On Fri, May 19, 2006 at 12:31:11PM -0400, GreatOak wrote: > Hello, > I'm new to this group but have been using VServers for about a year > now. > > Most of my experience has been fairly straight forward, for the > examples and don't deviate to much. I have setup about 6 host servers > mostly AMD based. > > Recently, I have been working to get this intel based system up and > running. I can get it up and running fine, the problem is the onboard > NIC (Marvel 88E8050) uses the sky2 module which is not included in > k2.6.14-3. I have tried rebuilding this system with a variety of > config changes atleast a dozen times to no avail. It wasn't till > recently that I discovered (through googling) that the problem was > this unsupported module in k2.6.14.
hmm, why not use a recent kernel (e.g. 2.6.16.16) which already includes the sky2 module? patches for linux-vserver can be found here: http://vserver.13thfloor.at/Experimental/patch-2.6.16.16-vs2.0.2-rc20.diff http://vserver.13thfloor.at/Experimental/patch-2.6.16.16-vs2.1.1-rc20.diff > Now that I know... I am posting to know how I can get VServers to run > on k2.6.9-34... OR which patch of VServers do I use to patch that > kernel. > > I have tried using the patch for k2.6.12 and k2.6.14 ... That was not > a good move. It compiled and lead me to false hope as it would not > load. > > Thank you for you time. HTH, Herbert > ~G > _______________________________________________ > Vserver mailing list > Vserver@list.linux-vserver.org > http://list.linux-vserver.org/mailman/listinfo/vserver _______________________________________________ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver