Hi Forum,
Many times process remains on the Media server even after backup completes. Any
suggestion / permanent solution possible for this apart from manually killing
the process.
+--
|This was sent by [EMAIL PROTECTED] via
Sorry couldn't give you the complete information.
We have a master server with Netbackup 6.0 and 4 media server. This problem is
coming on 1 media server and with a particular client only. This client is
backed up over a WAN Link. Since we have our master server in 1 location and
media server
Hi Forum,
I have a setup of netbackup 6.5.1 having 1 master server and 4 media server
with Storagetek SL500 Library having 16 drives.
1 media server is having robotic arm configured on it with 5 drives.
2 media server is having 5 drives.
3 media server is having 6 drives.
My requirement is of
Hi forum,
I have a Master and 3 media server on solaris 9 having Netbackup 6.0 MP4.
Recently added new media server with solaris 10. Problem which i am facing is
when the load increases (Schedule starts) backup start failing with error code
89.
Experts need your help on this.
thanks
Sorry,
I didn't informed that i am having LTO3 drives. Other media server with Solaris
9 is having same settings which is giving a better output.
+--
|This was sent by [EMAIL PROTECTED] via Backup Central.
|Forward SPAM to
Do you have a SMTP server in your environment. If yes then just adding your
master server ip address in SMTP Server can help you out.
+--
|This was sent by [EMAIL PROTECTED] via Backup Central.
|Forward SPAM to [EMAIL
Steve,
Can you share what is the Number / Size of data buffers set in your environment.
+--
|This was sent by [EMAIL PROTECTED] via Backup Central.
|Forward SPAM to [EMAIL PROTECTED]
Hi Forum,
I need to remove 2 drives from one media server and configure it in other media
server.
Setup is of 6.0 Mp4 Master/media servers.
Can any one help with complete steps to be done.
Thanks
+--
|This was sent by
Even if you start 5 bprestore than 4 will wait till it completes the first
restore since the media will be comman for all 5 mount points.
Am i right forumpls. advice
+--
|This was sent by [EMAIL PROTECTED] via Backup
Curtis,
You mean to say if i start 5 restore all 5 of them will start writing at the
same time.
+--
|This was sent by [EMAIL PROTECTED] via Backup Central.
|Forward SPAM to [EMAIL PROTECTED]
Hi Forum,
I need to move Robotic Control from media server to master server.
My setup have 1 Master 6.0, 4 Media Server having 6.0 with SL500 Tape library.
Currently my robotic control is with 1 media server which needs to be moved to
Master server. Can any one list the steps for this.
Hi Savil,
We followed the same procedure as informed by you and it worked.
Now we are able to eject the medias and also getting new robot control host.
But one problem we are getting is error 98 for few backupsany suggestions
on this pls.
Hi Forum,
Any logs / file which is created when we do any changes in backup policy. Can
we see the earlier policy enteries and the new one.
Thanks In Advance
+--
|This was sent by [EMAIL PROTECTED] via Backup Central.
Hi Forum,
I need to eject media from library through solaris server attached to it.
Can someone help me with the command format for ejecting medias through solaris.
+--
|This was sent by [EMAIL PROTECTED] via Backup Central.
Dear Forum,
1) Can a single client have 2 master servers. Is it possible to backup a single
client through different master servers. If yes then pls inform the procedure.
2) How multiple master can have a single EMM server.
Thanks Regards
Any suggestions pls.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--
My aim is to have automated way.
I have tried successfully this on windows client but on unix i am not sure
whether i have to change the EMM server enteries every time i backup from
different masters.
+--
|This was sent by
But if i want the EMM to be different then what entry should come on the client
side.
EMM DB should be respective Master server only.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to
Hi Forum,
I have 3 Master servers having Solaris 9 10 as OS and NBU 6.0 MP4 6.0 MP 6.
Same needs to be monitored through Netbackup Administration Console.
I am able to get the first Master server but other 2 are not coming when i
change the server. Its giving the error as Unable to connect
Now i am getting all 3 MASTER through Windows Admin Console.
But the problem is for second and third MASTER (MASTERBKP2 ROMNETBK) i am
getting error as Unable to read configuration : operation requested by invalid
server.
And
Unable to connect to the Enterprise Media Manager server : The
Any ideas pls.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--
IS Aptare freeware
From where can i get it.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
Hi Forum,
Where can i get the clients / MP for all platform and for different NBU
versions.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com
Hi Forum,
I am trying to get one report which has following details of any policy.
Backup ID / Job IDClientBackup Date/Time
Policy Number of Files Kilobytes
Schedule NameSchedule Type
Dear Forum,
I am facing a problem for 1 particular policy of Windows.
In activity monitor it shows backup completed with KB and no of files.
But when i am checking the image in Restore or Catalog i am not getting it.
Even in Client backup it is not showing.
Can anyone help me out.
All the suggested checks was already done. In case if i am making a mistake in
putting the right details in Restore window how about Catalog.
I am not getting the image there also.
+--
|This was sent by
Hi Judy,
Tried but no luck.
You can check the details from following link uploaded for more info.
http://idcbackup.ril.com/EKMS.bmp
http://idcbackup.ril.com/EKMS1.bmp
http://idcbackup.ril.com/EKMS2.bmp[/img]
+--
|This was sent
Yes, correct i am looking out for specific date.
But when i went in the directory. There are files for that particular date.
# pwd
/opt/openv/netbackup/db/images/EKMS/123600
# cd ..
# ls -ltr
total 16
drwxr-xr-x 2 root other512 Mar 6 13:41 123000
drwxr-xr-x 2 root
Thanks for the enlightening suggestion.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--
Pls. find the contents of EKMS_1234601889_FULL
-
PROTOCOL_VERSION 2
START_TIME 0
END_TIME 0
SNAP_TIME 0
KBYTES 70320468
NUM_FRAGMENTS 18
COPIES 1
VERSION 7
CLIENT_TYPE 13
RETENTION_LEVEL 3
SCHEDULE_TYPE 0
COMPRESSION
Hi,
I get following output.
# bplist -C EKMS -t 13 -s 03/22/2009 00:00 -e 03/23/2009 00:00 -R /
EXIT STATUS 227: no entity was found
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to
Hi Forum,
Few clients thats gets fired during the backup cycle doesn't write anything and
remains ACTIVE for hours. It shows begin writing but no data transfer is seen.
Netbackup version is 6.0 MP6
Pls. help.
+--
|This was
Hi,
Mainly W2K3 Ent.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--
Hi,
I need to update MP6 on multiple clients (30 - UNIX, Window HP UX). Is there
any command through which i can do from Master server.
MASTER server is NBU 6.0 MP6 Solaris
I came accross update_clients but it's giving following error
Hi Forum,
I need to import medias on NBU 6.5.3 on which backup has taken place through
NBU 6.0 MP6. Both the server (Sun V890) has solaris 9.
Data size is approx 9.5 TB (20 Medias)
Request your kind suggestions to let me know the steps to import and then
restore
Hi Forum,
Facing a problem with a new windows client having Win2k3 SP2 32 bit OS, server
is under domain.
I have installed NBU 6.0 MP6 on it. From Solaris Master server i am able to
ping to the client ip and telnet to bpcd bprd. Verified all necessary
netbackup ports in services file
Hi,
I need logs for restoration. NBU is 6.5.
Can anyone help me with the path where the logs will be available for the
restore.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab
Hi Harpreet,
/usr/openv/netbackup/logs/user_ops/root/logs exists but there is no logs
available in it.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
Yes it exists before the restore started, but can't find any log files in this
path.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
Hi Forum,
I need a script that will give me successful backup figure during a period of
time for uniq clients.
Can anyone share the script or the procedure to do so pls.
+--
|This was sent by qureshiu...@rediffmail.com via
I need the number of clients which are successfully backed up between a period
of time say 18:00 hrs. to 18:00 hrs.
Currently i am using the following script
-
grep Policy: /tmp/bp_reports|uniq |grep -v Storage
But this will not take care of duplicate client ids.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
if streaming is used then i will be getting duplicate clients enteries in the
report for single backup.
Hope u get my point.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to
MDONALDSON : you have not given the script
JUDY : Would like to ask how do you take care of BCV Based backups in this
report format.
Suppose if i have 1 media server on which BCV of 10 different servers are
mounted and then backup is taken. How do you report that.
WRT BC Tape backup, In
Hi Forum,
I would like to know if BPADM can be scripted. The interactive response be set
as default value and we get the output through mail.
Pls. suggest.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
I need report option where in i will give current date as default value and
default time as 8:00 hrs.
The report which will be generated will act as a output for a script that gives
me the uniq client backed up number.
+--
Dear Forum,
I am planning of taking the NBU certification exams.
Mostly worked on 4.5 5.1, now currently on 6.5.3
Pls. help me out with ur advice with regard to the exams other than the
practise exams. Would appreciate any study docs or websites that I could use to
help me prepare
Have u got the sample tests.
Did u appeared for the certification!
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
Hi Forum,
Can anyone help me out with the process of taking SAN Based backup of Windows
server on any other platform (Solaris, Linux, HP-UX etc) master servers.
+--
|This was sent by qureshiu...@rediffmail.com via Backup
Try and select the exact image/files required to be restored.
Also check.
1) the server/host where you are restoring has Backup Master / Media server
enteries in host file.
2) check whether you are able to ping to this server.
3) Whether any firewall in between the network.
Hi Forum,
I need to verify the indiviual filesystem backed up for a particular policy.
Ex. If i have 3 filesytem in a policy C:\, D:\ E:\ and...
if there is no multistreaming enabled on policy level then if backup of any
particular drive does not happen then how can we come to know.
Is there
Dear Members,
My question was in context with error code 71 (none of the filesystem exists).
Since this i have tested that if any 1 filesystem does not exists on the host
and if others are. Then it does not give any error msg and status shows as 0.
Only if multistreaming is enabled then we
Hi Forum,
Need to upgrade NBU from 6.0MP6 to 6.5.3 (Solaris).
Catalog is on SAN.
Pls. inform the steps/pre-requistes, if any for upgradation.
Any help/suggestion appreciated.
+--
|This was sent by qureshiu...@rediffmail.com
Hi Forum,
Facing problem with SL500 Tape library as it goes in hang state and no medias
get mounted. All backup remains in queue.
This is observed once in 2 days time.
During problem Console also doesn't fetches any data from library. Only after
rebooting the library it does.
Following
We too have a similar environment.
Firewall policy needs to be opened for media server for interprocess
communication between Master and Media.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM
SLCONSOLE : When the problem is there it doesn't gives any report and throws an
error.
Robtest : gives the same error message which i had mentioned in my earlier post.
+--
|This was sent by qureshiu...@rediffmail.com via
Host OS : Solaris 9
NBU : 6.5.3
NO it gives that logical unit is in the process of getting ready
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com
We have fixed the problem by applying latest firmware and currently the library
is under observation. Last 48 hrs. there has been no downtime.
Thanks for all the advice.
+--
|This was sent by qureshiu...@rediffmail.com via
Hi Forum,
Is it possible to backup Win2K8 client through NBU 6.0 MP6 ??
I had faced a similar situation and was able to backup successfully.
The client which in installed on the server is 6.5 64 bits.
I am bit confused .. how this is possible
Desperately looking out for change in India/Mumbai.
If any one has an opporunity, then pls. respond.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
Hi Forum,
Is there any way through which we can find out the actual data restored size.
In normal condition it shows the bytes read and not written.
Pls. suggest.
+--
|This was sent by qureshiu...@rediffmail.com via Backup
Dear Forum,
Need to implement NOM. Existing setup is of 6.5.3 Master/Media Server on
Solaris. Setup has 4 Master / 6 Media servers.
Need your suggestion/steps involved to do so.
Thanks in Advance.
+--
|This was sent by
Dear Forum,
I need to upgrade my setup from 6.5.3 (Solaris 10) to 6.5.4.
Pls. help me out with the steps / precautions to be taken before/after the
upgradation.
Is 6.5.4 compatible to backup exchange without any license requirement.
Thanks In Advance
Hi Forum,
I need to download 6.5.5 version for upgradation.
Also clients.
Thanks in Advance
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
Hi Forum,
My env is Master/Media - 6.5.3 (Solaris 10)
Client - 6.5.3 (Win 2008 Ent 64bit.)
Job is failing with error 11. It is not connecting.
I am able to ping smootly from Master --Client, Client---Master.
telnet from Master on 13782 port is also successful.
Any suggestions pls.
Hi Forum,
My backup environment has 6.5.3 Master --- controls robot.
2 Media Server 6.5.3 controls drives.
Tape Library is SL500 with 16 Drives, 8 on each media server.
Now the problem is 1 of the media server is showing all 8 drives on OS level
when check through sgscan etc. But when i
Hi Justin,
Robot is controlled by MASTER Server.
---
Hi Simon,
When i use tpconfig i see robot -- robot host there.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to
Hi Forum,
I have upgraded my developement setup which was on 6.5.3 to 6.5.5 Master -
Solaris 9.
But when i am checking Hardware OS under policy i don't get Win 2008 R2
option any where.
Also what other functions of 6.5.5 i can verify.
Thanks in Advance.
How about taking a system state backup of Win2008 R2 server.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
Hi forum,
For MS Exchange client do we require seperate license under 6.5.5 or it
supports.
Where can i get the Product Code for netbackup clients / applications etc.
+--
|This was sent by qureshiu...@rediffmail.com via
Hi Forum,
We have upgraded our setup with 6.5.5. But facing certain issues like under
hardware type in Policy-Client, i am unable to get Linux etc clients. Only PC,
Solaris and Novel hardware are visible.
What can be the problem here???
Also when i query the client through HOST
But do i have to install even the solaris clients also.
I am using the tar files for applying the 6.5.5 patch.
Any other procedure pls.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to
Hi Forum,
As we have the update client command for Solaris, how can we upgrade the
windows client also with one command.
If my master server is of solaris can it be done from there also ???
Any process / procedure.
+--
Hi Forum,
How can we find the number of times a media is mounted/used for backup since
its injection to the tape library.
What is the best way to find out how many medias will be used over a period of
time thereby helping us to fix the budget.
Thanks in Advance
Dear Forum,
I am trying to backup specific files from a Windows Client but when the backup
starts some other file is getting backed up.
Ex: E:\Data\Mail\nnm.nsf E:\Data\Mail\nnp.nsf
But when backup starts it shows E:\Data\Mail\ppp.nsf
I tried checking for excludes but nothing is set on the
Sorry... forgot to mention the NBU version its 6.5.5 on Master/Media.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com
Hi McColl,
But the backup of required files have not taken place.
bplist will let me know the files which have been backed up.
Also what i am observing that i am not able to save any changes in any policy
and getting error 238 --- database incosistency error.
Any ideas / suggestions as to
This is what i get in bpdbm logs.
-
18:53:03.099 [1867] 2 image_db: Q_IMAGE_ADD_FILES (locking)
18:53:03.100 [1867] 2 db_get_image_info: Job in progress, found image file
Hi Forum,
Any changes to the policy not get reflected. I am on 6.5.5 (Solaris).
But if i create a new policy with same details, it is happening without any
problem.
Any suggestions/ideas appreciated.
Thanks
+--
|This was
No it has been observed in 3-4 policies.
Yes we are refreshing the java console after making changes.
But the error which i get is in Netbackup Admin Console.
+--
|This was sent by qureshiu...@rediffmail.com via Backup
Yeah even i am experienceing the same performance problem in 6.5.5, even java
console, Netbackup Admin console etc. are working very slow.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to
Hi Forum,
My setup has Solaris 10 MASTER/Media on 6.5.5.
When an auto schedule of BC Tape backup runs few/all streams of the backup
complete by giving 32 KB. BCV devices are made visible to Media server and
backup is taken.
If we refire the same then it goes well. any clue as to why this
Pls. find the backup selection of the policy.
NEW_STREAM
/BCV/DSSODS/dssodsdata/admin
/BCV/DSSODS/dssodsdata/ods1
/BCV/DSSODS/dssodsdata/ods2
/BCV/DSSODS/dssodsdata/ods3
/BCV/DSSODS/dssodsdata/ods4
/BCV/DSSODS/dssodsdata2/ods13
Dear Forum,
Frequently getting error 50 for all active backups.
NBU 6.5.5-- any suggestions pls.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com
Hi,
Client OS are Win2008/2003/Solaris 9/10 etc
Master is on Solaris 10
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
Dear Team,
Setup is MASTER 6.0 on Solaris 9.
Not able to get Device Monitor through GUI showing error not able to
connect to VMD
Not able to execute any VM related commands like tpconfig / robtest
Can anyone help-- its urgent.
where i have to check this on my master or media.
Robot is configured on master and tape drives on media.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
Hi Forum,
My env. has 1 Master on Sol 10 with 6.5.5 and 4 media server with 24 drives. I
am adding 2 more to one of my media server. I am getting the following output
from tpconfig.
r...@p100xmed04 # /opt/openv/volmgr/bin/tpconfig -l
Device Robot Drive Robot Drive Device Second
Type Num Index
Hi David,
Where exactly this has to be set. On backup servers (MASTER/MEDIA) or the
client end.
I went through HOST Properties Client Exchange_CLient
Properties Windows Client VSP
BUT I AM USING VSS.
Dear Forum,
I need to know whether we can install netbackup client software through
Administration Console on Window/Solaris/Linux clients.
Thanks in Advance.
+--
|This was sent by qureshiu...@rediffmail.com via Backup
Hi Judy,
Some more idea on System Center...???
Like how we install for Solar/Linux server through install_client_files
Is there some thing like that for Windows too or other way.
+--
|This was sent by
Hi,
Even i need it pls. .qureshiu...@rediffmail.com
thanks
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
Dear Forum,
My setup is 6.5.5 on Solaris 10.
When i run sgscan tape it gives few output and then goes in hang state not
giving any output.
r...@p203xmed03 # /opt/openv/volmgr/bin/sgscan tape
#
#WARNING: detected
You need to get open following ports
13720
13724
13782
13783
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
Hi Forum,
Need to upgrade my setup which is on NBU 6.5.5 (Solaris) to NBU 7.0
Pls. inform/suggest the steps involved to do so.
Thanks in Advance
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward
Hi,
Can u share the procedure for upgrading netbackup from 6.5 to 7.0
Thanks in Advance
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
Hi,
I am also getting the same issue. Tried what all u have done. Now escalated to
Symantec, but no proper solution yet.
+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to
Dear Forum,
I m facing frequent problem of error 89. Some of the streams of BC based
backups and nw backup fails. But after re-firing it, it goes through.
This is on Solaris 10 media server with 6.5.5.
Any solution/suggestions are welcome in this regard.
Thanking U In Advance.
Dear Forum,
I have 2 similar hardware servers with Solaris 10 and NBU is 6.5.5.
Both the servers have physical Ip configured on it.
Ex. 10.66.12.12 10.66.12.10
My VIP is 10.66.12.11, but when i configure the VIP on the virtual interface
say ce0:1 and start netbackup, the media servers shows
r...@p038xmst01 # nbemmcmd -listhosts -verbose
NBEMMCMD, Version:6.5.5
The following hosts were found:
P038XMST01
MachineName = P038XMST01
MachineDescription =
MachineNbuType = server (6)
P038XMST01
ClusterName =
MachineName = P038XMST01
1 - 100 of 123 matches
Mail list logo