Hi,
I have successfully installed a vserver on it's own partition and used
a vroot device to add the quota to it. It works but i have two issues:
1/ i cannot do repquota /, only repquota /dev/hdv1 work
2/ webmin 1.350 quota extention does not work with the setup
i have :
Versions:
Hi,
To have disk quotas it seems the best to have a partition for each
Vserver guests. But vhashify use hardlink and i think it does not cross
partition. What would be the best way to have vhashify AND quota on the
vserver ?
*Is there a way to implement "user/group quota" per VServer
Ben Green a écrit :
I put together some documentation for Psand.net about a vserver setup
I did for them. They release pretty much everything they do as open
source. They asked me to make it generic so that it could be put on
their website flakey.info (They release pretty much everything they
Chuck a écrit :
On Thursday 15 February 2007 07:52, ADNET Ghislain wrote:
i used a pre-made centos guest (bare bones) and had the same problem. i had to
manually download and install rpm and yum to get a workable system. i use
these centos4 and centos64 guests on a gentoo amd64 host and they
[EMAIL PROTECTED] a écrit :
Herbert Poetzl a écrit :
Greetings Community!
after a longer rc stage, to get rid of all the
minor issues, we proudly present the first release
of the new stable 2.2 branch, which includes all
the 'considered stable' features of the previous
devel branch (2.1.x) whic
hello,
I run vserver to isolate webserver from the real host. From time to
time i have a process than run wild and block everything. I cannot even
connect (ssh) to the Host. Which would be the more efficient way to
configure the system so that vservers cannot prevent the host to work
even if
is it possible to build a centos guest on a debian host ?
i cannot made it . i have setup a server using vyum and -d centos4 but i got a system so tiny that i havent any "yum"
or "rpm" or any package (not even vi) and anything i want to install fails. Is any centos guest user can share on how h
ok found,
dnat for "lo" goes by -t nat -A OUTPUT and not -t nat -A prostrouting :)
--
Cordialement,
Ghislain
smime.p7s
Description: S/MIME Cryptographic Signature
___
Vserver mailing list
Vserver@list.linux-vserver.org
http://list.linux-vserver.org/m
From what i got it seems that the traffic from host to guest goes by the lo interface. The logs indicate that it does
not DNAT from lo :
Feb 9 12:30:30 server kernel: OUTROUTEIN= OUT=lo SRC=my.pub.lic.ip DST=my.pub.lic.ip LEN=60 TOS=0x10 PREC=0x00 TTL=64
ID=14753 DF PROTO=TCP SPT=42145 DPT=8
Hello,
I have some trouble with the routing between host and guest. I have guest having a 10.x ip and a public ip different
from the host public IP. I have setup DNAT and SNAT between the 10.x and guest publicip and it works from outside but i
cannot telnet port 80 into my guest from the host
2.6.18.3-vs2.2.0-pre4 #4 SMP PREEMPT
util-vserver 0.30.211
Features:
CC: gcc, gcc (GCC) 3.3.5 (Debian 1:3.3.5-13)
CXX: g++, g++ (GCC) 3.3.5 (Debian 1:3.3.5-13)
CPPFLAGS: ''
CFLAGS: '-g -O2 -std=c99 -Wall -pedantic -W'
Hello,
If we want to build new box with vserver on them, what version
stable/dev/prepatch should we choose ? We know the kernel has seen
some major bug squeeze those last weeks and stable version is laggin a
little in kernel version. So what is the best choice about this ? should
we stick
i created a guest without giving the context at creation time. It does
not run so i tried to add a number in context but this does not help.
Any hint ? :)
mycomp01:/usr/local/etc/vservers/S1.myvserver01# more
/usr/local/etc/vservers/S1.myvserver01/context
10
mycomp01:/usr/local/etc/vservers/
This is great, i just started to look but this is refreshing to see this
website renewed and this simple thing seems bring new hope in the future :)
Thanks to the team for all their work on the vserver project !!
Cordialement,
Ghislain
smime.p7s
Description: S/MIME Cryptographic Signature
_
>
> Further hint: I've placed this as line in /etc/rc.d/rc.local on the
> host so it get's loaded already on boot, that makes it easier.
>
>
the sysctl.conf file seems more appropriate for this kind of settings,
see man page for syntax :)
regards,
Ghislain.
___
Hello there,
Does anyone has tested vserver with the lastest kernels :2.6.17.6. ?
Seems it should work but i am reluctant to try this on a production
system, anyone has experience in this ?
--
Cordialement,
Ghislain ADNET.
___
Vserver mailing list
V
thanks for the hint !!
> on sarge i use the packages from backports.org, versions 0.30.210 and
> 4.1.2. instructions for using backports.org are at
> http://backports.org/instructions.html.
>
>
___
Vserver mailing list
Vserver@list.linux-vserver.org
h
sorry to jump on the thread, just a little test : when you make the
vserver-util, do the "make check" worked for all tests ?
i have issue on the unify test on debian, perhaps you have something
related or a beecrypt issue ?
Cordialement,
Ghislain ADNET.
>>
> Thanks for the detailed explanation.
I will gladly do that if i knowed his email adress. In fact i looked at
the page but i do not see any way to contact him, now i know the name
of the author i searched on the 'hall of fame' page but this is not
spammer friendly so there is no adress :)
If you hear us Enrico ! Accept our respec
> No need for this, just surf to is and select another stylesheet from the
> list? ;)
> It's not that much trouble, and it's "instantly updated" :)
>
> Tom
>
>
yes but the "instant" effect is more to repell any non private joke
friendly person. Personnaly i do not find this funny but just
unre
no need for this, just take the source and change the css to the
"boring.css" and it's done ;)
the problem is updating this as the authors update the flower page !
Cordialement,
Ghislain ADNET.
AQUEOS.
> I thought about this:
>
> - open the weird (it's not great) flower page with Konqueror
> - for
Hi Herbert,
Thanks for the answer, i was starting to despair seing no one talking
on the list.
You know what, i tried man vserver, and i got nothing in it, it does
not even say "there is an help option".
So i "google is my brain"ed and found nothing satisfying. What i will
do is try to ga
ok, good news !
You can remember the caps used for this particular vserver , this will
save quite some time if you have it and i will try the instal and see if
i can update the wiki with my tests ?
Cordialement,
Ghislain ADNET.
ehab heikal a écrit :
> Yes I have 8 on a vserver. Just takes car
Hi,
I found a lot of place for constructing Vservers with vserver build.
But i am a little confused as i do not find anything about what are the
vserver build parameters and documentation.
I have searched the wiki, googled and such without success. Anyone can
give me a hand ?
I do not know i
Hi All,
I wanted to know if anyone had some success setting-up plesk 7.5 or 8
on a vserver ?
--
Cordialement,
Ghislain
___
Vserver mailing list
Vserver@list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver
this seems to do the trick ! Thanks a lot :)
Cordialement,
Ghislain ADNET.
AQUEOS.
Attention ! Pour toute demande de support
ou commande de domaine utilisez désormais:
http://support.aqueos.net.
AQUEOS
- Service Informatique
1, Rue Albert Einstein
77420 Champs s
Hi,
I am testing vserver and all works well for me but one thing. I have
a server with one public IP. I use vserver to have 2 vserver, one is
the prod one and the other is a test one. I start one after stopping
the other (they never runs at the same time). I have a problem in the
fact that
27 matches
Mail list logo
