Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Paste the contents of that file here On Saturday, January 5, 2019 at 10:43:45 PM UTC-8, monmul wrote: > > Yes it does! > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

as in yes it does have a resolvconf.conf file.just in case there was confusion! On a totally different topic, Is there some where I can use an offset of 180 degrees for the wind? I cannot find it in the config file? On Sun, Jan 6, 2019 at 7:43 PM dunbrokin wrote: > Yes it does! > > >

[weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Okay. I understand what you are saying, but was offering an additional solution. On Sunday, January 6, 2019 at 1:37:05 AM UTC-5, Scott Grayban wrote: > > Having RTC won't help with his error. > > Jan 6 18:25:20 Weatherpi ntpd_intres[684]: host name not found: >> 0.debian.pool.ntp.org >>

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Yes it does! On Sun, Jan 6, 2019 at 7:11 PM Scott Grayban wrote: > Does your PI have this file ? > > /etc/resolvconf.conf > > On Saturday, January 5, 2019 at 10:09:18 PM UTC-8, monmul wrote: >> >> The nameserver in my Pi /etc/resolv.cont is 10.1.1.1.as that is my >> modem? >> But these are

[weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Having RTC won't help with his error. Jan 6 18:25:20 Weatherpi ntpd_intres[684]: host name not found: > 0.debian.pool.ntp.org > Jan 6 18:25:20 Weatherpi ntpd_intres[684]: host name not found: > 1.debian.pool.ntp.org > Jan 6 18:25:20 Weatherpi ntpd_intres[684]: host name not found: >

[weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Okay Scott, just giving another possible option. On Sunday, January 6, 2019 at 1:21:25 AM UTC-5, Scott Grayban wrote: > > Rich having or not having a RTC isn't the issue read his post about > dns resolve > > On Saturday, January 5, 2019 at 10:18:28 PM UTC-8, rich T wrote: >> >> If you

[weewx-user] Re: Meteobridge realtime extension for weeWX

If the driver isn't listed at https://github.com/weewx/weewx/wiki then the answer most likely is no. On Saturday, January 5, 2019 at 10:17:07 PM UTC-8, Ian Millard wrote: > > I may be imagining things but some time ago I came across a mention of a > Meteobridge realtime extension for weeWX to

[weewx-user] Meteobridge realtime extension for weeWX

I may be imagining things but some time ago I came across a mention of a Meteobridge realtime extension for weeWX to emit live data in a similar fashion to the CRT extension. I have searched and searched but nothing has turned up. I am prepared to try and have a go myself but Python is very

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Does your PI have this file ? /etc/resolvconf.conf On Saturday, January 5, 2019 at 10:09:18 PM UTC-8, monmul wrote: > > The nameserver in my Pi /etc/resolv.cont is 10.1.1.1.as that is my > modem? > But these are extenal IP addresseswill that work? > > On Sun, Jan 6, 2019 at 6:50 PM

[weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Is there a ¨How To¨ for setting up the NTP on the RPi? On Sunday, 6 January 2019 18:39:44 UTC+13, monmul wrote: > > This is all I could find on the syslogno errors given so I will ignore > the LOOP etc > > Jan 6 18:25:20 Weatherpi weewx[831]: engine: Loading station type Vantage >

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

The nameserver in my Pi /etc/resolv.cont is 10.1.1.1.as that is my modem? But these are extenal IP addresseswill that work? On Sun, Jan 6, 2019 at 6:50 PM Scott Grayban wrote: > Forget that... you need to edit your /etc/resolv.conf > > Add > nameserver 8.8.8.8 > nameserver 8.8.4.4 > >

[weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

apt install ntp service ntp restart On Saturday, January 5, 2019 at 9:51:13 PM UTC-8, monmul wrote: > > Is there a ¨How To¨ for setting up the NTP on the RPi? > > On Sunday, 6 January 2019 18:39:44 UTC+13, monmul wrote: >> >> This is all I could find on the syslogno errors given so I will >>

[weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

You need to fix this.. apt install ntp ntpd_intres[684]: host name not found: 0.debian.pool.ntp.org On Saturday, January 5, 2019 at 9:39:44 PM UTC-8, monmul wrote: > > Jan 6 18:25:20 Weatherpi ntpd_intres[684]: host name not found: > 0.debian.pool.ntp.org > Jan 6 18:25:20 Weatherpi

[weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

As for a real time clock, I use a DS3231 Real Time Clock (RTC) module that provides the clock for the my RPI3. Rich > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an

[weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

This is all I could find on the syslogno errors given so I will ignore the LOOP etc Jan 6 18:25:20 Weatherpi weewx[831]: engine: Loading station type Vantage (weewx.drivers.vantage) Jan 6 18:25:20 Weatherpi weewx[831]: import of driver failed: [Errno 11] Resource temporarily unavailable

[weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

On Sunday, 6 January 2019 14:20:09 UTC+10, monmul wrote: > > Hmmm! I would have to pass on that oneI am not sure I even know what > it means.is it something I set up when following the instructions about > installing nginx? > > Ok, you posted a screen capture with a couple of loop

[weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Depends, are loop and archive records being properly (and regularly) received/created ? If so it is fine, if not then we look deepre. Gary On Sunday, 6 January 2019 14:04:26 UTC+10, monmul wrote: > > Is this normal?i.e. waking up a sleeping consolesee below! > . > . > 241, dayET: 0.0,

[weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Is this normal?i.e. waking up a sleeping consolesee below! . . 241, dayET: 0.0, dayRain: 1.1496062995, dewpoint: 58.5620048927, extraAlarm1: 0, extraAlarm2: 0, extraAlarm3: 0, extraAlarm4: 0, extraAlarm5: 0, extraAlarm6: 0, extraAlarm7: 0, extraAlarm8: 0, forecastIcon: 3, forecastRule:

[weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Yes thank you all for your help I caught that error.but now I have a new set as I try and set up nginx! . . pi@Weatherpi:~ $ sudo mkdir -p /var/weewx/reports pi@Weatherpi:~ $ sudo mount -a mount: /etc/fstab: parse error: ignore entry at line 6. pi@Weatherpi:~ $ sudo sed -i -e ‘s%HTML_ROOT

[weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

what have you set latitude and longitude to in weewx.conf?? The error implies latitude is wrongly set On Sunday, 6 January 2019 05:25:56 UTC+2, monmul wrote: > > OK, with the correct path!still no joy! > > > pi@Weatherpi:/ $ sudo weewxd /etc/weewx/weewx.conf > Traceback (most recent call

[weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Sorry my errorthe latitude and longitude were formatted incorrectly in the config file.works now! On Sunday, 6 January 2019 16:25:56 UTC+13, monmul wrote: > > OK, with the correct path!still no joy! > > > pi@Weatherpi:/ $ sudo weewxd /etc/weewx/weewx.conf > Traceback (most recent

[weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Ok, it looks like you have a problem with your latitude and longitude in weewx.conf. You should have two lines similar to: # Latitude and longitude in decimal degrees latitude = aaa.bbb longitude = xxx. If you can't find the problem I suggest you post a copy of your weewx.conf

Re: [weewx-user] Re: 24 hour rain total in mysql database

Wow, thanks Thomas. I will use this as a guide to try out and test this. On Friday, January 4, 2019 at 8:38:11 PM UTC-5, Thomas Keffer wrote: > > If you want it precalculated in the database, you could write a WeeWX > service to do this. It would look something like this (NOT TESTED): > > *File

Re: [weewx-user] Re: Alarm.py Help

Looks like your smtp server hangs if you try to connect to it using SSL. Try this version. -tk On Sat, Jan 5, 2019 at 5:23 PM wrote: > As requested. > > > > Thanks for helping. > > > > Tom > > > > *From:* weewx-user@googlegroups.com *On > Behalf Of *Thomas Keffer > *Sent:* Saturday, January

Re: [weewx-user] Re: Interceptor setup

Look in the config file for the DHCP server. You should find something like this: # Fixed IP addresses can also be specified for hosts. Then, you can use the MAC address of the console and whatever IP you wish it to have. Just be aware that the fixed IP has to be outside the DHCP range, so you'd

Re: [weewx-user] Re: Interceptor setup

BTW that's only if your WS is the only one that's connecting to the hostapd !! I can't say if it will change if another device connects and *non should because it will cause to much interference with port 80*. On Saturday, January 5, 2019 at 5:45:26 PM UTC-8, Zsolt Máté wrote: > > Good to

Re: [weewx-user] Re: Interceptor setup

Oh that IP for the LAN with hotsapd won't change. So your weather station won't get a new IP on the 10.x network. On Saturday, January 5, 2019 at 5:34:57 PM UTC-8, Zsolt Máté wrote: > > The issue is not the eth0, that I've reserved in my router. > The problem could be the indoor unit, that

[weewx-user] Getting the RPi 3 with Davis Vantage up and running

I am new to weewx and am trying to set it up on my Rpi 3. I have a Davis Vantage weather station. I have a serial Envoy data logger attaced to my Rpi with a serial/usb converter. In following the set up instructions, I get these errors! sudo weewxd weewx.conf Traceback (most recent call last):

[weewx-user] Re: use Weewx on raspberry

Thank you so much will start a new one and include this post and answer on it! On Sunday, 6 January 2019 14:26:43 UTC+13, gjr80 wrote: > > Hi, > > It appears that you are in the /home/pi directory and hence weewxd is > looking for weewx.conf in /home/pi. Use the full path for weewx.conf ie: > >

Re: [weewx-user] Re: Interceptor setup

Good to know. Thanks for the information. On Sunday, January 6, 2019 at 2:38:32 PM UTC+13, Scott Grayban wrote: > > Oh that IP for the LAN with hotsapd won't change. So your weather > station won't get a new IP on the 10.x network. > > > On Saturday, January 5, 2019 at 5:34:57 PM UTC-8,

Re: [weewx-user] Re: Interceptor setup

The issue is not the eth0, that I've reserved in my router. The problem could be the indoor unit, that connects to wlan0 and receives the 10.*.*.* IP address. On Sunday, January 6, 2019 at 12:24:48 PM UTC+13, Scott Grayban wrote: > > Glad you got it working !! > > Most routers have reserve DHCP

[weewx-user] Re: use Weewx on raspberry

Hi, It appears that you are in the /home/pi directory and hence weewxd is looking for weewx.conf in /home/pi. Use the full path for weewx.conf ie: $ sudo weewxd /etc/weewx/weewx.conf Gary PS. Would be appreciated if you started a new thread for new issues, having multiple issues throughout

[weewx-user] Re: use Weewx on raspberry

I am not sure if this is the right place to post this help request...please direct me elsewhere if not. I am new to weewx and am trying to set it up on my Rpi 3. I have a Davis Vantage weather station. I have a serial Envoy data logger attaced to my Rpi with a serial/usb converter. In following

RE: [weewx-user] Re: Alarm.py Help

As requested. Thanks for helping. Tom From: weewx-user@googlegroups.com On Behalf Of Thomas Keffer Sent: Saturday, January 5, 2019 6:58 PM To: weewx-user Subject: Re: [weewx-user] Re: Alarm.py Help Hmmm. Try this version. It has been heavily instrumented. Again, run with

Re: [weewx-user] Re: Alarm.py Help

Hmmm. Try this version. It has been heavily instrumented. Again, run with debug=1. Make sure you restart WeeWX. -tk On Sat, Jan 5, 2019 at 4:46 PM wrote: > I used the alarm.py version that you sent the link to. I attached it > along with the syslog. I am not using an SSL connection. Still

[weewx-user] Re: Alarm.py Help

I used the alarm.py version that you sent the link to. I attached it along with the syslog. I am not using an SSL connection. Still nothing. I did notice an error when I quit weewx this time. On Saturday, January 5, 2019 at 12:20:32 PM UTC-6, nine...@gmail.com wrote: > > I set up

Re: [weewx-user] Re: Interceptor setup

Glad you got it working !! Most routers have reserve DHCP settings. So I'm sure yours does also. On Saturday, January 5, 2019 at 3:18:33 PM UTC-8, Zsolt Máté wrote: > > That's what I'm researching right now. > > On Sunday, January 6, 2019 at 12:11:31 PM UTC+13, Scott Grayban wrote: >> >> Use

Re: [weewx-user] Alarm.py Help

Thanks, Tom This problem was addressed in issue #351 . Try the version of alarm.py in the development branch and see if it works. -tk On Sat, Jan 5, 2019 at 3:13 PM wrote:

Re: [weewx-user] Re: Interceptor setup

If you're asking me, yes, I did. After reading your reply, I switched to su and ran the command as root. Tanks for the tutorial. The only thing I don't like (but I can live with it) is the DHCP. In case the indoor unit looses DC power for any reason, it may receive a new IP address. Then

[weewx-user] Re: Exfoliation Forcast Issue

On Tuesday, November 6, 2018 at 11:01:12 PM UTC-5, Dave Spicer wrote: > > I am running the Exfoliation skin and I have added the exfoliation > forecast. Everything is working but the forecast is not showing. I have > verified that MySQL has the forecast data. I have enabled the Forecast page >

Re: [weewx-user] Alarm.py Help

If you did not see a log entry to the effect "alarm: email sent to: XXX", then an email did not go out. Try again, this time setting debug=1, then restarting WeeWX. Then post the log. -tk On Sat, Jan 5, 2019 at 10:20 AM wrote: > I set up alarm.py per the instructions (I think). I wanted to

Re: [weewx-user] Re: Record time delay

On Friday, October 26, 2018 at 9:15:25 AM UTC-4, Thomas Keffer wrote: > > Definitely something odd going on with the interceptor driver. As Gary > notes, it regularly stores data to the database at five minute intervals, > but it falls farther and farther behind real-time as weewx runs. > > One

Re: [weewx-user] Re: Interceptor setup

Did you get it working ? On Friday, January 4, 2019 at 7:21:17 PM UTC-8, Zsolt Máté wrote: > > Thanks, I was running it with sudo. > > On Saturday, January 5, 2019 at 4:17:32 PM UTC+13, Scott Grayban wrote: >> >> Run that as root >> On Jan 4, 2019, at 7:15 PM, "Zsolt Máté" wrote: >>> >>> I can't

[weewx-user] Re: Weewx on a Raspberry Zero does not find USB connection

On Sunday, December 9, 2018 at 4:02:01 AM UTC-5, klausklang123 wrote: > > Hello, > > I installed Weewx on a Raspberry Zero WH. My weather station is connected > to the Raspberry via USB. Unfortunately, Weewx does not find the weather > station. > you might try modifying the file

[weewx-user] Re: use Weewx on raspberry

hello Pat or Gary I go around in circles, and I started badly, I reinstalled my RPI and reinstalled weewx for Sqlite3, in the prerequisites I have to install Sqlite3 by apt-get install sqlite3, that's all and I leave the basic config in weewx.conf. after I will go to Mysql. Patrick On

[weewx-user] Alarm.py Help

I set up alarm.py per the instructions (I think). I wanted to test an alarm so I set it for expression= "outTemp > 40". When I run weewx I get alarm: Alarm set for expression: 'outTemp > 40.0' alarm: Alarm expression "outTemp > 40.0" evaluated True at 2019-01-05 11:15:00 CST (1546708500)

[weewx-user] Re: Metergroup ATMOS 41 integration

On Wednesday, September 12, 2018 at 3:41:27 AM UTC-4, Aleksandrs Sergejevs wrote: > > Hello! > Is there are any possibility to integrate support for Metergroup ATMOS 41 > weather station? > Here is info about it: > https://www.metergroup.com/environment/products/atmos-41-weather-station/ >

[weewx-user] Re: APRS World Wind Data Logger with WeeWx

On Friday, October 19, 2018 at 4:03:58 PM UTC-4, RoyR wrote: > > I searched the group and didnt turn up anything, so I figured I'd ask the > question: > > Has anyone ever used an APRS World Wind Data Logger (via its rs232 output) > successfully into WeeWx? > royr, have you made any

[weewx-user] Re: USB write fail and then cannot restart service

On Tuesday, September 4, 2018 at 4:56:38 AM UTC-4, Invisible Man wrote: > > The first issue remains. *I have tested with 2 different USB cables and > it persists. Occurs after a few hours of normal work.* > could you try the boot/config.txt settings described here:

[weewx-user] Re: Acurite 1092 / Pressure outside limits

On Monday, September 3, 2018 at 10:57:48 PM UTC-4, Bryan B wrote: > > Hello! > > I have an Acurite 01092DI, currently running Weewx on Raspbian. > This is my first time using Weewx, so I may be missing something simple - > but I seem to be having an odd pressure outside limits error. > > My

[weewx-user] Re: WMR200: Strange values from temp/humid-sensors (not in use)

On Friday, January 4, 2019 at 12:53:02 PM UTC-5, Per Edström wrote: > > Made a new Weewx-install (3.8.2) as the upgrade caused problems (WMR200 > was not found on USB). > impossible to diagnose without more details. what was the previous version of weewx? what was the previous wmr200 driver

[weewx-user] Re: Klimalogg Pro on Synology NAS

Interesting idea. I have a Synology NAS (DS413) but got disillusioned with it as an application server for anything other than the officially supported packages (Surveillance Station mostly works well, had one troublesome "upgrade"), so I keep it pretty much as a file server. However, I use it

[weewx-user] Re: use Weewx on raspberry

Hello, The easiest and fastest might be to use the FileParse driver: you export the data in a file and weewx retrieve them from that file. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails

[weewx-user] Re: Fine Offset WH-2650 and weewx

Hi Matt. I solved with this map: [[sensor_map]] pressure = pressure barometer = barometer outHumidity = humidity_in inHumidity = humidity_in outTemp = temperature_in inTemp = temperature_in windSpeed = wind_speed windGust =