Re: [weewx-user] can I plot customized variables?

Unfortunately, with the present architecture, the variable has to be in the database. So, if you can arrange to have it calculated, perhaps by writing a WeeWX service, then it's easy enough to include it in the database and plot it. -tk On Fri, Apr 5, 2019 at 4:37 PM Andrea Cecilia wrote: >

[weewx-user] can I plot customized variables?

Hi, I have a very simple question for you: is it possible to make plots of customized variables, such as $trend($time_delta=300).outTemp , in weewx? -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop

[weewx-user] Re: Acurite Bridge stopped working yesterday

No it is not bricked, my hub stopped reporting yesterday. https://www.wxforum.net/index.php?topic=36552.msg375667;topicseen#msg375667 On Friday, April 5, 2019 at 5:46:51 PM UTC-4, Jamie Borget wrote: > > I noticed yesterday morning my Pi stopped reporting, upon further > inspection I could see

[weewx-user] Re: Error 'class NameMapper.NotFound'

You are correct. The tag is defined in niculskin skin.conf and all labels are there. But somehow the new version of historygenerator does not seem to be able to find the tag with its labels. Am Freitag, 5. April 2019 19:48:04 UTC+2 schrieb Copain: > Weewx runs on RPi 3B with dietpi. > >

Re: [weewx-user] Re: Error 'class NameMapper.NotFound'

I'm sorry. I don't know anything about the bootstrap, lastrain, or niculskin skins. I was just merely observing that the tag "niculskinLabels" is defined in the niculskin's skin.conf file, so I suggested you look there. Did you? -tk On Fri, Apr 5, 2019 at 3:22 PM Copain wrote: > Hello Thomas >

[weewx-user] Re: Error 'class NameMapper.NotFound'

Hello Thomas Thanks for your support and interest in resolving this issue. I resored niculskin from backup to the previously perfectly working state, but to no avail. The error did not go away. As niculskin did not get any updates recently, I suspected something to be wrong with the 2 skin

Re: [weewx-user] Re: weewx-multi with identical Fine Offset USB WS1081

Sorry. Perhaps my choice of the word "port" was a poor one. I meant in a hardware sense. The udev rule would be written for a specific bus and device number. On Fri, Apr 5, 2019 at 12:35 PM mwall wrote: > On Tuesday, April 2, 2019 at 2:50:32 PM UTC-4, Thomas Keffer wrote: >> >> You could use a

[weewx-user] Re: New Station Setup suggestions?

Thanks! Looks like data is getting loaded into weewx and I can open the html file locally but when I try to access via Apache2 I am getting: "Forbidden You don't have permission to access /weewx on this server. -- Apache/2.4.29 (Ubuntu) Server at weewx.muckmuck.net

Re: [weewx-user] Re: weewx-multi with identical Fine Offset USB WS1081

On Tuesday, April 2, 2019 at 2:50:32 PM UTC-4, Thomas Keffer wrote: > > You could use a udev rule to assign different symbolic names, depending on > the port. > unfortunately that only works with devices that have usb-to-serial mappings. the fine offset stations (and quite a few others) have a

[weewx-user] Re: Crash with log info

On Friday, April 5, 2019 at 3:13:06 PM UTC-4, Ron wrote: > > Is it considered "expected" that the driver error would take out weewx > itself? > weewx will continue to collect data even if there are failures in the reporting system but failures in the data collection will typically cause weewx

[weewx-user] Re: Crash with log info

Thanks very much for your tip. I'll try that change to the driver. I had filed a different issue on the Github for HP1000 but didn't get a response. I found an email address for her recently so I'll try dropping her a note. Is it considered "expected" that the driver error would take out weewx

Re: [weewx-user] Error 'class NameMapper.NotFound'

I suspect you're missing the section [niculskinLabels] in skin.conf. See step #3 in Configuration . -tk On Fri, Apr 5, 2019 at 10:48 AM Copain wrote: > Weewx runs on RPi 3B with dietpi. > > After setting up RPi with dietpi and weewx, I

[weewx-user] Error 'class NameMapper.NotFound'

Weewx runs on RPi 3B with dietpi. After setting up RPi with dietpi and weewx, I installed niculskin and lastrain extension, which ran without any problems. Thereafter I switched to bootstrap skin, which also worked perfectly. Today I wanted to go back to niculskin for some testing. I enabled

[weewx-user] Re: weewx interceptor no data

I ran the command below, but nothing is displayed I have configured the console to point to the pi3 (192.168.1.148, port 80, server type PHP, upload type DEFAULT) "pi@raspberrypi:~ $ sudo PYTHONPATH=/usr/share/weewx python /usr/share/weewx/user/interceptor.py --device=observer --mode=listen

[weewx-user] Re: New Station Setup suggestions?

It goes in the section. On Friday, April 5, 2019 at 10:22:23 AM UTC-7, ,Ron Herring wrote: > > You may want to add this line to your skins/Seasons/index.html.tmpl (or > whichever skin you are using): > > This will allow the web page to automatically refresh on the viewers > browser once

[weewx-user] Re: New Station Setup suggestions?

You may want to add this line to your skins/Seasons/index.html.tmpl (or whichever skin you are using): This will allow the web page to automatically refresh on the viewers browser once you have restarted weewx. -- You received this message because you are subscribed to the Google Groups

[weewx-user] Re: New Station Setup suggestions?

LOL! "No cats were skinned..." WAF= Wife Acceptance Factor Perfect timing! The WeatherLinkUSB was just delivered! Thank you so much for the suggestions and information, I am getting started on the install now. Wish me luck. Thanks again, Scott On Friday, April 5, 2019 at 9:53:52 AM

[weewx-user] Re: New Station Setup suggestions?

On Thursday, April 4, 2019 at 11:15:52 AM UTC-4, Scott Muckleroy wrote: > > > Hello- I have a Vantage Vue and will be receiving a WeatherLinkUSB > tomorrow and I am trying to figure out what would be the best setup to > accomplish the following: > > 1. real-time'ish WX data to web site and

[weewx-user] Re: weewx interceptor no data

what happens when you run the interceptor in listen mode, with the N23DQ configured to send to the pi3? you can run it directly like this: sudo PYTHONPATH=/usr/share/weewx python /usr/share/weewx/user/interceptor.py --device=observer --mode=listen --port 80 --debug -- You received this

[weewx-user] Re: Crash with log info

On Wednesday, March 27, 2019 at 4:35:44 PM UTC-4, Ron wrote: > > > Mar 26 20:02:17 AllenWeather weewx[7839]: File >>> "/usr/share/weewx/user/HP1000.py", line 524, in genLoopPackets >> >> Mar 26 20:02:17 AllenWeather weewx[7839]: interp_data = >>>

[weewx-user] Re: Crash with log info

On Thursday, March 28, 2019 at 2:50:24 AM UTC-4, AsgeirK wrote: > > I have a similar issue since I upgraded to the latest version: > > Mar 27 18:07:48 PI-W4 weewx[507]: wmr200: MainThread: W Exiting with > packets still in live queue cnt:2 > Mar 27 18:07:48 PI-W4 weewx[507]: wmr200: MainThread:

Re: [weewx-user] Re: Interceptor setup

On Thursday, April 4, 2019 at 6:48:06 AM UTC-4, bthoven wrote: > > That was what I have been trying to do, the sniff, without success. Could > you suggest how should I set the sniff thing. > > Now my ObserverIP has local ip 192.168.2.122. It directs the data to my > live weewx 192.168.2.3 port

[weewx-user] Re: Crash with log info

This same exception occurred again last night, and once again weewx did not restart and I could not start it manually until after I rebooted the Pi. There were no suggestions on my original post. Hoping someone can give me some advice now that it is a repeating issue. Thanks. -- You received

Re: [weewx-user] Is there a printable version of the documentation available anywhere?

Doh! Thank you Thomas! I've now got a binder ready to start reading. :) *pat* -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [weewx-user] Is there a printable version of the documentation available anywhere?

The CSS that comes with the documentation now includes that CSS formatting. Just press ctrl-P from your browser. Just try it and see if you like it. On Fri, Apr 5, 2019 at 6:59 AM wrote: > Is there a printable version of the documentation available anywhere? I'd > like to be able to read it

[weewx-user] Is there a printable version of the documentation available anywhere?

Is there a printable version of the documentation available anywhere? I'd like to be able to read it without having to sit in front of a screen. Upon searching this group I *did* find a 2 message thread about a CSS addition for formatting printed documentation, but it was nearly 3 years old

Re: [weewx-user] Add soiltemp to Weewx?

Thank you for your answer, I have really tried to read the Cust Manual but with no luck.. If you look at this: http://vadrette.datan.no you can see what I have, its the "out of box" config but missing the soilTemp3_C ( the name is an other story :), so my question is, is there an "easy" way to do

[weewx-user] Add soiltemp to Weewx?

Have this setup in Vantage Pro2: TRANSMITTERS: Channel Receive Repeater Type 1 active noneiss 2 active nonesoil The extra soil is a temp only showing at the consol, how ca this (soilTemp3_C) be shown in Weewx, graphs,highs,lows? -- You