Andrey, After speaking to a couple of developers, they think this is likely fixed by etrack 1416931 (sun id 6747492) which has been fixed and checked in.
Regards, Scott -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andrey Dmitriev Sent: Thursday, October 16, 2008 10:52 AM To: veritas-vx@mailman.eng.auburn.edu Subject: Re: [Veritas-vx] Vxconfig doesn't start on reboot after patching Checked there. Problem was there was a VXVM5.0_UPGRADE (or similar) marker file in / (root) Thank you Veritas for logging this somewhere and not causing folks hours trying to figure it out. (sarcasm). -----Original Message----- From: Bryan Bahnmiller [mailto:[EMAIL PROTECTED] Sent: Thursday, October 16, 2008 1:46 PM To: Andrey Dmitriev Subject: Re: [Veritas-vx] Vxconfig doesn't start on reboot after patching Andrey, I ran into this recently too. From the support guys I got: If vxconfigd isn't starting on boot up, check the following: cd /etc/vx/reconfig.d/state.d If there is a file "install-db" there, delete it. This gets put there by the installation program if the vx configuration is not done during installation. The vx configuration will be built correctly on the next reboot, or by the following command. To restart vxconfigd and rebuild the Vx database: vxconfigd -k -m enable Bryan Andrey Dmitriev wrote: > This was a fresh install of 5.0 with Mp1 applies on top, and MP1_R5 on top of that. > I run vxinstall, it starts up just fine, but doesn't start up on reboot. > > Where do I look. > > Thnks. > > _______________________________________________ > Veritas-vx maillist - Veritas-vx@mailman.eng.auburn.edu > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-vx > > _______________________________________________ Veritas-vx maillist - Veritas-vx@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-vx _______________________________________________ Veritas-vx maillist - Veritas-vx@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-vx