0 4.74e49.29
nat64-expire-worker-walk interrupt wa 40 0
0 1.08e40.00
发件人: "Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)"
<matfa...@cisco.com>
日期: 2018年1月5日 星期五
interface nat44 in TenGigabitEthernet83/0/0 out TenGigabitEthernet83/0/1
nat44 add address 3.3.3.5
发件人: "Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)"
<matfa...@cisco.com>
日期: 2018年1月2日 星期二 下午2:34
收件人: 李洪亮 <lihongli...@360.cn>
抄送: "vpp-dev@lists.fd.io&qu
In my case, using 2 workers configed in startup.conf
when using“set nat worker 0”, it works well;
when using “set nat worker 1”, the problem appeared just like using default nat
workers config ;
发件人:
日期: 2017年12月24日 星期日 下午10:40
收件人: "Matus Fabian -X (matfabia -
is-at 90:e2:ba:69:7a:41, length 46
发件人: 李洪亮 <lihongli...@360.cn>
日期: 2017年12月22日 星期五 下午11:35
收件人: "Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)"
<matfa...@cisco.com>
抄送: "vpp-dev@lists.fd.io" <vpp-dev@lists.fd.io>
主题: Re: The performance problem of
I find that when I use NAT , the ARP is abnormal;
AS, I use the 3.3.3.5 as the NAT pool address: nat44 add address 3.3.3.5
On target NIC(3.3.3.1), the tcpdump can capture the ARP request without reply:
23:21:57.783994 ARP, Request who-has 3.3.3.5 tell 3.3.3.1, length 28
发件人: 李洪亮 <lihon
I found that if use one working thread, the problem have resolved;
I think this is cause by multi-thread , the respond packets pass to other
threads;
在 2017年12月21日,下午9:23,Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at
Cisco) > 写道:
Hi,
There
d out2in) so
some packets pass NAT plugin. Do you see some packets on interfaces?
Matus
From: 李洪亮 [mailto:lihongli...@360.cn]
Sent: Thursday, December 21, 2017 2:17 PM
To: Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)
<matfa...@cisco.com<mailto:matfa...@cisco.com>>
10.16.81.205: 1 dynamic translations, 0 static translations
10.16.83.191: 2 dynamic translations, 0 static translations
发件人: "Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)"
<matfa...@cisco.com>
日期: 2017年12月21日 星期四 下午1:40
收件人: 李洪亮 <lihongli...@360.cn>
抄送: "vp
Hi All:
I want to use VPP NAT plugin as a typical SNAT .
(1.1.1.0/24)pkt_gen(2.2.2.1)|| (2.2.2.2)VPP(3.3.3.2)||(3.3.3.1)target|
the configuration of VPP is below:
vppctl set interface state TenGigabitEthernet81/0/0 up
vppctl set interface state TenGigabitEthernet81/0/1 up
vppctl set