[Veritas-bu] Temporarily downing a robot/library

2012-12-13 Thread Whelan, Patrick
Does anyone know of a way to temporarily stop using a robot/library. There are 
several connect to the media server and we want the others to continue. Is 
there a way, short of downing all the drives, to accomplish this?

Patrick Whelan
Senior NetBackup Specialist
+44 (0)207 995 9715

--
This message, and any attachments, is for the intended recipient(s) only, may 
contain information that is privileged, confidential and/or proprietary and 
subject to important terms and conditions available at 
http://www.bankofamerica.com/emaildisclaimer.   If you are not the intended 
recipient, please delete this message.
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] db/images question

2012-10-18 Thread Whelan, Patrick
If all the images for a client have expired and the client has been deleted, 
does NetBackup automagically delete its corresponding directory in 
/usr/openv/netbackup/db/images ?

Regards,

Patrick Whelan
Senior NetBackup Specialist
+44 (0)207 995 9715

--
This message w/attachments (message) is intended solely for the use of the 
intended recipient(s) and may contain information that is privileged, 
confidential or proprietary. If you are not an intended recipient, please 
notify the sender, and then please delete and destroy all copies and 
attachments, and be advised that any review or dissemination of, or the taking 
of any action in reliance on, the information contained in or attached to this 
message is prohibited. 
Unless specifically indicated, this message is not an offer to sell or a 
solicitation of any investment products or other financial product or service, 
an official confirmation of any transaction, or an official statement of 
Sender. Subject to applicable law, Sender may intercept, monitor, review and 
retain e-communications (EC) traveling through its networks/systems and may 
produce any such EC to regulators, law enforcement, in litigation and as 
required by law. 
The laws of the country of each sender/recipient may impact the handling of EC, 
and EC may be archived, supervised and produced in countries other than the 
country in which you are located. This message cannot be guaranteed to be 
secure or free of errors or viruses. 

References to Sender are references to any subsidiary of Bank of America 
Corporation. Securities and Insurance Products: * Are Not FDIC Insured * Are 
Not Bank Guaranteed * May Lose Value * Are Not a Bank Deposit * Are Not a 
Condition to Any Banking Service or Activity * Are Not Insured by Any Federal 
Government Agency. Attachments that are part of this EC may have additional 
important disclosures and disclaimers, which you should read. This message is 
subject to terms available at the following link: 
http://www.bankofamerica.com/emaildisclaimer. By messaging with Sender you 
consent to the foregoing.
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] Incremental backup question

2012-10-16 Thread Whelan, Patrick
Hi All,

I suppose the answer is obvious, but I'm having trouble getting my head around 
it.
What happens to an incremental backup whose dependent full has expired.
For example
A full backup is run and expires in 90 days. 89 Days later an cumulative 
incremental is run and expires in 30 days. Two days later the Full expires. Is 
the incremental still useful? If so, to what extent.

Regards,

Patrick Whelan
Senior NetBackup Specialist
+44 (0)207 995 9715

--
This message w/attachments (message) is intended solely for the use of the 
intended recipient(s) and may contain information that is privileged, 
confidential or proprietary. If you are not an intended recipient, please 
notify the sender, and then please delete and destroy all copies and 
attachments, and be advised that any review or dissemination of, or the taking 
of any action in reliance on, the information contained in or attached to this 
message is prohibited. 
Unless specifically indicated, this message is not an offer to sell or a 
solicitation of any investment products or other financial product or service, 
an official confirmation of any transaction, or an official statement of 
Sender. Subject to applicable law, Sender may intercept, monitor, review and 
retain e-communications (EC) traveling through its networks/systems and may 
produce any such EC to regulators, law enforcement, in litigation and as 
required by law. 
The laws of the country of each sender/recipient may impact the handling of EC, 
and EC may be archived, supervised and produced in countries other than the 
country in which you are located. This message cannot be guaranteed to be 
secure or free of errors or viruses. 

References to Sender are references to any subsidiary of Bank of America 
Corporation. Securities and Insurance Products: * Are Not FDIC Insured * Are 
Not Bank Guaranteed * May Lose Value * Are Not a Bank Deposit * Are Not a 
Condition to Any Banking Service or Activity * Are Not Insured by Any Federal 
Government Agency. Attachments that are part of this EC may have additional 
important disclosures and disclaimers, which you should read. This message is 
subject to terms available at the following link: 
http://www.bankofamerica.com/emaildisclaimer. By messaging with Sender you 
consent to the foregoing.
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] Tuning nbrb

2012-09-06 Thread Whelan, Patrick
Hi All,

Does anyone have any experience / suggestions regarding the tuning of nbrb. It 
appears to be a real bottleneck here.

Regards,

Patrick Whelan
Senior NetBackup Specialist
+44 (0)207 995 9715

--
This message w/attachments (message) is intended solely for the use of the 
intended recipient(s) and may contain information that is privileged, 
confidential or proprietary. If you are not an intended recipient, please 
notify the sender, and then please delete and destroy all copies and 
attachments, and be advised that any review or dissemination of, or the taking 
of any action in reliance on, the information contained in or attached to this 
message is prohibited. 
Unless specifically indicated, this message is not an offer to sell or a 
solicitation of any investment products or other financial product or service, 
an official confirmation of any transaction, or an official statement of 
Sender. Subject to applicable law, Sender may intercept, monitor, review and 
retain e-communications (EC) traveling through its networks/systems and may 
produce any such EC to regulators, law enforcement, in litigation and as 
required by law. 
The laws of the country of each sender/recipient may impact the handling of EC, 
and EC may be archived, supervised and produced in countries other than the 
country in which you are located. This message cannot be guaranteed to be 
secure or free of errors or viruses. 

References to Sender are references to any subsidiary of Bank of America 
Corporation. Securities and Insurance Products: * Are Not FDIC Insured * Are 
Not Bank Guaranteed * May Lose Value * Are Not a Bank Deposit * Are Not a 
Condition to Any Banking Service or Activity * Are Not Insured by Any Federal 
Government Agency. Attachments that are part of this EC may have additional 
important disclosures and disclaimers, which you should read. This message is 
subject to terms available at the following link: 
http://www.bankofamerica.com/emaildisclaimer. By messaging with Sender you 
consent to the foregoing.
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] Another frequency based scheduling question.

2012-08-09 Thread Whelan, Patrick
Hi All,

You would think after 16 years I would know this answer, and I think I do, but 
I would like other opinions or facts.
Here is the quandary:
Backup window 1900 - 0600, frequency 1 day.
Backup runs at 0300 for various reasons, including manually run.
Question:
Will the next backup run the next day at 1900?, 0300? or not at all.
This is NBU 6.5.6.
If you think you need to know the OS, please explain why?

P.S.
I have read Marianne's  and Joseph's fine dissertations on Frequency based, but 
they do not, as far as I can see, address this question only if you have 
multiple schedules running on the same day, which I do understand.

Regards,

Patrick Whelan
Senior NetBackup Specialist
+44 (0)207 995 9715

--
This message w/attachments (message) is intended solely for the use of the 
intended recipient(s) and may contain information that is privileged, 
confidential or proprietary. If you are not an intended recipient, please 
notify the sender, and then please delete and destroy all copies and 
attachments, and be advised that any review or dissemination of, or the taking 
of any action in reliance on, the information contained in or attached to this 
message is prohibited. 
Unless specifically indicated, this message is not an offer to sell or a 
solicitation of any investment products or other financial product or service, 
an official confirmation of any transaction, or an official statement of 
Sender. Subject to applicable law, Sender may intercept, monitor, review and 
retain e-communications (EC) traveling through its networks/systems and may 
produce any such EC to regulators, law enforcement, in litigation and as 
required by law. 
The laws of the country of each sender/recipient may impact the handling of EC, 
and EC may be archived, supervised and produced in countries other than the 
country in which you are located. This message cannot be guaranteed to be 
secure or free of errors or viruses. 

References to Sender are references to any subsidiary of Bank of America 
Corporation. Securities and Insurance Products: * Are Not FDIC Insured * Are 
Not Bank Guaranteed * May Lose Value * Are Not a Bank Deposit * Are Not a 
Condition to Any Banking Service or Activity * Are Not Insured by Any Federal 
Government Agency. Attachments that are part of this EC may have additional 
important disclosures and disclaimers, which you should read. This message is 
subject to terms available at the following link: 
http://www.bankofamerica.com/emaildisclaimer. By messaging with Sender you 
consent to the foregoing.
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] There are no files matching the specified criteria

2012-07-25 Thread Whelan, Patrick
Have you tried the bplist command, such  as:
bplist –C client_name -R 99 –Listseconds –s 01/01/1970 /

bplist –help for more information.

I have also seen this problem when there were multiple names for the same 
client.

Regards,

Patrick Whelan
Senior NetBackup Specialist

From: veritas-bu-boun...@mailman.eng.auburn.edu 
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of 
ken_zuf...@goodyear.com
Sent: 25 July 2012 13:42
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] There are no files matching the specified criteria

Are you sure the images haven't expired?

Also, since this is a Unix search, make sure you've got a valid path in the 
Browse directory field.  This normally defaults to the home directory of the 
user opening the GUI...if that directory doesn't exist on the target machine, 
you'll get the error.

Ken Zufall
Operating Systems Administrator
D660C
The Goodyear Tire  Rubber Company
GTN 446.0592 or 330.796.0592




From:scott.geo...@parker.com
To:VERITAS-BU@mailman.eng.auburn.edu 
VERITAS-BU@mailman.eng.auburn.edu, 
veritas-bu-boun...@mailman.eng.auburn.edu 
veritas-bu-boun...@mailman.eng.auburn.edu
Date:07/25/2012 08:29 AM
Subject:Re: [Veritas-bu] There are no files matching the specified 
criteria
Sent by:veritas-bu-boun...@mailman.eng.auburn.edu




If you still have information about previous backups available, I would query 
the catalog for available images on the media used for the backup.  This will 
tell you right away what is on the tape.  You don't have anything in place that 
changes the copy number of images, do you?  Any vaulting occurring?

If you have done the backup recently, but don't have any images available for 
restore, the copy number may be another issue.



From:Grigore Petrisor edy2...@yahoo.com
To:scott.geo...@parker.com scott.geo...@parker.com, 
VERITAS-BU@mailman.eng.auburn.edu VERITAS-BU@mailman.eng.auburn.edu, 
veritas-bu-boun...@mailman.eng.auburn.edu 
veritas-bu-boun...@mailman.eng.auburn.edu
Date:07/25/2012 08:19 AM
Subject:Re: [Veritas-bu] There are no files matching the specified 
criteria




Hello Scott,

Thank you for your replay.

Issue is not caused by a policy type or a client selection ... I think there is 
a problem with catalog. I have google about  this issue but didn’t  find 
nothing clear.


From: scott.geo...@parker.com scott.geo...@parker.com
To: VERITAS-BU@mailman.eng.auburn.edu VERITAS-BU@mailman.eng.auburn.edu; 
veritas-bu-boun...@mailman.eng.auburn.edu
Sent: Wednesday, July 25, 2012 3:08 PM
Subject: Re: [Veritas-bu] There are no files matching the specified criteria

Make sure you are selecting the proper policy type, i.e. MS-Windows for 
Windows based systems or Standard for *NIX systems.





From:Grigore Petrisor edy2...@yahoo.com
To:VERITAS-BU@mailman.eng.auburn.edu 
VERITAS-BU@mailman.eng.auburn.edu
Date:07/25/2012 08:04 AM
Subject:[Veritas-bu] There are no files matching the specified criteria
Sent by:veritas-bu-boun...@mailman.eng.auburn.edu




Hello,

Can anyone help me with the following issue?

I have a Netbackup 6.5 installed on Solaris 10 and recently I ran into an issue 
when I try to restore files from a backup. In fact the NetBackup GUI 
immediately reported There are no files matching the specified criteria. 
Normally this would implicate my search criteria; perhaps I specified an 
incorrect policy type or media server. However, I repeatedly got the same error 
even when all I changed was the ending search date (specifying an earlier 
backup).
All backups are succesfully completed.

Any help will be appreciated.___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

PLEASE NOTE: The preceding information may be confidential or privileged. It 
only should be used or disseminated for the purpose of conducting business with 
Parker. If you are not an intended recipient, please notify the sender by 
replying to this message and then delete the information from your system. 
Thank you for your cooperation.

___
Veritas-bu maillist  -  
Veritas-bu@mailman.eng.auburn.edumailto:Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


PLEASE NOTE: The preceding information may be confidential or privileged. It 
only should be used or disseminated for the purpose of conducting business with 
Parker. If you are not an intended recipient, please notify the sender by 
replying to this message and then delete the information from your system. 
Thank you for your cooperation. ___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu

[Veritas-bu] Exclude System State and/or Shadow Copy Components

2012-05-25 Thread Whelan, Patrick
Hello All,

How can I exclude the above mention from a backup.
I have tried:
System State:\
System_State:\
/System Stage/
Shadow Copy Components:\
Shadow Copy Components
/Shadow Copy Components/

None of them appear to work, which leads me to one more question, how can I 
tell if it is excluding them?
When I watch the activity monitor for the multi streamed job that says Shadow 
Copy is say 1 file and x KB, so I assume it is not excluding it.

Regards,

Patrick Whelan
Senior NetBackup Specialist
Whelan Consulting Ltd.

--
This message w/attachments (message) is intended solely for the use of the 
intended recipient(s) and may contain information that is privileged, 
confidential or proprietary. If you are not an intended recipient, please 
notify the sender, and then please delete and destroy all copies and 
attachments, and be advised that any review or dissemination of, or the taking 
of any action in reliance on, the information contained in or attached to this 
message is prohibited. 
Unless specifically indicated, this message is not an offer to sell or a 
solicitation of any investment products or other financial product or service, 
an official confirmation of any transaction, or an official statement of 
Sender. Subject to applicable law, Sender may intercept, monitor, review and 
retain e-communications (EC) traveling through its networks/systems and may 
produce any such EC to regulators, law enforcement, in litigation and as 
required by law. 
The laws of the country of each sender/recipient may impact the handling of EC, 
and EC may be archived, supervised and produced in countries other than the 
country in which you are located. This message cannot be guaranteed to be 
secure or free of errors or viruses. 

References to Sender are references to any subsidiary of Bank of America 
Corporation. Securities and Insurance Products: * Are Not FDIC Insured * Are 
Not Bank Guaranteed * May Lose Value * Are Not a Bank Deposit * Are Not a 
Condition to Any Banking Service or Activity * Are Not Insured by Any Federal 
Government Agency. Attachments that are part of this EC may have additional 
important disclosures and disclaimers, which you should read. This message is 
subject to terms available at the following link: 
http://www.bankofamerica.com/emaildisclaimer. By messaging with Sender you 
consent to the foregoing.
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] migrating standalone master serverto clustered-master-server

2010-12-21 Thread Whelan, Patrick
If one or more of these conditions is not met please contact Symantec
Consulting Services or your Business Critical Account Manager for
assistance.

1.  The master server must not be clustered.  

 

 

Regards, 

Patrick Whelan 
NetBackup Specialist 
Wholesale Markets and Treasury  Trading 
Lloyds Banking Group 
Desk: +44 (0) 207 158 6123 
Loc: OBS 2C-132 
P please don't print this e-mail unless you really need to. 



From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of stefanos
Sent: 21 December 2010 13:19
To: 'Asiye Yigit'; veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] migrating standalone master serverto
clustered-master-server

 

Hello,

Yes you can do it, with the same OS type.  Not from windows to
unix/Linux and vice versa. 

http://www.symantec.com/docs/TECH77448

stefanos

 

 

 

From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Asiye
Yigit
Sent: Tuesday, December 21, 2010 1:59 PM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] migrating standalone master server to
clustered-master-server

 

 

Hello All;

Is it possible to recover existing netbackup catalog to

Newly installed clustered environment in solaris with VCS.

 

I mean suppose that we have refresh installation with new hardware
including OS and NB (with the same verison and the same

Patch level as the previous one).

And then, recover the existing catalog to the new clustered environment.

Virtual name will be the same as the previous netbackup master server
name.

Regards;

 

 

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.
Bank of Scotland plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 327000. Telephone: 0870 600 5000

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.
Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Lloyds TSB Bank plc, Lloyds TSB Scotland plc, Bank of Scotland plc and 
Cheltenham  Gloucester plc are authorised and regulated by the Financial 
Services Authority.
Halifax is a division of Bank of Scotland plc. Cheltenham  Gloucester Savings 
is a division of Lloyds TSB Bank plc.

HBOS plc. Registered Office: The Mound, Edinburgh EH1 1YZ. Registered in 
Scotland, number 218813. Telephone: 0870 600 5000

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555

This e-mail (including any attachments) is private and confidential and may 
contain privileged material. If you have received this e-mail in error, please 
notify the sender and delete it  (including any attachments) immediately. You 
must not copy, distribute, disclose or use any of the information in it or any 
attachments.

Telephone calls may be monitored or recorded.

__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] NetBackup 7.0 controlling/logging a ufsdump

2010-12-13 Thread Whelan, Patrick
You can use NetBackup to get a tape and put it in a drive (assuming you
have a library) using tpreq -m media_id [-a (r/w)] [-d density] [-p
poolname]  [-priority number] [-f] filename

Your script could then do a ufsdump and tpunmount [-e exitstatus] [-f]
filename [-force]  to unmount the tape. Be sure the tape is in a pool
that the backups don't use.

Regards, 

Patrick Whelan 
NetBackup Specialist 
Wholesale Markets and Treasury  Trading 
Lloyds Banking Group 
Desk: +44 (0) 207 158 6123 
Loc: OBS 2C-132 
P please don't print this e-mail unless you really need to. 



From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Jim
Caldwell
Sent: 13 December 2010 15:52
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] NetBackup 7.0 controlling/logging a ufsdump

 

Can NetBackup backup be used to do a ufsdump? If so what is the process
need to be used in the policy. Thanks.

 

James M. Caldwell
NCCCS Unix Support
Operation  Systems Analyst
caldwe...@nccommunitycolleges.edu
919-807-7234 (Office)
___
E-mail correspondence to and from this address may be subject
to the North Carolina Public Records Law and shall be disclosed
to third parties when required by the statutes. (NCGS.Ch.132)
___

 

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.
Bank of Scotland plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 327000. Telephone: 0870 600 5000

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.
Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Lloyds TSB Bank plc, Lloyds TSB Scotland plc, Bank of Scotland plc and 
Cheltenham  Gloucester plc are authorised and regulated by the Financial 
Services Authority.
Halifax is a division of Bank of Scotland plc. Cheltenham  Gloucester Savings 
is a division of Lloyds TSB Bank plc.

HBOS plc. Registered Office: The Mound, Edinburgh EH1 1YZ. Registered in 
Scotland, number 218813. Telephone: 0870 600 5000

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555

This e-mail (including any attachments) is private and confidential and may 
contain privileged material. If you have received this e-mail in error, please 
notify the sender and delete it  (including any attachments) immediately. You 
must not copy, distribute, disclose or use any of the information in it or any 
attachments.

Telephone calls may be monitored or recorded.

__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Netbackup 6.5.5 Backup Selections Paths Report

2010-10-18 Thread Whelan, Patrick
The information is in:

bperror -all -l

or

bpdbjobs -all_columns

 

bperror is the more accurate because bpdbjobs only covers jobs that you
can see in the activity monitor.

 

Good luck.

 

Regards, 

Patrick Whelan 
NetBackup Specialist 
Wholesale Markets and Treasury  Trading 
Lloyds Banking Group 
Desk: +44 (0) 207 158 6123 
Loc: OBS 2C-132 
P please don't print this e-mail unless you really need to. 



From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Jimenez,
Daniel
Sent: 18 October 2010 18:44
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Netbackup 6.5.5 Backup Selections Paths Report

 

Hey guys

 

I am attempting to pull a daily report from the standard reporting tools
or bpdbjobs that will give me the client, backup selections paths and
bytes but I can't seem to find an easy way to pull this off, any ideas?
I want to be sure that we are backing up all the right paths so by
running this report, we could quickly find out if there are any troubled
systems in the environment. Any help would be appreciated. 

 

Daniel Jimenez
System IT Analyst IV

 

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.
Bank of Scotland plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 327000. Telephone: 0870 600 5000

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.
Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Lloyds TSB Bank plc, Lloyds TSB Scotland plc, Bank of Scotland plc and 
Cheltenham  Gloucester plc are authorised and regulated by the Financial 
Services Authority.
Halifax is a division of Bank of Scotland plc. Cheltenham  Gloucester Savings 
is a division of Lloyds TSB Bank plc.

HBOS plc. Registered Office: The Mound, Edinburgh EH1 1YZ. Registered in 
Scotland, number 218813. Telephone: 0870 600 5000

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555

This e-mail (including any attachments) is private and confidential and may 
contain privileged material. If you have received this e-mail in error, please 
notify the sender and delete it  (including any attachments) immediately. You 
must not copy, distribute, disclose or use any of the information in it or any 
attachments.

Telephone calls may be monitored or recorded.

__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Any body have script to accomplish following ?

2010-08-20 Thread Whelan, Patrick
 
Someone published a ksh version a few weeks ago. I have a Perl version
if you want.

Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123
Loc: OBS 2C-132
P please don't print this e-mail unless you really need to.


-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of
bolobaboo kabootar
Sent: 20 August 2010 14:57
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Any body have script to accomplish following ?

Hi
I have NBU 6.5 enviornment. I want report which lists client name and
total data as per policy type. Example ...which are excahnge client and
what is total data size , which are unix client and their data
size...etc ..Then at end give total size for entire enviornment.

Thank you.
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.
Bank of Scotland plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 327000. Telephone: 0870 600 5000

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.
Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Lloyds TSB Bank plc, Lloyds TSB Scotland plc, Bank of Scotland plc and 
Cheltenham  Gloucester plc are authorised and regulated by the Financial 
Services Authority.
Halifax is a division of Bank of Scotland plc. Cheltenham  Gloucester Savings 
is a division of Lloyds TSB Bank plc.

HBOS plc. Registered Office: The Mound, Edinburgh EH1 1YZ. Registered in 
Scotland, number 218813. Telephone: 0870 600 5000

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555

This e-mail (including any attachments) is private and confidential and may 
contain privileged material. If you have received this e-mail in error, please 
notify the sender and delete it  (including any attachments) immediately. You 
must not copy, distribute, disclose or use any of the information in it or any 
attachments.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
__
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] command to figure out size of all backups in agiven period

2010-07-30 Thread Whelan, Patrick
Thank you Harpreet.

For those who may want to use Perl so that it might work on Windows (not
tested) I am attaching a Perl version. 

If anyone gets it to work on Windows could you let me know, and what you
did to get it fixed, please.

Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123
Loc: OBS 2C-132
P please don't print this e-mail unless you really need to.


-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Harpreet
SINGH
Sent: 29 July 2010 00:56
To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU
Cc: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU;
veritas-bu-boun...@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] command to figure out size of all backups in
agiven period

Dear All,

Please find attached the requested script.

(See attached file: Net_Backup_Total_Report.sh)

With Warm Regards
=-=-=-=-=-=-=-=-=-=-=-=-=-
Harpreet Singh Chana

Phone  : (O) 6895 - 4326
Fax   : (O) 6895 - 4991
=-=-=-=-=-=-=-=-=-=-=-=-=-
Please do not print this email unless it is absolutely necessary.


Notice
The information in this message is confidential and may be legally
privileged.  It is intended solely for the addressee.  Access to this
message by anyone else is unauthorized.  If you are not the intended
recipient,  any disclosure,  copying or distribution of the message,  or
any action taken by you in reliance on it,  is prohibited and may be
unlawful.  If you have received this message in error,  please delete it
and contact the sender immediately.  Thank you.




 

 NBU

 netbackup-forum@

 backupcentral.com
To 
  VERITAS-BU@MAILMAN.ENG.AUBURN.EDU

 Sent by:
cc 
 veritas-bu-bounce

 s...@mailman.eng.aub
Subject 
 urn.edu   [Veritas-bu] command to figure
out  
   size of all backups in a given   
   period

 07/28/2010 07:33

 PM

 

 

 

 Please respond to

 veritas...@mailma

 N.ENG.AUBURN.EDU

 

 






Hi Harpreet,

Can we have the script pasted here.

+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

ForwardSourceID:NT0016612A
Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.
Bank of Scotland plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 327000. Telephone: 0870 600 5000

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.
Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Lloyds TSB Bank plc, Lloyds TSB Scotland plc, Bank of Scotland plc and 
Cheltenham  Gloucester plc are authorised and regulated by the Financial 
Services Authority.
Halifax is a division of Bank of Scotland plc. Cheltenham  Gloucester Savings 
is a division of Lloyds TSB Bank plc.

HBOS plc. Registered Office: The Mound, Edinburgh EH1 1YZ. Registered in 
Scotland, number 218813. Telephone: 0870 600 5000

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555

This e-mail (including any attachments) is private and confidential and may 
contain privileged material. If you have received this e-mail in error, please 
notify the sender and delete it  (including any attachments) immediately. You 
must not copy, distribute, disclose or use any of the information in it or any 
attachments.

Telephone calls may be monitored or recorded.

__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
__

Net_Backup_Total_Report.pl
Description: Net_Backup_Total_Report.pl
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] command to figure out size of all backups inagiven period

2010-07-30 Thread Whelan, Patrick
I don't know if anyone saw/got the first post with the Perl script, but
there were two minor bugs which are fixed with this attachment. 


Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123
Loc: OBS 2C-132
P please don't print this e-mail unless you really need to.


-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Whelan,
Patrick
Sent: 30 July 2010 13:17
To: Harpreet SINGH; VERITAS-BU@MAILMAN.ENG.AUBURN.EDU
Subject: Re: [Veritas-bu] command to figure out size of all backups
inagiven period

Thank you Harpreet.

For those who may want to use Perl so that it might work on Windows (not
tested) I am attaching a Perl version. 

If anyone gets it to work on Windows could you let me know, and what you
did to get it fixed, please.

Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading Lloyds Banking Group
Desk: +44 (0) 207 158 6123
Loc: OBS 2C-132
P please don't print this e-mail unless you really need to.


-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Harpreet
SINGH
Sent: 29 July 2010 00:56
To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU
Cc: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU;
veritas-bu-boun...@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] command to figure out size of all backups in
agiven period

Dear All,

Please find attached the requested script.

(See attached file: Net_Backup_Total_Report.sh)

With Warm Regards
=-=-=-=-=-=-=-=-=-=-=-=-=-
Harpreet Singh Chana

Phone  : (O) 6895 - 4326
Fax   : (O) 6895 - 4991
=-=-=-=-=-=-=-=-=-=-=-=-=-
Please do not print this email unless it is absolutely necessary.


Notice
The information in this message is confidential and may be legally
privileged.  It is intended solely for the addressee.  Access to this
message by anyone else is unauthorized.  If you are not the intended
recipient,  any disclosure,  copying or distribution of the message,  or
any action taken by you in reliance on it,  is prohibited and may be
unlawful.  If you have received this message in error,  please delete it
and contact the sender immediately.  Thank you.




 

 NBU

 netbackup-forum@

 backupcentral.com
To 
  VERITAS-BU@MAILMAN.ENG.AUBURN.EDU

 Sent by:
cc 
 veritas-bu-bounce

 s...@mailman.eng.aub
Subject 
 urn.edu   [Veritas-bu] command to figure
out  
   size of all backups in a given   
   period

 07/28/2010 07:33

 PM

 

 

 

 Please respond to

 veritas...@mailma

 N.ENG.AUBURN.EDU

 

 






Hi Harpreet,

Can we have the script pasted here.

+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

ForwardSourceID:NT0016612A
Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V
7HN. Registered in England and Wales, number 2065. Telephone: 020 7626
1500.
Bank of Scotland plc. Registered Office: The Mound, Edinburgh EH1 1YZ.
Registered in Scotland, number 327000. Telephone: 0870 600 5000

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120
George Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237.
Telephone: 0131 225 4555.
Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester
GL4 3RL. Registered in England and Wales, number 2299428. Telephone:
01452 372372.

Lloyds TSB Bank plc, Lloyds TSB Scotland plc, Bank of Scotland plc and
Cheltenham  Gloucester plc are authorised and regulated by the
Financial Services Authority.
Halifax is a division of Bank of Scotland plc. Cheltenham  Gloucester
Savings is a division of Lloyds TSB Bank plc.

HBOS plc. Registered Office: The Mound, Edinburgh EH1 1YZ. Registered in
Scotland, number 218813. Telephone: 0870 600 5000

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1
1YZ. Registered in Scotland, number 95000. Telephone: 0131 225 4555

This e-mail (including any attachments) is private and confidential and
may contain privileged material. If you have received this e-mail in
error, please notify the sender and delete it  (including any
attachments) immediately. You must not copy, distribute, disclose or use
any of the information in it or any attachments.

Telephone calls may be monitored or recorded

[Veritas-bu] Aptare Question

2010-07-20 Thread Whelan, Patrick
Sorry for the interruption. I know this is not an Aptare mailing list, but I 
don't what is, and I just installed Aptare and had a question or two. If anyone 
is willing to help off list please let me know.

You man now resume your regularly schedule mailing list.

Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123
Loc: OBS 2C-132
P please don't print this e-mail unless you really need to.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.
Bank of Scotland plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 327000. Telephone: 0870 600 5000

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.
Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Lloyds TSB Bank plc, Lloyds TSB Scotland plc, Bank of Scotland plc and 
Cheltenham  Gloucester plc are authorised and regulated by the Financial 
Services Authority.
Halifax is a division of Bank of Scotland plc. Cheltenham  Gloucester Savings 
is a division of Lloyds TSB Bank plc.

HBOS plc. Registered Office: The Mound, Edinburgh EH1 1YZ. Registered in 
Scotland, number 218813. Telephone: 0870 600 5000

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555

This e-mail (including any attachments) is private and confidential and may 
contain privileged material. If you have received this e-mail in error, please 
notify the sender and delete it  (including any attachments) immediately. You 
must not copy, distribute, disclose or use any of the information in it or any 
attachments.

Telephone calls may be monitored or recorded.

__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] bpduplicate

2010-06-22 Thread Whelan, Patrick
Hi All, 

A couple of irrelevant questions. Does anyone know what the -fork option is? Is 
the -X used to set the dates to Unix time format?

I am only the one that just discovered how to see what commands jnbSA executes? 
:(
Does anyone know how to do the equivalent from windows?

Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123
Loc: OBS 2C-132
P please don't print this e-mail unless you really need to.



Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Bank of Scotland plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 327000. Telephone: 0870 600 5000

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Lloyds TSB Bank plc, Lloyds TSB Scotland plc, Bank of Scotland plc and 
Cheltenham  Gloucester plc are authorised and regulated by the Financial 
Services Authority. 

Halifax is a division of Bank of Scotland plc. Cheltenham  Gloucester Savings 
is a division of Lloyds TSB Bank plc.

HBOS plc. Registered Office: The Mound, Edinburgh EH1 1YZ. Registered in 
Scotland, number 218813. Telephone: 0870 600 5000

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555

This e-mail (including any attachments) is private and confidential and may 
contain privileged material. If you have received this e-mail in error, please 
notify the sender and delete it  (including any attachments) immediately. You 
must not copy, distribute, disclose or use any of the information in it or any 
attachments.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] bpduplicate

2010-06-22 Thread Whelan, Patrick
I forgot. One more question. Why can I specify a storage unit group from
the command line or Catalog tree in the GUI, but not from the Vault
Management GUI?
 

Regards, 

Patrick Whelan 
NetBackup Specialist 
Wholesale Markets and Treasury  Trading 
Lloyds Banking Group 
Desk: +44 (0) 207 158 6123 
Loc: OBS 2C-132 
P please don't print this e-mail unless you really need to. 

 



From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Whelan,
Patrick
Sent: 22 June 2010 16:56
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: [Veritas-bu] bpduplicate



Hi All, 

A couple of irrelevant questions. Does anyone know what the -fork option
is? Is the -X used to set the dates to Unix time format?

I am only the one that just discovered how to see what commands jnbSA
executes? :( 
Does anyone know how to do the equivalent from windows? 

Regards, 

Patrick Whelan 
NetBackup Specialist 
Wholesale Markets and Treasury  Trading 
Lloyds Banking Group 
Desk: +44 (0) 207 158 6123 
Loc: OBS 2C-132 
P please don't print this e-mail unless you really need to. 



Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V
7HN. Registered in England and Wales, number 2065. Telephone: 020 7626
1500.

Bank of Scotland plc. Registered Office: The Mound, Edinburgh EH1 1YZ.
Registered in Scotland, number 327000. Telephone: 0870 600 5000

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120
George Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237.
Telephone: 0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester
GL4 3RL. Registered in England and Wales, number 2299428. Telephone:
01452 372372.

Lloyds TSB Bank plc, Lloyds TSB Scotland plc, Bank of Scotland plc and
Cheltenham  Gloucester plc are authorised and regulated by the
Financial Services Authority. 

Halifax is a division of Bank of Scotland plc. Cheltenham  Gloucester
Savings is a division of Lloyds TSB Bank plc.

HBOS plc. Registered Office: The Mound, Edinburgh EH1 1YZ. Registered in
Scotland, number 218813. Telephone: 0870 600 5000

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1
1YZ. Registered in Scotland, number 95000. Telephone: 0131 225 4555

This e-mail (including any attachments) is private and confidential and
may contain privileged material. If you have received this e-mail in
error, please notify the sender and delete it (including any
attachments) immediately. You must not copy, distribute, disclose or use
any of the information in it or any attachments.

Telephone calls may be monitored or recorded.

__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
__


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] WRN - can't lock raw device for read

2010-06-21 Thread Whelan, Patrick
Hi All,

I'm getting the above message while trying to do a raw partition back up of a 
W2k3 server. I turned off snap shot but it makes no difference. Does anyone 
have any suggestions?

Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123
Loc: OBS 2C-132
P please don't print this e-mail unless you really need to.



Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Bank of Scotland plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 327000. Telephone: 0870 600 5000

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Lloyds TSB Bank plc, Lloyds TSB Scotland plc, Bank of Scotland plc and 
Cheltenham  Gloucester plc are authorised and regulated by the Financial 
Services Authority. 

Halifax is a division of Bank of Scotland plc. Cheltenham  Gloucester Savings 
is a division of Lloyds TSB Bank plc.

HBOS plc. Registered Office: The Mound, Edinburgh EH1 1YZ. Registered in 
Scotland, number 218813. Telephone: 0870 600 5000

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555

This e-mail (including any attachments) is private and confidential and may 
contain privileged material. If you have received this e-mail in error, please 
notify the sender and delete it  (including any attachments) immediately. You 
must not copy, distribute, disclose or use any of the information in it or any 
attachments.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] Bpdbjobs jobtypes

2010-06-16 Thread Whelan, Patrick
Does anyone know what jobs types 15, 16, 17, 18, ... are?

I think 17 is image cleanup, but the others I have no clue.

Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123
Loc: OBS 2C-132
P please don't print this e-mail unless you really need to.



This e-mail is private and confidential and may contain privileged material. If 
you have received this e-mail in error, please notify the sender and delete it 
immediately. You must not copy, distribute, disclose or use any of the 
information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester plc 
are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Determining date of media freeze

2010-06-14 Thread Whelan, Patrick
bperror -l -media -X -d 169200 -e 127652 | grep -i freez
 
that the large number in the first column:
 
bpdbm -ctime large number 
 
and that will tell you the date.
 

Regards, 

Patrick Whelan 
NetBackup Specialist 
Wholesale Markets and Treasury  Trading 
Lloyds Banking Group 
Desk: +44 (0) 207 158 6123 
Loc: OBS 2C-132 
P please don't print this e-mail unless you really need to. 

 



From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of
michael.ket...@orange-ftgroup.com
Sent: 14 June 2010 14:50
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: [Veritas-bu] Determining date of media freeze


Does anyone happen to know if there's a way of determining the date
media was frozen?
 
Thanks
Mike

blocked::http://www.justgiving.com/CoastCakesCastles2010 

 

**

This e-mail (including any attachments) is intended for the above-named
person(s). It is confidential and may contain legally privileged
information. Any opinions expressed are not necessarily those of the
company. If you receive it in error please delete it, inform the sender
and do not copy, distribute or take any action in reliance upon it. 

We may monitor all incoming and outgoing emails in line with current
legislation. We have taken steps to ensure that this email and
attachments are free from any virus, but it remains your responsibility
to ensure that viruses do not adversely affect you. 

Orange Personal Communications Services Limited is an English company
(registered no. 2178917) with its address at St James Court, Great Park
Road, Almondsbury Park, Bradley Stoke, Bristol BS32 4QJ. 
Orange Retail Limited is an English company (registered no. 2439104)
with its address at St James Court, Great Park Road, Almondsbury Park,
Bradley Stoke, Bristol BS32 4QJ.
Orange Home UK Limited is an English company (registered no. 3014367)
with its address at St James Court, Great Park Road, Almondsbury Park,
Bradley Stoke, Bristol BS32 4QJ. 
.


**

*
This message and any attachments (the message) are confidential and
intended solely for the addressees. 
Any unauthorised use or dissemination is prohibited.
Messages are susceptible to alteration. 
France Telecom Group shall not be liable for the message if altered,
changed or falsified.
If you are not the intended addressee of this message, please cancel it
immediately and inform the sender.



This e-mail is private and confidential and may contain privileged material. If 
you have received this e-mail in error, please notify the sender and delete it 
immediately. You must not copy, distribute, disclose or use any of the 
information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester plc 
are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Netbackup Client Installation through AdministrationConsole

2010-04-26 Thread Whelan, Patrick
You can install UNIX/Linux clients from the Java GUI. But not windoze
clients. At least the option doesn't appear. If you click on Policies
-- Summary of All Policies -- Clients then right click on a client it
will show if you can install/upgrade of not.


Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123
Loc: OBS 2C-132

-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of NBU
Sent: 26 April 2010 11:53
To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU
Subject: [Veritas-bu] Netbackup Client Installation through
AdministrationConsole


Dear Forum,

I need to know whether we can install netbackup client software through
Administration Console on Window/Solaris/Linux clients.

Thanks in Advance.

+--
|This was sent by qureshiu...@rediffmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


This e-mail is private and confidential and may contain privileged material. If 
you have received this e-mail in error, please notify the sender and delete it 
immediately. You must not copy, distribute, disclose or use any of the 
information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester plc 
are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
__
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] NDMP Restores Slooooooooooooooow

2010-04-22 Thread Whelan, Patrick
Has anyone else seen this? When I say slow I mean 150 to 300 KB/Sec.

Windoze master
Netapps NDMP
NBU 6.5.3

Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123
Loc: OBS 2C-132



This e-mail is private and confidential and may contain privileged material. If 
you have received this e-mail in error, please notify the sender and delete it 
immediately. You must not copy, distribute, disclose or use any of the 
information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester plc 
are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] Another stupid question

2010-04-13 Thread Whelan, Patrick
Hello All,

How do I get the equivalent of the GUI  Media and Device Management -- Devices 
-- Media Servers from the command line?
At the moment my Admin Console says everything is good, but the Java Console 
says two are offline. I want to confirm this from the command line which is far 
more trustworthy.
I tried bpstulist with many different options.

Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123
Loc: OBS 2C-132



This e-mail is private and confidential and may contain privileged material. If 
you have received this e-mail in error, please notify the sender and delete it 
immediately. You must not copy, distribute, disclose or use any of the 
information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester plc 
are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Another stupid question

2010-04-13 Thread Whelan, Patrick
Never mind.
 
vmoprcmd -EMM. Java was correct.
 

Regards, 

Patrick Whelan 
NetBackup Specialist 
Wholesale Markets and Treasury  Trading 
Lloyds Banking Group 
Desk: +44 (0) 207 158 6123 
Loc: OBS 2C-132 

 



From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Whelan,
Patrick
Sent: 13 April 2010 10:42
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: [Veritas-bu] Another stupid question



Hello All, 

How do I get the equivalent of the GUI  Media and Device Management --
Devices -- Media Servers from the command line?

At the moment my Admin Console says everything is good, but the Java
Console says two are offline. I want to confirm this from the command
line which is far more trustworthy.

I tried bpstulist with many different options. 

Regards, 

Patrick Whelan 
NetBackup Specialist 
Wholesale Markets and Treasury  Trading 
Lloyds Banking Group 
Desk: +44 (0) 207 158 6123 
Loc: OBS 2C-132 



This e-mail is private and confidential and may contain privileged
material. If you have received this e-mail in error, please notify the
sender and delete it immediately. You must not copy, distribute,
disclose or use any of the information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1
1YZ. Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V
7HN. Registered in England and Wales, number 2065. Telephone: 020 7626
1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120
George Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237.
Telephone: 0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester
GL4 3RL. Registered in England and Wales, number 2299428. Telephone:
01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester
plc are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.

__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
__


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Cannot Write to Tape

2010-04-13 Thread Whelan, Patrick
 
What does the output of vmquery -list_media_genrule show?

Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123
Loc: OBS 2C-132

-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Justin
Piszcz
Sent: 13 April 2010 15:55
To: McDonald II, James F.
Cc: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Cannot Write to Tape

Hi,

Please include the list in the future.
It appears you need to limit your labels to 6 characters.
Check the volume manager manual, you need to edit vm.conf for NBU 6.x++
the labels for LTOX should be no more than 6 characters long, if your
barcode reader reads more than the first 6 characters, you need to limit
it.

BTW, is this a new environment?
Or did this just start happening?
If it just started happening, have you run an inventory and retried the
backup?

Justin.

On Tue, 13 Apr 2010, McDonald II, James F. wrote:

 Here is what I got when I ran the test:

 Opening {4,0,33,1}
 MODE_SENSE Complete
 Enter tld commands (? returns help information) s d drive 1 (addr 32) 
 access = 1 Contains Cartridge = Yes Barcode = 01L4 SCSI ID from 
 drive 1 is 0 READ_ELEMENT_STATUS Complete

 I tried double-checking the barcode result, by doing a robot
inventory.
 01L4 was not included in the inventory, but I'm almost positive 
 it's in there.


 -Original Message-
 From: Justin Piszcz [mailto:jpis...@lucidpixels.com]
 Sent: Tuesday, April 13, 2010 10:12 AM
 To: WEAVER, Simon (external)
 Cc: McDonald II, James F.; veritas-bu@mailman.eng.auburn.edu
 Subject: Re: [Veritas-bu] Cannot Write to Tape

 Hi,

 Reboot the master, run robtest and run s d does it show the drives
OK?

 Justin.

 On Tue, 13 Apr 2010, WEAVER, Simon (external) wrote:

 Have you rebooted the Master just in case?
 Anything changed to cause this problem?
 Have you enabled any logging?

 Simon

 

 From: veritas-bu-boun...@mailman.eng.auburn.edu
 [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of
 McDonald
 II, James F.
 Sent: Tuesday, April 13, 2010 1:43 PM
 To: veritas-bu@mailman.eng.auburn.edu
 Subject: [Veritas-bu] Cannot Write to Tape



 My backups write to disk without any problem, but when I try to run a

 Tape Backup I get one of three status codes: 200, 252 or 800.  I have

 researched all three and still have not been able to come up with a 
 solution.  I am running NBU 6.5 for Windows on a Dell 2950 with 
 Server
 2003 as the OS.  The tape drive is a Dell PV-124T.  Diagnostics run
 from
 the tapeloader all seem to pass and the inventories run from within
 NBU
 all seem to be correct, but I can't get anything to begin to write.



 Thanks,



 James McDonald

 System Administrator

 SAIC - IISBU

 410-312-2232

 mcdonal...@saic.com mailto:mcdonal...@saic.com




 This email (including any attachments) may contain confidential 
 and/or privileged information or information otherwise protected from

 disclosure. If you are not the intended recipient, please notify the 
 sender immediately, do not copy this message or any attachments and 
 do not use it for any purpose or disclose its content to any person, 
 but delete this message and any attachments from your system. Astrium

 disclaims any and all liability if this email transmission was virus 
 corrupted, altered or falsified.
 -o-
 Astrium Limited, Registered in England and Wales No. 2449259 
 Registered Office:
 Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


This e-mail is private and confidential and may contain privileged material. If 
you have received this e-mail in error, please notify the sender and delete it 
immediately. You must not copy, distribute, disclose or use any of the 
information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester plc 
are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.



Re: [Veritas-bu] open files to be backed up

2010-03-22 Thread Whelan, Patrick
It's not a matter of whether you can or can not backup an open file,
it's the type of open file that you are backing up. If it is a database
file and the database isn't aware that you are backing up its file the
file will not be in a state that the database can use if/when you
restore it. MOST database consist of more than one file so the current
file that is being backed up will be in one state whereas the next file
will be in a different state and so on. So that when the files are
restored they will all be in different positions and the database
won't know how to reconcile that difference. Database can be backed up
without agents but the database must be in control of the backup in
order to insure a stable environment for the restore. I hope this makes
sense.
 

Regards, 

Patrick Whelan 
NetBackup Specialist 
Wholesale Markets and Treasury  Trading 
Lloyds Banking Group 
Desk: +44 (0) 207 158 6123 
Loc: OBS 2C-132 

 



From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Martin,
Jonathan
Sent: 22 March 2010 14:04
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] open files to be backed up



Didn't Curtis' book include some information on backing up databases
without the database agent?

 

I was waiting for the plug. =P

 

-Jonathan

 

From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of SACHIN
ARORA
Sent: Saturday, March 20, 2010 11:01 AM
To: Justin Piszcz
Cc: VERITAS-BU@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] open files to be backed up

 

Thanks for replying...

 

 Hovewer, i'm kinda illetrate in this...can you elaborate you need a
connector to backup databases

 Can't these filed be backed up via open file file backup (VSS/VSP)

 

Regards

Sachin



 

On Sat, Mar 20, 2010 at 9:52 AM, Justin Piszcz jpis...@lucidpixels.com
wrote:

Hi,

MDF is a SQL Server Express DB file, you will have problems backing them
up if they keep changing when you back them up.  Usually you need a
connector to backup databases.

Justin. 



On Sat, 20 Mar 2010, SACHIN ARORA wrote:

Hi All,

I have a small issue here :


Backup of one of the server is getting partially successfull

Master : Solaris 10 , netbackup 6.5.4
Client : window 2003 , netbackup 6.5.4

Here the files that are not getting backed up :

03/19/2010 21:31:38 - Warning bpbrm (pid=14837) from client : WRN -
can't
open file: D:\Program Files\Microsoft SQL
Server\MSSQL\Data\Audit_DB_Data.MDF (WIN32 32: The process cannot access
the
file because it is being used by another process. )
03/19/2010 21:31:39 - Warning bpbrm (pid=14837) from client : WRN -
can't
open file: D:\Program Files\Microsoft SQL
Server\MSSQL\Data\Audit_DB_Log.LDF
(WIN32 32: The process cannot access the file because it is being used
by
another process. )
03/19/2010 21:31:40 - Warning bpbrm (pid=14837) from client : WRN -
can't
open file: D:\Program Files\Microsoft SQL
Server\MSSQL\Data\crnmr4_Data.MDF
(WIN32 32: The process cannot access the file because it is being used
by
another process. )
03/19/2010 21:31:41 - Warning bpbrm (pid=14837) from client : WRN -
can't
open file: D:\Program Files\Microsoft SQL
Server\MSSQL\Data\crnmr4_Log.LDF
(WIN32 32: The process cannot access the file because it is being used
by
another process. )
03/19/2010 21:31:41 - Warning bpbrm (pid=14837) from client : WRN -
can't
open file: D:\Program Files\Microsoft SQL Server\MSSQL\Data\master.mdf
(WIN32 32: The process cannot access the file because it is being used
by
another process. )
03/19/2010 21:31:42 - Warning bpbrm (pid=14837) from client : WRN -
can't
open file: D:\Program Files\Microsoft SQL Server\MSSQL\Data\mastlog.ldf
(WIN32 32: The process cannot access the file because it is being used
by
another process. )
03/19/2010 21:31:43 - Warning bpbrm (pid=14837) from client : WRN -
can't
open file: D:\Program Files\Microsoft SQL Server\MSSQL\Data\model.mdf
(WIN32
32: The process cannot access the file because it is being used by
another
process. )
03/19/2010 21:31:44 - Warning bpbrm (pid=14837) from client : WRN -
can't
open file: D:\Program Files\Microsoft SQL Server\MSSQL\Data\modellog.ldf
(WIN32 32: The process cannot access the file because it is being used
by
another process. )
03/19/2010 21:31:45 - Warning bpbrm (pid=14837) from client : WRN -
can't
open file: D:\Program Files\Microsoft SQL Server\MSSQL\Data\msdbdata.mdf
(WIN32 32: The process cannot access the file because it is being used
by
another process. )
03/19/2010 21:31:46 - Warning bpbrm (pid=14837) from client : WRN -
can't
open file: D:\Program Files\Microsoft SQL Server\MSSQL\Data\msdblog.ldf
(WIN32 32: The process cannot access the file because it is being used
by
another process. )
03/19/2010 21:59:29 - end writing; write time: 0:58:17
the requested operation was partially successful (1)

I want these files to be backed up. I tried
Disabled Open file backup and 

Re: [Veritas-bu] open files to be backed up

2010-03-22 Thread Whelan, Patrick
The keyword in your statement is down. You can backup any database
that is down, their just regular files. It's while the database is
running that the problem arises.
 

Regards, 

Patrick Whelan 
NetBackup Specialist 
Wholesale Markets and Treasury  Trading 
Lloyds Banking Group 
Desk: +44 (0) 207 158 6123 
Loc: OBS 2C-132 

 



From: Lightner, Jeff [mailto:jlight...@water.com] 
Sent: 22 March 2010 14:37
To: Whelan, Patrick; VERITAS-BU@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] open files to be backed up



I don't know how it works on Windows since we use the SQL agents but on
UNIX/Linux you can backup database files from the filesystem so long as
the database is down at the time you do it.  You can then restore from
that backup to the same filesystems or to an alternate server and/or
filesystems.



From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Whelan,
Patrick
Sent: Monday, March 22, 2010 10:10 AM
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] open files to be backed up

It's not a matter of whether you can or can not backup an open file,
it's the type of open file that you are backing up. If it is a database
file and the database isn't aware that you are backing up its file the
file will not be in a state that the database can use if/when you
restore it. MOST database consist of more than one file so the current
file that is being backed up will be in one state whereas the next file
will be in a different state and so on. So that when the files are
restored they will all be in different positions and the database
won't know how to reconcile that difference. Database can be backed up
without agents but the database must be in control of the backup in
order to insure a stable environment for the restore. I hope this makes
sense.

Regards, 

Patrick Whelan 
NetBackup Specialist 
Wholesale Markets and Treasury  Trading 
Lloyds Banking Group 
Desk: +44 (0) 207 158 6123 
Loc: OBS 2C-132 



From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Martin,
Jonathan
Sent: 22 March 2010 14:04
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] open files to be backed up

Didn't Curtis' book include some information on backing up databases
without the database agent?

I was waiting for the plug. =P

-Jonathan

From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of SACHIN
ARORA
Sent: Saturday, March 20, 2010 11:01 AM
To: Justin Piszcz
Cc: VERITAS-BU@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] open files to be backed up

Thanks for replying...

 Hovewer, i'm kinda illetrate in this...can you elaborate you need a
connector to backup databases

 Can't these filed be backed up via open file file backup (VSS/VSP)

Regards

Sachin



 

On Sat, Mar 20, 2010 at 9:52 AM, Justin Piszcz jpis...@lucidpixels.com
wrote:

Hi,

MDF is a SQL Server Express DB file, you will have problems backing them
up if they keep changing when you back them up.  Usually you need a
connector to backup databases.

Justin. 



On Sat, 20 Mar 2010, SACHIN ARORA wrote:

Hi All,

I have a small issue here :


Backup of one of the server is getting partially successfull

Master : Solaris 10 , netbackup 6.5.4
Client : window 2003 , netbackup 6.5.4

Here the files that are not getting backed up :

03/19/2010 21:31:38 - Warning bpbrm (pid=14837) from client : WRN -
can't
open file: D:\Program Files\Microsoft SQL
Server\MSSQL\Data\Audit_DB_Data.MDF (WIN32 32: The process cannot access
the
file because it is being used by another process. )
03/19/2010 21:31:39 - Warning bpbrm (pid=14837) from client : WRN -
can't
open file: D:\Program Files\Microsoft SQL
Server\MSSQL\Data\Audit_DB_Log.LDF
(WIN32 32: The process cannot access the file because it is being used
by
another process. )
03/19/2010 21:31:40 - Warning bpbrm (pid=14837) from client : WRN -
can't
open file: D:\Program Files\Microsoft SQL
Server\MSSQL\Data\crnmr4_Data.MDF
(WIN32 32: The process cannot access the file because it is being used
by
another process. )
03/19/2010 21:31:41 - Warning bpbrm (pid=14837) from client : WRN -
can't
open file: D:\Program Files\Microsoft SQL
Server\MSSQL\Data\crnmr4_Log.LDF
(WIN32 32: The process cannot access the file because it is being used
by
another process. )
03/19/2010 21:31:41 - Warning bpbrm (pid=14837) from client : WRN -
can't
open file: D:\Program Files\Microsoft SQL Server\MSSQL\Data\master.mdf
(WIN32 32: The process cannot access the file because it is being used
by
another process. )
03/19/2010 21:31:42 - Warning bpbrm (pid=14837) from client : WRN -
can't
open file: D:\Program Files\Microsoft SQL Server\MSSQL\Data\mastlog.ldf
(WIN32 32: The process cannot access the file because it is being used
by
another process. )
03/19/2010 21:31:43

Re: [Veritas-bu] Netbackup Drive

2010-03-11 Thread Whelan, Patrick
Give all four drives to NetBackup, then use tpreq to request a tape for
your tar, cpio or whatever. 


Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123
Loc: OBS 2C-132

-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of
naymyotun
Sent: 11 March 2010 14:49
To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU
Subject: [Veritas-bu] Netbackup Drive


Hi,
  Could you please help to find out for me if it is possible for
Netbackup and Tape Library:

  If Master server manages 4 tape drive from the Tape Library,
can we set it in such a way that 2 tape drives will be used for backups
run using Netbackup while another 2 tape drives are used for the tar
command triggered from OS level? Can you also check if to trigger tar
command from OS level, can I use any user account, besides Administrator
 root account to handle it?

+--
|This was sent by naymyo...@gmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


This e-mail is private and confidential and may contain privileged material. If 
you have received this e-mail in error, please notify the sender and delete it 
immediately. You must not copy, distribute, disclose or use any of the 
information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester plc 
are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
__
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] NDMP Restores

2010-03-01 Thread Whelan, Patrick
Hi All,

Environment:
Master and media servers Windoze 2003. NDMP filers Netapps (sorry don't know 
model or ontap version).

Scenario:
Backups from A can be restored to B but not A
Backups from B can be restored to B.
Backups from B to A may have worked but I don't remember as it was awhile ago. 
I do know that all restore scenarios for B worked.
Ontap for A is newer than B, but I don't have the version numbers. :(

Has anyone seen a similar problem?

Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123
Loc: OBS 2C-132



This e-mail is private and confidential and may contain privileged material. If 
you have received this e-mail in error, please notify the sender and delete it 
immediately. You must not copy, distribute, disclose or use any of the 
information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester plc 
are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] NDMP Restores

2010-03-01 Thread Whelan, Patrick
Update:
ontap for A = 7.2.6.1 
 B = 7.2.5.1
 
the set_ndmp_attr -verify works for both and all the responses are the
same, except for the os version and host id.
 

Regards, 

Patrick Whelan 
NetBackup Specialist 
Wholesale Markets and Treasury  Trading 
Lloyds Banking Group 
Desk: +44 (0) 207 158 6123 
Loc: OBS 2C-132 

 



From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Whelan,
Patrick
Sent: 01 March 2010 18:24
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] NDMP Restores



Hi All, 

Environment: 
Master and media servers Windoze 2003. NDMP filers Netapps (sorry don't
know model or ontap version). 

Scenario: 
Backups from A can be restored to B but not A 
Backups from B can be restored to B. 
Backups from B to A may have worked but I don't remember as it was
awhile ago. I do know that all restore scenarios for B worked.

Ontap for A is newer than B, but I don't have the version numbers. :( 

Has anyone seen a similar problem? 

Regards, 

Patrick Whelan 
NetBackup Specialist 
Wholesale Markets and Treasury  Trading 
Lloyds Banking Group 
Desk: +44 (0) 207 158 6123 
Loc: OBS 2C-132 



This e-mail is private and confidential and may contain privileged
material. If you have received this e-mail in error, please notify the
sender and delete it immediately. You must not copy, distribute,
disclose or use any of the information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1
1YZ. Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V
7HN. Registered in England and Wales, number 2065. Telephone: 020 7626
1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120
George Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237.
Telephone: 0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester
GL4 3RL. Registered in England and Wales, number 2299428. Telephone:
01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester
plc are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.

__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
__


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Parsing through bpimagelist

2010-02-26 Thread Whelan, Patrick
Which OS? on *nix you can use grep, and awk. on toy OS's you can use
find.
 

Regards, 

Patrick Whelan 
NetBackup Specialist 
Wholesale Markets and Treasury  Trading 
Lloyds Banking Group 
Desk: +44 (0) 207 158 6123 
Loc: OBS 2C-132 

 



From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Trudi
Eisenhour
Sent: 26 February 2010 18:14
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Parsing through bpimagelist



Does anyone know of something that will help parse through a bpimagelist
to help me see Client, Kilobytes, and Backup Time in easier way? I
received the output of the nbulog via text and it has so many policies
and clients that it will take me a week to go through it. 

 

Got any magic tools in your back pocket?

 

 

 



The information contained in this transmission may be confidential. Any
disclosure, copying, or further distribution of confidential information
is not permitted unless such privilege is explicitly granted in writing
by Quantum. Quantum reserves the right to have electronic
communications, including email and attachments, sent across its
networks filtered through anti virus and spam software programs and
retain such messages in order to comply with applicable data security
and retention requirements. Quantum is not responsible for the proper
and complete transmission of the substance of this communication or for
any delay in its receipt.



This e-mail is private and confidential and may contain privileged material. If 
you have received this e-mail in error, please notify the sender and delete it 
immediately. You must not copy, distribute, disclose or use any of the 
information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester plc 
are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Steps to change Master Server Name

2010-02-22 Thread Whelan, Patrick
Since you are on MP5.1 MP4 (i.e. before 6.x) you should be able to
change the first bp.conf entry to reflect the name of the new master.
There is actually more to it than this, and there must be a white paper
somewhere, but it is doable. 


Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123
Loc: OBS 2C-132

-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of lookn4me
Sent: 22 February 2010 13:37
To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU
Subject: [Veritas-bu] Steps to change Master Server Name


I plan to replicate a production environment on a test server, but I
need to change the master server name as the test environment will not
be isolated.  Anyone out there have success with the process?  The
environment is Netbackup 5.1 MP4 on solaris 9 and 10 OS.

+--
|This was sent by bt...@comcast.net via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


This e-mail is private and confidential and may contain privileged material. If 
you have received this e-mail in error, please notify the sender and delete it 
immediately. You must not copy, distribute, disclose or use any of the 
information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester plc 
are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
__
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] Command line to do restore preview

2010-02-18 Thread Whelan, Patrick
Hi All,

Does anyone know what the 6.5.4 command is to get a list of tapes needed for a 
restore? Like in the GUI.

Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123




This e-mail is private and confidential and may contain privileged material. If 
you have received this e-mail in error, please notify the sender and delete it 
immediately. You must not copy, distribute, disclose or use any of the 
information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester plc 
are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Has anyone re-provisioned a media server w/ 6.5.xlately?

2010-02-16 Thread Whelan, Patrick
Take a look at the nbemmcmd command. Maybe you -deletehost hostname
and then -addhost hostname. 


Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123


-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Justin
Piszcz
Sent: 16 February 2010 13:03
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Has anyone re-provisioned a media server w/
6.5.xlately?

Hi,

I remember doing this awhile ago (~2 years) when I had a media server
which suffered a failure, re-installed NBU but forgot how I fixed it :)

For this instance, I re-provisioned from RHEL3 to RHEL5 and re-installed
NBU but now NetBackup thinks its a client.

**
* ALERT - ACTION REQUIRED 
**

This installation could fit one of two scenarios.
Follow the instructions that fit your situation.


**

1.  It appears NetBackup is being installed with the intention of
 using a different network interface than the default
(media-server).
 NetBackup daemons will be shut down.  Additional entries must
 be added to /usr/openv/netbackup/bp.conf and
 /usr/openv/volmgr/vm.conf.  The entry and the file affected
 are as follows:

REQUIRED_INTERFACE=master-server (bp.conf)
REQUIRED_INTERFACE=master-server (vm.conf)
DEVICE_HOST=master-server(vm.conf)

 After these entries have been added, start the NetBackup, Media
 Manager and client daemons by executing the following command:

 /usr/openv/netbackup/bin/bp.start_all

**

OR

**

2.  This machine appears to be a member of a cluster.  NetBackup
 daemons will be shut down.  Do not install any NetBackup add-on
 or database agent products on this machine until after the
 NetBackup server has been configured to run in a cluster.  After
 NetBackup server installation activities have occurred on all
 members of the cluster, execute the following command on the
 primary node:

 /usr/openv/netbackup/bin/cluster/cluster_config

**

I should not have to enter the REQUIRED_INTERFACE etc, I am only using
one interface.

Will continue looking into this..

Justin.
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


This e-mail is private and confidential and may contain privileged material. If 
you have received this e-mail in error, please notify the sender and delete it 
immediately. You must not copy, distribute, disclose or use any of the 
information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester plc 
are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
__
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Can't upgrade past 6.0 client

2010-02-15 Thread Whelan, Patrick
Ditto


Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123


-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of
Lightner, Jeff
Sent: 15 February 2010 16:51
To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU
Subject: Re: [Veritas-bu] Can't upgrade past 6.0 client

If you're implying you've asked a question no one has responded to
please be aware this is the first post I've seen from you this year.

-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of zimmy00
Sent: Monday, February 15, 2010 11:29 AM
To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU
Subject: [Veritas-bu] Can't upgrade past 6.0 client


come on guys :(

+--
|This was sent by steve.s...@compucom.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
 
Proud partner. Susan G. Komen for the Cure.
 
Please consider our environment before printing this e-mail or
attachments.
--
CONFIDENTIALITY NOTICE: This e-mail may contain privileged or
confidential information and is for the sole use of the intended
recipient(s). If you are not the intended recipient, any disclosure,
copying, distribution, or use of the contents of this information is
prohibited and may be unlawful. If you have received this electronic
transmission in error, please reply immediately to the sender that you
have received the message in error, and delete it. Thank you.
--
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


This e-mail is private and confidential and may contain privileged material. If 
you have received this e-mail in error, please notify the sender and delete it 
immediately. You must not copy, distribute, disclose or use any of the 
information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester plc 
are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
__
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] NDMP Restores

2010-02-10 Thread Whelan, Patrick
Hello All,

Has anyone had a problem with NDMP restores to the same filer? We can restore a 
file to a different filer, but not to itself. Both restores are going to a 
separate directory just for the restores.
Environment:
Windoze 2003 SP2
Netapps filer
NetBackup 6.5.3
The restores are from DSU or Tape, makes no difference.

Any help/suggestions welcomed.

*   15:52:00 (136287.001) INF - Restoring NDMP files from /vol/data4/Credit 
Trading/ to /vol/scratch 
*   15:52:05 (136287.001) DAR enabled 
*   15:52:07 (136287.001) Restoring Credit Trading/25oct06 download.xls to 
/vol/scratch/25oct06 download.xls 
*   17:10:16 (136287.001) NDMP restore failed from path /vol/data4 
*   17:10:20 (136287.001) Status of restore from image created 06/02/2010 
10:23:06 = file read failed 
*   
*   17:10:21 (136287.xxx) INF - Status = the restore failed to recover the 
requested files. 



Regards,

Patrick Whelan
NetBackup Specialist
Wholesale Markets and Treasury  Trading
Lloyds Banking Group
Desk: +44 (0) 207 158 6123




This e-mail is private and confidential and may contain privileged material. If 
you have received this e-mail in error, please notify the sender and delete it 
immediately. You must not copy, distribute, disclose or use any of the 
information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester plc 
are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] pbx

2009-12-10 Thread Whelan, Patrick
Where can I find VRTSpbx for NetBackup 6.5.4? Please.

 

Patrick Whelan

NetBackup Specialist

Wholesale Markets and Treasury  Trading

Lloyds Banking Group

Desk: +44 (0) 207 158 6123

 



This e-mail is private and confidential and may contain privileged material. If 
you have received this e-mail in error, please notify the sender and delete it 
immediately. You must not copy, distribute, disclose or use any of the 
information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  Gloucester plc 
are authorised and regulated by the Financial Services Authority.

Telephone calls may be monitored or recorded.


__
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
_
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] quick eject script

2009-12-02 Thread Whelan, Patrick
Attached is a perl script that will list the tapes in each drive of a
robot as long as it is run on the robotic control host.

 

 

Patrick Whelan

NetBackup Specialist



From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of
Donaldson, Mark
Sent: 02 December 2009 17:56
To: Veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] quick eject script

 

Still - to answer your question, and take the slot number thing into
account.

 

for tape in `vmquery -a -l | awk '$8!=-  $9!=0  $12~/OFFSITE/
{print $1}'`

do

  eject $tape

done

 

The awk selects robotic tapes (field 8), not slot 0 (field 9), volume
pool contains OFFSITE (field 12) and prints Volume ID (field 1).

 

Note - the change from field 11 below to field 12.  Field 11 is volume
group, not volume pool.  Mea Culpa.

 

The eject function is left as an exercise for now.  Note: it's the
vmchange command.  

 

Suspicion: the vault options may have this built in - I should look at
that one day.

 

-M

 

From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of
Donaldson, Mark
Sent: Wednesday, December 02, 2009 9:57 AM
To: Reynolds, Susan K.; Veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] quick eject script

 

Well - dunno why.  Certainly doesn't work that way for me.

 

 vmoprcmd -d ds | grep Yes

 26 hcart3   TLD   Yes   007766  007766   Yes Yes
0  

 30 hcart3   TLD   Yes   007357  007357   Yes Yes
0

 39 hcart3   TLD   Yes   007195  007195   Yes Yes
0

 

 sudo vmquery -m 007766




media ID:  007766


media type:1/2 cartridge tape 3 (24)

barcode:   007766L4

media description: hcart3

volume pool:   Exchange (32)

robot type:TLD - Tape Library DLT (8)

robot number:  1

robot slot:114


robot control host:uscobrmfa-ug-50

snip




 

From: Reynolds, Susan K. [mailto:sreynol...@semprautilities.com] 
Sent: Tuesday, December 01, 2009 4:58 PM
To: Donaldson, Mark; Veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] quick eject script

 

If slot=0 then it is in a drive; I did a vmquery on a tape that was in a
drive and that's what came back

 

From: Donaldson, Mark [mailto:mark.donald...@staples.com] 
Sent: Tuesday, December 01, 2009 3:55 PM
To: Reynolds, Susan K.; Veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] quick eject script

 

I think your second step is in error - a tape in a drive doesn't update
the vmquery slot number.

 

I'd do something like this...

 

for tape in `vmquery -rn 0 -l | awk '$11~/Offsite/ {print $1}`

do

  eject routine (lots of lines)

done

 

 

I actually do something much like this for offsite purposes.  My
eject_tapes script is 60 lines of code that looks up the library for a
tape given the tape number.  If the tape is in a drive, though, it just
errors .  I supposed I could query the library controls for the tape
location (see if it's in a drive) but right now I just eat the error
when it occurs.

 

-M

 

From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of
Reynolds, Susan K.
Sent: Tuesday, December 01, 2009 3:22 PM
To: Veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] quick eject script

 

Does anyone have a quick eject script the logic of which goes something
like this:

 

1.   Eject any tapes in the OFFSITE volume pool if it is in the tape
library

2.   Ignore tapes in a drive (vmquery slot number =0)

3.   And email the list of tapes to me with a report title and
today's date

 

Is there anything quick and easy out there like that?

 

Appreciate your help.



This e-mail is private and confidential and may contain privileged material. If 
you have received this e-mail in error, please notify the sender and delete it 
immediately. You must not copy, distribute, disclose or use any of the 
information in it or any attachments.

Lloyds Banking Group plc. Registered Office: The Mound, Edinburgh EH1 1YZ. 
Registered in Scotland, number 95000. Telephone: 0131 225 4555.

Lloyds TSB Bank plc. Registered Office: 25 Gresham Street, London EC2V 7HN. 
Registered in England and Wales, number 2065. Telephone: 020 7626 1500.

Lloyds TSB Scotland plc. Registered Office: Henry Duncan House, 120 George 
Street, Edinburgh EH2 4LH. Registered in Scotland, number 95237. Telephone: 
0131 225 4555.

Cheltenham  Gloucester plc. Registered Office: Barnett Way, Gloucester GL4 
3RL. Registered in England and Wales, number 2299428. Telephone: 01452 372372.

Cheltenham  Gloucester Savings is a division of Lloyds TSB Bank plc.
Lloyds TSB Bank plc, Lloyds TSB Scotland plc and Cheltenham  

Re: [Veritas-bu] Bible for Storage Administrators

2007-05-22 Thread Whelan, Patrick
Curtis, any suggestions? :) :)

 

Patrick Whelan 
NetBackup Specialist (Contractor) 
COLT Telecom 
Architect  Engineering 
+44 20 7863 5243 

 

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Angela
Akridge
Sent: 22 May 2007 15:04
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Bible for Storage Administrators

 


Is there a bible for Storage Administrators? I'd like to learn about
all the best practices. Oreilly has a book about backups. Do you have
any recommendations?

Angela



*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Bible for Storage Administrators

2007-05-22 Thread Whelan, Patrick
I believe Dave Little and Dave Chapa are/were frequent visitors. In fact
Curtis's appearance is relatively new, considering how long he's been
doing backups. :) :) IMHO.

Regards,

Patrick Whelan
Senior NetBackup Specialist (Contractor)
COLT Telecom
Architect, Engineering  Operations
+44 20 7863 5243


-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Wayne T
Smith
Sent: 22 May 2007 16:05
To: Angela Akridge; veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Bible for Storage Administrators

There is no bible; the topic is too broad and in flux too much for their

to be a bible, IMHO.

That written, I like (the four year old) Little  Chapa Wiley 
publication Implementing Backup and Recovery: The Readiness Guide for 
the Enterprise, as well as Preston's new O'Riley publication Backup 
and Recovery, not to be confused with his older work UNIX Backup and 
Recovery.

As Curtis Preston spends a considerable amount of his time here on this 
mailing list and on his backupcentral.com web site helping us smucks do 
a better job for our institutions, ... if you buy just one, buy Backup 
and Recovery. :-)

cheers, wayne

Angela Akridge wrote, in part,  on 2007-05-22 10:04 AM:

 Is there a bible for Storage Administrators? I'd like to learn about

 all the best practices. Oreilly has a book about backups. Do you have 
 any recommendations?
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] 5.1 Oct 2007 End of Support

2007-05-17 Thread Whelan, Patrick
Not supported or won't work? We are running some 3.4 clients with the
master at NBU 5.12MP6 and they work fine. Unfortunately we can't upgrade
the Solaris 2.6 clients so we are stuck with 3.4. Of course if they
won't work with 6.x then we can push them to upgrade or get rid of the
boxes. :)

Regards,

Patrick Whelan
NetBackup Specialist (Contractor)
COLT Telecom
Architect  Engineering
+44 20 7863 5243



-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of WEAVER,
Simon (external)
Sent: 17 May 2007 15:25
To: 'Carl Mathews'; VERITAS-BU@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] 5.1 Oct 2007 End of Support


If I understood correctly, older clients are not supported - I think 5.1
or
higher is needed for 6.0!

My clients (some) run 3.4 and are not supported, and I cannot upgrade
them
to the later version at this stage.

Hopefully they will be phased out in 2008.

Regards

Simon Weaver
3rd Line Technical Support
Windows Domain Administrator 

EADS Astrium Limited, B23AA IM (DCS)
Anchorage Road, Portsmouth, PO3 5PU

Email: [EMAIL PROTECTED]



-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Carl
Mathews
Sent: 17 May 2007 14:59
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] 5.1 Oct 2007 End of Support


We have Windows clients running NB_4.5. If will take some time to
upgrade
the clients after the server has been upgraded  to NB_6.0. Does anyone
know
if you can backup-up and restore 4.5 Windows clients with a 6.0 Solaris
server?  Thanks Carl Mathews University of Arkansas

---

We still have a fairly busy 4.5 environment due to older OS versions so

I can't see us moving off our 5.1 environment for a while ... this for 
us is the show-stopper for not upgrading.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

This email (including any attachments) may contain confidential and/or
privileged information or information otherwise protected from
disclosure. If you are not the intended recipient, please notify the
sender immediately, do not copy this message or any attachments and do
not use it for any purpose or disclose its content to any person, but
delete this message and any attachments from your system. Astrium
disclaims any and all liability if this email transmission was virus
corrupted, altered or falsified.

-
Astrium Limited, Registered in England and Wales No. 2449259
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS,
England
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] blib and exclude lists

2007-05-16 Thread Whelan, Patrick
Does anyone have a definitive answer as to whether blib backups will
read or not exclude lists? I have looked through the admin, advanced
client and oracle agent manuals with not success.

Patrick Whelan
NetBackup Specialist (Contractor)
COLT Telecom
Architect  Engineering
+44 20 7863 5243





*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Start NBU non-root

2007-05-11 Thread Whelan, Patrick
True, NetBackup does require root, but you might be able to setuid on
the start-up script and execute it that way, have never actually tried.
I have, in the past setuid on all the entire executables in
netbackup/bin, and changed the group for the files, then started them
with a user belonging to that group. It is a real pain in the ..., but
doable. 

Regards,

Patrick Whelan
NetBackup Specialist (Contractor)
COLT Telecom
Architect  Engineering
+44 20 7863 5243



-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Clooney,
David
Sent: 11 May 2007 10:42
To: Justin Piszcz
Cc: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Start NBU non-root

Thanks Justin,

Well I guess that's that then :-)

Dave

-Original Message-
From: Justin Piszcz [mailto:[EMAIL PROTECTED] 
Sent: 11 May 2007 10:40
To: Clooney, David
Cc: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Start NBU non-root

NBU requires root.  End of story really.

Justin.

On Fri, 11 May 2007, Clooney, David wrote:

 Hi all,



 Scenario:  Linux RD 3 5.1 MP6



 Does anyone know if its possible to start netbackup as non root? Know
it
 sounds strange however this server is used merely for info retrieval
 from other masters through CGI, currently policy specifies that apache
 cannot be started as root understandably for security reasons.



 If I could start NBU as the same user as what apache does, it would
make
 my life a lot easier ?



 Regards



 Dave

 This email (including any attachments) may contain confidential and/or
 privileged information or information otherwise protected from
 disclosure. If you are not the intended recipient, please notify the
 sender immediately, do not copy this message or any attachments and do
 not use it for any purpose or disclose its content to any person, but
 delete this message and any attachments from your system. Astrium
 disclaims any and all liability if this email transmission was virus
 corrupted, altered or falsified.
 -
 Astrium Limited, Registered in England and Wales No. 2449259
 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1
2AS,
 England




 Notice to recipient:
 The information in this internet e-mail and any attachments is
confidential and may be privileged. It is intended solely for the
addressee. If you are not the intended addressee please notify the
sender immediately by telephone. If you are not the intended recipient,
any disclosure, copying, distribution or any action taken or omitted to
be taken in reliance on it, is prohibited and may be unlawful.

 When addressed to external clients any opinions or advice contained in
this internet e-mail are subject to the terms and conditions expressed
in any applicable governing terms of business or client engagement
letter issued by the pertinent Bank of America group entity.

 If this email originates from the U.K. please note that Bank of
America, N.A., London Branch and Banc of America Securities Limited are
authorised and regulated by the Financial Services Authority.




Notice to recipient:
The information in this internet e-mail and any attachments is
confidential and may be privileged. It is intended solely for the
addressee. If you are not the intended addressee please notify the
sender immediately by telephone. If you are not the intended recipient,
any disclosure, copying, distribution or any action taken or omitted to
be taken in reliance on it, is prohibited and may be unlawful.

When addressed to external clients any opinions or advice contained in
this internet e-mail are subject to the terms and conditions expressed
in any applicable governing terms of business or client engagement
letter issued by the pertinent Bank of America group entity.

If this email originates from the U.K. please note that Bank of America,
N.A., London Branch and Banc of America Securities Limited are
authorised and regulated by the Financial Services Authority.
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or 

[Veritas-bu] 5.1 MP6

2007-05-03 Thread Whelan, Patrick
Has anyone had problems installing MP6 on 5.1 on HP-UX? I have installed
on two of our five successfully, but the other three either fail, or
fail to start after a successful install. Any clues would be
appreciated.

Regards,

Patrick Whelan
NetBackup Specialist (Contractor)
COLT Telecom
Architect  Engineering
+44 20 7863 5243





*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] Moving tapes to a different pool.

2007-04-30 Thread Whelan, Patrick
Has anyone tried this successfully and consistently? I have done it for
one tape and everything seemed to work, but I wanted to know if anyone
has tried it before doing the rest of the tapes.

Patrick Whelan
NetBackup Specialist (Contractor)
COLT Telecom
Architect  Engineering
+44 20 7863 5243





*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Moving tapes to a different pool.

2007-04-30 Thread Whelan, Patrick
Oops. Written, assigned tapes.

Patrick Whelan
NetBackup Specialist (Contractor)
COLT Telecom
Architect  Engineering
+44 20 7863 5243



-Original Message-
From: Justin Piszcz [mailto:[EMAIL PROTECTED] 
Sent: 30 April 2007 14:54
To: Whelan, Patrick
Cc: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Moving tapes to a different pool.

Scratch tapes to a different pool or written-to tapes?

On Mon, 30 Apr 2007, Whelan, Patrick wrote:

 Has anyone tried this successfully and consistently? I have done it
for
 one tape and everything seemed to work, but I wanted to know if anyone
 has tried it before doing the rest of the tapes.

 Patrick Whelan
 NetBackup Specialist (Contractor)
 COLT Telecom
 Architect  Engineering
 +44 20 7863 5243







*
 The message is intended for the named addressee only and may not be
disclosed to or used by anyone else, nor may it be copied in any way.

 The contents of this message and its attachments are confidential and
may also be subject to legal privilege.  If you are not the named
addressee and/or have received this message in error, please advise us
by e-mailing [EMAIL PROTECTED] and delete the message and any
attachments without retaining any copies.

 Internet communications are not secure and COLT does not accept
responsibility for this message, its contents nor responsibility for any
viruses.

 No contracts can be created or varied on behalf of COLT
Telecommunications, its subsidiaries or affiliates (COLT) and any
other party by email Communications unless expressly agreed in writing
with such other party.

 Please note that incoming emails will be automatically scanned to
eliminate potential viruses and unsolicited promotional emails. For more
information refer to www.colt.net or contact us on +44(0)20 7390 3900.




*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] NB6.0 MP4: After change of users to LDAP, cannot start Java GUI anymore

2007-04-20 Thread Whelan, Patrick
The java log files are, I believe, in /usr/openv/java/logs.

Patrick Whelan
NetBackup Specialist (Contractor)
COLT Telecom
Architect  Engineering
+44 20 7863 5243



-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Alexander Skwar
Sent: 20 April 2007 08:35
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] NB6.0 MP4: After change of users to LDAP,cannot
start Java GUI anymore

Hello.

Yesterday night, I switched the user and group database on our Sparc 
Solaris 10 NB6.0 MP4 system from files (ie. /etc/group  /etc/passwd 
/etc/shadow) to LDAP (OpenLDAP 2.3.31, running on the same host). In
/etc/nsswitch.conf, I've changed (complete nsswitch.conf at 
http://askwar.pastebin.ca/449498):

passwd: files ldap
group:  files ldap

All the other databases (hosts, services, ...) are untouched; ie. they
are set to files. I only moved the following users to LDAP - none
of them has anything to do with NBU:

apfister, askwar, bea81, conf, dev1, dev2, dev3, dev4, dev5, dev6, dev7,

hwieneck, monitor, tcalpha50, tcalpha51, tcasos, tcbeta50, tcbeta51, 
tce501, tce510, tcpre50, tcpre51, tcpro51, tcpro, tcref50, tcref51,
tomcat

Since after that change, I cannot login to the Java Console from another
(Linux, non-LDAP) machine by running /usr/openv/java/jnbSA. When I click
on Login, I get an error message:

Unable to login, status: 525
Can not connect to the NB-Java
authentication service via VNETD on
winds06 on port 13724.  Check
the log file for more details.

Well - what log file?

On winds06 (the server that I'm trying to login to), I ran 
/usr/openv/netbackup/logs/mklogdir, which created all the logdirs
in the logs directory; among them is a vnetd directory. But there's
nothing in there. The only files that have been created directly
after I ran are

admin/log.042007
bpcompatd/log.042007
bpdbjobs/log.042007
bpdbm/log.042007
bpjobd/log.042007
bplist/log.042007
bprd/log.042007
nbproxy/log.042007

You can find them at
http://alexander.skwar.name/~askwar/stuff/netbackup-log-files.tar.

When I, with root perms, run /usr/openv/bin/vnetd manually, a
file IS created in the vnetd directory. Contents:

[EMAIL PROTECTED] /usr/openv/netbackup/logs $ cat vnetd/log.042007 
09:33:45.174 [8772] 2 logparams: /usr/openv/bin/vnetd 
09:33:45.175 [8772] 2 ProcessRequests: vnetd.c.284: msg:
getsockname(5) failed

Restarting inetd (by running svcadm restart inetd) did also not help.

What's going wrong there? Why does vnetd not start?

Thanks,

Alexander Skwar

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] NetBackup certification exam in London (UK)

2007-04-17 Thread Whelan, Patrick
Having googled myself to death, I'm calling on you all to see if anyone
knows where to go to take the NetBackup certification tests in London.
Or failing that, if you have a tried and tested google search string
that will locate it, that would also be good.

Thanks in advance.

Regards,

Patrick Whelan
NetBackup Specialist (Contractor)
COLT Telecom
Architect  Engineering
+44 20 7863 5243





*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Problem recycling old CATALOG tapes

2007-04-13 Thread Whelan, Patrick
Try running the first try again only use -d hcart2. According to your vmquery 
output it is a ½ tape not dlt. If that doesn't' work try HCART2.

 

Patrick Whelan 
NetBackup Specialist 
Architect  Engineering 
+44 20 7863 5243 

... Als sie mich holten, gab es keinen mehr, der protestieren konnte 
- Martin Niemöller 

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Szekely-Bencedi, 
Endre (Genworth, Contractor)
Sent: 13 April 2007 12:02
To: [EMAIL PROTECTED]
Subject: [Veritas-bu] Problem recycling old CATALOG tapes

 

Hi Everyone,

 

I've been having some problems with my backups since a week. I found this list 
googleing around, hope you can spare a few minutes to read this and maybe help 
me.

 

I don't know much of backups really, I needed to start and handle media a few 
weeks ago. We usually have 12-15 tapes filled each day with backups, half of it 
goes ofsite with a month retention (including catalog tapes), half we keep 
here talking of daily backups of course.

The guy before me showed me that sometimes tapes don't get deassigned after 
expiration; he told me roughly how to check for this and how to deassign/expire 
a tape manually.

He also told me I should place old catalog tapes back to scratch pool.

 

Now. As I started to understand more about netbackup, I realised we have lots 
of frozen tapes. Tapes that always get assigned but don't get written. I have 
turned on bptm log and noticed these are all old catalog tapes (googled the 
error message). The problem is, since we always put old catalog tapes back to 
scratch pool, the next day's catalog tape will be a random tape. So, we just 
end up with more and more catalog tapes that we cannot write on. I guess this 
was just a mistake noone noticed before...

 

Anyway. I have unfrozen the tape and the next day it got frozen again. Then I 
have found some docs saying that if you want to recycle a catalog tape you need 
to relabel it. But, relabeling doesn't work for me... tried 2 methods so far:

 

Z:\bplabel -ev 000188 -d dlt
Requested number of drives are not configured

 

in the Activity Monitor I have:

 

12/04/2007 14:38:40 - begin Label
12/04/2007 14:38:40 - started process bplabel (976)
12/04/2007 14:38:40 - mounting 000188
12/04/2007 14:38:41 - Error bplabel(pid=976) Requested number of drives are not 
configured
12/04/2007 14:38:41 - end Label; elapsed time: 00:00:01
error requesting media (tpreq)(98)

 

Then I tried to relabel using the GUI:

12/04/2007 14:41:49 - begin Label
12/04/2007 14:41:49 - started process bplabel (77988)
12/04/2007 14:41:49 - mounting 000188
12/04/2007 14:42:39 - mounted; mount time: 00:00:50
12/04/2007 14:42:42 - expected media 000188; found NetBackup media
12/04/2007 14:42:42 - end Label; elapsed time: 00:00:53
media manager found wrong tape in drive(93)

 

Okay, I know sometimes you can get error if the media type is different - I am 
not even sure how to check what it is...

For example I got this tape:

C:\vmquery -m 000200


media ID:  000200
media type:1/2 cartridge tape 2 (14)
barcode:   000200L2
media description: Added by Media Manager
volume pool:   SCRATCH (3)
robot type:TLD - Tape Library DLT (8)
robot number:  0
robot slot:9
robot control host:fileserver1.domain
volume group:  00_000_TLD
vault name:---
vault sent date:   ---
vault return date: ---
vault slot:---
vault session id:  ---
vault container id:-
created:   19/07/2005 17:35:25
assigned:  ---
last mounted:  13/04/2007 10:34:03
first mount:   20/07/2005 10:21:40
expiration date:   ---
number of mounts:  65
max mounts allowed:---


 

This tape is one of the many I am keeping an eye on since the past days and 
can't get to write them. I also tried to delete it using 'vmdelete', hoped 
netbackup will forget about it but it didn't - at the next backup try the tape 
got frozen again because it contains VERITAS NetBackup (tm) database backup 
data and cannot be used for backups.

 

If you got any ideas, please don't hesitate to help me.

 

Thanks,

Endre

 



*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not 

[Veritas-bu] Multiple Retention Levels

2007-04-01 Thread Whelan, Patrick
Environment
NBU 5.1MP4
HP-UX 11.11
Does anyone know which command, if any, I can use from the command line
(and thefore shell scripts) to determine if the allow multiple retention
level box has been ticked by some idiot in another country who will not
fess up to it.

In case you think I'm pissed off, you're right. I have now had to go to
the remote site twice in one week to cycle tapes and will have to go
again on Monday, because of this screwup (normally we only have to go
every two weeks). So if there is a command line way to check, than I can
write a script to catch it before it does too much harm.

Thank you for allowing me to rant.

Regards,

Patrick


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] How to check the approx. available space on a tape?

2007-03-29 Thread Whelan, Patrick
Since no two tapes are exactly the same length, what is this going to tell you, 
even if you did find out where the EOT marker was? I suppose if your are really 
insistent on the length of tape (there always seems to be one every year), you 
could take one apart, measure it's length, try to determine where the EOT is, 
find the percentage of the tape up to that point and use this as a general rule 
for all other tapes. Of course to know for sure you are going to have to take 
apart all tapes and measure each one just to be sure. Having never actually 
tried this, I can only assume that winding the tape back in to the cartridge 
could be a real bear.

Regards, 

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

A shocking crime was committed on the unscrupulous initiative of few 
individuals, with the blessing of more, and amid the passive acquiescence of 
all. - Publius Cornelius Tacitus

In a state where corruption abounds, laws must be very numerous.  - Publius 
Cornelius Tacitus

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
- Martin Niemöller 


-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alexander Skwar
Sent: 29 March 2007 14:52
To: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Howto check the approx. available space on a tape?

Martin, Jonathan (Contractor) [EMAIL PROTECTED] wrote:

 There's no way to tell exactly how much more data a single tape will
 hold, since anything better than 100GB (in your example) is compression
 and compression varies by file type.

Yes, I know. I'm not looking for an exact number. I don't know how
LTO tapes exactly work, but I suppose that the tape is written now
until a certain position. If the tape is 609 meter long, it might be
written up to 550 meters, which would be about 90%. Or is that assumption
completely off?

Alexander Skwar

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Checking to see if millions of files are backed up?

2007-03-26 Thread Whelan, Patrick
Why not have a script that runs a backup followed by an archive. Check
the error code of the backup, if is not 0 then don't run the archive. If
it is 0 then run the archive which will automatically delete the files
when it completes successfully. It will not delete antything if it fails
even with a 1.

Regards,

Patrick Whelan

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Justin
Piszcz
Sent: 26 March 2007 22:36
To: [EMAIL PROTECTED]
Cc: Veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Checking to see if millions of files are
backed up?


The problem with that is two-fold:

1. We backup multiple copies of the data, therefore, the archive option
will not work. 2. What if a tape has an I/O error half way through the
archive process? Yikes.

Justin.

On 3/26/07, Bobby Williams [EMAIL PROTECTED] wrote:
 Why not set up an archive schedule?  That way, the files can be 
 archived and NetBackup will ensure that they are on tape before 
 removing.




 Bobby Williams
 2205 Peterson Drive
 Chattanooga, Tennessee  37421
 423-296-8200

 -Original Message-
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED] On Behalf Of Justin

 Piszcz
 Sent: Monday, March 26, 2007 4:27 PM
 To: Veritas-bu@mailman.eng.auburn.edu
 Subject: [Veritas-bu] Checking to see if millions of files are backed 
 up?

 If one is to create a script to ensure that the files on the 
 filesystem are backed upon before removing them, what is the best 
 data-store model for doing so?

 Obviously, if you have  1,000,000 files in the catalog and you need 
 to check each of those, you do not want to bplist -B -C -R 99 
 /path/to/file/1.txt for each file.  However, you do not want to grep 
 1 one_gigabyte_catalog.txt either as there is really too much 
 overhead in either case.

 I have a few ideas that involves neither of these, but I was wondering

 if anyone out there had already done something similar to this that 
 was high performance?

 Justin.
 ___
 Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu 
 http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] (46) server not allowed

2007-03-19 Thread Whelan, Patrick
Be sure DISALLOW_SERVER_WRITES (sp?) = NO. You run bpgetconfig -M client and 
grep/find for DISALLOW and check that it is set to no. If it is set to yes, you 
can only change it on the client.

regards,

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary and 
those who don't.

Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller



From: Ian 
Sent: Mon 19/03/2007 6:27 PM
To: Broun, Bevan
Cc: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] (46) server not allowed


Hi Bevan,

Sounds like the Netbackup server is not set on the client. If it was a
UNIX client I'd say check the bp.conf file for the SERVER setting, but
for a Windows client I believe this is set in the registry and is
usually done at install time.

For the registry stuff I don't know exactly the location, but if you
run regedit on the Windows client and do a search (F3) and search for
the string SERVER using match case.
It will be under the LOCAL/SOFTWARE branch called VERITAS, if you can
find that then search from there. Check the registry leaves called
SERVER and/or MEDIA_SERVER. The SERVER one should be set to the
hostname of the Netbackup server. I suspect one of these is incorrect.

Maybe before you do this make sure that the Netbackup server hostname
and IP address can be correctly resolved from the client.

Hope this helps.

Ian

On 3/19/07, Broun, Bevan [EMAIL PROTECTED] wrote:
 Hi All

 we are running version 5.1. Client is windows 2000 and server is windows
 2000.

 Im getting (46) server not allowed when getting the client properties. I
 cant restore to the system from the server.

 I know about  bpclntcmd but have only used it once.

 Idea's thanks

 BB

 Bevan Broun
 Systems Engineer
 --
 Civil - Integration  Outsourcing Services
 Thales Australia
 Address
 Address
 T: (02) 9562 2861
 F: (02) 9562 2857
 M: 0407 225 492
 Email : [EMAIL PROTECTED]
 www.thalesgroup.com.au



 DISCLAIMER:---
 This Email may contain confidential and/or privileged information and is 
 intended
 solely for the addressee(s) named. If you have received this information in 
 error, or
 are advised that you have been posted this Email by accident, please notify 
 the
 sender by return Email, do not redistribute it, delete the Email and keep no 
 copies.
 --

 ___
 Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
 http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Two Netbackup questions

2007-03-09 Thread Whelan, Patrick
1) If you do not backup server2 at all, you could create a symbolic link from 
server1 so that when you did a search on server2 it would find the backups for 
server1.

2) tpreq -m media_id [-a (r/w)] [-d density] [-p poolname] [-f] filename
   rsh client dump 0f - /mnt/volume_name  filename
   tpunmount [-f] filename [-force]

Regards,

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

A shocking crime was committed on the unscrupulous initiative of few 
individuals, with the blessing of more, and amid the passive acquiescence of 
all. - Publius Cornelius Tacitus

In a state where corruption abounds, laws must be very numerous.  - Publius 
Cornelius Tacitus

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
- Martin Niemöller 


-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Courteney, 
Jonathan
Sent: 09 March 2007 10:55
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Two Netbackup questions


 
I've got two questions which I'm trying to find some info on. I
understand this might not be supported but  

1) is it possible within netbackup to backup volumes on one server but
catalog them as belonging to another server entirely ? Example I have a
server called server1 drives F;G;H and I. I install a netbackup windows
client on this server and backup in the normal way. However I want
netbackup to catalog it as belonging to server2. Should I ever wish to
restore this data is will be show as originating from server2. 

2) is it possible to backup data via RSH from a client with no netbackup
client software installed ? So here's my theory. So on the media server
i can run a 

rsh client dump 0f - /mnt/volume_name  /tmp/test.dump 

this gives me a unix dump file on the media server called test.dump. 

What I want to do is something similar but get netbackup to write the
data to tape ie not create a local file. My understanding would be that
the remote dump process writes to the STDOUT then the netbackup job
would us it's STDIN as the input ( datastream ) and write this data to
tape. 


Thanks in advance. 


--
This e-mail is confidential and the information contained in it may be 
privileged.  It should not be read, copied or used by anyone other than the 
intended recipient.  If you have received it in error, please contact the 
sender immediately by telephoning +44 (0)20 7623 8000 or by return email, and 
delete the e-mail and do not disclose its contents to any person.  We believe, 
but do not warrant, that this e-mail and any attachments are virus free, but 
you must take full responsibility for virus checking.  Please refer to 
http://www.dresdnerkleinwort.com/disc/email/ and read our e-mail disclaimer 
statement and monitoring policy.

Dresdner Kleinwort is the trading name of the investment banking division of 
Dresdner Bank AG, and operates through Dresdner Bank AG, Dresdner Kleinwort 
Limited, Dresdner Kleinwort Securities Limited and their affiliated or 
associated companies.  Dresdner Bank AG is a company incorporated in Germany 
with limited liability and registered in England (registered no. FC007638, 
place of business 30 Gresham Street, London EC2V 7PG), and is authorised by the 
German Federal Financial Supervisory Authority and by the Financial Services 
Authority ('FSA') and regulated by the FSA for the conduct of designated 
business in the UK.  Dresdner Kleinwort Limited is a company incorporated in 
England (registered no. 551334, registered office 30 Gresham Street, London 
EC2V 7PG), and is authorised and regulated by the FSA.  Dresdner Kleinwort 
Securities Limited is a company incorporated in England (registered no. 
1767419, registered office 30 Gresham Street, London EC2V 7PG), and is 
authorised a!
 nd regulated by the FSA.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and 

Re: [Veritas-bu] Frozen tape characteristics?

2007-02-16 Thread Whelan, Patrick
Point of clarification.
The only differences between FROZEN and SUSPENDED:
1) Suspending has to be done manually
2) When all the images on a SUSPENDED tape have expired the tape will be 
re-used.

Otherwise they are treated the same in that NetBackup will read from the tape 
if a restore needs it.

Regards,

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary
and those who don't.

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeff Lightner
Sent: 16 February 2007 14:34
To: Justin Piszcz; Ueli Schweizer
Cc: Veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Frozen tape characteristics?

Typically we make tapes SUSPENDED rather than FROZEN when we want to
reserve them for a restore (e.g. avoid vaulting using them for
duplication or other backups using them).  I was under the impression
you couldn't restore from a FROZEN tape.

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Justin
Piszcz
Sent: Friday, February 16, 2007 5:37 AM
To: Ueli Schweizer
Cc: Veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Frozen tape characteristics?

Thanks.

On Fri, 16 Feb 2007, Ueli Schweizer wrote:

 It will try to do the restore using the frozen tape.

 Ueli Schweizer

 AGITE Software AG . Boesch 43 . CH-6331 Huenenberg . Switzerland
 Direct: +41 79 204 9190 . Phone: +41 41 781 5678 . Fax: +41 41 781
5677
 [EMAIL PROTECTED] . http://www.AGITE-Software.com

 backupVISUAL...
  ...we make life on backup easy
 -Original Message-
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED] On Behalf Of Justin
 Piszcz
 Sent: Friday, February 16, 2007 10:20 AM
 To: Veritas-bu@mailman.eng.auburn.edu
 Subject: [Veritas-bu] Frozen tape characteristics?

 Quick frozen tape question,

 I need to re-visit the docs.

 When a tape is frozen, no more backups can be written to it.
 When a tape is frozen and it is part of a restore, what happens?
 It says the media is unavailable or does it try to do the restore?

 Justin.
 ___
 Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
 http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] List of backuped files

2007-02-09 Thread Whelan, Patrick
According to the command line manual for 6.0 bplist is still there.

 

Patrick Whelan 
NetBackup Specialist 
Architect  Engineering 
+44 20 7863 5243 

Of all the things I've lost, I miss my mind the most! - Unknown 

There are only 10 kinds of people on earth - those who understand binary 
and those who don't. 

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller 

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Edwin Bader
Sent: 09 February 2007 13:02
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] List of backuped files

 

Hi,

 

 

I have request from customers that they want a list of backuped files, is there 
a command available in NBU 6.0 Mp4 ?

 

Thanks.

 

 

 

 

Edwin Bader



*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] Linux media server recommendations

2007-02-07 Thread Whelan, Patrick
Does anyone have any suggestions for Linux media servers?

Regards,

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary
and those who don't.

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller



*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] RES: RES: Moving assigned media to another

2007-02-02 Thread Whelan, Patrick
The software has been installed on lonbrk11 and 12. Where are the physically 
located so I can add them to the correct policy?

Regards,


Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary
and those who don't.

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of ankur kumar
Sent: 02 February 2007 17:12
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] RES: RES: Moving assigned media to another


Carlos its like playing with a gun, you never know
when its gonna fire.

vmquery -deassignbyid - would deassign the media from
the VolDb on the master server. - means its available
to be assigned again for backup.

vmchange would change the volume pool listed in the
VOLDB without changing the assigned status.

- whaddya think guys


Warmest Regards
Ankur Kumar
[EMAIL PROTECTED]


 

Bored stiff? Loosen up... 
Download and play hundreds of games for free on Yahoo! Games.
http://games.yahoo.com/games/front
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Expiring images and tapes

2007-01-31 Thread Whelan, Patrick
How about with the backupid:

 

bpexpdate: -backupid backup id -d mm/dd/ HH:MM:SS | 0 | infinity 

 [-client name] [-copy number] [-force]

 [-M master_server,...,master_server]

 

Patrick Whelan 
NetBackup Specialist 
Architect  Engineering 
+44 20 7863 5243 

Of all the things I've lost, I miss my mind the most! - Unknown 

There are only 10 kinds of people on earth - those who understand binary 
and those who don't. 

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller 

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Akker Henk van 
den
Sent: 31 January 2007 15:15
To: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Expiring images and tapes

 

All, 

bpexpdate -m MEDIAID -d 0 does not do the trick. 
I think because it are copy 2 tapes, when I try this on a single tape it works 
fine but on those duplicates it doesn't expire the tape. 

Seems there is still a connection between the copy 1 tape and the copy 2 tape. 

 

Henk van den Akker 

Afdeling ITT 
NV Waterleiding Maatschappij Limburg 



Meer informatie over WML en hoe u met ons in contact kunt treden, vindt u op de 
website www.wml.nl.
De informatie verzonden met dit e-mail bericht is uitsluitend bestemd voor de 
geadresseerde. Gebruik van deze informatie door andere dan de geadresseerde is 
verboden. Openbaarmaking, vermeningvuldiging, verspreiding en/of verstrekking 
van deze informatie aan derden is niet toegestaan. WML staat enkel in voor de 
juistheid, volledigheid en rechtsgeldigheid van deze informatie indien deze 
informatie formeel (per gewone post) bevestigd is. In alle andere gevallen 
kunnen aan deze informatie geen rechten worden ontleend.

NV Waterleiding Maatschappij Limburg - Handelsregister Maastricht 14602038 



*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Script for Daily Backup Totals

2007-01-18 Thread Whelan, Patrick
Does that work on Windows?

 

Patrick Whelan 
NetBackup Specialist 
Architect  Engineering 
+44 20 7863 5243 

Of all the things I've lost, I miss my mind the most! - Unknown 

There are only 10 kinds of people on earth - those who understand binary 
and those who don't. 

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller 

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Fogarty
Sent: 18 January 2007 15:48
To: 'Conner, Mike'; 'NB List Mail'
Subject: Re: [Veritas-bu] Script for Daily Backup Totals

 

TOTAL=`/usr/openv/netbackup/bin/admincmd/bpimagelist -U -hoursago 24 | awk 
'{t+=$5}END{print t/100}'`

 

Prints it out the total data backe up in GB. 

 

Steve

 



From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Conner, Mike
Sent: Thursday, January 18, 2007 11:06 AM
To: NB List Mail
Subject: [Veritas-bu] Script for Daily Backup Totals

I have NBU 5.1 MP5 on Windows.  I was curious if anyone had a script for 
getting a daily backup total.  I am using bpcatlist but it comes back with a 
value like 2G, 400M, 760k.  Is there a command that will return a value just in 
kilobytes?

Thanks

Mike

 



From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Hindle, Greg
Sent: Thursday, January 18, 2007 9:17 AM
To: NB List Mail
Subject: [Veritas-bu] moving assigned media

 

Solaris 9 nb 5.0 mp6

 

Is there any easy way to move assigned media from one volume pool to another?  
We have recreated our volume pools to meet new internal standards but I have a 
bunch of tapes that cannot be moved because they are assigned. The last time I 
talked to Symantec they said it was messy trying to move tapes from one pool to 
another. Does anyone have a easy way to do this?

 

Greg 

 This e-mail and any attachments are confidential, may contain legal,
professional or other privileged information, and are intended solely for the
addressee.  If you are not the intended recipient, do not use the information
in this e-mail in any way, delete this e-mail and notify the sender. CEG-IP2


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Pre-/Post-Exec scripts with NetBackup 5.1?

2007-01-09 Thread Whelan, Patrick
The full format of the bp_notify file names is:

bstart_notify[.policy_name][.schedule_name]
bpend_notify[.policy_name][.schedule_name]

If the policy allows multiple streams, than the scripts will be called for each 
stream. To activate the scripts, move them to /usr/openv/netbackup/bin and be 
sure they are executable and they do not send output to STDOUT or STDERR, 
otherwise they will fail, as will the backup. If the scripts are going to take 
longer than 300 seconds to run, you will need to increase the timeout, see 
manual as I don't remember the parameter name. One more thing to keep in mind 
is that the file list of what is to be backed up is generated BEFORE the notify 
script is called and can not be changed by the bpstart_notify script.

Regards,

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary
and those who don't.

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alexander Skwar
Sent: 09 January 2007 12:23
To: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Pre-/Post-Exec scripts with NetBackup 5.1?

Hi!

Whelan, Patrick wrote:
 Look at bpstart_notify and bpend_notify examples in 
 /usr/openv/netbackup/bin/goodies.

Thanks a lot. This seems to be very much what I'm looking for.

Some questions, though. How do I install this script? Do I
need to copy it to some special directory?

In the comments it says:

# This script is called by NetBackup when bpbkar is started up on the client
# to do a backup or archive.

Suppose I've got 2 directories in a Backup Selection. Will this script
be started twice? If so, can I somehow find out which directory is
going to be backed up?

Thanks,

Alexander Skwar
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Exclusions

2007-01-09 Thread Whelan, Patrick
Have you tried *\.mp3 ?

 

Patrick Whelan 
NetBackup Specialist 
Architect  Engineering 
+44 20 7863 5243 

Of all the things I've lost, I miss my mind the most! - Unknown 

There are only 10 kinds of people on earth - those who understand binary 
and those who don't. 

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller 

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Martin, Jonathan 
(Contractor)
Sent: 09 January 2007 13:28
To: Edson Noboru Yamada
Cc: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Exclusions

 

The .mp3 is actually important.  The actual file extension I'm trying to ban is 
.tran - I'm testing with .mp3 and a few other things.  files that end in tran 
(no dot) are actually good files that need to be backed up.

 

-Jonathan

 



From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Edson Noboru 
Yamada
Sent: Tuesday, January 09, 2007 5:05 AM
Cc: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Exclusions

Have you tried this?

*mp3 


hth

On 1/8/07, Martin, Jonathan (Contractor) [EMAIL PROTECTED]  wrote: 

I'm trying to figure out how to exclude a certain file suffix from all backups 
on a certain Linux/Unix client.  Say *.mp3.  In testing, creating *.mp3 doesn't 
work, nor does /*.mp3.  I think the only way to make this work (and I think its 
kind of silly) is to say

 

/*.mp3

/*/*.mp3

/*/*/*.mp3

/*/* /*/*.mp3

/*/* /*/*/*.mp3

/*/* /*/*/*/*.mp3

/*/* /*/*/*/*/*.mp3

/*/* /*/*/*/* /*/*.mp3

/*/* /*/*/*/*/* /*/*.mp3

/*/* /*/*/*/*/* /*/*/*.mp3

/*/* /*/*/*/*/* /*/*/*/*.mp3

/*/* /*/*/*/*/* /*/*/* /*/*.mp3

 

 

etc...

 

Any better ideas?

 

-Jonathan


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu 
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu



 



*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Pre-/Post-Exec scripts with NetBackup 5.1?

2007-01-09 Thread Whelan, Patrick
You could:

bpdbjobs -most_columns | grep backupid | awk -F, '{ print $17 }'

Caveat emptor.

Regards,

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary
and those who don't.

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alexander Skwar
Sent: 09 January 2007 13:16
To: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Pre-/Post-Exec scripts with NetBackup 5.1?

Hello again :)

Ed Wilts wrote:
 On 1/9/2007 6:22 AM, Alexander Skwar wrote:
 Hi!

 Whelan, Patrick wrote:
 Look at bpstart_notify and bpend_notify examples in 
 /usr/openv/netbackup/bin/goodies.
 Thanks a lot. This seems to be very much what I'm looking for.

 Some questions, though. How do I install this script? Do I
 need to copy it to some special directory?
 
 Copy it it to /usr/openv/netbackup/bin 

That's it - also thanks to Patrick reg. his hint on how to name that
file.

 It will get called for every stream.  

Hm, okay. I now have a VERY basic script, which does:

 echo pwd: `pwd`  $OUTF
 echo Params: $@  $OUTF
 echo  $OUTF
 env | sort  $OUTF

In OUTF, I find:



Tue Jan 9 14:14:10 CET 2007 full backup started on winds06 - policy TEST 
schedule TestSched
pwd: /root
Params: winds06 TEST TestSched FULL


BACKUPID=winds06_1168348386
BACKUPTIME=Tue Jan  9 14:13:06 2007
BPEND_TIMEOUT=300
BPSTART_TIMEOUT=300
IS_NETBACKUP_DAEMON=YES
KEYWORD=NONE
LC_COLLATE=en_US.ISO8859-1
LC_CTYPE=en_US.ISO8859-1
LC_MESSAGES=C
LC_MONETARY=en_US.ISO8859-1
LC_NUMERIC=en_US.ISO8859-1
LC_TIME=en_US.ISO8859-1
PATH=/usr/sbin:/usr/bin
RESTARTED=0
SMF_FMRI=svc:/network/bpcd/tcp:default
SMF_METHOD=inetd_start
SMF_RESTARTER=svc:/network/inetd:default
STREAM_COUNT=2
STREAM_NUMBER=1
STREAM_PID=18379
STREAMS=0
TZ=Europe/Zurich
UNIXBACKUPTIME=1168348386


Can I somehow find out, which directory is currently being
backed up?

I see that there are environment variables called STREAM_*.
Are those somehow useful for me?

Using the STREAM_PID, I find:

[EMAIL PROTECTED] ~ $ ps -ef | grep 18379
   askwar 18394 18337   0 14:14:37 pts/13  0:00 grep 18379
 root 18379 1   0 14:14:11 ?   0:00 bpbkar -r 1209600 -ru root 
-dt 0 -to 7200 -clnt winds06 -class TEST -sched Test

Hm.

Cheers,

Alexander Skwar
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Pre-/Post-Exec scripts with NetBackup 5.1?

2007-01-09 Thread Whelan, Patrick
Ok, disregard last email. How about (ASSUMING you have bpbkar logging turned on 
on the client):

Grep \[STREAM_PID\] | grep Processing | cut -d   -f8-

Regards,

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary
and those who don't.

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alexander Skwar
Sent: 09 January 2007 14:16
To: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Pre-/Post-Exec scripts with NetBackup 5.1?

Hi!

Whelan, Patrick wrote:
 You could:
 
 bpdbjobs -most_columns | grep backupid | awk -F, '{ print $17 }'

Hm, there's no bpdbjobs on the client :( On the master server,
I find it in  /opt/openv/netbackup/bin/admincmd. And even on
the server, bpdbjobs doesn't print what I need :(

I called the backup policy TEST.  Now I did:

(winds03)askwar$ sudo /opt/openv/netbackup/bin/admincmd/./bpdbjobs 
-most_columns | grep TEST | tail -1
12031,0,3,0,TEST,TestSched,winds06,winds03,1168348027,000190,1168348217,L25_Tape_Drive_winds03_SR,1,,31744,1450,,100,22659,root,0,0,0,0,root,winds03,2,2,0,,,0,0,0,7019,,22662W011L1,1,,,1,0,0,winds06_1168348028,,

(winds03)askwar$ sudo /opt/openv/netbackup/bin/admincmd/./bpdbjobs 
-most_columns | grep TEST | tail -1 | awk -F, '{print $17}'


Hm. Nothing :( And also in the other lines printed by bpdbjobs,
there's never a directory name printed :(

(winds03)askwar$ sudo /opt/openv/netbackup/bin/admincmd/./bpdbjobs 
-most_columns  | awk -F, '{print $17}' | sort | uniq



 Caveat emptor.

Why?

Alexander Skwar
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Pre-/Post-Exec scripts with NetBackup 5.1?

2007-01-09 Thread Whelan, Patrick
Ah, that's because the job had completed, which it probably won't be at the 
time the bpstart_notify script is called. :)

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary
and those who don't.

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alexander Skwar
Sent: 09 January 2007 14:16
To: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Pre-/Post-Exec scripts with NetBackup 5.1?

Hi!

Whelan, Patrick wrote:
 You could:
 
 bpdbjobs -most_columns | grep backupid | awk -F, '{ print $17 }'

Hm, there's no bpdbjobs on the client :( On the master server,
I find it in  /opt/openv/netbackup/bin/admincmd. And even on
the server, bpdbjobs doesn't print what I need :(

I called the backup policy TEST.  Now I did:

(winds03)askwar$ sudo /opt/openv/netbackup/bin/admincmd/./bpdbjobs 
-most_columns | grep TEST | tail -1
12031,0,3,0,TEST,TestSched,winds06,winds03,1168348027,000190,1168348217,L25_Tape_Drive_winds03_SR,1,,31744,1450,,100,22659,root,0,0,0,0,root,winds03,2,2,0,,,0,0,0,7019,,22662W011L1,1,,,1,0,0,winds06_1168348028,,

(winds03)askwar$ sudo /opt/openv/netbackup/bin/admincmd/./bpdbjobs 
-most_columns | grep TEST | tail -1 | awk -F, '{print $17}'


Hm. Nothing :( And also in the other lines printed by bpdbjobs,
there's never a directory name printed :(

(winds03)askwar$ sudo /opt/openv/netbackup/bin/admincmd/./bpdbjobs 
-most_columns  | awk -F, '{print $17}' | sort | uniq



 Caveat emptor.

Why?

Alexander Skwar
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Symantec ?!Support?!

2007-01-04 Thread Whelan, Patrick
Just my £.02 worth. Unless it is absolutely critical, in which case I will ask 
to be transferred immediately, I send an email from their web site. This does 
many things:

1)   They get my email address right (unless I type it wrong) :-(

2)   They send an automated response that they received your email.

3)   When the engineer responds, you will have his email address.

4)   With an email you can explain technical aspects that the first line 
support wouldn't understand.

5)   You have a written record of when you first contacted them and all 
the subsequent contacts.

 

There are probably more good reasons, but that's just off the top of my head. 
:-)

 

Regards,

 

Patrick Whelan 
NetBackup Specialist 
Architect  Engineering 
+44 20 7863 5243 

Of all the things I've lost, I miss my mind the most! - Unknown 

There are only 10 kinds of people on earth - those who understand binary 
and those who don't. 

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller 

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sixbury, Dan
Sent: 04 January 2007 16:44
To: Martin, Jonathan (Contractor); NetBackup List
Subject: Re: [Veritas-bu] Symantec ?!Support?!

 

I have dealt with numerous vendors and support.  Like all vendors, who you get 
on the other line makes a huge difference as to the type of support you 
receive.  i.e. I actually have received better Red Hat Linux support from HP 
versus directly from Red Hat.  But in that same example I have had both good 
and bad experiences.  Different people have different levels of experience and 
therefore you will receive different support depening on the level of expertise 
you have helping you.

 

So far as support from Symantec / NetBackup, I have had some average support 
and I have had top of the line, really good support. 

 

In regards to having to wait for a call back, it really depends on the 
criticality of your case and the work load of the support engineers.  I have to 
admit that I prefer support setup such that if you have an issue that you can 
get transferred to someone immediately, and that is an option (I believe?) with 
NetBackup if you have severity level 1 issue.  Most of the issues that I have 
that require calling support have a call back within 2 hours and that has been 
acceptable.

 

So far as value for using Symantec (Veritas) for support, it also depends on 
your environment.  I just checked my configuration and we have over 853 clients 
of which 762 are Unique clients that are getting backed up on a regular basis.  
I would never want to support this environment if I didn't have someone like 
Symantec to back me up when I ran into issues.  

 

So far as the email and phone numbers, I have typically gotten verification 
from the support person on the number and email address that is on file to 
verify that it is correct.  Not sure if they don't always verify this, but I 
have typically received verification.

 

Dan

 

 



From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Martin, Jonathan 
(Contractor)
Sent: Thursday, January 04, 2007 10:12 AM
To: NetBackup List
Subject: [Veritas-bu] Symantec ?!Support?!

 

A while back there was a thread going about how good/bad Symantec support is.  
I recently submitted and closed my first case (after solving the issue myself) 
and replied the following to their Technical Support Feedback survey.  We 
didn't have Netbackup support here for many years, and only bought it to 
upgrade to 6.0.  Considering my initial experience I can only hope it gets 
better (although that so far looks unlikely) or I've got a feeling we won't be 
bothering with support in the future.

 

4. You have indicated dissatisfaction with one or more of the case handling 
aspects. Please use the comment field below to provide specific examples. 

 

Where do I start?


1 - When I call I want to talk to a competent technician right away.  Not wait 
8 hours for someone to get back to me.  What's the point of paying for 24x7 
support if I'm not going to talk to someone right away?  Does my 8 hour wait 
continue for 8 hours - 24 hours a day versus a 5x9 contract where I only burn 
9 waiting hours a day?

2 - When I ask to be called back after hours at a specific number I want to be 
called on that number, not my desk because I don't work at 10:00PM.

3 - How many times do I have to tell the phone screener that my company's email 
address standard is not first initial, last name?!  It took me 2 days and 
several calls to get it strait that my email address was [EMAIL PROTECTED] 
mailto:[EMAIL PROTECTED]  NOT [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] .  
I just put in another case and the same mistake was made!

4 - We spent 2 days going back and forth via email to work on COMMON ISSUES 
that had NOTHING TO DO with my problem.  Even after I had solved my own 
problem, I continued sending 

Re: [Veritas-bu] File restore search?

2006-12-18 Thread Whelan, Patrick
What OS are using?

 

You can either use bpflist or from the restore GUI search for a specific file 
name. If you don't know the name of the server, then it gets a little tougher.

 

Patrick Whelan 
NetBackup Specialist 
Architect  Engineering 
+44 20 7863 5243 

Of all the things I've lost, I miss my mind the most! - Unknown 

There are only 10 kinds of people on earth - those who understand binary 
and those who don't. 

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller 

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sixbury, Dan
Sent: 18 December 2006 17:18
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] File restore search?

 

Is there a way to search a list of backups for a specific file name to see if 
it exists on the backups?  i.e. I have a file name, but the person requesting 
the restore can't recall what directory / File System the file was stored in.

Thanks
Dan 



*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Error 41 on one of 7 streams - RESOLUTION

2006-12-12 Thread Whelan, Patrick
I should have thought of it sooner, but it happens so infrequently. There is a 
problem with one of the mount points within the stream that failed. A find 
/ hangs. Since this is basically what NetBackup does, the backup hangs and 
eventually times out. If I had logged in and done the find first I would have 
discovered this and not bothered any of you. However, having bothered you I 
thought I would let you know the solution, lest it should happen to you.

 

BTW, the client is an HP-UX system, which are notorious (at least here) for 
this sort of hang. (No it is not NFS mounted)

 

Regards,

 

Patrick Whelan 
NetBackup Specialist 
Architect  Engineering 
+44 20 7863 5243 

Of all the things I've lost, I miss my mind the most! - Unknown 

There are only 10 kinds of people on earth - those who understand binary 
and those who don't. 

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller 

-Original Message-
From: Bob Stump [mailto:[EMAIL PROTECTED] 
Sent: 12 December 2006 17:08
To: Whelan, Patrick
Subject: Re: [Veritas-bu] Error 41 on one of 7 streams

 

Hi Pat!

 

couple of things to check

How is Busy files setup on client's properties page?

Have you enabled compression?

 

 

 

Bob Stump
Analysts International contracted to:
DIT IS TS Backup and Recovery
7285 Parsons Drive
Lansing, MI  48913

 

Tel:  (517) 636-4076
Fax: (517) 636-0402
Email: [EMAIL PROTECTED]

 Whelan, Patrick [EMAIL PROTECTED] 12/12/2006 5:47 AM 

Environment:

Solaris master server NBU5.1MP5

HP-UX Media Server NBU5.1MP5

Client HP-UX NBU5.1MP4

Has anyone seen a case where seven streams kick off and only one fails with a 
41 Error (network connection timeout)? This is very strange.

Any suggestions appreciated.

Regards,

Patrick Whelan

NetBackup Specialist

Architect  Engineering

+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary

and those who don't.

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 

-- Martin Niemöller



*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege. If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party. 

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] New Media Server

2006-12-07 Thread Whelan, Patrick
I have never actually tried this, but you might try putting a SCRATCH_POOL = 
entry in /usr/openv/volmgr/vm.conf on the new media server.

Regards,

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary
and those who don't.

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Deiter Scott
Sent: 07 December 2006 13:12
To: Veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] New Media Server


 We have installed a new media server with a two drive robot at a remote
site to replace two stand alone drives and the old media server.

We want to setup 4 volume pools including a  scratch pool at the remote
site.
It appears that these pools must be defined at the new media server as I
have not been able to create another scratch pool in our existing
master/media.

Current version is 5.1 mp4
The master/media is solaris
The new media server is solaris
The remote site has window clients.

I'm wondering what else to look for when creating this new setup.




Scott Deiter
System Administrator
Hanover Direct, Inc. 
Hanover, PA 
Voice: 717-633-3298
Fax: 717-633-3101

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] bpversion command

2006-12-07 Thread Whelan, Patrick
Has any used the bpversion command? If so, what does it do and how are the 
parameters used?

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary
and those who don't.

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller



*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] Backup networks

2006-12-01 Thread Whelan, Patrick
Does anyone have a similar setup?
Separate backup network from clients in one location to media servers in same 
location, but the master server can only see the clients and media servers on 
the public network. This causes 41 errors, we have come up with different work 
arounds but all of them are hooey. Is there a clean solution to this dilemma? I 
know the real solution is to have one backup network for everything, but this 
is politically impossible at the moment. Any suggestions welcomed.

Regards,

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary
and those who don't.

... Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller



*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Oracle RMAN backups

2006-11-24 Thread Whelan, Patrick
I was under the impression that RMAN backups were supposed to have INFINITE 
retention and that RMAN took care of expiring the images, there by keeping the 
RMAN catalog in sync with the NetBackup catalog. Otherwise RMAN will think 
there is a good backup, but NetBackup has expired it, if the retention level is 
different than what RMAN expects.

Someone please correct me if I'm wrong.

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary
and those who don't.

Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of mkiles
Sent: 24 November 2006 16:11
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Oracle RMAN backups

Hi All

I am going through the NetBackup for Oracle Admin
guide, it mentions that you can have multiple
schedules in the policy with different retention
periods. That is you can have a FULL backup schedule
with retention period of 1 year and an INCREMENTAL
backup schedule with retention of 1 month.

This may be new in NBU 6, but I remeber in NBU 5.x,
the retention period that was always used was that of
Default-Application-Backup schedule. 

So in my NBU 5.0 environment, I have ONE policy for
FULL Oracle backup with 1 year retention and ONE
Oracle policy for INCREMENTAL backups with 1 month
retention. Each policy has 2 schedules in it, one of
those is Default-Application-Backup schedule, both
schedule have same retntion period, i.e. for FULL
Backup policy retention period for both schedules is 1
year and for INCREMENTAL policy retention period for
both schedules is 1 month.

So my question is, is it the same behaviour in NBU 6.0
for Oracle and SQL backups, or it has changed.

THX


 

Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail beta.
http://new.mail.yahoo.com
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] Patch install for NBU5.1MP5 for HP-UX

2006-11-15 Thread Whelan, Patrick
Title: Patch install for NBU5.1MP5 for HP-UX






Does anybody have the correct install script for HP-UX for NBU5.1MP5? The script that comes with patch works find on Solaris but fails on our HP-UX11.11 media servers.

Thanks in advance for any help.

Regards,

Patrick Whelan

NetBackup Specialist

Architect  Engineering

+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary

and those who don't.

Als sie mich holten,
gab es keinen mehr, der protestieren konnte 

-- Martin Niemöller





*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] exceeded the configured number of tries

2006-11-13 Thread Whelan, Patrick
Title: exceeded the configured number of tries






All,

Environment: 

Clustered Solaris master server 5.8 running NBU 5.1MP4 and 4 HP-UX media servers, also running NBU 5.1MP4. The clients that are failing are windows and UNIX.

I have been getting the above error for over a week now on various clients and policies. In at least one case no clients in a given policy ran. In another case one client from a policy didnt run. If I run the backup manually it works fine. I have searched Google, Veritas and the mailing list archives, but to no avail. 

If anyone has any suggestions they would be greatly appreciated.

Regards,

Patrick Whelan

NetBackup Specialist

Architect  Engineering

+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary

and those who don't.

Als sie mich holten,
gab es keinen mehr, der protestieren konnte 

-- Martin Niemöller





*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Writing perl scripts for performance enhancement inNBU5.1

2006-10-11 Thread Whelan, Patrick

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Raghunath 
kandakur
Sent: 11 October 2006 15:32
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Writing perl scripts for performance enhancement inNBU5.1

Hi all,


I am looking out for help for writing perl scripts for
performance enhancement in Netbackup 5.1 .
Pls advise me..

Thank u all,

Regards
Raghu


__
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

More details please.

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

Als sie mich holten,
gab es keinen mehr, der protestieren konnte 
-- Martin Niemöller


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Multiple-Nics

2006-09-22 Thread Whelan, Patrick









If you dont want to use the GUI,
you can do it from the command line using bpsetconfig (see manual for details).



Regards,





Patrick Whelan 
NetBackup Specialist 
Architect  Engineering 
+44 20 7863 5243 

Of all the things I've lost, I miss my mind the most! - Unknown 

There are only 10 kinds of people on earth - those who understand
binary 
and
those who don't. 



-Original
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]
On Behalf Of Martin,
 Jonathan (Contractor)
Sent: 22 September 2006 14:32
To: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu]
Multiple-Nics



Does anyone know what the
equivalent registry entry is for REQUIRED_INTERFACE for Windows? Or is
this strictlya UNIX/Linux thing?



I've been searching Google and
support.veritas.com all morning now with no luck.



-Jonathan









From: Scott
Jacobson [mailto:[EMAIL PROTECTED] 
Sent: Monday, September 11, 2006
6:21 PM
To: Martin, Jonathan (Contractor);
veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu]
Multiple-Nics



As mentioned from an earlier
thread, I'm not sure of youruse/need for the multiple interfaces.











If some or all these multiple
interfaces are available for teaming or bonding, I would do that, and use the
REQUIRED_INTERFACE for desired data stream (ip addr)











-sj

 Martin, Jonathan (Contractor)
[EMAIL PROTECTED] 9/11/2006 1:42 PM 





Ok... so
three new media servers with 4 nics each are headed my way in the next few
weeks. That's 12 interfaces I've got to worry about! According to
the NBU Performance Planning  Tuning Guide I should create DNS entries for
each interface, and add all interfaces to each server's bp.conf (or registry in
windows.) I'm going to get all these values setup and ready to go before
the hardware even arrives.











backup1 (IP1)







backup1-neta
(IP2)







backup1-netb
(IP3)







backup1-netc
(IP4)









backup2
(IP1)







backup2-neta
(IP2)







backup2-netb
(IP3)







backup2-netc
(IP4)









backup3
(IP1)







backup3-neta
(IP2)







backup3-netb
(IP3)







backup3-netc
(IP4)











So the
servers will all talk to each other across the various nics (by looking up the
server name) but how do clients know which IP to use? Many of those IPs
are going to be on a non-routed backend network, which several
clients will not have access to. How does the Master / Media server know
which nic to use to communicate with the client? Further, how do I tell
my jobs which IP to use?! For example, if I have 6 nics on 3 servers in
the back end will NBU automatically local balance between
them? Perhaps I should enable teaming? Any input on how this done
properly would be appreciated. Unfortunately the HOSTS file lookup method
we use now is unacceptable (and dumb) so I'll have to make this work properly.











-Jonathan











































*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.




___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Client is not validated to use this server

2006-09-15 Thread Whelan, Patrick
Are you restoring from another server? Do you have
/usr/openv/netbackup/db/altnames set up properly, see manual for the way
that is right for your implementation?

Regards,

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary
and those who don't.

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: 15 September 2006 13:10
To: Don Klebba; veritas-bu@mailman.eng.auburn.edu
Cc: [EMAIL PROTECTED]
Subject: Re: [Veritas-bu] Client is not validated to use this server

Hello Don

Check the bprd log to see what name/ip the server is logging in to the
backup 
server with. You may need to raise the verbose level to 5 to get the
wanted 
information.

You will proably need to stop/start netbackup on the backup server, if
you 
didn't already.

Regards
Michael

On Thu, 14 Sep 2006 07:38:00 -0400, Don Klebba wrote
 I have a windows server that I want to have the ability to do 
 restores. When I go into the backup, archieve, restore screen and 
 choose the select for restore button, I get the error, client is not 
 validated to use this server. I've already gone in the host 
 properties of the master server and allowed access to this server to 
 allow both browse and restore. I've recycled the agents on the 
 master after making this change and still get the same message. I'm 
 running Netbackup 5.1 MP4, does anyone have any ideas?
 -- 
 Don KLebba
 Quicken Loans
 Storage Management Team
 [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]
 phone: (734)805-7791
 cell: (734)634-7486
 
 ___
 Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
 http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


--
Cybercity Webhosting (http://www.cybercity.dk)

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Backup through firewalls

2006-09-15 Thread Whelan, Patrick
I have a script that runs bprdreq -rereadconfig 50 times (50 is
completely arbitrary) and so far it has worked every time.

Regards,

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary
and those who don't.

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jeff
Lightner
Sent: 15 September 2006 15:32
To: Paul Keating; veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Backup through firewalls

As I said it worked for me doing the reread.  The documentation says you
have to restart the daemons so I noted it as such.  I didn't try without
the reread so it might have worked as you say.

-Original Message-
From: Paul Keating [mailto:[EMAIL PROTECTED] 
Sent: Friday, September 15, 2006 9:11 AM
To: Jeff Lightner; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Backup through firewalls



-- 


 -Original Message-
 From: [EMAIL PROTECTED] 
 [mailto:[EMAIL PROTECTED] On Behalf 
 Of Jeff Lightner

 Step by step notes I wrote when I did this:
 
 FYI the following is what I did in NetBackup for backing up 
 client in the firewall.  
  Open Netbackup Java GUI 
  Go to Host Properties
  Go to Master Servers
  Double click on the master server.
  In Master Server Properties box go to Client Attributes
  Click Add
  Type in name of client(s) and hit enter to add to list.
  Select (highlight) the client(s) from list
  Under BPCD Connect Back click the VNETD Port radio button
  Click OK.
  Exit and you're done with the GUI.

Was with ya up to here

  After that at command line on the master server run 
bprdreq  -rereadconfig.
(Note - this worked but manual and Datalink indicated 
 bouncing daemons is the only SURE way to do it.
 Datalink said it works sometimes.)

Never had to do any of this.the message that pops up telling you you
need to bounce the daemons can be ingnored in my experienceonce you
turn on the VNETD radio button, or the no connect back check box,
depending on version, click OK, and it works.
No need to bounce anything or re-read any configs IME.

Paul

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Several seperated backup networks..

2006-09-04 Thread Whelan, Patrick
Ok, everybody all at once.

YES

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary
and those who don't.

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Hampus Lind
Sent: 04 September 2006 14:21
To: 'Ed Wilts'
Cc: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Several seperated backup networks..

Hi,

We dont use dns in our backup network. Will that complicate things?

Hampus Lind
Rikspolisstyrelsen
National Police Board
Tel dir: +46 (0)8 - 401 99 43
Tel mob: +46 (0)70 - 217 92 66
E-mail: [EMAIL PROTECTED]


-Ursprungligt meddelande-
Från: Ed Wilts [mailto:[EMAIL PROTECTED] 
Skickat: den 4 september 2006 15:16
Till: Hampus Lind
Kopia: veritas-bu@mailman.eng.auburn.edu
Ämne: Re: [Veritas-bu] Several seperated backup networks..

Hampus Lind wrote:
 Hi all,

 We have one separated backup net at our site which is starting to run 
 out on IP addresses. Our communication folks what to create another new 
 backup network, which means we would have two separated backup networks.
 
 I am not sure how this will work with our master and media servers. 
 Anyone running several backup networks who can explain how this works on 
 the server side?

So long as all of your routes are working properly and your DNS is 
working properly, this won't cause you any grief.  We've got multiple 
networks in place here and it's working fine.

If you're using BMR, then you have to be a bit more concerned but that's 
the only part of NetBackup that I'm aware that cares about what subnet 
you're on.

.../Ed

-- 
Ed Wilts, Mounds View, MN, USA
mailto:[EMAIL PROTECTED]


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] Catalog Archiving

2006-08-31 Thread Whelan, Patrick
Title: Catalog Archiving






All,

Is anyone using Catalog Archiving? If so how is it working for you? I have read the documentation, but it is not clear what the process is if you need to do a restore of files that have archived. Can you enlighten me?

Regards,

Patrick Whelan

NetBackup Specialist

Architect  Engineering

+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary

and those who don't.





*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Client Installs

2006-08-24 Thread Whelan, Patrick
Title: Client Installs









If
you use update_clients from the command line you do not need to add them to a
policy.





Patrick Whelan 
NetBackup Specialist 
Architect  Engineering 
+44 20 7863 5243 

Of all the things I've lost, I miss my mind the most! - Unknown 

There are only 10 kinds of people on earth - those who understand
binary 
and
those who don't. 



-Original
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Hillman, Eric
Sent: 23 August 2006 20:04
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Client
Installs



We use Netbackup 5.0 MP6. The only way to
install the client is to have the client added in a Netbackup Policy prior to
the client installation. Is there any way to override this requirement
and install the client without it first being added to Netbackup? Thanks!

Eric 





*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.





THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY ATTACHMENT MAY BE PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE PROTECTED FROM DISCLOSURE. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this message and any attachment is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and permanently delete it from your computer and destroy any printout thereof.___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] Does anyone know what operating system this is and what, if any, NetBackup version supports it?

2006-08-22 Thread Whelan, Patrick
Title: Does anyone know what operating system this is and what, if any, NetBackup version supports it?






Linux some-server 2.2.19-SMP #1 SMP Thu Oct 25 17:55:16 GMT 2001 i686 unknown

Patrick Whelan

NetBackup Specialist

Architect  Engineering

+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary

and those who don't.





*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] NetBackup 4.5MP6 Linux client - bind question

2006-08-08 Thread Whelan, Patrick
Title: NetBackup 4.5MP6 Linux client - bind question






Does anyone know what the significance of the following error is?:

bind(13782) failed: 98


It happens when running bpcd -standalone


Regards,


Patrick Whelan

NetBackup Specialist

Architect  Engineering

+44 20 7863 5243


Of all the things I've lost, I miss my mind the most! - Unknown


There are only 10 kinds of people on earth - those who understand binary

and those who don't.




*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] LTO2 drives and HP-UX

2006-08-08 Thread Whelan, Patrick
Title: LTO2 drives and HP-UX






NetBackup 5.1MP4

IBM and HP LTO2 drives attached to a HP-UX box. Has anyone done this, successfully?


Regards,


Patrick Whelan

NetBackup Specialist

Architect  Engineering

+44 20 7863 5243


Of all the things I've lost, I miss my mind the most! - Unknown


There are only 10 kinds of people on earth - those who understand binary

and those who don't.




*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] Multiplexing

2006-07-31 Thread Whelan, Patrick
Probably the best reason for not multiplexing is that an un-multiplexed
tape can be read using gnu tar in a worst case scenario.

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary
and those who don't.


-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul
Keating
Sent: 31 July 2006 14:16
To: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Multiplexing


Or at the very least, multiplexed to a lower value than 25.

However, if you are using fast tape and a slow network/clients, the
slowness of the clients will obscure the performance penalty of
multiplexing.

I've done some testing, and got MPX = 10, and saw no performance hit
for backup or restores for 100Mb/s clients.however, with high
performance clients running SAN attached disk and dedicated GigE cards
for backup, I saw significant performance hit between between MPX=2 and
MPX=3...the difference between MPX=2 and no multiplexing was negligable.

Paul

-- 


 -Original Message-
 From: [EMAIL PROTECTED] 
 [mailto:[EMAIL PROTECTED] On Behalf 
 Of Liddle, Stuart
 Sent: July 31, 2006 2:59 AM
 To: WEAVER, Simon; 'Mansell, Richard'; 
 veritas-bu@mailman.eng.auburn.edu
 Subject: Re: [Veritas-bu] Multiplexing
 
 
 Simon,
 
 Finebelieve what you wantbut the numbers don't lie.  
 
 If you ever try any testing of this you will see that  restores are
 significantly faster when you do them from non-multiplexed tapes.
 
 --stuart
 


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] HCART tapes with LTO2 Drives

2006-07-17 Thread Whelan, Patrick
Title: HCART tapes with LTO2 Drives






Does anyone know if HCART tapes will be used by LTO2 drives defined as HCART2 drives? We have just replace all our LTOI drives with LTOII which can read and write LTOI tapes, but do they have to be moved to HCART2, or will it work auto magically? Also, can a tape be moved from HCART to HCART2 if it is assigned? Im hoping someone has already gone through process and can be of assistance. TIA.

Regards,

Patrick Whelan

NetBackup Specialist

Architect  Engineering

+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary

and those who don't.





*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] Updating UNIX clients from the master server.

2006-07-17 Thread Whelan, Patrick
Title: Updating UNIX clients from the master server.






All,

One more question. Is anyone aware of a problem updating UNIX clients running Oracle 8 from the master server? I have been told that Oracle holds some of the lib files open so the update can not succeed. Is this true?

Regards,


Patrick Whelan

NetBackup Specialist

Architect  Engineering

+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

There are only 10 kinds of people on earth - those who understand binary

and those who don't.





*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] vmoprcmd -shmdrive

2006-06-15 Thread Whelan, Patrick
Title: vmoprcmd -shmdrive






Does anyone have the fields for the above command? It looks like it could be very useful if I could figure out what fields are what.

Regards,

Patrick Whelan

NetBackup Specialist

Architect  Engineering

+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown





*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


Re: [Veritas-bu] whats wrong with my calendar basedbackupschedule.bppllist included.

2006-06-13 Thread Whelan, Patrick








You could always set the time on the
master server ahead, so midnight matches your normal start time. J



Regards,





Patrick Whelan 
NetBackup Specialist 
Architect  Engineering 
+44 20 7863 5243 

Of all the things I've lost, I miss my mind the most! - Unknown 



-Original
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bob Stump
Sent: 13 June 2006 17:21
To: Jonathan - Fort Collins CO
Marks; veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] whats
wrong with my calendar basedbackupschedule.bppllist included.





goofy isn't the word I was thinking
ofbad prcatice to do backups from 6PM to 6AM











anyhow. I should have included that
I am using NB5.1_MP4

























 Marks, Jonathan - Fort Collins, CO
[EMAIL PROTECTED] 6/13/2006 12:02 PM 





If
you are using Netbackup 6.0 you can not have your start window cross
midnight. I was told that it is bad practice. I think Netbackup has
gone goofy.









-Jonathan Marks (970)295-5362















From: Bob Stump [mailto:[EMAIL PROTECTED] 
Sent: Monday, June 12, 2006 4:02
PM
To:
veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] whats wrong
with my calendar based backup schedule.bppllist included.



I have
years of experience with frequency based scheduling but I have always shied
away from calendar based. Today I made my first attempt and I cannot see where
I made a mistake. Please review this and help me if you can. Thanks.

















Here
is the problem
The calendar based backup started on the first day that I made this policy
active even though it is not suppose to be active until the last Monday of the
month.











Here
is the strategy
1. full backup every monday night excluding last monday of the month with 1 month
retention
 allow tuesday full for any failures that may occur on monday
3. last monday of each month run a calendar full backup with 3 month retention
 retries allowed after runday which would be tuesday night.
2. incremental backup every night except monday nights with 1 month retention











Here
is the bppllist:
Policy Name: groupwise01-09












Policy Type: Standard

Active:
yes
 Effective date: 06/12/2006 08:00:00
 Client Compress: no
 Follow NFS Mounts: no
 Cross Mount Points: no
 Collect TIR info: no
 Block Incremental: no
 Mult. Data Streams: yes
 Client Encrypt: no
 Checkpoint: no
 Policy Priority: 25
 Max Jobs/Policy: Unlimited
 Disaster Recovery: 0
 Residence:
dssu_grp
 Volume Pool: Novell

Keyword:
(none specified)












HW/OS/Client: Novell
NetWare gw01

Novell
NetWare gw02

Novell
NetWare gw03

Novell
NetWare gw04

Novell
NetWare gw05

Novell
NetWare gw06

Novell
NetWare gw07

Novell
NetWare gw08

Novell
NetWare gw09












Include: /FS












Schedule:
17.30_mon_calendar

Type: Full
Backup
 Maximum MPX: 10
 Synthetic: 0
 PFI Recovery: 0
 Retention Level: 5 (3 months)
 Number Copies: 1
 Fail on Error: 0
 Residence: dssu04
 Volume Pool: (same as policy volume
pool)
 Calendar sched: Enabled
 Allowed to retry after run day
 SPECIFIC DATE 0 - 06/26/2006
 SPECIFIC DATE 1 - 07/31/2006
 SPECIFIC DATE 2 - 08/28/2006
 SPECIFIC DATE 3 - 09/25/2006
 SPECIFIC DATE 4 - 10/30/2006
 SPECIFIC DATE 5 - 11/27/2006
 SPECIFIC DATE 6 - 12/25/2006
 Monday, Week 5
 Daily Windows:

Monday 18:30:00 --
Tuesday 04:00:00
 Tuesday
17:30:00 -- Wednesday 04:00:00












Schedule: 17.30_mon_full

Type: Full
Backup
 Frequency: every 5 days
 Maximum MPX: 10
 Synthetic: 0
 PFI Recovery: 0
 Retention Level: 3 (1 month)
 Number Copies: 1
 Fail on Error: 0
 Residence: dssu04
 Volume Pool: (same as policy volume
pool)
 EXCLUDE DATE 0 - 06/26/2006
 EXCLUDE DATE 1 - 07/31/2006
 EXCLUDE DATE 2 - 08/28/2006
 EXCLUDE DATE 3 - 09/25/2006
 EXCLUDE DATE 4 - 10/30/2006
 EXCLUDE DATE 5 - 11/27/2006
 EXCLUDE DATE 6 - 12/25/2006
 Daily Windows:

Monday 17:20:00 --
Tuesday 04:00:00

Tuesday 17:30:00 -- Wednesday 04:00:00












Schedule: 17.30_mon_inc

Type:
Differential Incremental Backup
 Frequency: every 12
hours
 Maximum MPX: 10
 Synthetic: 0
 PFI Recovery: 0
 Retention Level: 3 (1 month)
 Number Copies: 1
 Fail on Error: 0
 Residence: (specific
storage unit not required)
 Volume Pool: (same as policy volume
pool)
 Daily Windows:

Sunday 17:30:00 --
Monday 04:00:00

Tuesday 17:30:00 -- Wednesday 04:00:00
 Wednesday 17:30:00
-- Thursday 04:00:00
 Thursday
17:30:00 -- Friday 04:00:00

Friday 17:30:00 -- Saturday
04:00:00
 Saturday
17:30:00 -- Sunday 04:00:00









*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the 

Re: [Veritas-bu] Exclude Lists on Linux - Again!!!

2006-06-02 Thread Whelan, Patrick
If you want to exclude the entire directory you need to end the line
with a / for example u02/oradata/bnrbuild/. At least that's what a quick
glance at the manual implied (or I inferred) :)

Regards,

Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Brooks,
Jason
Sent: 02 June 2006 13:30
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Exclude Lists on Linux - Again!!!

Yesterday, I was trying to get a BMR image of one of our Linux Oracle
servers.  Currently, we are doing nightly database backups to disk via
RMAN, and then NBU backs up the system, including the db backup.  All
backups are done while the databases are live, so I have to exclude
several directories.  Here is the contents of the exclude_list on that
server:

/u02/oradata/BANTEST
/u02/oradata/bnrbuild
/u02/oradata/bnrcnvt1
/u02/oradata/jwetmpdb
/u02/oradata/lumtest
/u02/oradata/PPRD
/u02/oradata/SEED
/u02/oradata/TRNG
/u01/oradata/*
/u03/oradata

On the backup, I received the following errors:

6/1/2006 4:33:27 PM - begin writing
6/1/2006 4:36:06 PM - Error bpbrm(pid=13760) from client server1: ERR -
Modification time has changed while backing up
/u02/oradata/bnrbuild/undotbs_bnrbuild_01.dbf.
6/1/2006 4:51:15 PM - begin writing
6/1/2006 5:06:39 PM - begin writing
6/1/2006 5:09:17 PM - Error bpbrm(pid=13760) from client server1: ERR -
Modification time has changed while backing up
/u03/oradata/bnrbuild/ctrl_bnrbuild_03.ctl.
6/1/2006 5:18:31 PM - end writing; write time: 00:11:52
the requested operation was partially successful(1)

I would think both of these would be covered under the
/u02/oradata/bnrbuild exclude list item.  Am I wrong?  Suggestions?



Thanks,
Jason

Jason Brooks
Computer Systems Engineer
IITS - Longwood University
voice - (434) 395-2916
fax - (434) 395-2035
mailto:[EMAIL PROTECTED] 

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] Searching mailing list

2006-06-02 Thread Whelan, Patrick
Title: Searching mailing list






All,

It has been too long and/or I am getting too old J, how do I search the mailing list for previous questions and answers?

Failing that, or in addition to, does anyone know the meaning of the following message generated by bpimmage spangroups?

could not find previously added media id (003115), aborting command

unable to process request

Regards,

Patrick Whelan

NetBackup Specialist

Architect  Engineering

+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown





*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] bpcoverage HELP!

2006-05-12 Thread Whelan, Patrick
Title: bpcoverage HELP!






In an earlier email I mentioned a problem with bpcoverage after I had fixed bpcoverage to work (NBU 5.1MP4 Solaris). Because some of the clients can only be seen by one client I had to run bpcoverage on that client and guess what! The fix for bcoverage on the master server didnt work on the HP-UX media servers even allowing for different lib locations etc. Does anyone know how to fix bpcoverage for NBU 5.1MP4 on HP-UX? Does MP5 fix it? 

Thanks,

Patrick Whelan

NetBackup Specialist

Architect  Engineering

+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown





*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.




RE: [Veritas-bu] bpstart_notify

2006-05-10 Thread Whelan, Patrick








I think you need to put it in
session_start_notify.bat instead.





Patrick Whelan 
NetBackup Specialist 
Architect  Engineering 
+44 20 7863 5243 

Of all the things I've lost, I miss my mind the most! - Unknown 



-Original
Message-
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: 10 May 2006 13:30
To:
veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu]
bpstart_notify




All 

I
have inherited a windows 2003 netbackup 5.1 mp4 master server. 
I
want to automate the robot inventory. 
I
have a bpstart_notify.Windows2003_Backup.bat file in the netbackup bin folder.

It
runs quite happily, unfortunately it does not wait for the inventory to finish.

Therefore
all my backups fail error 96, but rerun quite happily. 

How
do I make the .bat file wait for the inventory to complete. 
I
have tried sleep n and start /wait but they both do nothing.


Regards
Mark Goodchild
Branches Remediation J.P.Morgan Chase
Phone: 01202347149
Mail: Mark A Goodchild/[EMAIL PROTECTED]
E-Mail: [EMAIL PROTECTED]





*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.






RE: [Veritas-bu] Export and Import NetBackup configuration

2006-05-10 Thread Whelan, Patrick
Am I misinterpreting the original post?

According to the manual, using bprecover with the -dhost option is
supposed to allow recovery of the database to an alternate host. This is
a snippet from the command manual.

bprecover
-dhost destination_host
Specifies the host to which the selected catalog is restored. Normally,
catalogs are restored to the host where the data originated (as
displayed
with the -l option). The -d option makes it possible to restore the
catalog to another host.

Caution Use the dhost option with EXTREME caution, since it can
overwrite existing
catalogs on the destination host. To permit recovery in case you
unintentionally
overwrite the wrong catalogs, you can move existing catalogs to a
temporary
directory on the destination host.
The following NetBackup client software must be installed on the
destination host:
/usr/openv/netbackup/bin/bpcd
and
/usr/openv/netbackup/bin/tar
Note Do not specify -r all (or ALL) with -dhost when using this command.
Either
explicitly specify an image (for example, -r 2) or use the interactive
mode (-r).


Patrick Whelan
NetBackup Specialist
Architect  Engineering
+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown



*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


[Veritas-bu] Media Manager error 44

2006-05-09 Thread Whelan, Patrick
Title: Media Manager error 44






Has anybody seen an error 44 from media manager when trying to use the configure storage device configuration wizard? I have tried this on all 5 libraries (separately and together) with the same results. Although these drives are not SSOd I would expect the wizard to find the drives. Any ideas would be appreciated.

Regards,


Patrick Whelan

NetBackup Specialist

Architect  Engineering

+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown





*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.




[Veritas-bu] bpclntcmd

2006-04-25 Thread Whelan, Patrick
Title: bpclntcmd






Does anyone have any idea why:

Bpclntcmd hn master_server_name (works)

Bpclntcmd ip master_server_ip_address (works)

But

Bpclntcmd pn (doesnt work)

This is driving me crazy. Naturally the backups fail.

Regards,

Patrick Whelan

NetBackup Specialist

Architect  Engineering

+44 20 7863 5243

Of all the things I've lost, I miss my mind the most! - Unknown





*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.




RE: [Veritas-bu] Remotely Finding Version _AND_ patch level

2006-04-23 Thread Whelan, Patrick
Oops, sent it to the wrong person. ;)

You could try playing with this script to see if it helps any. It only
works for Windoze boxes, running from a unix media/master server, but
could be adapted to unix or other. Let me know if it helps any.

 Cut here get_version ##
#!/usr/bin/ksh

# Make sure there is a client specified
if [ $# -ne 1 ]
then
echo usage:
$0 client_name
exit 1
fi

# Try to generate the client list only once. Sometime it can take a long
time
if [ ! -f /tmp/client.list ]
then
bpplclients -allunique -noheader  /tmp/client.list
fi

client=$1

grep -w $client /tmp/client.list | tail -1 | read HW OS CLIENT

# If CLIENT is empty, then the client is known to NetBackup
if [ -z $CLIENT ]
then
echo Client $client not found
exit 2
fi

ext=
typeset -l os=${OS%%s*}
if [ ${os} == window ]
then
DIR=
else
echo This script is only for Windows clients
exit 3
fi

integer found=-39

bpdir -M $client /$DIR | \
   grep -i dir | \
awk '{ print $NF }'| \
while read DIR
do
found=$( bpdir -M $client /$DIR | \
egrep -ic veritas )
if [ found -gt 0 ]
then
ffound=$(bpdir -M $client /$DIR/veritas/netbackup | \
grep -c version.txt )
bpgp from $client \
/$DIR/veritas/netbackup/version.txt \
/tmp/$client.txt
cat /tmp/$client.txt
exit

fi
done

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mansell,
Richard
Sent: 23 April 2006 21:49
To: veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Remotely Finding Version _AND_ patch level



 FWIW, the Windows admin console in 6.0 reports the client version for
Windows clients. We are only running 6.0 at the moment so I don't know
if it will report the version for pre-6 clients.

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Sean
Clarke
Sent: Sunday, 23 April 2006 8:51 pm
To: Sean Clarke; veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Remotely Finding Version _AND_ patch level

Ed Wilts wrote:
 On Wed, Apr 19, 2006 at 11:42:10PM +0100, Sean Clarke wrote:
 
 consistent way to get the versions across all clients.
 
 .../Ed
 

I'll go to my corner and cry now ;-)

Guess I'll report on the UNIX boxes (which seem to play OK with
bpcoverage and just report the major version number for windows boxes.


Very annoying as to the untrained eye it would seem to be easy to ensure

that this worked :-(

Thanks for the replies anyway

Sean
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


**
This electronic email and any files transmitted with it are intended 
solely for the use of the individual or entity to whom they are
addressed. 

The views expressed in this message are those of the individual 
sender and may not necessarily reflect the views of the Christchurch
City Council.

If you are not the correct recipient of this email please advise the
sender and delete.

Christchurch City Council
http://www.ccc.govt.nz
**


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


RE: [Veritas-bu] Hardware compression not working

2006-04-18 Thread Whelan, Patrick
Title: Message









What is the indication that it is not
compressing? Is it the same data as the test system?





Patrick Whelan 
NetBackup Specialist 
Architect  Engineering 
+44 20 7863 5243 

Of all the things I've lost, I miss my mind the most! - Unknown 



-Original
Message-
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of WEAVER, Simon
Sent: 18 April 2006 10:04
To: 'Carlisle, D Renee';
veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Hardware
compression not working





Although the spec is the same, do any of the
netbackup logs show why compression may not be running?















Regards

Simon Weaver
3rd
Line Technical Support
Windows Domain
Administrator 

EADS
Astrium Limited, B32AA IM (DCS)
Anchorage Road, Portsmouth, PO3 5PU

Email: [EMAIL PROTECTED]



-Original Message-
From: Carlisle, D Renee
[mailto:[EMAIL PROTECTED] 
Sent: 17 April 2006 20:22
To:
veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Hardware
compression not working

Tape Library: IBM 3584
partitioned into production and test environment

Operating System: 
Solaris 9, Windows 2003, HP-UX 11i

Netbackup: 5.1 mp3



Just upgraded from STK
L700E LTO-1 library to a IBM 3584 LTO-2 library

All of a sudden tape
compression is not working on any flavor media server, but only in production.
Our test environment is compressing data at a hardware level just fine.  Same
OS, same NBU release, same Tape library, same tape drive drivers, same HBA
cards, same firmware, same st.conf file on the Sun systems.


Can anyone think of what we might be missing that would cause the production
environment not to be using hardware compression while the test environment is?















Reneé Carlisle 
Sr. Systems Administrator
675 Basket Road
Webster, NY 14580




Jer
29:11-13














The information contained in this
message may be privileged,
confidential, and protected from
disclosure. If the reader of this
message is not the intended recipient,
or any employee or agent
responsible for delivering this message
to the intended recipient,
you are hereby notified that any
dissemination, distribution, or
copying of this communication is
strictly prohibited. If you have
received this communication in error,
please notify us immediately
by replying to the message and deleting
it from your computer.

Thank you. Paychex, Inc.







*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.




This email is for the intended addressee only.
If you have received it in error then you must not use, retain, disseminate or otherwise deal with it.
Please notify the sender by return email.
The views of the author may not necessarily constitute the views of EADS Astrium Limited.
Nothing in this email shall bind EADS Astrium Limited in any contract or obligation.

EADS Astrium Limited, Registered in England and Wales No. 2449259
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England


RE: [Veritas-bu] Database backup scheduling with different retentions

2006-01-19 Thread Whelan, Patrick
In researching some answers to the original post I was reminded that
most Oracle backups use an infinite retention level with RMAN managing
the actual retention level. Does this ring any bells for anyone else, or
am I getting senile in my old age.

Regards,

Patrick Whelan
NetBackup Specialist
Architect  Engineering

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: 19 January 2006 17:09
To: [EMAIL PROTECTED]; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Database backup scheduling with different
retentions

I can answer for Oracle - I assume that the MSSQL would be similar.

When your RMAN script runs, it sends data to the Netbackup Oracle agent.
The agent, in turn, sends the data onto a Netbackup media server, to a
particular policy  schedule.  In the RMAN script, you can specify the
NB_ORA_POLICY and NB_ORA_SCHEDULE variables.  These variables select
which
Netbackup (Oracle-type) policy  schedule are used to recieve the data.

Netbackup's retention of the data, therefore, is the retention period
set on
these application backup schedules.  At the end of the retention
period,
therefore, NB will discard the images.  If you want three different
retentions, create three different schedules (it can be in the same
policy).
Have RMAN set the schedule variable appropriate to the type of retention
you
wish to select.

This has nothing to do with retention periods set by RMAN within the
RMAN
scripts.  RMAN can say keep this for a year and what it really is
doing is
keeping its info on those data blocks for  a year.  If it tries to
restore
an old image, it's going to request specific backup pieces from
Netbackup.
If NB's scheduled retention is less than RMAN's retention, there's a
risk
that RMAN will get a failure from NB - the images will no longer be in
NB's
image set.

There's two ways to deal with this:

1. Set NB's retention to be the same (or more) than RMAN's retention
periods.
2. Frequently sync RMAN's catalog against NB's catalog so RMAN stays
current
with NB's actual retained data.  This is the most accurate but more
complex.
Here's a technote to get you started:
http://seer.support.veritas.com/docs/251686.htm

HTH - M

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Austin
Murphy
Sent: Thursday, January 19, 2006 8:23 AM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Database backup scheduling with different
retentions


Does anyone have any insight on how to do scheduled
weekly/monthly/yearly backups (with commensurate retention periods) of
an MSSQL or Oracle database with Netbackup?

I am running 5.1 MP3 on Solaris 9 and just found out that the database
policy schedules don't work the same way as the file policy schedules.

It has been pointed out to me that I could setup 3 Policies for
weekly/monthly/yearly backups, but this won't stop the weekly when a
monthly runs.  Nor will the monthly (or weekly) be suspended when the
yearly is run.

If anyone has any ideas I'd be grateful to hear them.  Thanks.

Austin Murphy

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


RE: [Veritas-bu] exclude list on Linux client

2006-01-12 Thread Whelan, Patrick
Title: Message









Omit the three mount points from the
policy and put them in an include_list on util1.



Regards,





Patrick Whelan 
NetBackup Specialist 
Architect  Engineering 



-Original
Message-
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Pillapalem, Smitha
Sent: 12 January 2006 14:41
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] exclude list
on Linux client





Any
suggestions please?





-Original Message-
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]On Behalf Of Pillapalem, Smitha
Sent: Tuesday, January 10, 2006
5:01 PM
To: veritas-bu@mailman.eng.auburn.edu
Cc: Pillapalem, Smitha
Subject: [Veritas-bu] exclude list
on Linux client



Hi all,





I'm on
NB 5.1 - I have 2 Linux clients(util1 and util2 )under a policy and with
the following filelist





/export





/root





/home





/etc





/var





/u/d01





/usr





/lib





All I
need is to exclude /u/d01 , /usr and /lib from one of the clients (util2) - I
created a exclude list on util2 as follows -





[EMAIL PROTECTED]
netbackup]# cat exclude_list
/usr
/lib
/u/d01
But NB still is backing up the above 3 dir's on util2 - Any idea y?





Thanks
in advance..





Smitha









*
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also be subject to legal privilege.  If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.






RE: [Veritas-bu] EXCLUDE LIST QUESTION

2006-01-10 Thread Whelan, Patrick
bpplexclude -help

Patrick Whelan
NetBackup Specialist
Architect  Engineering

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Leandrine,
Anderson Henrique
Sent: 10 January 2006 12:02
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] EXCLUDE LIST QUESTION

Hello All,

How can I do a exclude list through command line at Unix System?

We have a 120 Windows clients and we'd like to create a Shell Script to
do this.

Thanks,

Anderson Leandrine
Siemens Ltda
Siemens Business Services
SBS ITO ORS NOC
Tel.: +55 11 3908 5690
E-mail:  [EMAIL PROTECTED]

Siemens Brasil 2005 * 100 ANOS

___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


*
The message is intended for the named addressee only and may not be disclosed 
to or used by anyone else, nor may it be copied in any way. 

The contents of this message and its attachments are confidential and may also 
be subject to legal privilege.  If you are not the named addressee and/or have 
received this message in error, please advise us by e-mailing [EMAIL PROTECTED] 
and delete the message and any attachments without retaining any copies. 

Internet communications are not secure and COLT does not accept responsibility 
for this message, its contents nor responsibility for any viruses. 

No contracts can be created or varied on behalf of COLT Telecommunications, its 
subsidiaries or affiliates (COLT) and any other party by email Communications 
unless expressly agreed in writing with such other party.  

Please note that incoming emails will be automatically scanned to eliminate 
potential viruses and unsolicited promotional emails. For more information 
refer to www.colt.net or contact us on +44(0)20 7390 3900.


___
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


  1   2   >