Versions of VCS/GAB/LLT must be the same within a cluster.
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Weber,
Klaus
Sent: Monday, April 16, 2007 4:04 AM
To: veritas-ha@mailman.eng.auburn.edu
Subject: [Veritas-ha] replacing nodes with newer Veritas VCS
I've set up a proxy resource that references a NIC
resource in another service group. The NIC resource
is online, but the proxy resource shows Online|status
unknown.
What does this mean in a Proxy resource? And is there
any way to clear the unknown status? This is on a
live Oracle cluster so
Yes, with the same priorities.
--- Jim Senicka [EMAIL PROTECTED] wrote:
Are the system lists for both service groups the
same?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
On Behalf Of Fred
Grieco
Sent: Monday, April 16, 2007 9:08 AM
To:
Here are the snipets from the main.cf. There are
three SGs, one with the actual NIC resource and two
with proxies. Both proxies show the online status
unknown state.
group ClusterService (
SystemList = { pa-ocsun-01 = 0, pa-ocsun-02 =
1 }
AutoStartList = { pa-ocsun-01,
The actual NIC is not enabled, so the Proxy cannot probe. (at least that
is my first thought here)
-Original Message-
From: Fred Grieco [mailto:[EMAIL PROTECTED]
Sent: Monday, April 16, 2007 11:29 AM
To: Jim Senicka; veritas-ha@mailman.eng.auburn.edu
Subject: RE: [Veritas-ha] Proxy
Ugh... I didn't see that. That solved the problem.
Thanks,
Fred
--- Jim Senicka [EMAIL PROTECTED] wrote:
The actual NIC is not enabled, so the Proxy cannot
probe. (at least that
is my first thought here)
-Original Message-
From: Fred Grieco [mailto:[EMAIL PROTECTED]
Sent:
This started when I copied the resource from another
service group.
As an aside, is there a reason why resources are
defaulted to disabled and critical when they are
created or copied?
--- Fred Grieco [EMAIL PROTECTED] wrote:
Ugh... I didn't see that. That solved the problem.
Thanks,
Yes:
Enabled defaults to 0, because until you have the attributes for a
resource configured the monitor will almost surely fail because it
doesn't have sufficient information to check the status, and this is
extremely inconvenient while you are trying to configure the resource.
In the period
One other reason for not Enabled: some resources run a Open entry
point when you enable them to create some structure in memory. If all
attributes are not sec correctly, such as when creating resources from
the command line, the structure would be incorrectly built and then
would not come online.
