FYI I am logged into their portal.
dw
On Fri, Oct 31, 2014 at 8:11 AM, Peter Beckman beck...@angryox.com wrote:
I noticed that at 7:48am EDT to 7:53am EDT, the Vitelity Portal and API
became unavailable, then back up, then back down again at 7:57am and is
still down.
This outage is not
I'm connecting a Adtran 904 to a Shoretel system for a voice only PRI.
Am I correct that a cross-over cable is needed and not a straight thru
cable? The IT vendor and I are having a small disagreement.
Thanks
David
--
[image: Ringfree Communications, Inc] http://ringfree.biz/
David Wessell /
If you are connecting it directly, then generally yes... a crossover. If
there's anything in-between the two, then generally the answer is no.
Fred Posner
The Palner Group, Inc.
http://www.palner.com (web)
+1-503-914-0999 (direct)
+1-954-472-2896 (fax)
On 10/31/2014 09:04 AM, David Wessell
If it's a 904 (not 904e) and you're using the DSX-1 port no crossover cable
required. Straighthrough it is.
On Friday, October 31, 2014, David Wessell da...@ringfree.biz wrote:
I'm connecting a Adtran 904 to a Shoretel system for a voice only PRI.
Am I correct that a cross-over cable is
So two different answers :)
It's a 904 connecting on the t1 0/2 DSX interface.
The main issue is that we keep getting D channel is DOWN.
I've run through every step in the Adtran troubleshooting guide (
Cross over cable won’t have anything to do with the D channel. If the T1 comes
up then the cable is fine. I.e. If both ends are getting timing framing
then the cable is good. For the D-channel down make sure you are setting both
ends to the correct ISDN mode, D channel on 23 and all
Straight through should be fine, that is all I’ve ever used coming out of an
Adtran.
remember, Cross-over Ethernet != Cross-over DS-1 cable
--
Matthew S. Crocker
President
Crocker Communications, Inc.
PO BOX 710
Greenfield, MA 01302-0710
E: matt...@crocker.com
P: (413) 746-2760
F: (413)
https://supportforums.adtran.com/thread/4027
suggests that the cable should be a T1 x-over cable, please note that T1 x-over
is not the same wiring as Ethernet x-over cable.
You can easily make a loopback cable/plug to test each side if needed. (just
google for t1 loopback wiring).
Regards
In Michigan, ATT is withdrawing TRS service as an offering early next
year. Each provider will be responsible to make their own arrangements
for TRS. Establishing a direct agreement with one of the national TRS
providers seems to be quite expensive. Is anyone able to offer this
service to us
Ditto
Collin Rose
DayStarr Communications
P: (989) 720-1000
F: (989) 720-6060
On Thu, Oct 30, 2014 at 11:54 PM, Paul Timmins p...@timmins.net wrote:
If anyone has contacts with cell providers that are interested in testing
out HD Voice interop (or hell anyone, especially if they're
On 10/31/14, 11:35 AM, Alexander Lopez wrote:
I have always done 1 to 4, 2 to 5.
But as I read below this is incorrect.
To add further confusion, google returns both as valid.
So what is the correct one?
Technically, 1-to-5 and 2-to-4 is correct but either should work. The
other way
11 matches
Mail list logo
