[Veritas-bu] Different drive types with one robot
Hello, We have IBM tape library with LTO-2 drives and planing to add LTO-3 drives and LTO-3 tapes to it. How to configure netbackup infrastructure to use different drive types with single robot? Does Drive wizard detect new drives correctly or we need add drives manually? Is new volume group fot LTO-3 needed for tape operations? Thank you very much, Sergey ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Different drive types with one robot
Go into your barcode rules add something like. ##L2 - hcart2 (current) Scratch ##L3 - hcart3 (new rule) Scratch You might want to get rid of a DEFAULT rule in this case. Netbackup will only use hcart2 media with hcart2 tape drives and 3 with 3 etc... Depending on your version it might say 1/2 inch cartridge (hcart.) -Jonathan From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Evsyukov, Sergey Sent: Monday, August 27, 2007 4:16 AM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Different drive types with one robot Hello, We have IBM tape library with LTO-2 drives and planing to add LTO-3 drives and LTO-3 tapes to it. How to configure netbackup infrastructure to use different drive types with single robot? Does Drive wizard detect new drives correctly or we need add drives manually? Is new volume group fot LTO-3 needed for tape operations? Thank you very much, Sergey ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Different drive types with one robot
Good Morning Sergey, The answers are it depends. You have to make sure that you do not have the system try to load a LTO-3 tape into a LTO-2 tape drive. A simple method if you have the IBM 3584 tape library is to define a new virtual library for the LTO-3 tape drives and treat them as two libraries in netbackup. That is a new storage unit, and the lto-2 and lto-3 tapes and tape drives would have different media settings (for example hcart2 and hcart3). We have not tried it yet, but it would seem that one could have one virtual library with two different storage units with the tape drives and tape media set to different media settings. One would also require bar code rules to assign new tapes to the correct media settings. I am guessing that this would require different volume pools. It would be nice if netbackup could handle the fact that the tape drive can write to two different media types, and read three different media types. len From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Evsyukov, Sergey Sent: Monday, August 27, 2007 4:16 AM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Different drive types with one robot Hello, We have IBM tape library with LTO-2 drives and planing to add LTO-3 drives and LTO-3 tapes to it. How to configure netbackup infrastructure to use different drive types with single robot? Does Drive wizard detect new drives correctly or we need add drives manually? Is new volume group fot LTO-3 needed for tape operations? Thank you very much, Sergey ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] configure mail alert in netbackup
Dear Friend I have installed netbackup 6.0+ mp4 patch in solaris server.The Netbackup server ipaddress has been added in smtp server .I need to configure email alert for all the netbackup jobs to xxx email id. how to configure it. I have a doubt whether i need to make changes either in backup_exit_scripts or mail_bp_reports or in both files. Pls guide me to resolve this issue. Regards Friend - Shape Yahoo! in your own image. Join our Network Research Panel today!___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Different drive types with one robot
Hello Len, Thank you for reply, would you please advise how i can define virtual library? Should i add new robot witth tpconfig to master server? Sergey From: Len Boyle [mailto:[EMAIL PROTECTED] Sent: Monday, August 27, 2007 4:39 PM To: Evsyukov, Sergey; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] Different drive types with one robot Good Morning Sergey, The answers are it depends. You have to make sure that you do not have the system try to load a LTO-3 tape into a LTO-2 tape drive. A simple method if you have the IBM 3584 tape library is to define a new virtual library for the LTO-3 tape drives and treat them as two libraries in netbackup. That is a new storage unit, and the lto-2 and lto-3 tapes and tape drives would have different media settings (for example hcart2 and hcart3). We have not tried it yet, but it would seem that one could have one virtual library with two different storage units with the tape drives and tape media set to different media settings. One would also require bar code rules to assign new tapes to the correct media settings. I am guessing that this would require different volume pools. It would be nice if netbackup could handle the fact that the tape drive can write to two different media types, and read three different media types. len From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Evsyukov, Sergey Sent: Monday, August 27, 2007 4:16 AM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Different drive types with one robot Hello, We have IBM tape library with LTO-2 drives and planing to add LTO-3 drives and LTO-3 tapes to it. How to configure netbackup infrastructure to use different drive types with single robot? Does Drive wizard detect new drives correctly or we need add drives manually? Is new volume group fot LTO-3 needed for tape operations? Thank you very much, Sergey ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] configure mail alert in netbackup
On Mon, 27 Aug 2007, ramaswamy savi wrote: Dear Friend I have installed netbackup 6.0+ mp4 patch in solaris server.The Netbackup server ipaddress has been added in smtp server .I need to configure email alert for all the netbackup jobs to xxx email id. how to configure it. I have a doubt whether i need to make changes either in backup_exit_scripts or mail_bp_reports or in both files. Pls guide me to resolve this issue. Regards Friend - Shape Yahoo! in your own image. Join our Network Research Panel today! You can set the e-mail alerts in 3 places. 1. for backups 2. for restores 3. on the client itself and check [x] server sends mail ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] bplist syntax for windows
Hi, Can anybody help me with the bplist command for searching a keyword in a windows client backups. I have tried using the man page for bplist command but the command is errored out with No entity found e.g: i want to search for files with keyword AGD00 for windows nt client Saturn E:\ drive (all the backups since 2005) I am using Netbackup 5.1 on Unix Any help will be greatly appreciated thanks, John +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Linux on AMD x64 Media servers
Anyone having any issue with media servers (5.x or 6.x) running on AMD x64 (dual core) boxes? Aside from the old SCSI reserve issue, which shouldn't be an issue in a non SSO env.. What were you running before? Currently looking at evolution options to replace the existing V240s running Solaris 8. contenders are currently T2000s running Solaris 10, or V40Z (or similar 4x dual core AMD x64 box) running RHEL. Paul La version française suit le texte anglais. This email may contain privileged and/or confidential information, and the Bank of Canada does not waive any related rights. Any distribution, use, or copying of this email or the information it contains by other than the intended recipient is unauthorized. If you received this email in error please delete it immediately from your system and notify the sender promptly by email that you have done so. Le présent courriel peut contenir de l'information privilégiée ou confidentielle. La Banque du Canada ne renonce pas aux droits qui s'y rapportent. Toute diffusion, utilisation ou copie de ce courriel ou des renseignements qu'il contient par une personne autre que le ou les destinataires désignés est interdite. Si vous recevez ce courriel par erreur, veuillez le supprimer immédiatement et envoyer sans délai à l'expéditeur un message électronique pour l'aviser que vous avez éliminé de votre ordinateur toute copie du courriel reçu. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] bplist syntax for windows
On Mon, 27 Aug 2007, nbujohnson wrote: Hi, Can anybody help me with the bplist command for searching a keyword in a windows client backups. I have tried using the man page for bplist command but the command is errored out with No entity found e.g: i want to search for files with keyword AGD00 for windows nt client Saturn E:\ drive (all the backups since 2005) I am using Netbackup 5.1 on Unix Any help will be greatly appreciated thanks, John +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu What command are you currently using/ what syntax? ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] 10GB network + perf questions etc
On Sun, 26 Aug 2007, Curtis Preston wrote: If it's the card I'm thinking about the TCP checksum is already offload to hardware. In fact most gigaswift cards support this today with 1 Gbit technology. Offloading the checksum is not the same as a full TCP offload. A true TOE card offloads ALL TCP processing, not just the checksum. I think a great deal of tuning would be required to achieve anywhere near 10 GB w/ a single TCP stream. I think you can tune your heart out and you'll never get anywhere close. Maybe it's possible with a TOE card, but I haven't heard from anyone yet. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu I am still waiting for someone to report 250 MiB/s with RHEL3/4/5 using 10GBps NICs. Then I'd like to know how they optimized their cards :) Justin. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Linux on AMD x64 Media servers
I have run 5.1 and now 6.0MP4 media servers with AMD x64 dual core boxes; mind you with RHEL3 32bit though. Justin. On Mon, 27 Aug 2007, Paul Keating wrote: Anyone having any issue with media servers (5.x or 6.x) running on AMD x64 (dual core) boxes? Aside from the old SCSI reserve issue, which shouldn't be an issue in a non SSO env.. What were you running before? Currently looking at evolution options to replace the existing V240s running Solaris 8. contenders are currently T2000s running Solaris 10, or V40Z (or similar 4x dual core AMD x64 box) running RHEL. Paul La version française suit le texte anglais. This email may contain privileged and/or confidential information, and the Bank of Canada does not waive any related rights. Any distribution, use, or copying of this email or the information it contains by other than the intended recipient is unauthorized. If you received this email in error please delete it immediately from your system and notify the sender promptly by email that you have done so. Le présent courriel peut contenir de l'information privilégiée ou confidentielle. La Banque du Canada ne renonce pas aux droits qui s'y rapportent. Toute diffusion, utilisation ou copie de ce courriel ou des renseignements qu'il contient par une personne autre que le ou les destinataires désignés est interdite. Si vous recevez ce courriel par erreur, veuillez le supprimer immédiatement et envoyer sans délai à l'expéditeur un message électronique pour l'aviser que vous avez éliminé de votre ordinateur toute copie du courriel reçu.___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] bplist syntax for windows
Hello John Think that you may be missing the -t 13 option for windows backup Regards Michael 2007/8/27, nbujohnson [EMAIL PROTECTED]: Hi, Can anybody help me with the bplist command for searching a keyword in a windows client backups. I have tried using the man page for bplist command but the command is errored out with No entity found e.g: i want to search for files with keyword AGD00 for windows nt client Saturn E:\ drive (all the backups since 2005) I am using Netbackup 5.1 on Unix Any help will be greatly appreciated thanks, John +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Linux on AMD x64 Media servers
Which model of box? Paul -- -Original Message- From: Justin Piszcz [mailto:[EMAIL PROTECTED] Sent: August 27, 2007 10:34 AM To: Paul Keating Cc: VERITAS-BU@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Linux on AMD x64 Media servers I have run 5.1 and now 6.0MP4 media servers with AMD x64 dual core boxes; mind you with RHEL3 32bit though. Justin. La version française suit le texte anglais. This email may contain privileged and/or confidential information, and the Bank of Canada does not waive any related rights. Any distribution, use, or copying of this email or the information it contains by other than the intended recipient is unauthorized. If you received this email in error please delete it immediately from your system and notify the sender promptly by email that you have done so. Le présent courriel peut contenir de l'information privilégiée ou confidentielle. La Banque du Canada ne renonce pas aux droits qui s'y rapportent. Toute diffusion, utilisation ou copie de ce courriel ou des renseignements qu'il contient par une personne autre que le ou les destinataires désignés est interdite. Si vous recevez ce courriel par erreur, veuillez le supprimer immédiatement et envoyer sans délai à l'expéditeur un message électronique pour l'aviser que vous avez éliminé de votre ordinateur toute copie du courriel reçu. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] 10GB network + perf questions etc
I am still waiting for someone to report 250 MiB/s with RHEL3/4/5 using 10GBps NICs. I'm waiting for anyone to report 250 MB/s on any platform. ;) ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Re: bplist syntax for windows
I am using : bplist -B -C Saturn -t 13 -keyword AGD00 -s 01/01/2005 -e 08/20/2007 -nt_files \E\ is this the correct syntax Justin Piszcz wrote: On Mon, 27 Aug 2007, nbujohnson wrote: Hi, Can anybody help me with the bplist command for searching a keyword in a windows client backups. I have tried using the man page for bplist command but the command is errored out with No entity found e.g: i want to search for files with keyword AGD00 for windows nt client Saturn E:\ drive (all the backups since 2005) I am using Netbackup 5.1 on Unix Any help will be greatly appreciated thanks, John +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu What command are you currently using/ what syntax? ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Re: bplist syntax for windows
No ,I have tried using -t 13 option also but the result is still same Thanks, Michael Graff Andersen wrote: Hello John Think that you may be missing the -t 13 option for windows backup Regards Michael 2007/8/27, nbujohnson [EMAIL PROTECTED]: Hi, Can anybody help me with the bplist command for searching a keyword in a windows client backups. I have tried using the man page for bplist command but the command is errored out with No entity found e.g: i want to search for files with keyword AGD00 for windows nt client Saturn E:\ drive (all the backups since 2005) I am using Netbackup 5.1 on Unix Any help will be greatly appreciated thanks, John +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Anyone successfully implemented VXSS?
Everything I read out on the web suggests the setting up of VXSS is a perilous task. Has anyone successfully set it up? Thanks, Kyle ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] bplist syntax for windows
On Mon, 27 Aug 2007, nbujohnson wrote: I am using : bplist -B -C Saturn -t 13 -keyword AGD00 -s 01/01/2005 -e 08/20/2007 -nt_files \E\ is this the correct syntax Hi, Try this instead: bplist -B -C Saturn -t 13 -R 99 -l -s 01/01/2005 / Let me know if this works for you. Justin. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Anyone successfully implemented VXSS?
On Mon, 27 Aug 2007, Kyle Oliver wrote: Everything I read out on the web suggests the setting up of VXSS is a perilous task. Has anyone successfully set it up? Thanks, Kyle ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu Or the real question, what are you trying to Achieve? You may want to use NBU Reporter or NBU NOM and assign lower levels of permission that way. Justin. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] bplist syntax for windows
Did you give my command a try? On Mon, 27 Aug 2007, nbujohnson wrote: No ,I have tried using -t 13 option also but the result is still same Thanks, Michael Graff Andersen wrote: Hello John Think that you may be missing the -t 13 option for windows backup Regards Michael 2007/8/27, nbujohnson [EMAIL PROTECTED]: Hi, Can anybody help me with the bplist command for searching a keyword in a windows client backups. I have tried using the man page for bplist command but the command is errored out with No entity found e.g: i want to search for files with keyword AGD00 for windows nt client Saturn E:\ drive (all the backups since 2005) I am using Netbackup 5.1 on Unix Any help will be greatly appreciated thanks, John +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Re: bplist syntax for windows
Yes this is working ,but how can i search for keyword in aprticular drive ? Thanks for your help Justin Regds, John Justin Piszcz wrote: Did you give my command a try? On Mon, 27 Aug 2007, nbujohnson wrote: No ,I have tried using -t 13 option also but the result is still same Thanks, Michael Graff Andersen wrote: Hello John Think that you may be missing the -t 13 option for windows backup Regards Michael 2007/8/27, nbujohnson [EMAIL PROTECTED]: Hi, Can anybody help me with the bplist command for searching a keyword in a windows client backups. I have tried using the man page for bplist command but the command is errored out with No entity found e.g: i want to search for files with keyword AGD00 for windows nt client Saturn E:\ drive (all the backups since 2005) I am using Netbackup 5.1 on Unix Any help will be greatly appreciated thanks, John +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Different drive types with one robot
You can put both in the same library. I have IBM 3584 with both LTO-2 and LTO-3, same partition. I have done ADIC i2K with both in the same partition. Same for ADIC i500. If the library can support it, NetBackup will use it. The different drive types will automatically create a new volume group. My 3584 shows 00_000_TLD for the LTO-2 drives, and 01_000_TLD for the LTO-3 drives. If you use Vault, it will have to have a new vault policy since Vault depends on the volume group (I spent over 1 week trying to figure that out). You can not have your default Barcode rule distinguish between the media types unless you do something unique in the first 6 Characters. I tried but could not get it to work and the opened a case with Veritas. They told me I could not do it and still not trash my media pool as exists. It you change how your bar codes are read (by shifting the bar code reading rules), you will put every tape that you have in the scratch pool. You could partition your library, but then you have to allocate/dedicate slots and MAIL SLOTs to each partition. The mail slots get to be tricky. If someone puts the wrong tape in the wrong mail slot, it will go into the wrong robot. The comment below about only using hcart2 media is an hcart2 drive is correct. However, NetBackup does not enforce what you call the drive. You can define an LTO-3 tape drive to be an hcart tape drive in NetBackup. It does not use the labeled definitions for anything except putting the same media type in the drive type. I will be putting in LTO-4 drives this month in an IBM library. There is no hcart4 drive type. I will have to define them as hcart2 drives because the folks that initially set up the NetBackup envirionment defined the LTO-2 drives as hcart. The LTO-3's are now hcart3's. The only thing that I have left is hcart2. Of course I could define them as DLT, but that would probably confuse someone down the road. To read backward capatibilty, just toggle the drive type, load the tape, do what you need to do, unload the tape, toggle the drive to what you need it to be. Not a hard or long process. -- Original message -- From: Martin, Jonathan [EMAIL PROTECTED] Go into your barcode rules add something like. ##L2 - hcart2 (current) Scratch ##L3 - hcart3 (new rule) Scratch You might want to get rid of a DEFAULT rule in this case. Netbackup will only use hcart2 media with hcart2 tape drives and 3 with 3 etc... Depending on your version it might say 1/2 inch cartridge (hcart.) -Jonathan From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Evsyukov, Sergey Sent: Monday, August 27, 2007 4:16 AM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Different drive types with one robot Hello, We have IBM tape library with LTO-2 drives and planing to add LTO-3 drives and LTO-3 tapes to it. How to configure netbackup infrastructure to use different drive types with single robot? Does Drive wizard detect new drives correctly or we need add drives manually? Is new volume group fot LTO-3 needed for tape operations? Thank you very much, Sergey ---BeginMessage--- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ---End Message--- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] bplist syntax for windows
On Mon, 27 Aug 2007, nbujohnson wrote: Yes this is working ,but how can i search for keyword in aprticular drive ? Thanks for your help Justin Regds, John The keyword is supposed to work, I am also having some issues with it. Normally I just dump everything to a file then grep for what I am trying to locate. Justin. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Anyone successfully implemented VXSS?
I am currently in the process of testing VXSS, and it is somewhat painful. I have it setup and working correctly with most default settings. In permissions of the user groups you cannot select just to allow a group to restart and resume jobs from activity monitor. You have to select everything under Operate and cannot select individual permissions under that. I have tried to setup custom permissions sets, they appear to be correct but I am unable to use them. There are also about 5 different documents about setting up VXSS on the Symantec support site, each varying slightly. I have it running on a solaris 9 master and have aix and windows media all working with vxss, if I could figure out a way to define custom permission sets this would be great product. Jared M. Seaton Recovery Administrator Mylan Laboratories Inc. 304-554-5926 304-685-1389 (Cell) Justin Piszcz [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] 08/27/2007 12:06 PM To Kyle Oliver [EMAIL PROTECTED] cc veritas-bu@mailman.eng.auburn.edu Subject Re: [Veritas-bu] Anyone successfully implemented VXSS? On Mon, 27 Aug 2007, Kyle Oliver wrote: Everything I read out on the web suggests the setting up of VXSS is a perilous task. Has anyone successfully set it up? Thanks, Kyle ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu Or the real question, what are you trying to Achieve? You may want to use NBU Reporter or NBU NOM and assign lower levels of permission that way. Justin. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu == CONFIDENTIALITY NOTICE: This e-mail message and all attachments transmitted with it may contain legally privileged, proprietary and/or confidential information intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution, duplication or other use of this message and/or its attachments is strictly prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message and its attachments. Thank you. == ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Anyone successfully implemented VXSS?
I would agree it is painful. Not to mention you probably don't want to install it on the master server lest it hoark your configuration files (I am running on Solaris 10). There's also no way to use NIS (or the support folks are not aware of how to do it). So you effectively need to create accounts for each user you want to have access. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, August 27, 2007 9:36 AM To: Justin Piszcz Cc: Kyle Oliver; veritas-bu@mailman.eng.auburn.edu; [EMAIL PROTECTED] Subject: Re: [Veritas-bu] Anyone successfully implemented VXSS? I am currently in the process of testing VXSS, and it is somewhat painful. I have it setup and working correctly with most default settings. In permissions of the user groups you cannot select just to allow a group to restart and resume jobs from activity monitor. You have to select everything under Operate and cannot select individual permissions under that. I have tried to setup custom permissions sets, they appear to be correct but I am unable to use them. There are also about 5 different documents about setting up VXSS on the Symantec support site, each varying slightly. I have it running on a solaris 9 master and have aix and windows media all working with vxss, if I could figure out a way to define custom permission sets this would be great product. Jared M. Seaton Recovery Administrator Mylan Laboratories Inc. 304-554-5926 304-685-1389 (Cell) Justin Piszcz [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] 08/27/2007 12:06 PM To Kyle Oliver [EMAIL PROTECTED] cc veritas-bu@mailman.eng.auburn.edu Subject Re: [Veritas-bu] Anyone successfully implemented VXSS? On Mon, 27 Aug 2007, Kyle Oliver wrote: Everything I read out on the web suggests the setting up of VXSS is a perilous task. Has anyone successfully set it up? Thanks, Kyle ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu Or the real question, what are you trying to Achieve? You may want to use NBU Reporter or NBU NOM and assign lower levels of permission that way. Justin. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu == CONFIDENTIALITY NOTICE: This e-mail message and all attachments transmitted with it may contain legally privileged, proprietary and/or confidential information intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution, duplication or other use of this message and/or its attachments is strictly prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message and its attachments. Thank you. == -- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Different Ways to Install Client Software
All, Ok, I am starting to run into annoying problems. I used to install my new clients using rcp. Well my company started disabling rsh on all server (rightfully so). Well, I modified the install_client_software script and replaced the rcp,rsh with scp, ssh and it worked great! I also would use ftp to install the client when necessary. Well, now they are turning off ftp on all servers. For some reason, the ssh install that used to work, no longer does?!?! I can ssh to the servers by hand, but not using the script. Anyway, my question is what other ways are there to install the client software on a Solaris 8/9/10 box? Or a Linux server? Kevin Whittaker Syniverse Technologies Systems Engineer - UNIX Admin ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Different Ways to Install Client Software
You can do the automated stuff using scp (or sftp) to your system as they use the same ssh setup. The most appropriate way to do this would be get the public key from your server that you're pushing the software out from and putting it in the authorized keys file on the servers where you're pushing to. This way it doesn't prompt for a password at all. Obviously you need to restrict who has access to the account you're pushing out from on the first server. I've been in more than one place where we created a security server so that only the admins had access to it and it was where we would push things out from. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Whittaker Sent: Monday, August 27, 2007 1:34 PM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Different Ways to Install Client Software All, Ok, I am starting to run into annoying problems. I used to install my new clients using rcp. Well my company started disabling rsh on all server (rightfully so). Well, I modified the install_client_software script and replaced the rcp,rsh with scp, ssh and it worked great! I also would use ftp to install the client when necessary. Well, now they are turning off ftp on all servers. For some reason, the ssh install that used to work, no longer does?!?! I can ssh to the servers by hand, but not using the script. Anyway, my question is what other ways are there to install the client software on a Solaris 8/9/10 box? Or a Linux server? Kevin Whittaker Syniverse Technologies Systems Engineer - UNIX Admin ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Logging and security...
Hi, I would like to get some logging in nbu, which traces who makes restore, of what, when and to what destination etc. And also who makes changes in policies and other nbu configs. Are there any logs like this available in nbu? One could hope, now that Symantec owns nbu, they start thinking about security for us backup admins and serious logging. Thanks and regards, Hampus Lind Rikspolisstyrelsen National Police Board Tel dir: +46 (0)8 - 401 99 43 Tel mob: +46 (0)70 - 217 92 66 E-mail: mailto:[EMAIL PROTECTED] [EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Logging and security...
Have you looked at NEtBackup Operations Manager (NOM)? On Mon, 27 Aug 2007, Hampus Lind wrote: Hi, I would like to get some logging in nbu, which traces who makes restore, of what, when and to what destination etc. And also who makes changes in policies and other nbu configs. Are there any logs like this available in nbu? One could hope, now that Symantec owns nbu, they start thinking about security for us backup admins and serious logging. Thanks and regards, Hampus Lind Rikspolisstyrelsen National Police Board Tel dir: +46 (0)8 - 401 99 43 Tel mob: +46 (0)70 - 217 92 66 E-mail: mailto:[EMAIL PROTECTED] [EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Different Ways to Install Client Software
Each machine/OS type has its own install_client script that needs to be changed from RSH to SSH. I also found that it worked much better when I used OpenSSH. SunSSH was horrid. You also need to make sure agent-forwarding is enabled. If you are already using SSH for administration, using it for netbackup installs is trivial. It is certainly a lot easier than installing from CD. Austin On 8/27/07, Kevin Whittaker [EMAIL PROTECTED] wrote: All, Ok, I am starting to run into annoying problems. I used to install my new clients using rcp. Well my company started disabling rsh on all server (rightfully so). Well, I modified the install_client_software script and replaced the rcp,rsh with scp, ssh and it worked great! I also would use ftp to install the client when necessary. Well, now they are turning off ftp on all servers. For some reason, the ssh install that used to work, no longer does?!?! I can ssh to the servers by hand, but not using the script. Anyway, my question is what other ways are there to install the client software on a Solaris 8/9/10 box? Or a Linux server? Kevin Whittaker Syniverse Technologies Systems Engineer - UNIX Admin ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Splitting network Traffic
Can I split backup network traffic over two NICS? I know I can specify backup traffic go over a different NIC than regular network traffic. kww ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Logging and security...
Nope.. Does it log nbu users activity? I thought it was just a monitoring/reporting tool. I will check it out.. Thanks, Hampus Lind Rikspolisstyrelsen National Police Board Tel dir: +46 (0)8 - 401 99 43 Tel mob: +46 (0)70 - 217 92 66 E-mail: [EMAIL PROTECTED] -Ursprungligt meddelande- Från: Justin Piszcz [mailto:[EMAIL PROTECTED] Skickat: den 27 augusti 2007 21:15 Till: Hampus Lind Kopia: VERITAS-BU@mailman.eng.auburn.edu Ämne: Re: [Veritas-bu] Logging and security... Have you looked at NEtBackup Operations Manager (NOM)? On Mon, 27 Aug 2007, Hampus Lind wrote: Hi, I would like to get some logging in nbu, which traces who makes restore, of what, when and to what destination etc. And also who makes changes in policies and other nbu configs. Are there any logs like this available in nbu? One could hope, now that Symantec owns nbu, they start thinking about security for us backup admins and serious logging. Thanks and regards, Hampus Lind Rikspolisstyrelsen National Police Board Tel dir: +46 (0)8 - 401 99 43 Tel mob: +46 (0)70 - 217 92 66 E-mail: mailto:[EMAIL PROTECTED] [EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Notify Scripts (without sending on retries)
Has anyone had experience with using NetBackup notify scripts in such a way that they do not send e-mails for a job until all retries have been exhausted? I've tried both bpend_notify on the client and backup_exit_notify on the master server, and both version send out alerts for each attempt of the job, where I only want to know what the *final* status of the job was. I checked the archives but had difficulty in narrowing down the search to this situation. Brian Beaird ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Notify Scripts (without sending on retries)
You can try using these scripts, in windows version they are located C:\Program Files\VERITAS\NetBackup\bin\ parent_start_notify.cmd parent_end_notify.cmd Doug Preston Systems Engineer Land America Tax and Flood Services Phone 626-339-5221 Ext 1104 Email [EMAIL PROTECTED] NOTICE: This electronic mail transmission may constitute a communication that is legally privileged. It is not intended for transmission to, or receipt by, any unauthorized persons. If you have received this electronic mail transmission in error, please delete it from your system without copying it, and notify the sender by reply e-mail, so that our address record can be corrected. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, August 27, 2007 1:00 PM To: Veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Notify Scripts (without sending on retries) Has anyone had experience with using NetBackup notify scripts in such a way that they do not send e-mails for a job until all retries have been exhausted? I've tried both bpend_notify on the client and backup_exit_notify on the master server, and both version send out alerts for each attempt of the job, where I only want to know what the *final* status of the job was. I checked the archives but had difficulty in narrowing down the search to this situation. Brian Beaird ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Notify Scripts (without sending on retries)
Does anyone know if there is a unix version of these scripts? Our master server currently runs on hp-ux. -Original Message- From: Preston, Douglas L [mailto:[EMAIL PROTECTED] Sent: Monday, August 27, 2007 3:24 PM To: [EMAIL PROTECTED]; Veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] Notify Scripts (without sending on retries) You can try using these scripts, in windows version they are located C:\Program Files\VERITAS\NetBackup\bin\ parent_start_notify.cmd parent_end_notify.cmd Doug Preston Systems Engineer Land America Tax and Flood Services Phone 626-339-5221 Ext 1104 Email [EMAIL PROTECTED] NOTICE: This electronic mail transmission may constitute a communication that is legally privileged. It is not intended for transmission to, or receipt by, any unauthorized persons. If you have received this electronic mail transmission in error, please delete it from your system without copying it, and notify the sender by reply e-mail, so that our address record can be corrected. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, August 27, 2007 1:00 PM To: Veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Notify Scripts (without sending on retries) Has anyone had experience with using NetBackup notify scripts in such a way that they do not send e-mails for a job until all retries have been exhausted? I've tried both bpend_notify on the client and backup_exit_notify on the master server, and both version send out alerts for each attempt of the job, where I only want to know what the *final* status of the job was. I checked the archives but had difficulty in narrowing down the search to this situation. Brian Beaird ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Different Ways to Install Client Software
I use NFS mount of the software inside the firewall for Solaris. That may not work in your environment though Mount, install, unmount. For Windows we install using the windows \\server\directory mode = Carl Stehman IT Distributed Services Team Pepco Holdings, Inc. 202-331-6619 Pager 301-765-2703 [EMAIL PROTECTED] Kevin Whittaker [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] 08/27/2007 01:43 PM To veritas-bu@mailman.eng.auburn.edu cc Subject [Veritas-bu] Different Ways to Install Client Software All, Ok, I am starting to run into annoying problems. I used to install my new clients using rcp. Well my company started disabling rsh on all server (rightfully so). Well, I modified the install_client_software script and replaced the rcp,rsh with scp, ssh and it worked great! I also would use ftp to install the client when necessary. Well, now they are turning off ftp on all servers. For some reason, the ssh install that used to work, no longer does?!?! I can ssh to the servers by hand, but not using the script. Anyway, my question is what other ways are there to install the client software on a Solaris 8/9/10 box? Or a Linux server? Kevin Whittaker Syniverse Technologies Systems Engineer - UNIX Admin ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu This Email message and any attachment may contain information that is proprietary, legally privileged, confidential and/or subject to copyright belonging to Pepco Holdings, Inc. or its affiliates (PHI). This Email is intended solely for the use of the person(s) to which it is addressed. If you are not an intended recipient, or the employee or agent responsible for delivery of this Email to the intended recipient(s), you are hereby notified that any dissemination, distribution or copying of this Email is strictly prohibited. If you have received this message in error, please immediately notify the sender and permanently delete this Email and any copies. PHI policies expressly prohibit employees from making defamatory or offensive statements and infringing any copyright or any other legal right by Email communication. PHI will not accept any liability in respect of such communications. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Anyone successfully implemented VXSS?
Here is a guide that shows how to install on Solaris (9) and setting up NIS. I don't use NIS so I didn't do the NIS part. http://ftp.support.veritas.com/pub/support/products/NetBackup_Enterprise_Server/281626.pdf Jared M. Seaton Recovery Administrator Mylan Laboratories Inc. 304-554-5926 304-685-1389 (Cell) Ian Clements [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] 08/27/2007 01:14 PM To veritas-bu@mailman.eng.auburn.edu cc Subject Re: [Veritas-bu] Anyone successfully implemented VXSS? I would agree it is painful. Not to mention you probably don't want to install it on the master server lest it hoark your configuration files (I am running on Solaris 10). There's also no way to use NIS (or the support folks are not aware of how to do it). So you effectively need to create accounts for each user you want to have access. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, August 27, 2007 9:36 AM To: Justin Piszcz Cc: Kyle Oliver; veritas-bu@mailman.eng.auburn.edu; [EMAIL PROTECTED] Subject: Re: [Veritas-bu] Anyone successfully implemented VXSS? I am currently in the process of testing VXSS, and it is somewhat painful. I have it setup and working correctly with most default settings. In permissions of the user groups you cannot select just to allow a group to restart and resume jobs from activity monitor. You have to select everything under Operate and cannot select individual permissions under that. I have tried to setup custom permissions sets, they appear to be correct but I am unable to use them. There are also about 5 different documents about setting up VXSS on the Symantec support site, each varying slightly. I have it running on a solaris 9 master and have aix and windows media all working with vxss, if I could figure out a way to define custom permission sets this would be great product. Jared M. Seaton Recovery Administrator Mylan Laboratories Inc. 304-554-5926 304-685-1389 (Cell) Justin Piszcz [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] 08/27/2007 12:06 PM To Kyle Oliver [EMAIL PROTECTED] cc veritas-bu@mailman.eng.auburn.edu Subject Re: [Veritas-bu] Anyone successfully implemented VXSS? On Mon, 27 Aug 2007, Kyle Oliver wrote: Everything I read out on the web suggests the setting up of VXSS is a perilous task. Has anyone successfully set it up? Thanks, Kyle ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu Or the real question, what are you trying to Achieve? You may want to use NBU Reporter or NBU NOM and assign lower levels of permission that way. Justin. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu == CONFIDENTIALITY NOTICE: This e-mail message and all attachments transmitted with it may contain legally privileged, proprietary and/or confidential information intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution, duplication or other use of this message and/or its attachments is strictly prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message and its attachments. Thank you. == -- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu == CONFIDENTIALITY NOTICE: This e-mail message and all attachments transmitted with it may contain legally privileged, proprietary and/or confidential information intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution, duplication or other use of this message and/or its attachments is strictly prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message and its attachments. Thank you. == ___ Veritas-bu maillist -
Re: [Veritas-bu] Notify Scripts (without sending on retries)
Same thing, but its bpnotify_start and bpnotify_stop if I recall correctly, check the docs. Justin. On Mon, 27 Aug 2007, [EMAIL PROTECTED] wrote: Does anyone know if there is a unix version of these scripts? Our master server currently runs on hp-ux. -Original Message- From: Preston, Douglas L [mailto:[EMAIL PROTECTED] Sent: Monday, August 27, 2007 3:24 PM To: [EMAIL PROTECTED]; Veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] Notify Scripts (without sending on retries) You can try using these scripts, in windows version they are located C:\Program Files\VERITAS\NetBackup\bin\ parent_start_notify.cmd parent_end_notify.cmd Doug Preston Systems Engineer Land America Tax and Flood Services Phone 626-339-5221 Ext 1104 Email [EMAIL PROTECTED] NOTICE: This electronic mail transmission may constitute a communication that is legally privileged. It is not intended for transmission to, or receipt by, any unauthorized persons. If you have received this electronic mail transmission in error, please delete it from your system without copying it, and notify the sender by reply e-mail, so that our address record can be corrected. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, August 27, 2007 1:00 PM To: Veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Notify Scripts (without sending on retries) Has anyone had experience with using NetBackup notify scripts in such a way that they do not send e-mails for a job until all retries have been exhausted? I've tried both bpend_notify on the client and backup_exit_notify on the master server, and both version send out alerts for each attempt of the job, where I only want to know what the *final* status of the job was. I checked the archives but had difficulty in narrowing down the search to this situation. Brian Beaird ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Re: Backup failing - VERITAS
Closing thread, way too many people going off topic in here, wow what a response. +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Splitting network Traffic
Yes, but not in the same policy. Just create two policies, using separate storage units that are associated with different media servers on the different subnets. The two media server could be on the same physical machine that is addressed by alias names (e.g. backup01, backup02, both which reside on backup) Thanks, Rockey From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kenneth W Wilkinson Sent: Monday, August 27, 2007 2:23 PM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Splitting network Traffic Can I split backup network traffic over two NICS? I know I can specify backup traffic go over a different NIC than regular network traffic. kww ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
