are still there
Best Rregards
Dave
发件人: Matthew Smith
发送时间: 2019年9月10日 21:54
收件人: shi dave
抄送: vpp-dev
主题: Re: [vpp-dev] vpp dpdk crypto performance testing (VPP 19.01)
The issue might be fixed if you upgrade to a newer version than 19.01 - see
https://gerrit.fd.io
Hi,
Using VPP+DPDK for Ipsec Security Gateway application, want to handle traffic
(7Gbps uplink & decrypt + 28Gbps downlink & encrypt ) with below configuration,
but there have many rx-miss errors in downlink interface, but the Vectors/Call
for ipsec & dpdk crypto node is very low (only 3~4),
Hi Sergio, Jitendra
Note that there is a bug in VPP device initialization where the scheduler needs
to appear before the slaves in the config (easy to workaround it).
could you help tell me how to resolve this issue, I also found the crypto
scheduler doesn't work, thanks!
Best Rregards
0/0/0/0
vpp# ip route add 173.2.0.0/24 via svti
Best Rregards
Dave
发件人: Neale Ranns (nranns)
发送时间: 2019年8月27日 15:18
收件人: shi dave ; vpp-dev@lists.fd.io
主题: Re: [vpp-dev] Add ip route without next-hop-address
Hi Dave,
As with all IP routing, you need
Best Rregards
Dave
发件人: Neale Ranns (nranns)
发送时间: 2019年8月23日 15:18
收件人: shi dave ; vpp-dev@lists.fd.io
主题: Re: 回复: 回复: 回复: [vpp-dev] Add ip route without next-hop-address
Hi Dave,
That flow would suggest the packet was correctly sent out of GigEth0/a/0 with
Dave
发件人: vpp-dev@lists.fd.io 代表 shi dave
发送时间: 2019年8月23日 15:03
收件人: Neale Ranns (nranns) ; vpp-dev@lists.fd.io
主题: 回复: 回复: [vpp-dev] Add ip route without next-hop-address
Hi Neale,
When routing to GigabitEthernet0/a/0, it could run into ipsec-output-ip4
-rewrite (GigabitEthernet0/b/0)
ipsec-output-ip4
dpdk-esp-encrypt
dpdk-crypto-input
ip4-lookup (dst 172.16.3.1)
ip4-rewrite (GigabitEthernet0/b/0)
ipsec-output-ip4 (by pass)
Best Rregards
Dave
发件人: Neale Ranns (nranns)
发送时间: 2019年8月23日 14:53
收件人: shi dave ; vpp
the packet from GigabitEthernet0/b/0 to
GigabitEthernet0/a/0, without send any ARP request?
Best Rregards
Dave
发件人: Neale Ranns (nranns)
发送时间: 2019年8月22日 22:03
收件人: shi dave ; vpp-dev@lists.fd.io
主题: Re: [vpp-dev] Add ip route without next-hop-address
Hi
Hi VPP Experts,
I got a route issue(VPP 19.01), need your suggestion, thanks a lot!
[cid:e8858049-107c-477f-ba58-05a6b20bdc30]
There have a ipsec tunnel between VM1 and VPP :
sa 1 spi 3693429 mode tunnel protocol esp
tunnel src 172.16.3.1 dst 172.16.3.15
sa 2 spi 3380458875 mode tunnel
