All,
Linux OS, NetBackup 7.1.0.4, NDMP
I am running into backup issues with NDMP (NetApp filer). We have over 10
million files and several paths to backup. What is happening is the smaller
paths backup fine but once the larger path starts and NetBackup tries to get
the file list it times
backups. And I tried sending it to disk and tape,
still the same issue.
-Kevin
From: Len Boyle [mailto:len.bo...@sas.com]
Sent: Monday, August 27, 2012 10:55 AM
To: Baumann, Kevin; veritas-bu@mailman.eng.auburn.edu
Subject: RE: NDMP backup problems
Do you have the netbackup ndmp debug logs
All,
I just started looking into backing up our VM's with Netbackup. I have a
couple of questions though.
- Should I look at Symantec's solution? Is there something better out there
(VEEM?)
- I will need to do single file restores, not just system restores, can
Symantec handle that with an
Issue resolved.
The problem ended up being the NetApp that I was restoring to. The setup was
not correct, there was not enough space allocated (by about 1 MB). Increased
the volume on the NetApp and restore worked.
Thanks for the help.
From: Baumann, Kevin [mailto:kbaum...@akamai.com]
Sent
All,
I am running into an NDMP restore issue on one of my servers.
I have backed up from a NetApp in Boston and I want to restore it to a NetApp
in Dallas. The tapes have been imported and everything is in the catalog on
the master server where the restore will be done. The NetApp version is
: Thursday, November 18, 2010 11:27 AM
To: Baumann, Kevin
Cc: VERITAS-BU@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] NDMP restore issue
I have seen something like this when I hadn't created the volume on the other
netapp controller doing a alternate client(filer) restore
Think that /etc/messages
All,
I have been seeing some odd behavior in my backup environment - OS
Linux, NB Version 6.5.5, IBM 3584 tape library.
I have a master server with 6 media servers and media is getting frozen
fairly often. I can unfreeze it and it will be used and have no
problems, but then another
To: Baumann, Kevin; VERITAS-BU@mailman.eng.auburn.edu
Subject: RE: Odd issues
Hello Kevin,
Which model of tape drives are you using?
Which model of tape carts are you using?
How old are the tape drives?
How old are the tape carts?
What messages are you seeing in bptm for the tape? You might
All,
I am trying to run NDMP backups with certain paths and I am getting
error 99 in the GUI, and the error ndmp_data_start_backup failed, status
= 9 (NDMP_ILLEGAL_ARGS_ERR).
The policy is setup as follows:
Backup Selections:
NEW_STREAM
/vol/vol2/data/[A-M]*
NEW_STREAM
Thanks Jonathan. That is fantastic news…
Anyone know if that will change or has changed with version 7?
From: Jonathan Dyck [mailto:jd...@bank-banque-canada.ca]
Sent: Tuesday, April 06, 2010 1:34 PM
To: Baumann, Kevin; VERITAS-BU@MAILMAN.ENG.AUBURN.EDU
Subject: RE: [Veritas-bu] NDMP
, 2009 2:11 PM
To: Baumann, Kevin
Cc: VERITAS-BU@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] bpadm error
On Thu, 18 Jun 2009, Baumann, Kevin wrote:
What happens if you run:
$ /usr/openv/netbackup/bin/admincmd/bppolicynew test
$
# /usr/openv/netbackup/bin/admincmd/bppolicynew test
All,
I am trying to setup some policies on a remote master server via bpadm and I
keep getting this error when I choose (p) Policy Management...
Unable to get Class_att_defs file. Error: cannot connect on socket (25)
Anyone see this before?
Thanks,
-Kevin
What happens if you run:
$ /usr/openv/netbackup/bin/admincmd/bppolicynew test
$
# /usr/openv/netbackup/bin/admincmd/bppolicynew test
cannot connect on socket
Is your master working?
bpps -a output?
# bpps -a
NB Processes
/usr/openv/netbackup/bin/nbsl
Thanks for the info Ed, and for the tip.
From: Ed Wilts [mailto:ewi...@ewilts.org]
Sent: Monday, May 11, 2009 12:28 PM
To: Baumann, Kevin
Cc: VERITAS-BU@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Flash Backup
On Mon, May 11, 2009 at 11:12 AM, Baumann, Kevin kbaum...@akamai.com wrote
All,
I am trying to write a script that will eject tapes and I am using the
following command:
vmchange -res -multi_eject -rn 0 -rt TLD -rh robot_control_host -ml mediaID
This works fine the first time, but the robot no longer works and I need to
restart Netbackup for the robot to do
All,
Is there a way to find out how many tapes that I have used in the past 15 days?
I don't need to know what is on the tapes, just if they have been written to
or not.
Any help will be greatly appreciated!
Thanks in advance.
-Kevin
Found a way:
bpimagelist -media -d 03/03/2009
From: Baumann, Kevin [mailto:kbaum...@akamai.com]
Sent: Wednesday, March 18, 2009 3:45 PM
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: [Veritas-bu] Tape usage for last 15 days
All,
Is there a way to find out how many tapes that I
The same holds true for 6.5.3 (though I have not done this yet).
-Original Message-
From: Scott Jacobson [mailto:[EMAIL PROTECTED]
Sent: Thursday, December 04, 2008 6:38 PM
To: nbu
Subject: [Veritas-bu] NBU 6.5GA to 6.5.2A
From 6.5 GA is there the need to go to 6.5.1 or 6.5.1A before
All,
I have a falcon attached to my media server and I want to use it for
disk storage. After configuring it and trying to run a backup to that
storage unit, I am getting an error 800.
Error nbjm NBU status: 800, EMM status: Disk volume is down resource
request failed (800)
Has anyone
All,
Is there a way to limit bandwidth? I have a master server that is down
and I want to backup a unix client over the WAN. But, I would like to
limit that to 2 MB/sec.
Thanks in advance.
___
Veritas-bu maillist -
All,
Using the GUI, I am trying to view the port ranges of a client on a
remote 6.5 master server (from Boston to San Fran). It is VERY slow,
and when I go from Netbackup Management -- Host Properties -- Clients
I get an hourglass that does nothing...it hangs.
I am wondering if I there is a
Check out the 6.5 Troubleshooting guide, around page 591.
http://seer.entsupport.symantec.com/docs/290230.htm
Hope that helps.
-Kevin
From: Hillman, Eric [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 17, 2008 11:12 AM
To: veritas-bu@mailman.eng.auburn.edu
Subject:
I would love to see that script!
Thanks!
-Kevin
-Original Message-
From: schmaustech [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 31, 2008 3:59 PM
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: [Veritas-bu] Bpschedreq in 6.5
I wrote a Perl scriot that allows you to determine which
Is there a command that shows me what drives are being used and the
kilobytes being written? I can see it via the GUI, but I want to have
it via command line.
Thanks.
-Kevin
___
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
All,
When I use the GUI for client backups from Jan 1st until now, I get a
complete list. Is there a command to get that same information from the
command line?
thx.
___
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
All,
When I try and start the activity monitor on my Windows XP machine I get
an error:
Activity monitor failed and must be restarted.
To recover, first correct the problem described below and click Refresh.
cannot connect on socket.
And when I run jnbSA from my SUSE linux box I get:
#
The problem has been resolved, thanks for the help.
What happened is someone updated some kernel drivers that broke X11 and
xterm. Once that was rolled back, it all worked like it should.
-Kevin
From: Baumann, Kevin [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 28, 2008 10:17 AM
Does anyone know if Ubuntu is going to be supported in Netbackup 6.5? I
did find a compatibility matrix, but that was just for 6 and it was a
while ago.
Thanks.
-Kevin
___
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
All,
I have 3 tapes that are giving me trouble when I try to import them, on
phase 1. I have run a vmquery -deassignbyid on each one and I am trying
to import them. The error message I get is:
Import phase 1 started Fri May 16 2008 14:52:27
14:52:27 INF - Create DB information for media
I wasn't going to chime in but...
I work with both Unix and Windows and they both have benefits/drawbacks.
This debate can go on and on, but can we please take it off line, or at
least stop sending to this list?
Thanks.
-Kevin
From: Peacock Dennis - dpeaco [mailto:[EMAIL
I would like to track the performance of my tape drives to see what the
throughput is. I am running Netbackup 5.1 for Linux (Suse) with 12 LTO3
drives and I want to make sure I am using them to the max. I backup
around 40TB/day, and all the drives are used constantly, but I want to
look for
I'm not 100% sure, but I was always told no, you cannot change the IP.
Maybe someone else can help, sorry.
-Kevin
-Original Message-
From: Jerry Rioux [mailto:[EMAIL PROTECTED]
Sent: Wednesday, April 23, 2008 8:23 AM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Ip change
Hi all,
I am new to this list, so forgive me if I post with any etiquette
errors.
I am getting several 219 (storage unit not available) errors on my NDMP
policy. I have recently added a tape drive to that pool and that is
when the errors started.
I have it configured the same way the
33 matches
Mail list logo