[Voyage-linux] Installation

Hello Punky, Is it possible to install Voyage MPD to a USB memory stick? I have a PC having a mSata and a SSD. When i compared the sound of USB stick with Msata i would find USB stick is better. I think that mSata is operating in high frequency that will make much noise. I'm looking forward to

Re: [Voyage-linux] Voyage 0.11.0 and APU2 no LEDs

Hi Bolle, Yes, your email got the leds fully working! Many thanks. For anyone else following, the modules exist but aren't being loaded on startup. After editing /etc/modules as you suggested, I was able turn the leds on an off but no heartbeat or timer etc. Adding VOYAGE_SYSTEM_MODULES to vi

Re: [Voyage-linux] Voyage 0.11.0 and APU2 no LEDs

Hi Richard, Please check if leds_apu2 is loaded? Use command: lsmod|grep leds Regards, Punky On 6/16/2017 1:06 PM, Richard Warburton wrote: Fresh install of Voyage 0.11.0, alas on startup I see the message: /etc/init.d/voyage-util: 76: /etc/init.d/voyage-util: cannot create

Re: [Voyage-linux] Voyage 0.11.0 and APU2 no LEDs

Thanks Andreas, Voyage 0.11.0 explicitly says that it supports APU2 leds in the release data (unless I'm reading it wrong), so I'm hoping it's a minor config issue. If I have no luck, I might have a go with the sources you provide. Thanks again. On 16 June 2017 at 17:18,

Re: [Voyage-linux] Voyage 0.11 and SDHC kernel/driver problem

Bit off topic, but I'd just like to say thanks to Erik for posting the fsck.ext2 fix. After following the instructions and running "update-initramfs -u", it now fixes any errors on startup. Hope it gets added to the next release! Thanks. -- Richard Warburton - MSc(Hons), PGDipSci, BE(Hons) +64