Ok I have a situation which I need have the correct syntax for the
set_NDMP_attr command. When you run this command to authorize your media
server to access a netapp filer is stores this info in a file on the
media server. Where is this file located? And can it be edited manually?
We have a bad
Ok we figured it out and were able to delete the bad entry. Sorry but
thanks
Greg
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Hindle,
Greg
Sent: Tuesday, July 10, 2007 9:45 AM
To: NB List Mail
Subject: [Veritas-bu] using set_ndmp_attr
Ok I
How does everyone track this? Do you count just total successfully
backups vs. the number of attempts? And how do you handle a backup that
failed 3 times but ran good on the forth?
Greg
This e-mail and any attachments are confidential, may contain legal,
professional or other privileged
: rcarlisle [mailto:[EMAIL PROTECTED]
Sent: Monday, June 04, 2007 9:46 AM
To: Hindle, Greg; 'NB List Mail'
Subject: RE: [Veritas-bu] calculating backup success rate
Greg,
Great questions. I would say that it depends on the audience. Any reporting
tool on the market for NBU today can give you
From: rcarlisle [mailto:[EMAIL PROTECTED]
Sent: Monday, June 04, 2007 10:28 AM
To: Hindle, Greg; 'NB List Mail'
Subject: RE: [Veritas-bu] calculating backup success rate
Greg,
Vision is Symantec's big user conference. It is coming up next week in Las
Vegas. It is definitely worth
Yes use set_ndmp_attr -auth filername id password
Greg
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Martin,
Jonathan
Sent: Tuesday, May 08, 2007 1:43 PM
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: [Veritas-bu] NDMP Username
I'm setting up this
Here is the procedure we use...
** Warning this procedure will delete and destroy all images on the
tape. Do this only if the need is there. It is recommended that you
allow netbackup to naturally scratch the tape first before removing it
from netbackup. This procedure assumes that you want to
nb 5.0 mp7 Solaris 9
does anyone have a script that scans the logs for tapes that are getting
read / write errors? I had a bunch of drives go offline the other night
and it could be due to a bad tape or tapes and was wondering if anyone
had a script that they run to scan for this condition.
We also use NDMP in this manner. We have found that some volumes on the
NAS backup slower than others. We are still looking into the issue but
our issues is these volume are snap mirrored and for exchange and these
backup twice as slow as the regular volumes we have. Check to see if
these are snap
PROTECTED]
Sent: Monday, April 23, 2007 10:17 AM
To: Hindle, Greg; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] NDMP backups very slow
Hi
There 3020 configured for NDMP backups has three vols they are as
follows -
/vol/exch_vs1 - this is snapvalt volume on a 3020 filer snap
We only use 1 stream for NDMP. Since these are typically large
files/volumes to begin with we wanted the restore process to be short.
So we deiced to turn off streams. However, we are moving to 6.0 soon so
we may change this because 6.0 allows sharing of drives between filers.
Greg
I know the recommended way is to have the library do hardware based
cleaning when it needs it, but I also know that netbackup can clean the
drives as well. What are the pros and cons to having netbackup do the
drive cleanings? I am seeing allot of alerts in our logs about no
cleaning tape
nb 5.0 mp7, Solaris 9
We primary use the netbackup java interface to monitor our master
servers. The other day a member of the backup team installed the
netbackup administration console on the Windows XP pro workstation.
However, when he clicks on the activity monitor you get no display, it
will
Sounds like you might have to rebuild your sgdrivers.
From /driver folder
Do a ../sg.build all -mt 10 -ml
Rename the sg.conf in the /kernel/drv folder
Then do ./sg.install
http://saifulaziz.wordpress.com/2006/12/18/how-to-configure-drive-on-solaris-for-veritas-netbackup-4/
nb 5.0 mp7 Solaris 9
We have replaced 2 drives in our L700 robot and I want to correct
netbackup and make it see the 2 new drives but do this without having to
shutdown netbackup. I am looking at using tpautoconf with -replace_drive
option. Is this what everyone else uses when they need to
Solaris 9, nb 5.0 mp7
Ok here is my setup and what we want to do. We have 1 master and 6
media servers. 3 media servers are site1 and 3 at site2 with 1 master
controlling both sites (their is a 4gig pipe connecting the 2 sites) .
At each site we have 2 Storagetek L700 libraries and a EMC CDL
I need to find the chart that has all client version and what OS they
support. I need to know what the latest clients version are for HP UX,
Solaris 8.x, 9.x and Wintel servers. I cant seem to find this chart
anymore on the Symantec website.
Greg
This e-mail and any attachments are
Thanks to all who responded!
Greg
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bob
Stump
Sent: Friday, March 30, 2007 2:27 PM
To: Hindle, Greg; NB List Mail
Subject: Re: [Veritas-bu] Compatibility chart
This is usually readily available
Solaris 9 nb50 mp7
I need to bring up a media server but not have any jobs run on it? what
do I need to stop on the media server or master to prevent jobs from
being sent to the media server to run?
Greg
This e-mail and any attachments are confidential, may contain legal,
professional or
nb 5.0 mp7 Solaris 9
I have a media server that is down at the moment for maint and I have to
run a restore. Both media servers connected to the same master. All I
need to do is add the force restore statement to the master bp.conf file
and then have the master rereads its bp.conf right?
add
To: Hindle, Greg; NB List Mail
Subject: RE: [Veritas-bu] force restore option
For restoring that is all you need.
For backing up you'd need to point your policy to the storage unit
associated with the other media server.
Also some operations will be slow due to timeouts trying to connect
Thanks for the input.
Greg
-Original Message-
From: Ed Wilts [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 21, 2007 10:14 PM
To: Hindle, Greg
Cc: NB List Mail
Subject: Re: [Veritas-bu] Upgrading to 6.0 planning
On 3/21/2007 12:36 PM, Hindle, Greg wrote:
Solaris 9 nb 5.p mp6
Solaris 9 nb 5.p mp6
We are starting the process planning to go from 5.0 to 6.0. We currently
have 1 master and 6 media servers. Would anyone like to share their
plans in upgrading? Did you setup a separate set of 6.0 servers and then
import the db? Did you make a copy of your 5.0 hard disks
Yes they need to be created locally for each media server that you wish
to change these settings on.
Greg
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Schmid
Stefan, Bedag
Sent: Tuesday, March 20, 2007 8:05 AM
To:
I use only fulls... We back up to tape as well as a filer path.
Greg
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Justin
Piszcz
Sent: Tuesday, March 20, 2007 9:26 AM
To: Veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Cumulative or
Try deleting that server out of the policy and then re adding it again.
Or you may need to delete the whole policy and recreate it. I have had
weird things like this as well and the only answer was to delete and re
add.
Greg
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
David,
How do you track policy changes?
Greg
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David
Rock
Sent: Tuesday, March 20, 2007 2:10 PM
To: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] NBU Aptare - Real World Benefits
* Ed Wilts
: Re: [Veritas-bu] NBU Aptare - Real World Benefits
* Hindle, Greg [EMAIL PROTECTED] [2007-03-20 14:27]:
David,
How do you track policy changes?
They have recently added a policy audit module that you can access the
same way you would accecss an automated report. We are currently on
6.0.14, I
Thanks!
Greg
-Original Message-
From: Liddle, Stuart [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 20, 2007 2:39 PM
To: Hindle, Greg; David Rock; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] NBU Aptare - Real World Benefits
Greg,
I can tell you that we run
What is the best practice in reusing old netbackup catalogue tapes? It
is just to use the bplabel to erase the internal label?
Greg
This e-mail and any attachments are confidential, may contain legal,
professional or other privileged information, and are intended solely for
the addressee.
Good point, never thought that netbackup did not know when the drives
were being cleaned. This explains allot! I have Storagetek L700 robots
and use hardware based cleaning. How can I switch this to get netbackup
to clean the drives after xx hours of use?
Greg
Greg
-Original
We had the same issue even though the DST patch was applied. We had to
restart netbackup and then everything was ok.
Greg
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Hudson,
Steve
Sent: Wednesday, March 14, 2007 1:18 PM
To: Sixbury, Dan;
nb 5.0 mp3 Solaris 9
Can I install the window server client on a XP box to back it up with
Netbackup? Does Symantec have a workstation edition that can be
installed?
Greg
This e-mail and any attachments are confidential, may contain legal,
professional or other privileged information, and
Thanks!
Greg
From: GAURAV RAKHEJA /RTGSADM/INFOTECH/BKC
[mailto:[EMAIL PROTECTED]
Sent: Monday, February 12, 2007 3:58 PM
To: Hindle, Greg
Cc: NB List Mail
Subject: RE: [Veritas-bu] netbackup pool tapes
Use following command
bpexpdate -ev media_id -d 0
all servers Solaris 9 nb 5.0 mp 6
All media server connected to the same master. Each media server is
connected to its own L700 robot. We want to move scratch tapes from one
media server to another. I have been told by Symantec support that we
can move these tapes but we should delete them from
This is gong to sound stupid but I have tried this before and it worked.
Try deleting the entire policy and recreate adding all the clients back
in. its simple I know but worth a try. We had weird issues with some
policies in the past and but doing this it fixed the issue but we never
found out
nb 5.0 mp6 Solaris 9
What is the recommend practice of backing up servers through a firewall?
Do you use the vnet option or any ports?
Should we use one data stream or multiple data streams?.
To multiplex or not to multiplex?
Greg
This e-mail and any attachments are confidential, may
nb 5.0 mp6 Solaris 9
Does anyone use netbackup 6.0 and the Aptare reporting software? With
NOM being part of 6.0 is there still a need to have Aptare?
Greg
This e-mail and any attachments are confidential, may contain legal,
professional or other privileged information, and are
Solaris 9 nb 5.0mp6
Can you have a nb 6.0 master and have the media servers be nb 5.0?
Greg
This e-mail and any attachments are confidential, may contain legal,
professional or other privileged information, and are intended solely for the
addressee. If you are not the intended recipient, do
Solaris 9 nb 5.0 mp6
Is there any easy way to move assigned media from one volume pool to
another? We have recreated our volume pools to meet new internal
standards but I have a bunch of tapes that cannot be moved because they
are assigned. The last time I talked to Symantec they said it was
nb 5.0 mp6 Solaris 9
We have been getting a high number of error 14's lately. What are the
possible causes and fixes?
Greg
This e-mail and any attachments are confidential, may contain legal,
professional or other privileged information, and are intended solely for
the addressee. If you
Nb 5.0 mp6 Solaris 9
I am looking to download a 5.0 remote admin java client fro my windows
xp laptop so I can remotely manage 5.0 servers. I have a new laptop and
someone here has misplaced the 5.0 cd that has this on it. Any help?
Greg
This e-mail and any attachments are
Nb 5.0 mp6 Solaris 9
Curious-How much free space is needed to perform a backup with VSP turn
on and how much is needed when it is turned off? I guess at what point
will a backup fail because there is not enough disk space free on the
client?
Greg
This e-mail and any attachments are
Boris, we have the same thing here but with LTO1 and 2. We have a L80 that has
4 drives one LTO 1 and two LTO 2. We use all lto1 tapes in the robot. LTO 2
will read and write LTO 1 tapes. So I would imagine that LTO 3 can read and
write LTO 2 tapes. Configure the drives as lto3 and just use LTO
Nb 5.0 mp6 Solaris 9
We are having a weird issue with our ndmp backups. We have 18 filers and
this failure is random and never the same filer back to back. What
happens is the backup starts, goes active in the activity monitor and
pushes some data and then just stops. No errors at all, nothing in
Nb 5.0 mp6 Solaris 9
We have a DMZ zone setup that has 10 servers in it. We back up these
servers through our firewall. We occasionally get connection errors. I
would like to know if anyone else out there would be interested in
sharing their setup, port ranges etc on how they backup servers
Technologist
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Hindle,
Greg
Sent: 18 December 2006 13:06
To: NB List Mail
Subject: [Veritas-bu] Firewall setup
Nb 5.0 mp6 Solaris 9
We have a DMZ zone setup that has 10 servers in it. We back up
How can I tell if my SDLT and LTO3 drives are show shining?
Greg
This e-mail and any attachments are confidential, may contain legal,
professional or other privileged information, and are intended solely for the
addressee. If you are not the intended recipient, do not use the information
in
across a tech note on the issue. I am trying to get him to send
me the link to it so I can post it here.
Greg
-Original Message-
From: Justin Piszcz [mailto:[EMAIL PROTECTED]
Sent: Tuesday, December 12, 2006 9:30 AM
To: Hindle, Greg
Cc: NB List Mail
Subject: Re: [Veritas-bu] Unix/Linux
[mailto:[EMAIL PROTECTED]
Sent: Tuesday, December 12, 2006 10:38 AM
To: Hindle, Greg
Cc: Justin Piszcz; NB List Mail
Subject: Re: [Veritas-bu] Unix/Linux file sizes question
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The log file or the catalog? Strange as the log file locations
(/usr/openv
I don't think you can turn this off because of the nature of the NDMP
protocol.
Greg
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Didier
BRUN
Sent: Friday, December 01, 2006 4:57 AM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu]
:[EMAIL PROTECTED] On Behalf Of Hindle,
Greg
Sent: Monday, December 04, 2006 1:13 PM
To: NB List Mail
Subject: [Veritas-bu] Deactivated policy's
Nbu 5.0 mp6 Solaris 3
Does anyone have a scrip that will list deactivated policy's?
Greg
This e-mail and any attachments are confidential, may contain
Title: Bp.conf setting question
Nb 5.0 mp6 Solaris 9
I am having an issue with NDMP backups just stopping during backups. No errors at all. I want to increase the verbose setting without having to increase the setting for all of netbackup. I have other settings like, vault_verbose=5, in my
Title: Creating a backup image for DR purpose
Solaris 9 nb 5.0 mp6
Is there something in netbackup that allows for an image to be created for a entire server very quickly for a DR restore situation? I am not looking for file by file backup like we do know but something that runs very
Ok So BRM can do this then? I am running 5.0 is there a version that
runs under 5.0 or do I have to have 6.0 installed?
Greg
-Original Message-
From: Dave Markham [mailto:[EMAIL PROTECTED]
Sent: Friday, November 03, 2006 10:02 AM
To: Hindle, Greg
Cc: NB List Mail
Subject: Re
Title: Windows file exclude script
Does anybody have a script that pushed out file excludes to window servers?
Greg
This e-mail and any attachments are confidential, may contain legal, professional or other privileged information, and are intended solely for the addressee. If you are
Title: Netbackup server clustering
Nb 5.0 mp6 Solaris 9
We are thinking of cluster our master server. Does anyone else cluster their server? Can someone send how they did this and why/advantages?
Greg
This e-mail and any attachments are confidential, may contain legal,
professional
Title: Error 14, weird problem
Nb 5.0 mp6 Solaris 9
I am running a differential backup on a Windows 2000 server and it keeps failing with error 14 tar file write error 40. When I look at the backup it keeps hanging when it tried to backup a particular file
NB is probably freezing all of these tapes and that is why you ran out
of tapes. Do you have the correct bar code rule setup for these new
tapes?
Greg
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Brooks,
Jason
Sent: Thursday, October 26, 2006
Title: Linux to Solaris 10 master
We have a netbackup 5.1 server running on Linux. Our UNIX team wants to replace this master server and run Solaris 10. Does netbackup store the catalog different under Linux than it does under Solaris? Are there any gotcha's I need to worry about when
Title: Merging Master servers
We have 1 Red hat Linux netbackup 5.1 master server that we need to merge with a Solaris 9 netbackup 5.0 master server, Symantec support will not help with this. Anyone out there done this or know the best way to do this?
The Linux master will be replaced with
Title: 6.0 advantages?
What advantages do you see in 6.x over 5.x? What things are better and easier etc. I need to get some points to be used for planning a 6.0 upgrade.
Greg
This e-mail and any attachments are confidential, may contain legal, professional or other privileged
Title: 185 error
Nb 5.0 mp6 Solaris 9
I am running 2 restores from different clients on different dates and I am getting a 185 error. Tar did not find all of the file to be restored. I have never seen this error before and I am not sure how to even troubleshoot this. All the tapes NB asked
Yes. As long as netbackup has access tot he client you can
access the client through the GUI. go to host properties then clients and then
the windows box you are trying to backup. Double click then Click on windows
Client and you will see exclude lists option.
Greg
From: [EMAIL PROTECTED]
Title: Managing Tape Rotations
I am not sure I follow your plan. If you have tapes in a
tape pool say "production data" and these tapes are vaulted out of your robot to
a offsite volume group say "company_offsite", these tapes should remain in the
original tape pool by design. If the tape is
Title: Copying a tape
Nb 5.0 mp6 Solaris 9
I have a few bad tapes that I need to transfer the data from. The tape I am going to needs to be promoted to the primary copy as I would be deleting the from tape out of netbackup. I want to make sure I am doing this right, so what command should
Title: Bad tapes how do you track?
Nb 5.0 mp4 Solaris 9
Ok We from time to time get read / write errors on tapes. When this happens we clean the drive and write protect the tape and put it on our bad tape rack never to be used again except if a restore is needed (we try to restore form it
t; to keep track but is
very manual so this is why I was looking for a better (automated) way to track
bad tapes.
Greg
From: WEAVER, Simon
[mailto:[EMAIL PROTECTED] Sent: Thursday, October 05,
2006 9:43 AMTo: Hindle, Greg; NB List MailSubject: RE:
[Veritas-bu] Bad tapes how do you track?
Hindle
Constellation Energy
Data Management Recovery
Room 500, 1068 N. Front St.
Baltimore, MD 21202
410-470-1552
[EMAIL PROTECTED]
-Original Message-
From: Peter DrakeUnderkoffler [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 05, 2006 10:20 AM
To: WEAVER, Simon
Cc: Hindle, Greg; NB List
Title: General Thank You
I just want to say thanks to all who have helped me and others on the list. I ask questions from time to time looking for answer and to confirm what I am thinking is the right path others would take. I dont always say thanks to each person who responds so consider
Title: Client Hostnames
We use fully QDN's here. We add 2 nics to each client one
with its public name and the other with a private name with NBU at the end. This
NBU interface is configured in the same vlan as our netbackup servers. Both
names are in DNS.
Greg
From: [EMAIL PROTECTED]
On 9/25/06, Hindle, Greg [EMAIL PROTECTED] wrote:
Ok good. Our NDMP backups are running 50-80mb/s, with spikes as high
as 100mb/s. But that is direct filer to drive by FC. I am more
concerned about going over our IP netbackup and making sure that
netbackup is setup correctly to achieve
Title: LTO3 show shining
Nb 5.0 mp6 Solaris 9
Ok Maybe this has been said before but with all the talked about show shining LTO3 FC drives. Currently I have NDMP backups going to my LTO 3 drives. Early next year when we buy more LTO3 drives we are changing over our non-ndmp backups to go
Title: DB backup
Nb 5.0 mp6 Solaris 9
I have my catalog backup configured to go to 2 online disk areas instead of tape. It will alternate form one file system (directory) to another. My question is I also want to put a copy on tape as well. How can I do this? The catalog config only
.
Greg
-Original Message-
From: Justin Piszcz [mailto:[EMAIL PROTECTED]
Sent: Monday, September 25, 2006 5:20 PM
To: Hindle, Greg
Cc: NB List Mail
Subject: Re: [Veritas-bu] LTO3 show shining
If your speeds are 27MB/s, you get Shoe Shining - 27MB/s is the
minimum you are supposed
Title: Backup through firewalls
Nb 5.0 mp6 Solaris 9
Do any of you backup servers through a firewall? What issues do you see in terms of failures? What ports do you typically open up for successful backups? Do you do anything special in the policy's for servers on the other side of a
Title: Backup up db database
Nbu 5.0 mp3 Solaris 9
What is the fastest way to backup up the db? We have backups that run 24 hours, so there Is not time we dont have backup running. What is the best way to back the db up? Any ideas?
Greg
This e-mail and any attachments are
Title: Message
Thanks Paul. Yes we want to move the L700 media and robotic
control and all to a new server. This will allow us, among other things, to shut
down one server for maintenance while the other server stays up and
runs.
Another question. Can I move the media based on volume
group
backups. So
the tapes are in separate volume groups and tape pools.
We are also adding a 3rd media server that will control our
EMC VTL when that goes fully into production later this
year.
Greg
From: Paul Keating
[mailto:[EMAIL PROTECTED] Sent: Wednesday, August 30,
2006 9:34 AMTo: Hindle
: Hindle, Greg;
veritas-bu@mailman.eng.auburn.eduSubject: RE: [Veritas-bu] Splitting
media servers
gotcha.
So
you've got 2 media servers and each controls 2x L700s, so you've got 4x L700s in
total?
are
the NDMP backups "remote" to the media servers? or are your filers connected
I am talking about enterprise vault add on for netbackup. It has been
around for a few years now. Its not well meshed with netbackup (yet).
Greg
-Original Message-
From: Rob Worman (home) [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 22, 2006 10:59 PM
To: Hindle, Greg
Cc: Darren
Title: netbackup DB inconsistency ?
Can you share that? I would like to see it if you can share
it.
Greg
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lewick,
TaylorSent: Wednesday, August 23, 2006 10:43 AMTo: Wessam
Aly; veritas-bu@mailman.eng.auburn.eduSubject: Re:
Title: netbackup DB inconsistency ?
Thanks for sharing this!
Greg
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lewick,
TaylorSent: Wednesday, August 23, 2006 11:30 AMTo:
veritas-bu@mailman.eng.auburn.eduSubject: [Veritas-bu] NBCC, perl my
version
This only works on
Title: Permanently removing a tape from netbackup
Nb 5.0 mp6 Solaris 9
What is the recommended way, best practice to permanently remove tapes from netbackup? We have some tapes they will be removed from one master and shipped to another location to a different master. But I want to make
This might sound dumb, but after you moved the library did you run a
inventory from netbackup? I have seen this error before when netbackup
thinks a slot has one type of media and it find another.
Greg
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Title: VTL images to tape
Nb 5.0 mp6 Solaris 9
We are getting ready to use EMC CDL VTL solution. One thing we see is that we need a script that will run everyday, possibility several times a day to copy the images from the VTL tapes and write them to physical tape. Does anyone have a
Title: Message
Paul,
The vaulting in 5.0 does not allow images to be copied from
a VTL to tape. The option is in the software but it does not work. We have
confirmed this with Symantec that the vault was written for tape to tape copies
not for VTL to tape. Even though netbackup sees that
. We could have
EMC do the VTL to tape process but that would be done outside of netbackup and
adds another step for restores. We elected not to go this
route.
Greg
From: Martin, Jonathan (Contractor)
[mailto:[EMAIL PROTECTED] Sent: Tuesday, August 22, 2006 1:17
PMTo: Hindle, Greg; Paul
: Hindle, Greg; Paul Keating;
veritas-bu@mailman.eng.auburn.eduSubject: RE: [Veritas-bu] VTL images
to tape
Can someone please confirm (or not)
this?
We're considering now NOT upgrading to 6.0 but instead
keeping our 5.1 environment and adding a VTL.
THANKS!
-Jonathan
From: [EMAIL PROTECTED
Are you using enterprise vault to get your images off from the VTL to
tape? This is what I am referring to. There is an option in enterprise
vault that says vault the images and du0liacte them to tape. This option
does not work if you are trying to vault from the VTL. You must use a
script to get
Good questions that they cannot answer. Enterprise vault was and is not
part of netbackup per se. It was written outside of netbackup and then
connected to netbackup. But vault does run outside of netbackup to a
point. So just because netbackup can see the VTL as a tape it does not
mean that vault
lto:[EMAIL PROTECTED] Sent: August 22, 2006
1:17 PMTo: Hindle, Greg; Paul Keating;
veritas-bu@mailman.eng.auburn.eduSubject: RE: [Veritas-bu] VTL
images to tape
Can someone please confirm (or not)
this?
We're considering now NOT upgrading to 6.0 but instead
keeping our 5.1 e
Title: Aptare vs. NB 6.0 NOM reporting
We are looking at reporting software for Netbackup. We are looking at Storage Console from Aptare. But I understand 6.0 with Nom also has reporting built in. We are currently running 5.0 mp6 but are planning to upgrade to 6.0. Is anyone using NOM and
Title: VSP question
Nb 5.0 mp6 Solaris 9
If VSP is turned off / disabled for a client, will netbackup still back up open files and open registry keys? A co worker is telling me that with VSP off open files will still be backed up. And the way to tell is to run a backup with VSP turned off
Good luck. This has never worked for us. Very rarely do we
get a full system restore of windows and have it boot just
fine.
Greg
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Shyam
HazariSent: Monday, July 10, 2006 8:48 AMTo: WEAVER,
SimonCc:
Does anyone have a tested, working restore procedure to
recover a windows server failure and crash? I would love to see what steps you
do to recover a windows box.
Greg
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Shyam
HazariSent: Monday, July 10, 2006 8:48 AMTo:
, July 10, 2006 8:57 AMTo: Hindle,
GregCc: veritas-bu@mailman.eng.auburn.eduSubject: Re:
[Veritas-bu] Windows OS restore
So what was the fix ?
Thanx
-Shyam
On 7/10/06, Hindle,
Greg [EMAIL PROTECTED]
wrote:
Good luck.
This has never worked for us. Very rarely do we get a full
. But
no matter what we could not get it working.
Greg
Hindle Constellation Energy Data Management Recovery
Room 500, 1068 N. Front
St. Baltimore, MD 21202 410-470-1552 [EMAIL PROTECTED]
From: WEAVER, Simon
[mailto:[EMAIL PROTECTED] Sent: Monday, July 10, 2006
9:10 AMTo: Hindle, Greg; Shyam HazariCc
Title: Emc VTL and netbackup question
Nb 5.0 mp6 Solaris 9 EMC CDL VTL
Ok here is the situation. We are testing this Emc CDL VTL. We backup data to the VTL and now need to get the data on the VTL copied to physical tape and then expire the image on the VTL. We were trying to use vault to
Title: Message
Yea that was one idea we came up with as well. But that
means we have to go and change all of our policy's over. But it is on the table
as an option. Thanks for confirming what we were thinking.
Greg
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul
1 - 100 of 157 matches
Mail list logo