Hi Richard,
Please check if leds_apu2 is loaded? Use command:
lsmod|grep leds
Regards,
Punky
On 6/16/2017 1:06 PM, Richard Warburton wrote:
Fresh install of Voyage 0.11.0, alas on startup I see the message:
/etc/init.d/voyage-util: 76: /etc/init.d/voyage-util: cannot create
/sys/class/leds
Hi Bolle,
Yes, your email got the leds fully working! Many thanks.
For anyone else following, the modules exist but aren't being loaded on
startup.
After editing /etc/modules as you suggested, I was able turn the leds on an
off but no heartbeat or timer etc.
Adding VOYAGE_SYSTEM_MODULES to vi /et
Thanks Andreas,
Voyage 0.11.0 explicitly says that it supports APU2 leds in the release
data (unless I'm reading it wrong), so I'm hoping it's a minor config issue.
If I have no luck, I might have a go with the sources you provide.
Thanks again.
On 16 June 2017 at 17:18, wrote:
> Hello Richar
Fresh install of Voyage 0.11.0, alas on startup I see the message:
/etc/init.d/voyage-util: 76: /etc/init.d/voyage-util: cannot create
/sys/class/leds/apu2:1/trigger: Directory nonexistent
/etc/init.d/voyage-util: 77: /etc/init.d/voyage-util: cannot create
/sys/class/leds/apu2:3/trigger: Directory