Re: [EXTERNAL] Re: Re: [csit-dev] [vpp-dev] A 404 error occurred in the process of sudo apt-get update. How to solve it?

We’re not able to give detailed basic linux support here. Are you following a guide that had you execute a step to install the packages? That will tell you which files it modified to add the repository lines. Somewhere in /etc/apt/sources.list.d/ Chris. From: 汤超 Sent:

[vpp-dev] hardware-interfaces not seen inside VPP

Hello, I see that my physical nic highlighted below is seen by vpp but somehow I do not see corresponding hardware interface TenGigabitEthernet9/0/0 in "show hardware-interfaces". How do I create this interface in VPP? Thanks, Jit vpp# show pci Address Sock VID:PID Link Speed

Re: [csit-dev] [vpp-dev] A 404 error occurred in the process of sudo apt-get update. How to solve it?

Yes, I found this problem, but how should I modify it? Is the etc/apt/source.list file modified? How should I modify it? My source file content： #deb cdrom:[Ubuntu 16.04.4 LTS _Xenial Xerus_ - Release amd64 (20180228)]/ xenial main restricted # See

Re: [vpp-dev] segfault due to movaps unaligned access

Quick update. I added the obvious ASSERT, and immediately found a couple of non-compliant data structures. With two (trivial) fixes, vpp makes it to the debug CLI prompt. I'm going to start looking at "make test-debug", to see how many additional issues we may encounter. D. -Original

Re: [vpp-dev] CentOS 7 build broken

Damn, Thought I had enough retries to get around these corner cases but here again 3 rounds of centos failures failed faster then virl failure then success so it ended up with a +1 that shouldn’t have been the case. Would not have been the case if the failure was also seen on ubuntu but this

[vpp-dev] CentOS 7 build broken

I see errors when trying to build from master on CentOS 7: /root/src/tnsr-pkgs/work/vpp/build-data/../src/vnet/vxlan/vxlan.c: In function vxlan_rewrite': /root/src/tnsr-pkgs/work/vpp/build-data/../src/vnet/vxlan/vxlan.c:224:3: error:missing braces around initializer [-Werror=missing-braces]

Re: [vpp-dev] Figure out u16 mapping in NAT API output

Many thanks Matus for the patch. I will add the changes and rebuild the code on my setup. Will let you know the results. Regards, Hamid. On Wed, May 2, 2018 at 1:02 PM, Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco) wrote: > https://gerrit.fd.io/r/#/c/12309/ >

[vpp-dev] Python API for specific VPP instance

Hi guys, How can I "connect" to a specific instance of VPP through the python API ? Each instance (together, they form a topology) is run as follow: sudo vpp unix { log /tmp/vpp1.log cli-listen /run/vpp/cli-vpp1.sock } api-segment { prefix vpp1 } plugins { plugin dpdk_plugin.so { disable } }

Re: [vpp-dev] Dynamically attach to a PCI device

Sorry Avi, Let me clarify what I meant. To the best of my knowledge, it is not supported with FD.io VPP + DPDK Plugin at this time. You can achieve something similar with FD.io VPP and AF_PACKET but it won't be fast. As you point out, DPDK does support hotput, so it is not a DPDK

Re: [vpp-dev] A 404 error occurred in the process of sudo apt-get update. How to solve it?

‘fd.io.ubuntu..main’ is not a valid URL – spot the double-dot. It’s missing the word ‘xenial’. Chris. From: vpp-dev@lists.fd.io On Behalf Of ?? Sent: Tuesday, May 1, 2018 22:41 To: vpp-dev Cc: csit-dev Subject: [EXTERNAL]

Re: [vpp-dev] problem in SRV6

Hi Jane, Could you share more details on your config/topology? All VPP releases after 17.07 are good to use SRv6. Thanks, Pablo. SRv6 documentation: https://docs.fd.io/vpp/18.07/srv6_doc.html https://wiki.fd.io/view/VPP/Segment_Routing_for_IPv6 From: on behalf of Jane

Re: [vpp-dev] Figure out u16 mapping in NAT API output

https://gerrit.fd.io/r/#/c/12309/ Matus From: Hamid Rasool <14mseesras...@seecs.edu.pk> Sent: Wednesday, May 2, 2018 7:24 AM To: Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco) Cc: vpp-dev@lists.fd.io Subject: Re: [vpp-dev] Figure out u16 mapping in NAT API

Re: [vpp-dev] Dynamically attach to a PCI device

Ray I know that with ovs-dpdk you can add/remove a dpdk interface (physical or vhost-user) on runtime Best Regards Avi > -Original Message- > From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Ray > Kinsella > Sent: Tuesday, 01 May, 2018 5:41 PM > To: Avi Cohen (A);

Re: [vpp-dev] Trying to build vpp on amd64 platform via qemu static library qemu-aarch64-static in Docker container

Hello Brian 1. I was able to natively compile VPP. 2. Cross-platform compilation: I will try that patch from Ole on my cross platform instance and/or check if mentioned patch from Ole is included in my build later and I will report the result. Thanks Stanislav -Original Message- From:

Re: [vpp-dev] how to apply a dpdk makefile patch?

BTW, Because I want to test the following DPDK patch in VPP. http://www.dpdk.org/dev/patchwork/patch/39154/ thanks Zhiyong From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Zhiyong Yang Sent: Wednesday, May 2, 2018 1:36 PM To: dmarion.li...@gmail.com Cc: vpp-dev@lists.fd.io