Re: [PATCH v11] virtio-net: add Max MTU configuration field

2016-09-19 Thread Michael S. Tsirkin
On Mon, Sep 19, 2016 at 11:10:26AM -0400, Aaron Conole wrote:
> It is helpful for a host to indicate it's MTU to be set on guest NICs
> other than the assumed 1500 byte value.  This helps in situations where
> the host network is using Jumbo Frames, or aiding in PMTU discovery by
> configuring a homogenous network.  It is also helpful for sizing receive
> buffers correctly.
> 
> The change adds a new field to configuration area of network
> devices.  It will be used to pass a maximum MTU from the device to
> the driver.  This will be used by the driver as a maximum value for
> packet sizes during transmission, without segmentation offloading.
> 
> In addition, in order to support backward and forward compatibility,
> we introduce a new feature bit called VIRTIO_NET_F_MTU.
> 
> VIRTIO-152
> Signed-off-by: Aaron Conole 
> Cc: Victor Kaplansky 
> Reviewed-by: Hannes Reiencke 
> Acked-by: Michael S. Tsirkin 
> Acked-by: Maxime Coquelin 
> ---
>Note: should this proposal be accepted and approved, one or more
>claims disclosed to the TC admin and listed on the Virtio TC
>IPR page https://www.oasis-open.org/committees/virtio/ipr.php
>might become Essential Claims.
> 
> v1:
> This is an attempt at continuing the work done by Victor Kaplansky on
> mtu negiotiation for virtio-net devices. It attempts to pick up from
> https://lists.oasis-open.org/archives/virtio-dev/201508/msg7.html
> and is just a minor blurb from the first patch along with the 2nd patch
> from the series, and some of the feedback integrated.
> 
> v2:
> Rephrase and provide a mechanism for guest->host and host->guest
> communication through a driver read-only and driver write-only field.
> 
> v3:
> Converted to just support initial MTU. Guest->host and Host->guest MTU
> changes are outside the scope of this change.
> 
> v4:
> Removed references to 'initial', since that condition cannot be tested.
> Simply state that if the driver will use the mtu field, it must
> negotiate the feature bit, and if not, it must not.
> 
> v5:
> After feedback from Michael S. Tsirkin
> 
> v6:
> Bit has to change to bit 25 due to an undocumented bit 24 being taken.
> 
> v7:
> Partial rewrite with feedback from MST.  Additional conformance statements
> added.
> 
> v8:
> Clarified the new conformance statements.
> 
> v9:
> Updated the commit log for correctness.  Added ACKs from
> Michael S. Tsirkin, and Maxime Coquelin.  Included the virtio
> issue id.
> 
> v10:
> Update the conformance statement wordings from previous 'offered' form
> to 'succesfully negotiated' form.
> 
> v11:
> Clarified size w.r.t. MTU - buffer sizes must also add extra space for 
> ethernet
> headers.  Also updated the feature bit description.
> 
>  content.tex | 37 +
>  1 file changed, 37 insertions(+)
> 
> diff --git a/content.tex b/content.tex
> index 4b45678..45b94c6 100644
> --- a/content.tex
> +++ b/content.tex
> @@ -3049,6 +3049,11 @@ features.
>  \item[VIRTIO_NET_F_CTRL_GUEST_OFFLOADS (2)] Control channel offloads
>  reconfiguration support.
>  
> +\item[VIRTIO_NET_F_MTU(3)] Device maximum MTU reporting is supported. If
> +offered by the device, device advises driver about the value of
> +its maximum MTU. If negotiated, the driver uses \field{mtu} as
> +the maximum MTU value.
> +
>  \item[VIRTIO_NET_F_MAC (5)] Device has given MAC address.
>  
>  \item[VIRTIO_NET_F_GUEST_TSO4 (7)] Driver can receive TSOv4.
> @@ -3140,11 +3145,16 @@ of each of transmit and receive virtqueues 
> (receiveq1\ldots receiveqN
>  and transmitq1\ldots transmitqN respectively) that can be configured once 
> VIRTIO_NET_F_MQ
>  is negotiated.
>  
> +The following driver-read-only field, \field{mtu} only exists if
> +VIRTIO_NET_F_MTU is set. This field specifies the maximum MTU for the driver 
> to
> +use.
> +
>  \begin{lstlisting}
>  struct virtio_net_config {
>  u8 mac[6];
>  le16 status;
>  le16 max_virtqueue_pairs;
> +le16 mtu;
>  };
>  \end{lstlisting}
>  
> @@ -3153,6 +3163,23 @@ struct virtio_net_config {
>  The device MUST set \field{max_virtqueue_pairs} to between 1 and 0x8000 
> inclusive,
>  if it offers VIRTIO_NET_F_MQ.
>  
> +The device MUST set \field{mtu} to between 68 and 65535 inclusive,
> +if it offers VIRTIO_NET_F_MTU.
> +
> +The device SHOULD set \field{mtu} to at least 1280, if it offers
> +VIRTIO_NET_F_MTU.
> +
> +The device MUST NOT modify \field{mtu} once it has been set.
> +
> +The device MUST NOT pass received packets that exceed \field{mtu} (plus low
> +level ethernet header length) size with \field{gso_type} NONE or ECN
> +after VIRTIO_NET_F_MTU has been successfully negotiated.
> +
> +The device MUST forward transmitted packets of up to \field{mtu} (plus low
> +level ethernet header length) size with \field{gso_type} NONE or ECN, and do
> +so without fragmentation, after VIRTIO_NET_F_MTU 

Re: [virtio-dev] [PATCH v11] virtio-net: add Max MTU configuration field

2016-09-19 Thread Michael S. Tsirkin
On Mon, Sep 19, 2016 at 01:02:03PM -0400, Aaron Conole wrote:
> Cornelia Huck  writes:
> 
> > On Mon, 19 Sep 2016 11:10:26 -0400
> > Aaron Conole  wrote:
> >
> >> @@ -3165,6 +3192,16 @@ If the driver does not negotiate the
> >> VIRTIO_NET_F_STATUS feature, it SHOULD
> >>  assume the link is active, otherwise it SHOULD read the link status from
> >>  the bottom bit of \field{status}.
> >> 
> >> +A driver SHOULD negotiate VIRTIO_NET_F_MTU if the device offers it.
> >> +
> >> +If the driver negotiates VIRTIO_NET_F_MTU, it MUST supply enough receive
> >> +buffers of size \field{mtu} (plus low level ethernet header length) to be
> >> +able to receive at least one receive packet with \field{gso_type} NONE or 
> >> ECN.
> >> +
> >> +If the driver negotiates VIRTIO_NET_F_MTU, it MUST NOT transmit packets of
> >> +size exceeding the value of \field{mtu} (plus low level ethernet header 
> >> length)
> >> +with \field{gso_type} NONE or ECN
> >
> > Missing period.
> 
> D'oh!
> 
> Michael,
>   Is this something that requires a new spin of the patch to
> correct?  If so, I'll add Cornelia's ACK and repost today.

I posted a comment too :(. If you can do it, I think iterating quickly
is a good idea, yes.


> >> +
> >>  \subsubsection{Legacy Interface: Device configuration
> >> layout}\label{sec:Device Types / Network Device / Device
> >> configuration layout / Legacy Interface: Device configuration
> >> layout}
> >>  \label{sec:Device Types / Block Device / Feature bits / Device
> >> configuration layout / Legacy Interface: Device configuration
> >> layout}
> >>  When using the legacy interface, transitional devices and drivers
> >
> > Otherwise,
> >
> > Acked-by: Cornelia Huck 
> >
> >
___
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization


Re: [virtio-dev] [PATCH v11] virtio-net: add Max MTU configuration field

2016-09-19 Thread Aaron Conole
Cornelia Huck  writes:

> On Mon, 19 Sep 2016 11:10:26 -0400
> Aaron Conole  wrote:
>
>> @@ -3165,6 +3192,16 @@ If the driver does not negotiate the
>> VIRTIO_NET_F_STATUS feature, it SHOULD
>>  assume the link is active, otherwise it SHOULD read the link status from
>>  the bottom bit of \field{status}.
>> 
>> +A driver SHOULD negotiate VIRTIO_NET_F_MTU if the device offers it.
>> +
>> +If the driver negotiates VIRTIO_NET_F_MTU, it MUST supply enough receive
>> +buffers of size \field{mtu} (plus low level ethernet header length) to be
>> +able to receive at least one receive packet with \field{gso_type} NONE or 
>> ECN.
>> +
>> +If the driver negotiates VIRTIO_NET_F_MTU, it MUST NOT transmit packets of
>> +size exceeding the value of \field{mtu} (plus low level ethernet header 
>> length)
>> +with \field{gso_type} NONE or ECN
>
> Missing period.

D'oh!

Michael,
  Is this something that requires a new spin of the patch to
correct?  If so, I'll add Cornelia's ACK and repost today.

>> +
>>  \subsubsection{Legacy Interface: Device configuration
>> layout}\label{sec:Device Types / Network Device / Device
>> configuration layout / Legacy Interface: Device configuration
>> layout}
>>  \label{sec:Device Types / Block Device / Feature bits / Device
>> configuration layout / Legacy Interface: Device configuration
>> layout}
>>  When using the legacy interface, transitional devices and drivers
>
> Otherwise,
>
> Acked-by: Cornelia Huck 
>
>
___
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization


Re: [virtio-dev] [PATCH v11] virtio-net: add Max MTU configuration field

2016-09-19 Thread Cornelia Huck
On Mon, 19 Sep 2016 11:10:26 -0400
Aaron Conole  wrote:

> @@ -3165,6 +3192,16 @@ If the driver does not negotiate the 
> VIRTIO_NET_F_STATUS feature, it SHOULD
>  assume the link is active, otherwise it SHOULD read the link status from
>  the bottom bit of \field{status}.
> 
> +A driver SHOULD negotiate VIRTIO_NET_F_MTU if the device offers it.
> +
> +If the driver negotiates VIRTIO_NET_F_MTU, it MUST supply enough receive
> +buffers of size \field{mtu} (plus low level ethernet header length) to be
> +able to receive at least one receive packet with \field{gso_type} NONE or 
> ECN.
> +
> +If the driver negotiates VIRTIO_NET_F_MTU, it MUST NOT transmit packets of
> +size exceeding the value of \field{mtu} (plus low level ethernet header 
> length)
> +with \field{gso_type} NONE or ECN

Missing period.

> +
>  \subsubsection{Legacy Interface: Device configuration 
> layout}\label{sec:Device Types / Network Device / Device configuration layout 
> / Legacy Interface: Device configuration layout}
>  \label{sec:Device Types / Block Device / Feature bits / Device configuration 
> layout / Legacy Interface: Device configuration layout}
>  When using the legacy interface, transitional devices and drivers

Otherwise,

Acked-by: Cornelia Huck 

___
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization


[PATCH v11] virtio-net: add Max MTU configuration field

2016-09-19 Thread Aaron Conole
It is helpful for a host to indicate it's MTU to be set on guest NICs
other than the assumed 1500 byte value.  This helps in situations where
the host network is using Jumbo Frames, or aiding in PMTU discovery by
configuring a homogenous network.  It is also helpful for sizing receive
buffers correctly.

The change adds a new field to configuration area of network
devices.  It will be used to pass a maximum MTU from the device to
the driver.  This will be used by the driver as a maximum value for
packet sizes during transmission, without segmentation offloading.

In addition, in order to support backward and forward compatibility,
we introduce a new feature bit called VIRTIO_NET_F_MTU.

VIRTIO-152
Signed-off-by: Aaron Conole 
Cc: Victor Kaplansky 
Reviewed-by: Hannes Reiencke 
Acked-by: Michael S. Tsirkin 
Acked-by: Maxime Coquelin 
---
   Note: should this proposal be accepted and approved, one or more
   claims disclosed to the TC admin and listed on the Virtio TC
   IPR page https://www.oasis-open.org/committees/virtio/ipr.php
   might become Essential Claims.

v1:
This is an attempt at continuing the work done by Victor Kaplansky on
mtu negiotiation for virtio-net devices. It attempts to pick up from
https://lists.oasis-open.org/archives/virtio-dev/201508/msg7.html
and is just a minor blurb from the first patch along with the 2nd patch
from the series, and some of the feedback integrated.

v2:
Rephrase and provide a mechanism for guest->host and host->guest
communication through a driver read-only and driver write-only field.

v3:
Converted to just support initial MTU. Guest->host and Host->guest MTU
changes are outside the scope of this change.

v4:
Removed references to 'initial', since that condition cannot be tested.
Simply state that if the driver will use the mtu field, it must
negotiate the feature bit, and if not, it must not.

v5:
After feedback from Michael S. Tsirkin

v6:
Bit has to change to bit 25 due to an undocumented bit 24 being taken.

v7:
Partial rewrite with feedback from MST.  Additional conformance statements
added.

v8:
Clarified the new conformance statements.

v9:
Updated the commit log for correctness.  Added ACKs from
Michael S. Tsirkin, and Maxime Coquelin.  Included the virtio
issue id.

v10:
Update the conformance statement wordings from previous 'offered' form
to 'succesfully negotiated' form.

v11:
Clarified size w.r.t. MTU - buffer sizes must also add extra space for ethernet
headers.  Also updated the feature bit description.

 content.tex | 37 +
 1 file changed, 37 insertions(+)

diff --git a/content.tex b/content.tex
index 4b45678..45b94c6 100644
--- a/content.tex
+++ b/content.tex
@@ -3049,6 +3049,11 @@ features.
 \item[VIRTIO_NET_F_CTRL_GUEST_OFFLOADS (2)] Control channel offloads
 reconfiguration support.
 
+\item[VIRTIO_NET_F_MTU(3)] Device maximum MTU reporting is supported. If
+offered by the device, device advises driver about the value of
+its maximum MTU. If negotiated, the driver uses \field{mtu} as
+the maximum MTU value.
+
 \item[VIRTIO_NET_F_MAC (5)] Device has given MAC address.
 
 \item[VIRTIO_NET_F_GUEST_TSO4 (7)] Driver can receive TSOv4.
@@ -3140,11 +3145,16 @@ of each of transmit and receive virtqueues 
(receiveq1\ldots receiveqN
 and transmitq1\ldots transmitqN respectively) that can be configured once 
VIRTIO_NET_F_MQ
 is negotiated.
 
+The following driver-read-only field, \field{mtu} only exists if
+VIRTIO_NET_F_MTU is set. This field specifies the maximum MTU for the driver to
+use.
+
 \begin{lstlisting}
 struct virtio_net_config {
 u8 mac[6];
 le16 status;
 le16 max_virtqueue_pairs;
+le16 mtu;
 };
 \end{lstlisting}
 
@@ -3153,6 +3163,23 @@ struct virtio_net_config {
 The device MUST set \field{max_virtqueue_pairs} to between 1 and 0x8000 
inclusive,
 if it offers VIRTIO_NET_F_MQ.
 
+The device MUST set \field{mtu} to between 68 and 65535 inclusive,
+if it offers VIRTIO_NET_F_MTU.
+
+The device SHOULD set \field{mtu} to at least 1280, if it offers
+VIRTIO_NET_F_MTU.
+
+The device MUST NOT modify \field{mtu} once it has been set.
+
+The device MUST NOT pass received packets that exceed \field{mtu} (plus low
+level ethernet header length) size with \field{gso_type} NONE or ECN
+after VIRTIO_NET_F_MTU has been successfully negotiated.
+
+The device MUST forward transmitted packets of up to \field{mtu} (plus low
+level ethernet header length) size with \field{gso_type} NONE or ECN, and do
+so without fragmentation, after VIRTIO_NET_F_MTU has been successfully
+negotiated.
+
 \drivernormative{\subsubsection}{Device configuration layout}{Device Types / 
Network Device / Device configuration layout}
 
 A driver SHOULD negotiate VIRTIO_NET_F_MAC if the device offers it.
@@ -3165,6 +3192,16 @@ If the driver does not negotiate the VIRTIO_NET_F_STATUS 
feature, it