From: H LV
Sent: Saturday, April 1, 2017 7:51 AM
To: vortex-l@eskimo.com
Subject: Re: [Vo]:Sleeper from ICCF20
This conjecture also gives new meaning to the phrase 'cold fusion', if the
adjective 'cold' qualifies the output rather than the input. ;-)
Harry
On Sun, Mar 19, 2
What I am proposing is that the force of repulsion below the pico scale
decreases with decreasing velocity. However, if fusion does occur at very
low velocities then the associated binding energy required to keep nuclei
together will be smaller resulting in a delicate nucleus. Given the history
of
This conjecture also gives new meaning to the phrase 'cold fusion', if the
adjective 'cold' qualifies the output rather than the input. ;-)
Harry
On Sun, Mar 19, 2017 at 1:27 PM, Eric Walker wrote:
> On Sun, Mar 19, 2017 at 11:46 AM, H LV wrote:
>
> CoE would still be true, but there would
On Sun, Mar 19, 2017 at 8:56 PM, H LV wrote:
You mentioned "not-iron" before but can you clarify what you mean by this
> term? Thanks.
>
This is just a placeholder for whatever is converted to iron, e.g., 28Si +
28Si, since Narayanaswamy reports there being something creating iron
(which implies
On Sun, Mar 19, 2017 at 1:27 PM, Eric Walker wrote:
> On Sun, Mar 19, 2017 at 11:46 AM, H LV wrote:
>
> CoE would still be true, but there would be no mass into energy
>> conversion. Instead the iron would be slightly more massive than iron
>> produced by stellar fusion.
>>
>
> This suggestion
On Sun, Mar 19, 2017 at 5:13 PM, wrote:
> In reply to H LV's message of Sun, 19 Mar 2017 12:35:21 -0400:
> Hi Harry,
>
> In a fission reactor, the neutrons are normally slowed down to thermal
> temperatures before they react. This increases the reaction cross section,
> and
> allows the reactor
In reply to Frank Znidarsic's message of Sun, 19 Mar 2017 14:00:30 -0400:
Hi Frank,
[snip]
>Magnetic fields are not conservative. This includes the gravitomagnetic,
>electro-magnetic, and nuclear spin orbit magnetic. You are on the right track.
If magnetic fields are not conservative, then you
In reply to H LV's message of Sun, 19 Mar 2017 12:35:21 -0400:
Hi Harry,
In a fission reactor, the neutrons are normally slowed down to thermal
temperatures before they react. This increases the reaction cross section, and
allows the reactor to work. AFAIK the energy produced is as expected from
easier way to
conceptually introduce non-conservative forces into the nuclear domain.
Harry
-Original Message-
From: H LV
To: vortex-l
Sent: Sun, Mar 19, 2017 12:09 pm
Subject: Re: [Vo]:Sleeper from ICCF20
Hi Robin and Eric,
If the evidence about transmutation at the Indian
On Sun, Mar 19, 2017 at 11:46 AM, H LV wrote:
CoE would still be true, but there would be no mass into energy
> conversion. Instead the iron would be slightly more massive than iron
> produced by stellar fusion.
>
This suggestion has the benefit of being falsifiable. If you activate the
Coimb
On Sun, Mar 19, 2017 at 12:35 PM, Eric Walker wrote:
> Hi Harry,
>
> On Sun, Mar 19, 2017 at 11:09 AM, H LV wrote:
>
> If the evidence about transmutation at the Indian refinery is reliable
>> then one way to explain it is to imagine nuclear forces as being
>> fundamentally non-conservative and
Hi Harry,
On Sun, Mar 19, 2017 at 11:09 AM, H LV wrote:
If the evidence about transmutation at the Indian refinery is reliable then
> one way to explain it is to imagine nuclear forces as being fundamentally
> non-conservative and viewing their apparent conservative nature as an
> accurate appro
On Sat, Mar 18, 2017 at 12:26 PM, Eric Walker wrote:
> On Sat, Mar 18, 2017 at 9:11 AM, H LV wrote:
>
> What is the "bond" energy of a nut and bolt? Does the amount of energy
>> that is required to literally slam together a bolt and a nut correspond to
>> the energy required to screw them toget
Hi Robin and Eric,
If the evidence about transmutation at the Indian refinery is reliable then
one way to explain it is to imagine nuclear forces as being fundamentally
non-conservative and viewing their apparent conservative nature as an
accurate approximation in the high energy domain.
Another
In reply to H LV's message of Sat, 18 Mar 2017 10:11:20 -0400:
Hi Harry,
AFAIK the forces involved are all conservative. That means that the change in
energy is the same, irrespective of the path taken between endpoints. In short
the energy difference is the same whether the "nut and bolt" are sc
On Sat, Mar 18, 2017 at 9:11 AM, H LV wrote:
What is the "bond" energy of a nut and bolt? Does the amount of energy
> that is required to literally slam together a bolt and a nut correspond to
> the energy required to screw them together? Equations are poor guides if
> the situation is modeled i
On Tue, Mar 14, 2017 at 10:41 PM, Eric Walker wrote:
> On Tue, Mar 14, 2017 at 6:06 PM, H LV wrote:
>
> Does it necessarily require a violation of CoE?
>> It could be we don't know enough about nuclear matter to know how to
>> build or take apart nuclei with much less energy.
>>
>
> It's not nec
In reply to Eric Walker's message of Tue, 14 Mar 2017 22:23:24 -0500:
Hi,
This is why I used "enhanced/altered" in my previous post. The weak force
reactions would need to happen at the same time as the initial fusion reaction
so that the neutrinos could also carry away the fusion energy as well.
On Wed, Mar 15, 2017 at 8:17 AM, wrote:
Thinking outside the box is not a sin.
>
It's fine to think out of the box, if rigor is still applied and
hand-waving is not resorted to. In this case either we apply E = mc^2, or
we don't. Do you accept that this law applies in the case of the "excess
i
energy to spin energy
is, assuming angular momentum is conserved within the coherent system.
Thinking outside the box is not a sin.
Bob Cook
From: Eric Walker
Sent: Tuesday, March 14, 2017 8:23 PM
To: vortex-l@eskimo.com
Subject: Re: [Vo]:Sleeper from ICCF20
On Tue, Mar 14, 2017 at 10:12
On Tue, Mar 14, 2017 at 10:46 PM, Axil Axil wrote:
Holmlid is not dead yet; why not? Why is no radiation detected by Holmlid
> even when he has detected muons by the ton?
>
You make an excellent argument that Holmlid is NOT seeing muons! :)
Eric
Holmlid is not dead yet; why not? Why is no radiation detected by Holmlid
even when he has detected muons by the ton?
On Tue, Mar 14, 2017 at 11:16 PM, Eric Walker wrote:
> On Tue, Mar 14, 2017 at 9:48 PM, wrote:
>
> Fusion of 2 Si-28 to Fe 56 produces about 18 Mev excess mass energy, or
>> abo
On Tue, Mar 14, 2017 at 10:12 PM, Eric Walker wrote:
If we assume 1.3 tons excess iron following Narayanaswamy, then the amount
> of energy released into the environment for this first reaction would be:
>
> 1300 kg 56Fe = 23241.288159 mols 56Fe
> 23241.288159 mols (28Si + 28Si) = 46482.5
On Tue, Mar 14, 2017 at 9:48 PM, wrote:
Fusion of 2 Si-28 to Fe 56 produces about 18 Mev excess mass energy, or
> about 1 muon mass for for 18 fusion transitions. Muons that were to carry
> away mass may not be noticed.
>
If muons were to carry away that mass, they would quickly decay to more
b
On Mon, Mar 13, 2017 at 10:34 PM, wrote:
Two Si atoms gives a Ni atom, not an Fe atom. However if the formation of
> Ni56
> involved enhanced/altered electron capture to Fe56:-
>
> Ni56 => Co56 (2 MeV; half life 6 days)
>
> Co56 => Fe56 (4.6 MeV; half life 77 days)
>
> ...and ALL the energy were
Subject: Re: [Vo]:Sleeper from ICCF20
Does it necessarily require a violation of CoE?
It could be we don't know enough about nuclear matter to know how to build or
take apart nuclei with much less energy.
With a sledge hammer and a great deal of force a structure can be assembled or
broken
On Tue, Mar 14, 2017 at 6:06 PM, H LV wrote:
Does it necessarily require a violation of CoE?
> It could be we don't know enough about nuclear matter to know how to build
> or take apart nuclei with much less energy.
>
It's not necessarily a matter of COE; e.g., perhaps most of the energy was
qui
-l@eskimo.com
Subject: Re: [Vo]:Sleeper from ICCF20
In reply to Jones Beene's message of Sun, 12 Mar 2017 20:32:30 -0700:
Hi,
[snip]
>Yes - that's correct... the impossibility of fusing the starting
>elements into iron in a smelting operation comes from overcoming the
>Coulom
Pluto has an x-ray source - which is a surprise and it is in the range
of Rydberg energies from Millsean transitions from nickel and iron
200-300 eV.
Pluto is mostly ice, not dense - but could have iron/nickel debris from
meteorite impacts over the past few billion years.
https://www.resea
In reply to Jones Beene's message of Tue, 14 Mar 2017 18:04:14 -0700:
Hi,
[snip]
>
>Which brings us back to another source of heat for Earth's core.
>According to "America's Genius" the corona of our sun is in effect a
>giant factory for hydrinos, which get carried to earth via the solar
>wind,
Does anybody want to talk about where the internal heat inside Ceres and
Pluto comes from.
http://www.sciencemag.org/news/2015/07/pluto-alive-where-heat-coming
Pluto is alive—but where is the heat coming from?
On Tue, Mar 14, 2017 at 9:04 PM, Jones Beene wrote:
>
> Which brings us back to ano
Which brings us back to another source of heat for Earth's core.
According to "America's Genius" the corona of our sun is in effect a
giant factory for hydrinos, which get carried to earth via the solar
wind, where they are deposited in the oceans of earth, and being dense
and small, will eve
In reply to Jones Beene's message of Tue, 14 Mar 2017 17:20:26 -0700:
Hi,
[snip]
>
>Bob Higgins wrote:
>> It is interesting to consider the implications were some
>> nucleosynthesis taking place in this report. The steel mills are a
>> place on the surface of the Earth that most resembles the c
Bob Higgins wrote:
It is interesting to consider the implications were some
nucleosynthesis taking place in this report. The steel mills are a
place on the surface of the Earth that most resembles the core of the
Earth. For a long time, there has been speculations regarding the
source of th
It is interesting to consider the implications were some nucleosynthesis
taking place in this report. The steel mills are a place on the surface of
the Earth that most resembles the core of the Earth. For a long time,
there has been speculations regarding the source of the heat in the core of
pla
Does it necessarily require a violation of CoE?
It could be we don't know enough about nuclear matter to know how to build
or take apart nuclei with much less energy.
With a sledge hammer and a great deal of force a structure can be assembled
or broken down without knowing much about the nature of
On Mon, Mar 13, 2017 at 10:34 PM, wrote:
Two Si atoms gives a Ni atom, not an Fe atom. However if the formation of
> Ni56
> involved enhanced/altered electron capture to Fe56:-
>
> Ni56 => Co56 (2 MeV; half life 6 days)
>
> Co56 => Fe56 (4.6 MeV; half life 77 days)
>
> ...and ALL the energy were
In reply to 's message of Mon, 13 Mar 2017 10:56:07
-0700:
Hi,
[snip]
>The mass differential between 2 Si-28 (27.9769) and Fe-56 at a.m. of 55.93494
>is not very much. It may be that Si fusion is involved in the Indian steel
>plant.
>
>Bob Cook
Two Si atoms gives a Ni atom, not an Fe atom. How
In reply to Jones Beene's message of Sun, 12 Mar 2017 20:32:30 -0700:
Hi,
[snip]
>Yes - that's correct... the impossibility of fusing the starting
>elements into iron in a smelting operation comes from overcoming the
>Coulomb barrier, not from the final energy balance.
Correct.
>
>There is no c
My apologies, I quoted the wrong person. I meant to respond to this
comment from Bob:
The mass differential between 2 Si-28 (27.9769) and Fe-56 at a.m. of
> 55.93494 is not very much. It may be that Si fusion is involved in the
> Indian steel plant.
>
Eric
On Mon, Mar 13, 2017 at 9:57 PM, E
On Mon, Mar 13, 2017 at 2:25 PM, Axil Axil wrote:
If transmutation is always accompanied by meson production, then the area
> around the electric furnace might have an elevated background radiation
> profile. Four tone of transmutation would imply a huge number of muons
> produced on a daily basi
bobcook39...@gmail.com wrote:
The mass differential between 2 Si-28 (27.9769) and Fe-56 at a.m. of
55.93494 is not very much. It may be that Si fusion is involved in the
Indian steel plant.
Even though the mass is similar, the Coulomb barrier makes such a fusion
reaction unrealistic -- ev
ws 10
>
>
>
> *From: *Jones Beene
> *Sent: *Sunday, March 12, 2017 8:35 PM
> *To: *vortex-l@eskimo.com
> *Subject: *Re: [Vo]:Sleeper from ICCF20
>
>
>
> Yes - that's correct... the impossibility of fusing the starting elements
> into iron in a smelting opera
: [Vo]:Sleeper from ICCF20
Yes - that's correct... the impossibility of fusing the starting elements into
iron in a smelting operation comes from overcoming the Coulomb barrier, not
from the final energy balance.
There is no calcium at the start, but if there were - long before carbo
Yes - that's correct... the impossibility of fusing the starting
elements into iron in a smelting operation comes from overcoming the
Coulomb barrier, not from the final energy balance.
There is no calcium at the start, but if there were - long before carbon
and calcium could fuse (if this wer
On Sun, Mar 12, 2017 at 2:59 PM, Eric Walker wrote:
> On Sun, Mar 12, 2017 at 11:51 AM, H LV wrote:
>
> It seems to have become a truism that any change in the nuclear domain
>> must involve an energy change that is orders of magnitude greater than an
>> energy in the chemical domain. However,
In reply to Jones Beene's message of Sat, 11 Mar 2017 20:13:11 -0800:
Hi,
[snip]
>Eric,
>
>Converting anything into iron would be endothermic, and there is an
>electric arc to supply power, but hardly enough for transmutation ... of
>even a few ounces.
No, quite the reverse. Changing almost any
On Sun, Mar 12, 2017 at 6:01 PM, wrote:
One must look at all the mass involved, not just the Fe. Oxides and carbon
> mass may also be involved.
>
The iron in iron oxide would presumably not be included in the "excess
iron", because it's already iron. And the carbon would be a wash, existing
in
Eric—
One must look at all the mass involved, not just the Fe. Oxides and carbon
mass may also be involved.
Bob Cook
Sent from Mail for Windows 10
From: Eric Walker
Sent: Sunday, March 12, 2017 2:04 PM
To: vortex-l@eskimo.com
Subject: Re: [Vo]:Sleeper from ICCF20
Sent from my iPhone
On
Sent from my iPhone
> On Mar 12, 2017, at 14:33,
> wrote:
>
> The trueism suggested is based on two- bodied interactions where large energy
> releases are the norm.
The main difficulty in this case is not in the manner of any hypothetical
reaction pathway. It is in the amount of energy i
within the
many-bodied system. IIMHO this includes nuclear species changes that involve
aonly small changes in total potential; energy of the coherent system.
Bob Cook
From: Eric Walker
Sent: Sunday, March 12, 2017 12:04 PM
To: vortex-l@eskimo.com
Subject: Re: [Vo]:Sleeper from ICCF20
On Sun
On Sun, Mar 12, 2017 at 11:51 AM, H LV wrote:
It seems to have become a truism that any change in the nuclear domain
> must involve an energy change that is orders of magnitude greater than an
> energy in the chemical domain. However, based on my reading of nuclear
> isomers there are few known
It seems to have become a truism that any change in the nuclear domain
must involve an energy change that is orders of magnitude greater than an
energy in the chemical domain. However, based on my reading of nuclear
isomers there are few known instances where this truism does not hold.
Since there
4 tons of carbon electrodes would be a production problem. Plus the resulting
steel would have strange specifications—welding may be impossible—
Bob cook
Sent from Mail for Windows 10
From: Jones Beene
Sent: Saturday, March 11, 2017 11:44 PM
To: vortex-l@eskimo.com
Subject: Re: [Vo]:Sleeper
The amount that comes from electrode consumption might be too small to
account for the weight gain.
<<*Relationship Between Graphite Electrode Demand and EAF Steel
Production.* The
improved efficiency of electric arc furnaces has resulted in a decrease in
the average rate of consumption of graphit
On Sat, Mar 11, 2017 at 10:13 PM, Jones Beene wrote:
Converting anything into iron would be endothermic, and there is an
> electric arc to supply power, but hardly enough for transmutation ... of
> even a few ounces.
I agree entirely. Technically speaking, I suppose you could have iron as
an
Eric,
Converting anything into iron would be endothermic, and there is an
electric arc to supply power, but hardly enough for transmutation ... of
even a few ounces.
What they may overlooked is a monoclinic iron carbide which is 40%
carbon ... and which is a good and even an expected candida
On Sat, Mar 11, 2017 at 9:25 AM, Jones Beene wrote:
"The daily input of Si and Fe was 20.479 tons at his smelting plant, and
> the output was 24.75 tons. There was a daily excess of 4.27 tons of iron
> and silica."
A process that would produce 4 tons of iron from another element in one day
woul
From IE issue 131, now available online.
Good info on ICCF in this issue - most of which will be brought up in
later posts on dense hydrogen and iron catalyst.
A star of this issue, hidden in plain view, could be plain old IRON -
the metal.
Iron is a Mills catalyst and notably a part of the
59 matches
Mail list logo