The driver uses the wwn in the device name. This does not change if the tape
drive is plugged into another card or port.
len
lrwxrwxrwx 1 root root 71 Jul 30 2004 /dev/rmt/3cbn ->
../../devices/[EMAIL PROTECTED],60/SUNW,[EMAIL PROTECTED]/[EMAIL
PROTECTED],0/[EMAIL PROTECTED
Hello Mark,
Did I read in this list that netbackup was supposed to do some kind of checksum
on the data written to tape?
If so would a bpverify check this. I would assume that if netbackup does this
it would find the error.
because netbackup would do it's calc before passing the block to the ded
Hello Trey
Can you tell us how big your database has become. I assume from you note below
that there is only one database for all 6500 clients.
Also can you give us some idea of what kind of hardware you use to support this.
Thanks len
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Greg
Can you tell this group a little about the problems that you have seen that
require an Engineering fix.
Thanks len
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gregory Demilde
Sent: Thursday, December 06, 2007 5:57 AM
To: [EMAIL PROTECTED]
Cc: veritas-bu@mailman.eng.aubur
Simon,
Where are the bits that you are trying to install. A mapped cifs or smb share,
a cd mounted on the install target, A remote cd-rom or ?
len
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WEAVER, Simon
(external)
Sent: Monday, December 10, 2007
Good Morning,
In the policy for each of the virtual server names you use the virtual name.
Note that for the policy for the phyiscal server can not use All_local drives
because the active node for the virtual node will see the san disks as a local
drive.
len
-Original Message-
From: [
It sounds like you do not have the driver for your hba installed on the solaris
box.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Vines, Peter
(psv2b)
Sent: Monday, December 24, 2007 12:49 PM
To: Vines, Peter (psv2b); psv2b; [EMAIL PROTECTED]
Subject
Kevin,
Try the command
nbpemreq -suspend_scheduling
len
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Whittaker
Sent: Tuesday, January 08, 2008 10:59 AM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] NetBackup 6.5 and holding Jobs
Ok, when I was on 5.1 I cou
overhead job, like dups and db
backups.
Also I do not believe that this command will stop user backups such has rman.
It would be nice if one could do that also.
len
From: Kevin Whittaker [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 08, 2008 1:16 PM
To: Len Boyle; veritas-bu
I believe that netback is only supported on the gobal zone for a master/media
server.
Len
- Original Message -
From: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
To: veritas-bu@mailman.eng.auburn.edu
Sent: Mon Jan 21 17:04:04 2008
Subject: [Veritas-bu] Any issues about moving NetBackup from Sol
I am a little fuzzy on your exact plan of action.
Given that here is what I understand what you can do.
1) netapps write in a dump format. So you can issue the dump command on the
netapp and write the data out to tape or read in from tape. Unless things have
changed I believe that this is only
You are getting closer.
You can attach the tape drive to the netbackup master/media server and not the
filer and have things work. So you could use the same tape drive to restore
other netbackup data.
len
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeff Cleverley
Sent: Wednes
The ndmp backups of netapp filers back up the acls on NTFS and mixed volumes.
len
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Friday, January 25, 2008 2:16 PM
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: [Veritas-bu] NDMP back
Tim,
As someone else pointed out it sounds like the tape library has a limit on the
number of tapes that you can see.
You might want to check if the max number of slots was increased in the library
config. I do not know this library but the stk 9710 and L700 had
to have their configs changed wh
Good Morning Martin
I do not remember which platform you are using for you media servers.
On solaris using the st driver the use of hardware compress depends on which
device name you are using. from the following any of the dev entries with the
"c" will call for hardware compression. In netback
A full backup should be good. There should be an option to do a full backup
with a purge of the log files vs a full backup copy without the purge of the
log files.
len
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of osonder
Sent: Wednesday, March 19, 20
the considerations are similar to
those for automatic backups. A Backup Selections list is not needed because
users select the files before starting the operation.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Len Boyle
Sent: Wednesday, March 19, 2008 6:57
Simon,
Have you set up netbackup to use vnet for the connection, and have you opened
the firewall ports for the connection which are greater for master-to-media
server then for master/media to client.
I am not sure about NBU 5.1, but NBU 6 has a small booklet with all the ports
defined.
len
Look at the windows app event logs
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Randy Samora
Sent: Wednesday, April 09, 2008 10:16 AM
To: Rosenkoetter, Gabriel; Ed Wilts
Cc: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Clarification About Open File Backups
I apolo
Hello Larry,
An interesting list.
if you have clients/servers behind firewalls you may not be able to use the
ping command as the firewall may block. This is for questions 1 and 13.
If you are at level 6 you can use the
/usr/openv/netbackup/bin/admincmd/bptestbpcd command to check that the c
yes what levels of windows are you looking at
You can go to support.veritas.com and check for levels supported.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leidy, Jason D
Sent: Wednesday, April 30, 2008 5:05 PM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Netback
Hello Bob
I agree with b and c, but there a can be a little misleading as we learned the
hard way this past year.
Netbackup records the start of a fragment and not the location of the file on
the tape. So it has to read the whole fragment until it finds the file it is
looking for.
len
-Or
Hello Michael
Do you have netbackup cleaning the tape drives or only the tape library
cleaning the tape drives or both.
len
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Tuesday, May 06, 2008 9:47 AM
To: veritas-bu@mailman.eng.
Good Evening,
Is anyone sharing an IBM TS3500 (3584) between an z/os (mvs) system and
netbackup running on open systems.
If so can one share a tape drive? and not just the library. Of course not at
the same time would a tape drive be usable from both systems.
This assume at least two virtual l
Good Morning Steve,
After adding the new tape drives did you run the procedure to reinstall the
netbackup sg driver as written up in the MediaMgr_DeviceConfig_Guide.txt file
in the /usr/openv/volmgr directory?
If you following this procedure the devices should show up in the sgscan output
Fro
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Siano, James C
Sent: Friday, July 25, 2008 9:30 PM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] Could you read my tape? I threw it out my car
accidentally and you caught it. BackupExec/Netbackup
If I lost a tape - say
If you ask your IBM ce, they can fetch IBM's suggested entries for the st.conf
file.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Thursday, March 30, 2006 7:23 AM
To: 'veritas-bu@mailman.eng.auburn.edu'
Subject: [Veritas-bu] s
Hello Rusty
It is a windows driver thing for the HBA card. It has to do
with how many buffers can be chained together for a single I/O. You can look it
up on the microsoft web site.
But most of the HBA driver authors will allow you to change
a config setting, most likely in a registry ke
Hello Hampus,
Are you using multiple streams from the client node
when doing a backup?
Are there other non-backup tasks running on the
client when doing backups?
Are you using tape multiplexing? If so at what
level?
What is the nature of the files being restored?
We find that windows sys
We have an L700 shared between several netbackup masters.
We had to turn off all netbackup cleaning of tape drives to prevent
outages on the stk (now sun) drives. We did this per the tech note you listed.
len
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ambrose,
Mont
Title: NBU 6.0 catalog size vs 5.1 catalog size
Hello Wayne,
I can not tell you about the catalog space, but the log
space required is a huge jump in size. Their a number of new daemons running
each with it's own log. And
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Be
Hello Alex,
Like everything else in this area, there good and bad things about both
methods.
The risky part is in the fact that Full backup does the data base and the logs,
the Incremental only covers the logs. The Magic part of doing a full backup of
the data base is that the exchange backu
Good Day,
We upgraded a netbackup master running on solaris 9 from 5.1mp3 to 60MP2. This
master runs ndmp backups on 6 R200's with fibre direct attached IBM LTO-2 tape
drives. After the netbackup upgrade, with no changes with the tape drives, tape
library or netapps we started to see the follo
Hello Ian,
The story that I received was that there are several things going on. I believe
that it is covered in a technote.
But in summary, if you do not have an "Administrator email address" set to
anything, the email will go to the root userid on the master.
And due to a bug in the code
Title: Bpsched crashing
Good Morning Greg,
Have you changed setting in the /etc/system file to
increased things such as shared memory and msg queues?
len
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Hindle,
GregSent: Monday, May 15, 2006 9:04 AMTo:
veritas-bu@mailma
Title: Tapes keep freezing
Hello Abel,
What messages are you seeing in the bptm log for these
tapes?
len
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Vasquez,
Abel - BLS CTRSent: Monday, May 15, 2006 3:33 PMTo:
veritas-bu@mailman.eng.auburn.eduSubject: [Veritas-bu] T
Hello Justin,
>From what you have shown us it looks like a bad tape. But It would be good to
>try to read the tape using an util that is not netbackup. Like tcopy or dd,
>etc.
A few years ago, we had a problem with a restore of an active directory machine
that showed up as an i/o error. It tu
Tim
With the system state backups even if defined as a DI they
are full backups. I assume that since the "Shadow Copy Components" are a spin
off from the system state backups that they also are aways full backups.
len
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Wi
Hello Brandon,
Have you opened a problem ticket with netbackup support,
They are working on a replacement file for nbpem that hopefully will fix the
nbpem problems without creating new ones.
Or place a call for any netbackup module that core's.
len
From: [EMAIL PROTECTED]
[mailto:
Good Morning Richard,
What release and patch level of netbackup are you using
that is having this problem?
Did anyone make changes?
Will the job run if you start one of them with a manual
backup?
There are so many possible choices, if you can run a job
with a manual backup then you tri
Hello Bill,
MP3 is a big improvement over MP2.
len
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jorgensen, Bill
Sent: Thursday, July 06, 2006 7:55 PM
To: Ed Wilts; Justin Piszcz
Cc: veritas-mail-list; Ian; Dhotre,Shekhar; Johnny Oestergaard; Jeff L
Title: Message
Hello Jonathan,
Please look at this url for netbackup support for os levels
using version 5.1
If I read this correctly you should be able to download and
apply a 5.1 patch to support x86 solaris, with a "readme" or limits on the
support.
http://ftp.support.veritas.com/p
ning under
the assumption that the Solaris 10 SPARC and Solaris 10 X86 binaries are 100%
different animals and are not cross compatible.
Is this not correct?
-Jonathan
From: Len Boyle [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 11, 2006 10:56 AMTo: Martin, Jonathan
(Contractor);
I suspect that you need to upgrade to MP3.
Do you see core files from netbackup in root's home
directory?
If you still have problems, please open a trouble call with
sysmantec. There a a stack of post mp3 in the works.
len
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Sergey,
We have not used LTO-3 drives on our Sun boxes yet, so I
can not give you an answer for the best HBA,
But can I ask you to give thelist a little more detail, on
the problems that you saw with you QLogic adapters. And which Qlogic cards were
they.
Thanks len
From: [EMAIL PROTE
You have to look at the logs on the netapp. You can look in
the /etc/messages file, but I suspect that you will not find anything.
There is also an ndmplog (watch my spelling) If memory
serve me you issue the command on the netapp of ndmpd debug xx
where the higher the number the more deta
Good Evening Jamie
I assume that you are using an netapp box.
If so do you see anything of interest in the file /vol/vol0/etc/messages /*
assumes that where you installed the ontap system */
Also anything of interest in /vol/vol0/etc/log/ndmpdlog.2006mmdd /* you will
have to debugging on with
Hello this is just a guess.
If you have netbackup set to use the archive bit for
the check for a new backup, then it might be that the archive is not reset by
the full backup.
Maybe the job does not have update auth on the CIFS
network drive.
If so, you might change netbackup to use time
We also ran into sched problems with nbu 6.0, not as bad Ed. But most of them
have been fixed with MP3 and the post MP3 patches.
We have three systems using netbackup 6. One is very small and only saw one
sched error with a 200 error code. The second system is medium sized and we saw
a little b
Title: Message
Yes. If you are using netbackup you can restore the data
from one NDMP backup to another NDMP location by using a different dest from the
source. They have to be of the same type of NDMP backup.
Our NDMP backups are with Netapp file servers. We can
restore to another d
Hello Juan,
You need to look in the event logs on the exchange server. This should have
more detailed error logs on the problem. That is exchange error logs not
netbackup logs. You might also look at system or hardware error messages also.
With the exchange error logs, you can check support.mi
Sto,
Can you go into a little detail on how Snapmirror to tape works?
Thanks len
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sto Rage(c)
Sent: Friday, October 20, 2006 6:49 PM
To: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] NDMP da
Mark,
Backupexec and netbackup can co-exist on the same client.
We used to have backupexec installed on our exchange servers for exchange api
backups and netbackup for system-state/file systems backups. It was no problem
before the sysmantec purchase of backupexec. After the purchase you h
It depends on the code level of the netbackup server, the code level of the
netbackup client and the settings you have set on the netbackup server for the
client.
For version 6 there is a ports usage guide.
len
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] O
Jason,
We have downloaded ibm tape drivers for hp/ux from the
url:
http://www-1.ibm.com/support/dlsearch.wss?rs=546&tc=STCVQ6Z&dc=D430
For solaris 9 we are using the sun drivers for ibm LTO3
tape drives with qlogic cards.
len
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On B
Phil,
6.0 is the release that did the multithreading thing. I am not sure if all of
netbackup is now multithreaded, but much of it is.
For us the early 6.0 was really unstable, but we had several problems with 5.1
that were fixed with 6.0. (Because netbackup 5 was not multithreaded we had
t
Hello Courtenay,
A few questions.
Which storage unit, with what os and what os level are you using for the NDMP
backups? Is the tape drive, of which make and model, attached to the storage
unit
What level do you have the new vx logs set to?
We found out the hard way that a high debug level w
Good Day Pondy
I did not notice any change between netbackup 5 and 6 in performance for the
encryption option.
The encryption option uses large quantities of cpu on the client. If you have
a client with plenty of spare cpu, you should see no difference in the backup
speeds. But you will l
Hello Tom,
The answer to question 1 depends on what you mean by multiple jobs per filer.
First of all are you looking to do multiple jobs in parallel or just do
multiple volumes or qtrees.
In the ndmp policy you can list multiple volumes or qtrees in the policy with
optional new stream sta
Michael,
The first place to look for the real reason for the 99 error is to look at the
logs on the NAS box, not the netbackup logs.
len
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Winn
Sent: Tuesday, February 06, 2007 8:46 PM
To:
Hello Kent
We ran into this when we upgraded to netbackup 6.0. But with us it was using
IBM lto-2 tape drives in an IBM 3584 library attached to netapp R200 boxes.
With out solaris and hp/ux masters writing to IBM lto-2 tape drives in the same
libraries we did not see the problem.
We put the
Chris
Do you have the master patched to mp4. There were a number of fixes in the mp3
and mp4 patch sets for this problem.
len
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Christopher Jay
Manders
Sent: Tuesday, March 13, 2007 1:05 PM
To: veritas-b
ritas-bu@mailman.eng.auburn.edu
Cc: Preston, Douglas L; Len Boyle
Subject: Re: [Veritas-bu] Backup jobs not kicking off any more
Hi,
Thanks for the responses so far. Doug, yours comes close to what support has
suggested, and we have tried it. More on that below... Still no go... :(
A coup
Also remember some of the libraries require that they do the cleaning.
We found this to be the case for stk (now sun) libraries with the ACSLS
software. And the IBM 3584 library with the ALMS feature.
len
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf O
You might want to talk to your sales folks and tell them that you are no happy
with the reboot solution.
You might also tell this to the support folks and ask them to talk to higher
level support folks and/or dev to give you information on how to collect
debug information for them to sol
Did you check the url
http://ftp.support.veritas.com/pub/support/products/NetBackup_Enterprise_Server/278064.pdf
To see if the client you used is supported.
You can do one thing to rule out netbackup. Try backing up the server with the
ntbackup command that is shipped with windows 2003. If th
Ah but UFS is journaled, at least in solaris 9
len
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeff Lightner
Sent: Wednesday, April 04, 2007 3:43 PM
To: Veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] VxFS for /usr/openv volume
I concur
Hello Wessam,
Did you install a netbackup 6.0 maint pack first thing after the upgrade? There
was a read me note in the service packs that this was required.
len
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wessam Aly
Sent: Sunday, April 1
Good Morning,
We are not using NDMP, with the EMC box, but I believe that the answer will be
the same.
The main thing to remember about ndmp backups is that a netbackup client is not
doing the backup. The EMC box is doing the backup. So you have to look at the
rules that the EMC box impose
If you are required to stay with microsoft features on the windows server, they
have a free unix add on which would include grep.
And it appears that with windows 2003 R2 they have done a fair bit of
enhancement work. I have not tried the R2 support. With the base feature it
does not appear as
The only methods that I know of are to do the encrypting in hardware.
You can use an external box inserted between the NDMP device and the tape
drive. For example a DECRU box now owned by netapp. There are others.
Or you can do it in the tape drive. The latest stk (sun) and ibm tape drives
s
I believe that netbackup supports backups and restores of ZFS but does not
support the acl's.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Koping Wang
Sent: Tuesday, May 08, 2007 7:03 PM
To: Juan Rojas; veritas-bu@mailman.eng.auburn.edu
Subject
IBM has released their drives at the end of last month.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Kiles
Sent: Monday, May 14, 2007 2:14 PM
To: Veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] LTO4
Any idea when LTO4 drives/media starts
It is not supported. You should be at 5.x or 6.0 for netbackup 6.0.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Carl Mathews
Sent: Thursday, May 17, 2007 9:59 AM
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] 5.1 Oct 2007 End of Supp
Hello Kathryn,
Someone from netbackup devel will have to give the final word. But I believe
that answer is yes it will encrypt the data again. To the backup software it
should just be a stream of binary bytes.
len
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] O
Hello Mark
When the restores were running on the master/media/client systems, did they
both have the same level of usage outside of the restores. That is was the cpu
busy, i/o usage pattern, network usage etc at the same levels for both
restores.
If the user backup was running when the s
then those used by the master scheduled backup.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 04, 2007 11:32 AM
To: Len Boyle; veritas-bu@mailman.eng.auburn.edu
Subject: RE: [Veritas-bu] Performance issues with user initiated backups.
Thanks Len
No restores were
Hello Bevan
Do you have the ndmp logs turned on the netbackup server? You might also want
to turn the debug level up to 50 on the filer, but I suspect that the problem
is on the netbackup side of things.
Do you see any hardware errors in the os error logs?
Have you tried to attach the lto tap
Hello David,
I believe that you have to look at the error logs on the NDMP device to find
the root cause of the problem.
The 99 error code is one of those codes that can include almost anything that
causes a fault in the backup process.
The logs on the NDMP device should have more detail
Good Afternoon
Take a look at the url http://www.lto.org/default.php
len
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of hebeonline
Sent: Monday, July 16, 2007 9:51 PM
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: [Veritas-bu] Re: HP LTO3 media on IBM 8
What do the event logs on the exchange server report?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Friday, July 27, 2007 10:31 AM
To: [EMAIL PROTECTED]; veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] Exchange restor
The netbackup version 6 os compatibility matrix says that it is
supported with MP2. Except for encryption support which requires mpt4.
If you go to the support web site you should be able to download the mp4
bits for x64. You just have to down load the windows server code with
the windows client
This problem is the reason that our master and media servers at at mp4 and our
windows clients are at mp3.
So it should work for you.
Since mp5 is due out in the next few days you might want to contact support and
see if they can get you the mp5 binaries.
len
Hello Ed,
I wonder if the netbackup folks could release the sample code in source
management format. Something that would work on most if not all their
supported platforms. At least on the support master platforms.
They could release a source depot as a base, then release patches for
netbackup
Hello Ed,
The firmware for the IBM 3584 has a recent update to enable support for
10-char labels. We have not try this out.
len
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ed
Scheef
Sent: Friday, August 10, 2007 10:55 AM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [V
Krzys
Go back and look at the readme that comes with the MP5 bits. There may
be more then one depending on which options you have.
If you are upgrading to a new version of netbackup you have to use the
solaris pkgrm commands to remove the netbackup software from solaris
system. But this process
The answer may depend on what device is at the other end of NDMP.
I was told that with NetApp NDMP that changing the buffer did not change
performance due to the way that the WAFL filesystem handled things.
It would be interesting to revisit this and see if they had made any
changes to enable lar
Hello Nick
What OS are you using on the 6850?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Nick
Majeran
Sent: Friday, August 24, 2007 3:23 PM
To: veritas-bu@mailman.eng.auburn.edu; Curtis Preston
Subject: Re: [Veritas-bu] 10GB network + perf questions
Good Morning Sergey,
The answers are it depends.
You have to make sure that you do not have the system try to load a
LTO-3 tape into a LTO-2 tape drive.
A simple method if you have the IBM 3584 tape library is to define a new
virtual library for the LTO-3 tape drives and treat them a
Hello
For your UNIX clients you can use the update_clients command to update
the netbackup client code and the update_dbclients netbackup command to
update the netbackup agent code.
So to update all the clients running hp-ux11.11 on the HP9000-800 boxes
run the following command.
u
Good Morning,
>From what you wrote, I assume that you are using a master server that is
running solaris.
With the solaris master it loads the solaris client code. To have the
other *nix client/hardware support you have to install the client
support. When you install the client code, you can
Hello Dan,
We have been working with netbackup client encryption and decru
encryption.
We use the netbackup encryption option without compression. So the tape
drives (lto-2 and lto-3 could not compress). I believe that the
netbackup client can also compress the data, but we have not tried t
Hello Kathryn,
We are not, but you might want to download the device mapping file
listed in this doc:
http://ftp.support.veritas.com/pub/support/products/NetBackup_Enterprise
_Server/280666.pdf
len
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kathry
Good Morning
Have they checked the power supplies and the internal cpu card in the L700e
Tape Library.
len
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Muhammad Ali
Sent: Wednesday, September 12, 2007 2:59 AM
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] STK L700
Hello Vladimir,
A long time ago, we had a problem with timeouts and IBM gave us a sample
st.conf file with different timeout values for the lto tape drives. It was a
long time ago, so I do not know if the error messages match. But you might want
to look at the st.conf file entries for IBM lto-2
the reboot.
Has anyone else seen this?
Have a fix?
Know how to trace or track windows logs for this problem?
Thanks Len Boyle
___
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Hello Steve,
With out netbackup 6.5.1 system we have listed a choice of
Linux, RedHat2.4
And
Linux, RedHat2.6
And with our red hat 5 system the Linux, RedHat2.6 option seems to work.
len
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Hudson, Steve
Sent: Monday, August
These are the new format logs for netbackup. They are written up in the
troubleshooting guide.
>From the nblog.conf file in the /usr/openv/netbackup directory.
163.L10nResource=nbsvcmon
163.OIDNames=nbsvcmon
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Randy Samora
Sent: Thur
What would be really great, would let the media names be site defined.
So you could name them lto4 or lto4hh or lto4hp or lto4ibm or …..
Another great idea would be to allow a site to choose the library names. So
that instead of tld(0) for a library one could have a name such as borg or
or sun
Yes the netbackup hot catalog backups can be written to disk.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of toaster
Sent: Thursday, October 02, 2008 9:27 AM
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: [Veritas-bu] NBU catalog backups hot vs cold
Abo
1 - 100 of 234 matches
Mail list logo
