RE: [Veritas-bu] Export and Import NetBackup configuration
Dave What do you do?? Recover to an alternative Server or recover to a different name? Is there a documented process? Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B32AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Dave Markham [mailto:[EMAIL PROTECTED] Sent: 09 May 2006 11:00 To: WEAVER, Simon Cc: 'Kathy Falakfarsa'; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Export and Import NetBackup configuration It is exactly what i do for a DR process. Only caveat is need to have the hostname of the backup server to be the same as its embedded into the catalogue and with different host names i couldnt get the robot and certain things to work correctly. Cheers WEAVER, Simon wrote: */Hi/* */what I understand is, if you use have a Catalog Backup Tape, you can use BPRECOVER onto the new Server, providing the Server name is correct./* *//* */There is an unofficial method to recovering the data to a different server, but not sure if you want to go down this route, and I do not know if Symantec would like it!/* *//* */but I hear it is possible from their consultants/* /Regards/ /Simon Weaver *3rd Line Technical Support Windows Domain Administrator*/ /EADS Astrium Limited, B32AA IM (DCS)/ /Anchorage Road, Portsmouth, PO3 5PU/ /Email: //[EMAIL PROTECTED]/ mailto:[EMAIL PROTECTED] -Original Message- *From:* Kathy Falakfarsa [mailto:[EMAIL PROTECTED] *Sent:* 05 May 2006 19:49 *To:* veritas-bu@mailman.eng.auburn.edu *Subject:* [Veritas-bu] Export and Import NetBackup configuration Hello, Does anyone know, if I can Export the NetBackup configuration from an existing NetBackup server and Import it to a new server on another site? NetBackup: 5.0 with MP2 OS: Windows 2003 Ent. SP1 Thanks This email is for the intended addressee only. If you have received it in error then you must not use, retain, disseminate or otherwise deal with it. Please notify the sender by return email. The views of the author may not necessarily constitute the views of EADS Astrium Limited. Nothing in this email shall bind EADS Astrium Limited in any contract or obligation. EADS Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England This email is for the intended addressee only. If you have received it in error then you must not use, retain, disseminate or otherwise deal with it. Please notify the sender by return email. The views of the author may not necessarily constitute the views of EADS Astrium Limited. Nothing in this email shall bind EADS Astrium Limited in any contract or obligation. EADS Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Export and Import NetBackup configuration
Use same name, install SW on secondary box with same setup, run bprecover, be on your way. On 5/10/06, WEAVER, Simon [EMAIL PROTECTED] wrote: Dave What do you do?? Recover to an alternative Server or recover to a different name? Is there a documented process? Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B32AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Dave Markham [mailto:[EMAIL PROTECTED] Sent: 09 May 2006 11:00 To: WEAVER, Simon Cc: 'Kathy Falakfarsa'; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Export and Import NetBackup configuration It is exactly what i do for a DR process. Only caveat is need to have the hostname of the backup server to be the same as its embedded into the catalogue and with different host names i couldnt get the robot and certain things to work correctly. Cheers WEAVER, Simon wrote: */Hi/* */what I understand is, if you use have a Catalog Backup Tape, you can use BPRECOVER onto the new Server, providing the Server name is correct./* *//* */There is an unofficial method to recovering the data to a different server, but not sure if you want to go down this route, and I do not know if Symantec would like it!/* *//* */but I hear it is possible from their consultants/* /Regards/ /Simon Weaver *3rd Line Technical Support Windows Domain Administrator*/ /EADS Astrium Limited, B32AA IM (DCS)/ /Anchorage Road, Portsmouth, PO3 5PU/ /Email: //[EMAIL PROTECTED]/ mailto:[EMAIL PROTECTED] -Original Message- *From:* Kathy Falakfarsa [mailto:[EMAIL PROTECTED] *Sent:* 05 May 2006 19:49 *To:* veritas-bu@mailman.eng.auburn.edu *Subject:* [Veritas-bu] Export and Import NetBackup configuration Hello, Does anyone know, if I can Export the NetBackup configuration from an existing NetBackup server and Import it to a new server on another site? NetBackup: 5.0 with MP2 OS: Windows 2003 Ent. SP1 Thanks This email is for the intended addressee only. If you have received it in error then you must not use, retain, disseminate or otherwise deal with it. Please notify the sender by return email. The views of the author may not necessarily constitute the views of EADS Astrium Limited. Nothing in this email shall bind EADS Astrium Limited in any contract or obligation. EADS Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England This email is for the intended addressee only. If you have received it in error then you must not use, retain, disseminate or otherwise deal with it. Please notify the sender by return email. The views of the author may not necessarily constitute the views of EADS Astrium Limited. Nothing in this email shall bind EADS Astrium Limited in any contract or obligation. EADS Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
RE: [Veritas-bu] Export and Import NetBackup configuration
I know that!! But in response to another thread, is there a document that allows you to recover to an alternative name! I know its an unsupported method, but I belive there is a way around it But im not paying a consultant to do it :-) Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B32AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Justin Piszcz [mailto:[EMAIL PROTECTED] Sent: 10 May 2006 11:56 To: WEAVER, Simon Cc: veritas-bu Subject: Re: [Veritas-bu] Export and Import NetBackup configuration Use same name, install SW on secondary box with same setup, run bprecover, be on your way. On 5/10/06, WEAVER, Simon [EMAIL PROTECTED] wrote: Dave What do you do?? Recover to an alternative Server or recover to a different name? Is there a documented process? Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B32AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Dave Markham [mailto:[EMAIL PROTECTED] Sent: 09 May 2006 11:00 To: WEAVER, Simon Cc: 'Kathy Falakfarsa'; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Export and Import NetBackup configuration It is exactly what i do for a DR process. Only caveat is need to have the hostname of the backup server to be the same as its embedded into the catalogue and with different host names i couldnt get the robot and certain things to work correctly. Cheers WEAVER, Simon wrote: */Hi/* */what I understand is, if you use have a Catalog Backup Tape, you can use BPRECOVER onto the new Server, providing the Server name is correct./* *//* */There is an unofficial method to recovering the data to a different server, but not sure if you want to go down this route, and I do not know if Symantec would like it!/* *//* */but I hear it is possible from their consultants/* /Regards/ /Simon Weaver *3rd Line Technical Support Windows Domain Administrator*/ /EADS Astrium Limited, B32AA IM (DCS)/ /Anchorage Road, Portsmouth, PO3 5PU/ /Email: //[EMAIL PROTECTED]/ mailto:[EMAIL PROTECTED] -Original Message- *From:* Kathy Falakfarsa [mailto:[EMAIL PROTECTED] *Sent:* 05 May 2006 19:49 *To:* veritas-bu@mailman.eng.auburn.edu *Subject:* [Veritas-bu] Export and Import NetBackup configuration Hello, Does anyone know, if I can Export the NetBackup configuration from an existing NetBackup server and Import it to a new server on another site? NetBackup: 5.0 with MP2 OS: Windows 2003 Ent. SP1 Thanks This email is for the intended addressee only. If you have received it in error then you must not use, retain, disseminate or otherwise deal with it. Please notify the sender by return email. The views of the author may not necessarily constitute the views of EADS Astrium Limited. Nothing in this email shall bind EADS Astrium Limited in any contract or obligation. EADS Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England This email is for the intended addressee only. If you have received it in error then you must not use, retain, disseminate or otherwise deal with it. Please notify the sender by return email. The views of the author may not necessarily constitute the views of EADS Astrium Limited. Nothing in this email shall bind EADS Astrium Limited in any contract or obligation. EADS Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu This email is for the intended addressee only. If you have received it in error then you must not use, retain, disseminate or otherwise deal with it. Please notify the sender by return email. The views of the author may not necessarily constitute the views of EADS Astrium Limited. Nothing in this email shall bind EADS Astrium Limited in any contract or obligation. EADS Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
RE: [Veritas-bu] Export and Import NetBackup configuration
Will do Justin Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B32AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Justin Piszcz [mailto:[EMAIL PROTECTED] Sent: 10 May 2006 15:00 To: WEAVER, Simon Cc: veritas-bu Subject: Re: [Veritas-bu] Export and Import NetBackup configuration Good luck, if you find one, let me know. On 5/10/06, WEAVER, Simon [EMAIL PROTECTED] wrote: I know that!! But in response to another thread, is there a document that allows you to recover to an alternative name! I know its an unsupported method, but I belive there is a way around it But im not paying a consultant to do it :-) Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B32AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Justin Piszcz [mailto:[EMAIL PROTECTED] Sent: 10 May 2006 11:56 To: WEAVER, Simon Cc: veritas-bu Subject: Re: [Veritas-bu] Export and Import NetBackup configuration Use same name, install SW on secondary box with same setup, run bprecover, be on your way. On 5/10/06, WEAVER, Simon [EMAIL PROTECTED] wrote: Dave What do you do?? Recover to an alternative Server or recover to a different name? Is there a documented process? Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B32AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Dave Markham [mailto:[EMAIL PROTECTED] Sent: 09 May 2006 11:00 To: WEAVER, Simon Cc: 'Kathy Falakfarsa'; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Export and Import NetBackup configuration It is exactly what i do for a DR process. Only caveat is need to have the hostname of the backup server to be the same as its embedded into the catalogue and with different host names i couldnt get the robot and certain things to work correctly. Cheers WEAVER, Simon wrote: */Hi/* */what I understand is, if you use have a Catalog Backup Tape, you can use BPRECOVER onto the new Server, providing the Server name is correct./* *//* */There is an unofficial method to recovering the data to a different server, but not sure if you want to go down this route, and I do not know if Symantec would like it!/* *//* */but I hear it is possible from their consultants/* /Regards/ /Simon Weaver *3rd Line Technical Support Windows Domain Administrator*/ /EADS Astrium Limited, B32AA IM (DCS)/ /Anchorage Road, Portsmouth, PO3 5PU/ /Email: //[EMAIL PROTECTED]/ mailto:[EMAIL PROTECTED] -Original Message- *From:* Kathy Falakfarsa [mailto:[EMAIL PROTECTED] *Sent:* 05 May 2006 19:49 *To:* veritas-bu@mailman.eng.auburn.edu *Subject:* [Veritas-bu] Export and Import NetBackup configuration Hello, Does anyone know, if I can Export the NetBackup configuration from an existing NetBackup server and Import it to a new server on another site? NetBackup: 5.0 with MP2 OS: Windows 2003 Ent. SP1 Thanks This email is for the intended addressee only. If you have received it in error then you must not use, retain, disseminate or otherwise deal with it. Please notify the sender by return email. The views of the author may not necessarily constitute the views of EADS Astrium Limited. Nothing in this email shall bind EADS Astrium Limited in any contract or obligation. EADS Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England This email is for the intended addressee only. If you have received it in error then you must not use, retain, disseminate or otherwise deal with it. Please notify the sender by return email. The views of the author may not necessarily constitute the views of EADS Astrium Limited. Nothing in this email shall bind EADS Astrium Limited in any contract or obligation. EADS Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu This email is for the intended addressee only. If you have received it in error then you must not use, retain, disseminate or otherwise deal with it. Please notify the sender by return email. The views of the author may not necessarily constitute the views of EADS Astrium Limited. Nothing in this email shall bind
RE: [Veritas-bu] Export and Import NetBackup configuration
Am I misinterpreting the original post? According to the manual, using bprecover with the -dhost option is supposed to allow recovery of the database to an alternate host. This is a snippet from the command manual. bprecover -dhost destination_host Specifies the host to which the selected catalog is restored. Normally, catalogs are restored to the host where the data originated (as displayed with the -l option). The -d option makes it possible to restore the catalog to another host. Caution Use the dhost option with EXTREME caution, since it can overwrite existing catalogs on the destination host. To permit recovery in case you unintentionally overwrite the wrong catalogs, you can move existing catalogs to a temporary directory on the destination host. The following NetBackup client software must be installed on the destination host: /usr/openv/netbackup/bin/bpcd and /usr/openv/netbackup/bin/tar Note Do not specify -r all (or ALL) with -dhost when using this command. Either explicitly specify an image (for example, -r 2) or use the interactive mode (-r). Patrick Whelan NetBackup Specialist Architect Engineering +44 20 7863 5243 Of all the things I've lost, I miss my mind the most! - Unknown * The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. The contents of this message and its attachments are confidential and may also be subject to legal privilege. If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates (COLT) and any other party by email Communications unless expressly agreed in writing with such other party. Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
RE: [Veritas-bu] Export and Import NetBackup configuration
Thanks for the information. Could you please let me know what document you got that information from, so I can downloaded and review it. Thanks Kathy -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Whelan, Patrick Sent: May 10, 2006 11:48 AM To: Ed Wilts; WEAVER, Simon Cc: Justin Piszcz; veritas-bu Subject: RE: [Veritas-bu] Export and Import NetBackup configuration Am I misinterpreting the original post? According to the manual, using bprecover with the -dhost option is supposed to allow recovery of the database to an alternate host. This is a snippet from the command manual. bprecover -dhost destination_host Specifies the host to which the selected catalog is restored. Normally, catalogs are restored to the host where the data originated (as displayed with the -l option). The -d option makes it possible to restore the catalog to another host. Caution Use the dhost option with EXTREME caution, since it can overwrite existing catalogs on the destination host. To permit recovery in case you unintentionally overwrite the wrong catalogs, you can move existing catalogs to a temporary directory on the destination host. The following NetBackup client software must be installed on the destination host: /usr/openv/netbackup/bin/bpcd and /usr/openv/netbackup/bin/tar Note Do not specify -r all (or ALL) with -dhost when using this command. Either explicitly specify an image (for example, -r 2) or use the interactive mode (-r). Patrick Whelan NetBackup Specialist Architect Engineering +44 20 7863 5243 Of all the things I've lost, I miss my mind the most! - Unknown * The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. The contents of this message and its attachments are confidential and may also be subject to legal privilege. If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates (COLT) and any other party by email Communications unless expressly agreed in writing with such other party. Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Export and Import NetBackup configuration
The dhost parameterjust restores the files from the catalog backup to a host other than the one you're running bprecover on. So you might have files other than the master catalog one the catalog backup tape, such as a media server's voldb, or even some non-NetBackup files. I used to backup several SQL-Backtrack catalogs with bpbackupdb, along with the master's catalog and several media server's voldbs. The -dhost let me recover all of these different hosts' by just mounting the tape once on the master (but running bprecover several times). You can physically restore the master catalog to whatever server name you like, but NetBackup (probably!) won't work... On 5/10/06, Whelan, Patrick [EMAIL PROTECTED] wrote: Am I misinterpreting the original post?According to the manual, using bprecover with the -dhost option is supposed to allow recovery of the database to an alternate host. This isa snippet from the command manual.bprecover-dhost destination_hostSpecifies the host to which the selected catalog is restored. Normally, catalogs are restored to the host where the data originated (asdisplayedwith the -l option). The -d option makes it possible to restore thecatalog to another host.Caution Use the dhost option with EXTREME caution, since it can overwrite existingcatalogs on the destination host. To permit recovery in case youunintentionallyoverwrite the wrong catalogs, you can move existing catalogs to atemporarydirectory on the destination host. The following NetBackup client software must be installed on thedestination host:/usr/openv/netbackup/bin/bpcdand/usr/openv/netbackup/bin/tarNote Do not specify -r all (or ALL) with -dhost when using this command. Eitherexplicitly specify an image (for example, -r 2) or use the interactivemode (-r).Patrick WhelanNetBackup SpecialistArchitect Engineering+44 20 7863 5243Of all the things I've lost, I miss my mind the most! - Unknown *The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. The contents of this message and its attachments are confidential and may also be subject to legal privilege.If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies.Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates (COLT) and any other party by email Communications unless expressly agreed in writing with such other party. Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900. ___Veritas-bu maillist-Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
RE: [Veritas-bu] Export and Import NetBackup configuration
Kathy Most likely from the Netbackup SysAdmin guide or Media Manager guide perhaps? Wasn't the original question about using bprecover on the same server which would be in standby? Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B32AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Kathy Falakfarsa [mailto:[EMAIL PROTECTED] Sent: 10 May 2006 17:24 To: Whelan, Patrick; Ed Wilts; WEAVER, Simon Cc: Justin Piszcz; veritas-bu Subject: RE: [Veritas-bu] Export and Import NetBackup configuration Thanks for the information. Could you please let me know what document you got that information from, so I can downloaded and review it. Thanks Kathy -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Whelan, Patrick Sent: May 10, 2006 11:48 AM To: Ed Wilts; WEAVER, Simon Cc: Justin Piszcz; veritas-bu Subject: RE: [Veritas-bu] Export and Import NetBackup configuration Am I misinterpreting the original post? According to the manual, using bprecover with the -dhost option is supposed to allow recovery of the database to an alternate host. This is a snippet from the command manual. bprecover -dhost destination_host Specifies the host to which the selected catalog is restored. Normally, catalogs are restored to the host where the data originated (as displayed with the -l option). The -d option makes it possible to restore the catalog to another host. Caution Use the dhost option with EXTREME caution, since it can overwrite existing catalogs on the destination host. To permit recovery in case you unintentionally overwrite the wrong catalogs, you can move existing catalogs to a temporary directory on the destination host. The following NetBackup client software must be installed on the destination host: /usr/openv/netbackup/bin/bpcd and /usr/openv/netbackup/bin/tar Note Do not specify -r all (or ALL) with -dhost when using this command. Either explicitly specify an image (for example, -r 2) or use the interactive mode (-r). Patrick Whelan NetBackup Specialist Architect Engineering +44 20 7863 5243 Of all the things I've lost, I miss my mind the most! - Unknown * The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. The contents of this message and its attachments are confidential and may also be subject to legal privilege. If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates (COLT) and any other party by email Communications unless expressly agreed in writing with such other party. Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu This email is for the intended addressee only. If you have received it in error then you must not use, retain, disseminate or otherwise deal with it. Please notify the sender by return email. The views of the author may not necessarily constitute the views of EADS Astrium Limited. Nothing in this email shall bind EADS Astrium Limited in any contract or obligation. EADS Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Export and Import NetBackup configuration
It is exactly what i do for a DR process. Only caveat is need to have the hostname of the backup server to be the same as its embedded into the catalogue and with different host names i couldnt get the robot and certain things to work correctly. Cheers WEAVER, Simon wrote: */Hi/* */what I understand is, if you use have a Catalog Backup Tape, you can use BPRECOVER onto the new Server, providing the Server name is correct./* *//* */There is an unofficial method to recovering the data to a different server, but not sure if you want to go down this route, and I do not know if Symantec would like it!/* *//* */but I hear it is possible from their consultants/* /Regards/ /Simon Weaver *3rd Line Technical Support Windows Domain Administrator*/ /EADS Astrium Limited, B32AA IM (DCS)/ /Anchorage Road, Portsmouth, PO3 5PU/ /Email: //[EMAIL PROTECTED]/ mailto:[EMAIL PROTECTED] -Original Message- *From:* Kathy Falakfarsa [mailto:[EMAIL PROTECTED] *Sent:* 05 May 2006 19:49 *To:* veritas-bu@mailman.eng.auburn.edu *Subject:* [Veritas-bu] Export and Import NetBackup configuration Hello, Does anyone know, if I can Export the NetBackup configuration from an existing NetBackup server and Import it to a new server on another site? NetBackup: 5.0 with MP2 OS: Windows 2003 Ent. SP1 Thanks This email is for the intended addressee only. If you have received it in error then you must not use, retain, disseminate or otherwise deal with it. Please notify the sender by return email. The views of the author may not necessarily constitute the views of EADS Astrium Limited. Nothing in this email shall bind EADS Astrium Limited in any contract or obligation. EADS Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
RE: [Veritas-bu] Export and Import NetBackup configuration
Title: Message Hi what I understand is, if you use have a Catalog Backup Tape, you can use BPRECOVER onto the new Server, providing the Server name is correct. There is an unofficial method to recovering the data to a different server, but not sure if you want to go down this route, and I do not know if Symantec would like it! but I hear it is possible from their consultants Regards Simon Weaver3rd Line Technical SupportWindows Domain Administrator EADS Astrium Limited, B32AA IM (DCS)Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message-From: Kathy Falakfarsa [mailto:[EMAIL PROTECTED] Sent: 05 May 2006 19:49To: veritas-bu@mailman.eng.auburn.eduSubject: [Veritas-bu] Export and Import NetBackup configuration Hello, Does anyone know, if I can Export the NetBackup configuration from an existing NetBackup server and Import it to a new server on another site? NetBackup: 5.0 with MP2 OS: Windows 2003 Ent. SP1 Thanks This email is for the intended addressee only. If you have received it in error then you must not use, retain, disseminate or otherwise deal with it. Please notify the sender by return email. The views of the author may not necessarily constitute the views of EADS Astrium Limited. Nothing in this email shall bind EADS Astrium Limited in any contract or obligation. EADS Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England