[Vyatta-users] Fractional T3 configuration?

2008-03-07 Thread Chad Hurley
Hi - 

 

Our ISP is providing a F-T3.  I am using the Sangoma A301 and need to
set the bandwidth used to 40300 but I can't find how to configure
this.  Does anyone have experience with this?

 

Thanks,

Chad

 

___
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users


Re: [Vyatta-users] Cluster heartbeat / change to ucast?

2008-03-05 Thread Chad Hurley
Thanks, again!

-Original Message-
From: Justin Fletcher [mailto:[EMAIL PROTECTED] 
Sent: Tuesday, March 04, 2008 2:07 PM
To: Chad Hurley
Cc: [EMAIL PROTECTED]
Subject: Re: [Vyatta-users] Cluster heartbeat / change to ucast?

Not yet, but it is one of the enhancements requested in bug 2730
(https://bugzilla.vyatta.com/show_bug.cgi?id=2730).  To keep it a
permanent setting,
you can modify the perl script that generates it; it's
/opt/vyatta/sbin/vyatta-update-cluster.pl
in VC4.

Best,
Justin

On Tue, Mar 4, 2008 at 11:01 AM, Chad Hurley [EMAIL PROTECTED] wrote:
 Thanks for the reply. Do you know if it is possible to specify this in
  the Vyatta configuration so that you don't need to reconfigure it
each
  time? -CH



  -Original Message-
  From: [EMAIL PROTECTED]
  [mailto:[EMAIL PROTECTED] On Behalf Of Justin
  Fletcher
  Sent: Tuesday, March 04, 2008 11:16 AM
  To: [EMAIL PROTECTED]
  Subject: Re: [Vyatta-users] Cluster heartbeat / change to ucast?

  Yes, you can edit the configuration directly; however, you'll need to
  modify
  it again on reboot as it's created from the Vyatta configuration.

  Best,
  Justin

  On Tue, Mar 4, 2008 at 4:43 AM, Chad Hurley [EMAIL PROTECTED] wrote:
  
  
  
  
   The heartbeat from my Vyatta cluster is creating errors on another
  cluster
   on my network.  I would like to change the default bcast heartbeat
to
  ucast.
   Does anyone know if it is save to edit the following file directly
  without
   any adverse affects?
  
  
  
   File:
  
   /etc/ha.d/ha.cf
  
  
  
   Current config:
  
   keepalive 1
  
   deadtime 4
  
   warntime 2
  
   initdead 120
  
   logfacility daemon
  
   bcast eth0 eth1
  
   auto_failback off
  
   node riv1 riv2
  
   ping 192.168.5.3 192.168.0.221
  
   respawn hacluster /usr/lib/heartbeat/ipfail
  
  
  
   I would like to replace the bcast line with:
  
   ucast eth0 192.168.5.5
  
   ucast eth1 192.168.0.252
  
  
  
   Anyone had luck with this type of config?
  
  
  
   Thanks,
  
   Chad
  
  
  
  
   ___
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users
  
  
  ___
  Vyatta-users mailing list
  Vyatta-users@mailman.vyatta.com
  http://mailman.vyatta.com/mailman/listinfo/vyatta-users

___
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users


Re: [Vyatta-users] cannot clear t3-options

2008-03-05 Thread Chad Hurley
Ah, Thanks!

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Robyn
Orosz
Sent: Wednesday, March 05, 2008 9:53 AM
To: [EMAIL PROTECTED]
Subject: Re: [Vyatta-users] cannot clear t3-options

Hi Chad,

The t3-options parent node is a required node that has a set of default 
values nested beneath it.  If you want to delete the actual option 
values you've set beneath t3-options to get back to the defaults, you 
can try deleting the values nodes individually:

delete interface wan0 t3-options line-coding

etc. etc.

The node is required in order to load the correct driver options for 
either T1/ E1 or T3/ E3 so it needs to be there before you can 
successfully commit the serial interface configuration.

Thank you,

Robyn

Chad Hurley wrote:

 Hi,

  

 When I try to delete my t3-options I get the following error:

  

 Commit Failed

 t1/e1/t3/e3-option is not specified

  

 Is there a work around for this?

  

 Thanks,

 Chad Hurley




 ___
 Vyatta-users mailing list
 Vyatta-users@mailman.vyatta.com
 http://mailman.vyatta.com/mailman/listinfo/vyatta-users
   
___
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users
___
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users


[Vyatta-users] vif 1 on wan0

2008-03-05 Thread Chad Hurley
Sorry for all the questions but this is the first time I have used
anything outside of Ethernet on a Vyatta router.

 

I have configured a Sangoma A301 card and the system finds fine.

 

I have configured it with vif 1 and assigned an address.  However, when
I try to ping the address from the router itself I get the error:

 

connect: Network is unreachable

 

Am I missing something?

 

Thanks again in advance.

 

 

___
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users


Re: [Vyatta-users] vif 1 on wan0

2008-03-05 Thread Chad Hurley
ppp

 

You are right. This is a new router with a new ISP and we have not
gotten the link up with the LEC for testing yet.  Thanks for the
feedback.

 

-Chad

 

From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Aubrey
Wells
Sent: Wednesday, March 05, 2008 10:09 AM
To: [EMAIL PROTECTED]
Subject: Re: [Vyatta-users] vif 1 on wan0

 

Is your serial connection up? You won't be able to ping it until the
connection comes up because that's when the vif gets created. if you do
a ifconfig from the shell, you will probably see that wan0.1 is not
created yet.

 

Are you using ppp or c-hdlc?


--

Aubrey Wells

Senior Engineer

Shelton | Johns Technology Group

A Vyatta Ready Partner

www.sheltonjohns.com

 

 





 

On Mar 5, 2008, at 10:06 AM, Chad Hurley wrote:





Sorry for all the questions but this is the first time I have used
anything outside of Ethernet on a Vyatta router.

 

I have configured a Sangoma A301 card and the system finds fine.

 

I have configured it with vif 1 and assigned an address.  However, when
I try to ping the address from the router itself I get the error:

 

connect: Network is unreachable

 

Am I missing something?

 

Thanks again in advance.

 

 

___
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users

 

___
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users


[Vyatta-users] Cluster heartbeat / change to ucast?

2008-03-04 Thread Chad Hurley
The heartbeat from my Vyatta cluster is creating errors on another
cluster on my network.  I would like to change the default bcast
heartbeat to ucast.  Does anyone know if it is save to edit the
following file directly without any adverse affects?

 

File:

/etc/ha.d/ha.cf

 

Current config:

keepalive 1

deadtime 4

warntime 2

initdead 120

logfacility daemon

bcast eth0 eth1

auto_failback off

node riv1 riv2

ping 192.168.5.3 192.168.0.221

respawn hacluster /usr/lib/heartbeat/ipfail

 

I would like to replace the bcast line with:

ucast eth0 192.168.5.5

ucast eth1 192.168.0.252

 

Anyone had luck with this type of config?

 

Thanks,

Chad

 

 

___
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users


Re: [Vyatta-users] Cluster heartbeat / change to ucast?

2008-03-04 Thread Chad Hurley
Thanks for the reply. Do you know if it is possible to specify this in
the Vyatta configuration so that you don't need to reconfigure it each
time? -CH

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Justin
Fletcher
Sent: Tuesday, March 04, 2008 11:16 AM
To: [EMAIL PROTECTED]
Subject: Re: [Vyatta-users] Cluster heartbeat / change to ucast?

Yes, you can edit the configuration directly; however, you'll need to
modify
it again on reboot as it's created from the Vyatta configuration.

Best,
Justin

On Tue, Mar 4, 2008 at 4:43 AM, Chad Hurley [EMAIL PROTECTED] wrote:




 The heartbeat from my Vyatta cluster is creating errors on another
cluster
 on my network.  I would like to change the default bcast heartbeat to
ucast.
 Does anyone know if it is save to edit the following file directly
without
 any adverse affects?



 File:

 /etc/ha.d/ha.cf



 Current config:

 keepalive 1

 deadtime 4

 warntime 2

 initdead 120

 logfacility daemon

 bcast eth0 eth1

 auto_failback off

 node riv1 riv2

 ping 192.168.5.3 192.168.0.221

 respawn hacluster /usr/lib/heartbeat/ipfail



 I would like to replace the bcast line with:

 ucast eth0 192.168.5.5

 ucast eth1 192.168.0.252



 Anyone had luck with this type of config?



 Thanks,

 Chad




 ___
  Vyatta-users mailing list
  Vyatta-users@mailman.vyatta.com
  http://mailman.vyatta.com/mailman/listinfo/vyatta-users


___
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users
___
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users


[Vyatta-users] Vyatta running on appliance...

2008-02-07 Thread Chad Hurley
Hi All;

 

I just wanted to let people know that I have a Vyatta VC3 cluster
running in production on the following hardware:

 

 http://www.yawarra.com.au/hw-eber.php

 

Options:

768 Mb RAM [max]

4 x 1 G ports

512 Mb. Flash card

 

Initial install was via a USB cdrom drive.  If I were to order again I
would get the 2G flash drives. L  But other than that, it has run
extremely well and has been very stable. It is doing static routing
between our administrative LANs and our mission critical Broadcast LANs.

 

Chad Hurley

Acting Deputy Director, Technical Operations

Radio Free Asia

T. 202-530-2024

E. [EMAIL PROTECTED]

___
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users