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Linux Media Server, Adic Library, and Drivers -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Is the module for the qlogic hba loaded lsmod | grep ql If so, then cat /proc/scsi/qla2xxx/# where # is whatever controller number it was assigned. If there is no module loaded, then open up another window with a tail -f /var/log/messages and while watching that, perform a modprobe -v qla2300, lets see what comes out of it. If they are seen at this point, make sure you have the needed entry in /etc/modules.conf and them create a new boot image. Thanks Peter Peter DrakeUnderkoffler Xinupro, LLC 617-834-2352 Brooks, Jason wrote: /proc/scsi/scsi only sees the local SCSI bus. We're running RHEL3, kernel 2.4.21-40.EL with Qlogic 2300 driver installed. Zones look right, but not sure why drive isn't seen. The tape drive is a straight FC connect - no backplane in the ADIC (Scalar i2K). The server is a Dell with a Xeon, NBU 6.0 MP3, Qlogic 23xx. Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter DrakeUnderkoffler Sent: Wednesday, October 25, 2006 12:39 PM To: Brooks, Jason Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Linux Media Server, Adic Library, and Drivers what do you see when you... cat /proc/scsi/scsi If it isn't there, then your O/S isn't seeing the drives, check your zones again. Also, are you using the included qlogic driver to the kernel (which distro and kernel are you using?) or have you installed the qlogic Linux drivers? There shouldn't be a driver for the LTO3 drives, it should be seen as a SCSI st device and the NBU install should set up the SG driver correctly. There are also great docs included with NBU for this. I would also help when asking questions to supply all the data needed: -O/S version and architecture? -NBU version and MP level? -which qlogic cards? Thanks Peter Peter DrakeUnderkoffler Xinupro, LLC 617-834-2352 Brooks, Jason wrote: We're testing a Linux media server now to try and resolve some NDMP issues. I have the Media server set up, talking to my Master, fiber connectivity to a tape drive (properly zoned), but I can't find drivers. I've contacted ADIC support, but they've been no help. I've found IBM drivers (library contains IBM LTO3s), but they don't work for fibre attached, just SCSI. The fibre attached drivers link to Emulex, but we have QLogic cards. Now, I'm about at the end of my rope. Any suggestions? Contact Veritas support? My last hope is to wait on my ADIC Sales Rep's Engineer. Thanks, Jason -- -- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (FreeBSD) iD8DBQFFP6EPl+lekZRM55oRAgyqAJ9N0wOcbHNxEYCe6+1HyyTru9v8DgCdHfLq 9w5TMQJR0utw77UtOdTecpc= =qPDp -END PGP SIGNATURE- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] 6.0 advantages?
Title: 6.0 advantages? In an environment with multiple media servers you only have to recover the Master in a DR. This allows us to be up and recovering any server in the 2 hours it takes to recover the catalog. If a media server is needed for throughput you can do a basic install of Veritas on it and be up and running. With all the data on the Master the media servers do not need any data recovered to be functional. I like the way it auto restarts failed jobs, but it bit me last night when a job tried to run 5 times and now I have 23 failures on the report for 1 server. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Hindle, Greg Sent: Wednesday, October 25, 2006 9:49 AM To: NB List Mail Subject: [Veritas-bu] 6.0 advantages? What advantages do you see in 6.x over 5.x? What things are better and easier etc. I need to get some points to be used for planning a 6.0 upgrade. Greg This e-mail and any attachments are confidential, may contain legal, professional or other privileged information, and are intended solely for the addressee. If you are not the intended recipient, do not use the information in this e-mail in any way, delete this e-mail and notify the sender. CEG-IP1 CONFIDENTIALITY NOTICE: This email may contain confidential and privileged material for the sole use of the intended recipient(s). Any review, use, distribution or disclosure by others is strictly prohibited. If you have received this communication in error, please notify the sender immediately by email and delete the message and any file attachments from your computer. Thank you. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] NB 6.0 startup using ltid -v ; initbprd
Can NB 6.0 on Solaris be started like earlier versions of NB with # ltid -v #initbprd # ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] 6.0 scheduler issues
I should note that I added the pre-MP4 patches, and left checkpoints enabled. I only have three policies that use checkpoints, all of them being large windows storage server NAS systems. The rest of my data is oracle on solaris. NB support said to call if the problem comes back, even though I have left the checkpoints enabled. I think they just want to know if it failed. If I get failures now, my only recourse is to disable checkpoints, leave the pre-4 patches, and wait patiently for MP4. Wow. 70 policy failures I bet that was annoying. -Jon I wish I would have gotten this thread on Friday, before I enabled checkpoint restart on all 70 policies and spent all Monday freaking out. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jon Bousselot Sent: Monday, October 23, 2006 2:13 PM To: Ed Wilts Cc: veritas mailing list Subject: Re: [Veritas-bu] 6.0 scheduler issues An update on the support ticket... After submitting logs and various other things requested by support, the suggested solutions to my problem are: 1. Delete the pempersist file on a regular basis. 2. Disable checkpoints in the backup policy (this seems to be a major contributor to the problem) 3. Install some PRE-MP4 engineering patches that were granted only after the case was escalated. It is two files that you just replace and relaunch netbackup. 4. Disable checkpoints and wait for MP4 which should be released in November 2006. I have been deleting pempersist, and the problem goes away for five to fourteen days. Adding the engineering patches worked fine, but it has been less than a week, so I'll be watching the activity log closely. I really depend on checkpoints because I'm backing up millions of files on windows systems, and it takes a long time. -Jon On 9/12/2006 1:10 PM, Jon Bousselot wrote: That tech doc doesn't describe my problem exactaly, but I'm having a bug in 6.0mp3 where jobs don't run for weeks, Log a call. There are so many bugs in the stock MP3 scheduler that you'll need tech support to tell you if it's fixed in the currently-available binaries or if your issue is diferent. .../Ed -- Ed Wilts, Mounds View, MN, USA mailto:[EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu CONFIDENTIALITY NOTICE: This email may contain confidential and privileged material for the sole use of the intended recipient(s). Any review, use, distribution or disclosure by others is strictly prohibited. If you have received this communication in error, please notify the sender immediately by email and delete the message and any file attachments from your computer. Thank you. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] problems with NDMP restore: error 49
Hi all,I'm running into a bit of a problem.We're doing a DR rehearsal. The catalog restore to our Netbackup 6 mp3 server failed. We had to import our tapes. When we attempt a restore to our Netbackup filer using NDMP we got an error 49 10/25/2006 8:34:02 PM - Error bpbrm(pid=1051) client felix didn't start 10/25/2006 8:34:02 PM - Error bpbrm(pid=1051) client restore EXIT STATUS 49: client did not start 10/25/2006 8:34:36 PM - end Restore; elapsed time: 00:00:36Now the odd thing is that a filer backup/restore over NDMP does not require a client.Any thoughts? We only have another 12 hours to resolve this before our rehearsal ends, so any assistance you can offer would be appreciated. Regards,Adam ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] LTO3 Drivers - HP ESL
Title: Message Hi jon Sadly not, which is why we ended up going down the HP Route - Veritas are happy for us to use HP drivers but it just looks like they have not been updated in a while. Regards Simon Weaver3rd Line Technical SupportWindows Domain Administrator EADS Astrium Limited, B23AA IM (DCS)Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message-From: Dyck, Jonathan [mailto:[EMAIL PROTECTED] Sent: 25 October 2006 18:03To: WEAVER, Simon; veritas-bu@mailman.eng.auburn.eduSubject: RE: [Veritas-bu] LTO3 Drivers - HP ESL Are the VERITAS drivers not working for you? I use 960's, and the 5.1 VERITAS driver is working just fine for me. Should be on any NBU 5.x install CD under "Additional Products" or somesuch. Let me know if you needs exacts... Cheers, Jon From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WEAVER, SimonSent: Wednesday, October 25, 2006 12:25 PMTo: 'veritas-bu@mailman.eng.auburn.edu'Subject: [Veritas-bu] LTO3 Drivers - HP ESL Hi Guys Wonder if I could get some assistance? Have a HP ESL-322e Robotic Library using Ultrium 960 Drives I have a driver on them, but they are dated 2004 !! I cannot for the life of me find any NEW drivers for LTO3 Drives! Would anyone happen to have a link or possibly provide some help - I am still working on some odd issues within NBU, and drivers are the last resort. Thanks Regards Simon Weaver3rd Line Technical SupportWindows Domain Administrator EADS Astrium Limited, B23AA IM (DCS)Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified.-Astrium Limited, Registered in England and Wales No. 2449259Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England This message may contain privileged and/or confidential information. If you have received this e-mail in error or are not the intended recipient, you may not use, copy, disseminate or distribute it; do not open any attachments, delete it immediately from your system and notify the sender promptly by e-mail that you have done so. Thank you. This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. - Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] 6.0 advantages?
Title: Message Forgive me if I am wrong, but doesnt 5.x offer the same functionaility of failed backups (retry!) Because that is what I am seeing here, in a 5.1 environment.. As long as the window is open, the backups re-try until the threshold hits the limit or the backup completes. Regards Simon Weaver3rd Line Technical SupportWindows Domain Administrator EADS Astrium Limited, B23AA IM (DCS)Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message-From: Brandon Zermeno [mailto:[EMAIL PROTECTED] Sent: 25 October 2006 19:14To: Hindle, Greg; NB List MailSubject: Re: [Veritas-bu] 6.0 advantages? In an environment with multiple media servers you only have to recover the Master in a DR. This allows us to be up and recovering any server in the 2 hours it takes to recover the catalog. If a media server is needed for throughput you can do a basic install of Veritas on it and be up and running. With all the data on the Master the media servers do not need any data recovered to be functional. I like the way it auto restarts failed jobs, but it bit me last night when a job tried to run 5 times and now I have 23 failures on the report for 1 server. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Hindle, GregSent: Wednesday, October 25, 2006 9:49 AMTo: NB List MailSubject: [Veritas-bu] 6.0 advantages? What advantages do you see in 6.x over 5.x? What things are better and easier etc. I need to get some points to be used for planning a 6.0 upgrade. Greg This e-mail and any attachments are confidential, may contain legal, professional or other privileged information, and are intended solely for the addressee. If you are not the intended recipient, do not use the information in this e-mail in any way, delete this e-mail and notify the sender. CEG-IP1 CONFIDENTIALITY NOTICE: This email may contain confidential and privileged material for the sole use of the intended recipient(s). Any review, use, distribution or disclosure by others is strictly prohibited. If you have received this communication in error, please notify the sender immediately by email and delete the message and any file attachments from your computer. Thank you. This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. - Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] 6.0 advantages?
Title: Message Greg First advantage I see is that 5.x is more stable than 6.0! :-) Suggest you wait for the latest MP to come out, read comments on the list, and also on the Symantec forums. Regards Simon Weaver3rd Line Technical SupportWindows Domain Administrator EADS Astrium Limited, B23AA IM (DCS)Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message-From: Hindle, Greg [mailto:[EMAIL PROTECTED] Sent: 25 October 2006 17:49To: NB List MailSubject: [Veritas-bu] 6.0 advantages? What advantages do you see in 6.x over 5.x? What things are better and easier etc. I need to get some points to be used for planning a 6.0 upgrade. Greg This e-mail and any attachments are confidential, may contain legal, professional or other privileged information, and are intended solely for the addressee. If you are not the intended recipient, do not use the information in this e-mail in any way, delete this e-mail and notify the sender. CEG-IP1 This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. - Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
