Re: [RFC 0/3] virtio: NUMA-aware memory allocation
On Mon, Jun 29, 2020 at 11:28:41AM -0400, Michael S. Tsirkin wrote: > On Mon, Jun 29, 2020 at 10:26:46AM +0100, Stefan Hajnoczi wrote: > > On Sun, Jun 28, 2020 at 02:34:37PM +0800, Jason Wang wrote: > > > > > > On 2020/6/25 下午9:57, Stefan Hajnoczi wrote: > > > > These patches are not ready to be merged because I was unable to > > > > measure a > > > > performance improvement. I'm publishing them so they are archived in > > > > case > > > > someone picks up this work again in the future. > > > > > > > > The goal of these patches is to allocate virtqueues and driver state > > > > from the > > > > device's NUMA node for optimal memory access latency. Only guests with > > > > a vNUMA > > > > topology and virtio devices spread across vNUMA nodes benefit from > > > > this. In > > > > other cases the memory placement is fine and we don't need to take NUMA > > > > into > > > > account inside the guest. > > > > > > > > These patches could be extended to virtio_net.ko and other devices in > > > > the > > > > future. I only tested virtio_blk.ko. > > > > > > > > The benchmark configuration was designed to trigger worst-case NUMA > > > > placement: > > > > * Physical NVMe storage controller on host NUMA node 0 > > It's possible that numa is not such a big deal for NVMe. > And it's possible that bios misconfigures ACPI reporting NUMA placement > incorrectly. > I think that the best thing to try is to use a ramdisk > on a specific numa node. Using ramdisk is an interesting idea, thanks. Stefan signature.asc Description: PGP signature ___ Virtualization mailing list Virtualization@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [RFC 0/3] virtio: NUMA-aware memory allocation
On Mon, Jun 29, 2020 at 10:26:46AM +0100, Stefan Hajnoczi wrote: > On Sun, Jun 28, 2020 at 02:34:37PM +0800, Jason Wang wrote: > > > > On 2020/6/25 下午9:57, Stefan Hajnoczi wrote: > > > These patches are not ready to be merged because I was unable to measure a > > > performance improvement. I'm publishing them so they are archived in case > > > someone picks up this work again in the future. > > > > > > The goal of these patches is to allocate virtqueues and driver state from > > > the > > > device's NUMA node for optimal memory access latency. Only guests with a > > > vNUMA > > > topology and virtio devices spread across vNUMA nodes benefit from this. > > > In > > > other cases the memory placement is fine and we don't need to take NUMA > > > into > > > account inside the guest. > > > > > > These patches could be extended to virtio_net.ko and other devices in the > > > future. I only tested virtio_blk.ko. > > > > > > The benchmark configuration was designed to trigger worst-case NUMA > > > placement: > > > * Physical NVMe storage controller on host NUMA node 0 It's possible that numa is not such a big deal for NVMe. And it's possible that bios misconfigures ACPI reporting NUMA placement incorrectly. I think that the best thing to try is to use a ramdisk on a specific numa node. > > > * IOThread pinned to host NUMA node 0 > > > * virtio-blk-pci device in vNUMA node 1 > > > * vCPU 0 on host NUMA node 1 and vCPU 1 on host NUMA node 0 > > > * vCPU 0 in vNUMA node 0 and vCPU 1 in vNUMA node 1 > > > > > > The intent is to have .probe() code run on vCPU 0 in vNUMA node 0 (host > > > NUMA > > > node 1) so that memory is in the wrong NUMA node for the virtio-blk-pci > > > devic= > > > e. > > > Applying these patches fixes memory placement so that virtqueues and > > > driver > > > state is allocated in vNUMA node 1 where the virtio-blk-pci device is > > > located. > > > > > > The fio 4KB randread benchmark results do not show a significant > > > improvement: > > > > > > Name IOPS Error > > > virtio-blk42373.79 =C2=B1 0.54% > > > virtio-blk-numa 42517.07 =C2=B1 0.79% > > > > > > I remember I did something similar in vhost by using page_to_nid() for > > descriptor ring. And I get little improvement as shown here. > > > > Michael reminds that it was probably because all data were cached. So I > > doubt if the test lacks sufficient stress on the cache ... > > Yes, that sounds likely. If there's no real-world performance > improvement then I'm happy to leave these patches unmerged. > > Stefan Well that was for vhost though. This is virtio, which is different. Doesn't some benchmark put pressure on the CPU cache? I kind of feel there should be a difference, and the fact there isn't means there's some other bottleneck somewhere. Might be worth figuring out. -- MST ___ Virtualization mailing list Virtualization@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [RFC 0/3] virtio: NUMA-aware memory allocation
On Sun, Jun 28, 2020 at 02:34:37PM +0800, Jason Wang wrote: > > On 2020/6/25 下午9:57, Stefan Hajnoczi wrote: > > These patches are not ready to be merged because I was unable to measure a > > performance improvement. I'm publishing them so they are archived in case > > someone picks up this work again in the future. > > > > The goal of these patches is to allocate virtqueues and driver state from > > the > > device's NUMA node for optimal memory access latency. Only guests with a > > vNUMA > > topology and virtio devices spread across vNUMA nodes benefit from this. In > > other cases the memory placement is fine and we don't need to take NUMA into > > account inside the guest. > > > > These patches could be extended to virtio_net.ko and other devices in the > > future. I only tested virtio_blk.ko. > > > > The benchmark configuration was designed to trigger worst-case NUMA > > placement: > > * Physical NVMe storage controller on host NUMA node 0 > > * IOThread pinned to host NUMA node 0 > > * virtio-blk-pci device in vNUMA node 1 > > * vCPU 0 on host NUMA node 1 and vCPU 1 on host NUMA node 0 > > * vCPU 0 in vNUMA node 0 and vCPU 1 in vNUMA node 1 > > > > The intent is to have .probe() code run on vCPU 0 in vNUMA node 0 (host NUMA > > node 1) so that memory is in the wrong NUMA node for the virtio-blk-pci > > devic= > > e. > > Applying these patches fixes memory placement so that virtqueues and driver > > state is allocated in vNUMA node 1 where the virtio-blk-pci device is > > located. > > > > The fio 4KB randread benchmark results do not show a significant > > improvement: > > > > Name IOPS Error > > virtio-blk42373.79 =C2=B1 0.54% > > virtio-blk-numa 42517.07 =C2=B1 0.79% > > > I remember I did something similar in vhost by using page_to_nid() for > descriptor ring. And I get little improvement as shown here. > > Michael reminds that it was probably because all data were cached. So I > doubt if the test lacks sufficient stress on the cache ... Yes, that sounds likely. If there's no real-world performance improvement then I'm happy to leave these patches unmerged. Stefan signature.asc Description: PGP signature ___ Virtualization mailing list Virtualization@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [RFC 0/3] virtio: NUMA-aware memory allocation
On 2020/6/25 下午9:57, Stefan Hajnoczi wrote: These patches are not ready to be merged because I was unable to measure a performance improvement. I'm publishing them so they are archived in case someone picks up this work again in the future. The goal of these patches is to allocate virtqueues and driver state from the device's NUMA node for optimal memory access latency. Only guests with a vNUMA topology and virtio devices spread across vNUMA nodes benefit from this. In other cases the memory placement is fine and we don't need to take NUMA into account inside the guest. These patches could be extended to virtio_net.ko and other devices in the future. I only tested virtio_blk.ko. The benchmark configuration was designed to trigger worst-case NUMA placement: * Physical NVMe storage controller on host NUMA node 0 * IOThread pinned to host NUMA node 0 * virtio-blk-pci device in vNUMA node 1 * vCPU 0 on host NUMA node 1 and vCPU 1 on host NUMA node 0 * vCPU 0 in vNUMA node 0 and vCPU 1 in vNUMA node 1 The intent is to have .probe() code run on vCPU 0 in vNUMA node 0 (host NUMA node 1) so that memory is in the wrong NUMA node for the virtio-blk-pci devic= e. Applying these patches fixes memory placement so that virtqueues and driver state is allocated in vNUMA node 1 where the virtio-blk-pci device is located. The fio 4KB randread benchmark results do not show a significant improvement: Name IOPS Error virtio-blk42373.79 =C2=B1 0.54% virtio-blk-numa 42517.07 =C2=B1 0.79% I remember I did something similar in vhost by using page_to_nid() for descriptor ring. And I get little improvement as shown here. Michael reminds that it was probably because all data were cached. So I doubt if the test lacks sufficient stress on the cache ... Thanks Stefan Hajnoczi (3): virtio-pci: use NUMA-aware memory allocation in probe virtio_ring: use NUMA-aware memory allocation in probe virtio-blk: use NUMA-aware memory allocation in probe include/linux/gfp.h| 2 +- drivers/block/virtio_blk.c | 7 +-- drivers/virtio/virtio_pci_common.c | 16 drivers/virtio/virtio_ring.c | 26 +- mm/page_alloc.c| 2 +- 5 files changed, 36 insertions(+), 17 deletions(-) --=20 2.26.2 ___ Virtualization mailing list Virtualization@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/virtualization
[RFC 0/3] virtio: NUMA-aware memory allocation
These patches are not ready to be merged because I was unable to measure a performance improvement. I'm publishing them so they are archived in case someone picks up this work again in the future. The goal of these patches is to allocate virtqueues and driver state from the device's NUMA node for optimal memory access latency. Only guests with a vNUMA topology and virtio devices spread across vNUMA nodes benefit from this. In other cases the memory placement is fine and we don't need to take NUMA into account inside the guest. These patches could be extended to virtio_net.ko and other devices in the future. I only tested virtio_blk.ko. The benchmark configuration was designed to trigger worst-case NUMA placement: * Physical NVMe storage controller on host NUMA node 0 * IOThread pinned to host NUMA node 0 * virtio-blk-pci device in vNUMA node 1 * vCPU 0 on host NUMA node 1 and vCPU 1 on host NUMA node 0 * vCPU 0 in vNUMA node 0 and vCPU 1 in vNUMA node 1 The intent is to have .probe() code run on vCPU 0 in vNUMA node 0 (host NUMA node 1) so that memory is in the wrong NUMA node for the virtio-blk-pci devic= e. Applying these patches fixes memory placement so that virtqueues and driver state is allocated in vNUMA node 1 where the virtio-blk-pci device is located. The fio 4KB randread benchmark results do not show a significant improvement: Name IOPS Error virtio-blk42373.79 =C2=B1 0.54% virtio-blk-numa 42517.07 =C2=B1 0.79% Stefan Hajnoczi (3): virtio-pci: use NUMA-aware memory allocation in probe virtio_ring: use NUMA-aware memory allocation in probe virtio-blk: use NUMA-aware memory allocation in probe include/linux/gfp.h| 2 +- drivers/block/virtio_blk.c | 7 +-- drivers/virtio/virtio_pci_common.c | 16 drivers/virtio/virtio_ring.c | 26 +- mm/page_alloc.c| 2 +- 5 files changed, 36 insertions(+), 17 deletions(-) --=20 2.26.2 ___ Virtualization mailing list Virtualization@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/virtualization