Re: [weewx-user] How to display pm2.5 & lightning graphs?

2020-10-06 Thread Tim Tuck
Hi Paul, My old system uses the Interceptor and 3.x but with the advent of 4.1 I built a new server and also changed to the GW1000 driver since it captures more of the data from the 1000 than the Interceptor does. I've imported some of the data from the old db to the new db to check that year

Re: [weewx-user] ecowitt extra sensor data parameters

2020-10-06 Thread Tim Tuck
Hi Paul, You could try swapping from the Interceptor plugin to the GW1000 driver which captures more of the data than the Interceptor does rather than trying to modify things to fit. https://github.com/gjr80/weewx-gw1000 cheers Tim On 7/10/20 9:57 am, Paul Ward wrote: HI forum! I'm running

[weewx-user] Re: ecowitt extra sensor data parameters

2020-10-06 Thread gert.a...@gmail.com
Hi Have You seen this ? Gert On Wednesday, October 7, 2020 at 12:57:53 AM UTC+2 ward...@gmail.com wrote: > HI forum! I'm running 4.1.1 on a Pi connecting directly to a HP2551 with > sensors of WS

Re: [weewx-user] Register your WeeWX station!

2020-10-06 Thread peterq...@gmail.com
I was just poking around the map and was wondering who had stations in the middle of Mongolia. Looks like some folks in the US are missing a minus sign. And one guy in Montana putting the minus on the Lat instead of the Long and has their station end up in the Southern Ocean. On Tuesday, Octobe

Re: [weewx-user] Upload to PWS fails

2020-10-06 Thread Tom Keffer
The log indicates the 1300 and 1330 records were uploaded. But, looking at your PWS page for yesterday (Oct-5), I'm not seeing the two data points. On Tue, Oct 6, 2020 at 6:53 PM Ken Harlan wrote: > If those uploads look correct to you then there must be something wrong at > PWS. The data does

Re: [weewx-user] Upload to PWS fails

2020-10-06 Thread Ken Harlan
If those uploads look correct to you then there must be something wrong at PWS. The data does not show up on the site although it shows it is active. Thanks Tom, I will contact PWS. Ken On Tue, Oct 6, 2020, 4:37 PM Tom Keffer wrote: > I'm not understanding what the problem is. The log shows t

Re: [weewx-user] Temperature being converted when I don't want it to

2020-10-06 Thread bdf0506
Makes sense - thanks for clarifying. Yea, so it looks like I need to ensure that I'm consistent with ALL measurements in my loop packets to be one or the other. On Tuesday, October 6, 2020 at 7:46:33 PM UTC-4 tke...@gmail.com wrote: > Doesn't matter what units are in the database. Doesn't matte

Re: [weewx-user] Temperature being converted when I don't want it to

2020-10-06 Thread Tom Keffer
Doesn't matter what units are in the database. Doesn't matter what units are used to display. What matters is that *all units within the loop packet* are in the same unit system. So, if you're adding a temperature in Fahrenheit to a loop packet in Celsius, you're going to get the results you see.

Re: [weewx-user] Cumulated bars

2020-10-06 Thread Tom Keffer
Try aggregate_type = cumulative On Tue, Oct 6, 2020 at 11:49 AM Invisible Man wrote: > Hello, > > In Weewx, is it possible to generate a graph with cumulated bars? For > example, for year's rain, you'd see rain in January, then rain of January + > February, then rain of January + February +

Re: [weewx-user] Upload to PWS fails

2020-10-06 Thread Tom Keffer
I'm not understanding what the problem is. The log shows two uploads: one at 13:18:13, and one at 13:30:23. Am I missing something? On Tue, Oct 6, 2020 at 11:39 AM Ken Harlan wrote: > Here is the syslog with debug set to 2. > > pi@raspberrypi:~ $ sudo tail -f /var/log/syslog > Oct 5 13:18:11 r

[weewx-user] ecowitt extra sensor data parameters

2020-10-06 Thread Paul Ward
HI forum! I'm running 4.1.1 on a Pi connecting directly to a HP2551 with sensors of WS80 ultrasonic, WH40 rain, WH31 indoor, WH41 pm2.5 AQ, WH51 soil, WH57 lightning (from Froggit in UK). It's using weewx-interceptor in ecowitt-client mode, default config. It seems to find most of the sensors b

Re: [weewx-user] How to display pm2.5 & lightning graphs?

2020-10-06 Thread Paul Ward
Hi I'm a bit new to this and have similar setup except like your originally did Andy without a DP1500 (GW1000) gateway just using the HP2551 with weewx-interceptor in ecowitt-client mode. I've got a lightning detector (wh57), pm2.5 detector (wh41) also soil moisture detector. From the syslogs I

[weewx-user] Temperature being converted when I don't want it to

2020-10-06 Thread bdf0506
I am using the SDR driver to grab stats from an RTL_433 capable devices. It grabs the data from the device and places in the loop packets in Farenheight - which is exactly what I want. Problem is, these are custom database fields that I created for them, so now I need to tell WeeWx which units

[weewx-user] Re: Using MQTT Subscribe

2020-10-06 Thread Timothy Buchanan
Thanks, Rich. I'll try it when I get back. I'll be in our second home for a few days: going to the gun range and the clothing-optional resort (not at the same time!). On Tuesday, October 6, 2020 at 1:19:26 PM UTC-6 bell...@gmail.com wrote: > So, the [[[first/topic]]] are meant to be replaced wi

Re: [weewx-user] Register your WeeWX station!

2020-10-06 Thread Vetti52
being registered, but... when opening the station on the map, there is no preview picture. I am afraid, that for URLs containing windy.com a preview is not available, right? I could establish another URL, which, however is only available per IPv6 (IPv4 access is locked by a firewall). Would this

[weewx-user] Re: Using MQTT Subscribe

2020-10-06 Thread bell...@gmail.com
So, the [[[first/topic]]] are meant to be replaced with the actual topic. So it would be something like this ``` [[Topics]] [[[topic name that snowDepth is published on]]] topic name that snowDepth is published on name = snowDepth [[[topic name that snowRate is published on]]

[weewx-user] Re: Upgrade PWS- WLL or WiFiLogger2?

2020-10-06 Thread jerry...@gmail.com
I'm curious if the curl command works to restart WiFiLogger2. I first tried using the lynx command line browser and it did not resolve the page correctly and didn't restart. I assumed that was because the restart page contains some javascript and lynx doesn't support javascript. I then switc

[weewx-user] Cumulated bars

2020-10-06 Thread Invisible Man
Hello, In Weewx, is it possible to generate a graph with cumulated bars? For example, for year's rain, you'd see rain in January, then rain of January + February, then rain of January + February + March etc. In skin.conf, I see this config. But tweaking the aggregate interval won't help me, b

Re: [weewx-user] Upload to PWS fails

2020-10-06 Thread Ken Harlan
Here is the syslog with debug set to 2. pi@raspberrypi:~ $ sudo tail -f /var/log/syslog Oct 5 13:18:11 raspberrypi weewx[27641] INFO weewx.manager: Added record 2020-10-05 13:00:00 PDT (1601928000) to database 'weewx.sdb' Oct 5 13:18:12 raspberrypi weewx[27641] INFO weewx.manager: Added record

Re: [weewx-user] Upload to PWS fails

2020-10-06 Thread Ken Harlan
Sorry to keep bothering but I am still unable to upload to PWS. The Payson1 station has been removed so only the KCACLARE3 station is registered. I am thinking there must be something wrong with the conf file. Attached is the the weewx.conf file. (Do not seem to attach the conf and syslog at

Re: [weewx-user] file txt to import in weewx

2020-10-06 Thread Sébastien F4GQK
thank you I added the "rain" field in my generated file "Today's Rain" is no longer at zero but every 10 minutes weewx adds my dailyrain. Currently 300 mm today !!! It is the PWS server which gives me my dailyrain. Le mardi 6 octobre 2020 à 14:39:21 UTC+2, tke...@gmail.com a écrit : > Make

[weewx-user] Re: Using MQTT Subscribe

2020-10-06 Thread rich T
I did try using a MAXBOT ultrasonic sensor to measure snow depth but found it was a little flaky. Thinking this year going to use a VL53L0X sensor. On Tuesday, October 6, 2020 at 11:17:07 AM UTC-4, Timothy Buchanan wrote: > > Thanks, Rich, I should be able to edit weewx.conf based on the example

[weewx-user] Re: Using MQTT Subscribe

2020-10-06 Thread Timothy Buchanan
Attached is the extension material that I put into weewx.conf. But when I set enable = true, weewx stops archiving data. Is there an error in this configuration, or could subscribe be incompatible with another service? I'm using the Weatherflowudp driver with mqtt and GW1000 extensions. On Tues

[weewx-user] Re: Using MQTT Subscribe

2020-10-06 Thread Timothy Buchanan
Thanks, Rich, I should be able to edit weewx.conf based on the example at the bottom of that page. I am using an ESP8266 board with an ultrasonic sensor and a temperature sensor (to calibrate the speed of sound), and programming in the Arduino IDE. I'll 3D print a case and mount it above my dec

[weewx-user] Re: Using MQTT Subscribe

2020-10-06 Thread rich T
What type of sensor are you using for measuring snow depth? -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this

Re: [weewx-user] Re: Using MQTT Subscribe

2020-10-06 Thread bell...@gmail.com
What is the topic and format of the MQTT data? For example, are you publishing to a topic of 'snow/snowlevel' and the payload is the actual snow level? Some information is here, https://github.com/bellrichm/WeeWX-MQTTSubscribe/wiki/Configuring But, I'm happy to walk you through it. rich On Tue

Re: [weewx-user] Re: Using MQTT Subscribe

2020-10-06 Thread Timothy Buchanan
Thanks, changing the database was easy with that article. As to my other question, I'm guessing I need to put a Sensor Map in weewx.conf in the MQTTSubscribe section, something like snow/snowlevel = snow? On Monday, October 5, 2020 at 6:59:11 PM UTC-6 tke...@gmail.com wrote: > The schemas are u

[weewx-user] Re: Archiving not happening when using SDR

2020-10-06 Thread bdf0506
I figured it out. It was a nasty little bug/race condition which is probably works as designed. I noticed that when I would run WeeWx directly (thanks for the pointer to try that) it was showing my loop packets were off by 5 hours, which happens to be my offset from UTC. My guess is that since

[weewx-user] Re: Upgrade PWS- WLL or WiFiLogger2?

2020-10-06 Thread gary....@gmail.com
Thanks for the Linux version of the script. On Tuesday, October 6, 2020 at 4:33:35 AM UTC-4 mh081...@gmail.com wrote: > Thanks for the script. I changed it to be runnable from raspberry pi > (Debian 10.4) > > #!/bin/sh > # Shell script to restart the weatherLogger wifi device in the Davis > Van

[weewx-user] Re: Upgrade PWS- WLL or WiFiLogger2?

2020-10-06 Thread gary....@gmail.com
That is the information I was looking for. I plan to run it with Rich's MQTTSubscribe. Then the WiFiLogger2 will simply write to my mosquitto server every 3 seconds allowing it to talk with the console at will. WeeWX will handle all other reporting. Wojtek is a great resource, I have been exchang

Re: [weewx-user] file txt to import in weewx

2020-10-06 Thread Tom Keffer
Make sure you have read the section *Porting to new hardware *. In particular, the section *Implement the driver * . LOOP packets and archive records should contain *the amount of rain that fell* during the LOOP packet period or the archive interval, respectively, as field "rain". This is what is

[weewx-user] Re: Slightly OT: My Vantage Vue is dying

2020-10-06 Thread 'Chris Schram' via weewx-user
On 2020-10-04, Tom Keffer wrote: > --e9d72205b0dbe93f > Content-Type: text/plain; charset="UTF-8" > > I would ask Davis about your upgrade options. Their support is very good. I have posted this same question to Davis support, but, maybe due to COVID, they are being quite slow to resp

Re: [weewx-user] file txt to import in weewx

2020-10-06 Thread Sébastien F4GQK
*What exactly does this mean?* * but I still have 0 in the cumulative rainfall * It's more that: Today's Rain = 00 mm Le lundi 5 octobre 2020 à 23:08:56 UTC+2, gjr80 a écrit : > Hi, > > What exactly does this mean? > > but I still have 0 in the cumulative rainfall >> > > Does this mean y

Re: [weewx-user] Re: Upgrade Belchertown 1.2: website in coma

2020-10-06 Thread blee...@xs4all.nl
Hoi Arend, MIRACLE! Today nothing changed in any file. Before lunch I was kind of hopeless, after lunch everything is up and running... Should I have lunch more often? In any case, thank you for your tips! Regards, Keimpe Op dinsdag 6 oktober 2020 om 12:28:21 UTC+2 schreef blee...@xs4all.nl:

Re: [weewx-user] Re: Upgrade Belchertown 1.2: website in coma

2020-10-06 Thread blee...@xs4all.nl
Hoi Arend, Another striking point: the texts in the generated pages do not match the config file: *index.html ('about')*: Oentsjerk Weather Conditions http://oentsjerk.eu/"; /> http://oentsjerk.eu/";

Re: [weewx-user] Re: Upgrade Belchertown 1.2: website in coma

2020-10-06 Thread blee...@xs4all.nl
Hoi Arend, Another striking point: the texts in the generated pages do not match the config file: *index.html ('about')*: Oentsjerk Weather Conditions http://oentsjerk.eu/"; /> http://oentsjerk.eu/";

Re: [weewx-user] Re: Upgrade Belchertown 1.2: website in coma

2020-10-06 Thread Keimpe Bleeker
Hoi Arend, Thanks for your response. The extra " has been fixed. The Belchertown /js/belchertown.js.tmpl is in the right place, the Cheetah group in skin.conf is exactly as you described. Json files with forecast and earthquake data are correctly downloaded and placed in /home/weewx/public_html/be

[weewx-user] Re: Upgrade PWS- WLL or WiFiLogger2?

2020-10-06 Thread mh081...@gmail.com
Thanks for the script. I changed it to be runnable from raspberry pi (Debian 10.4) #!/bin/sh # Shell script to restart the weatherLogger wifi device in the Davis Vantage Pro 2 in the Harbormaster Building # The weather logger tends to disconnect from network every 4 days causing weewx to crash

Re: [weewx-user] Register your WeeWX station!

2020-10-06 Thread Vetti52
That's it! thanks tke...@gmail.com schrieb am Montag, 5. Oktober 2020 um 23:26:19 UTC+2: > I'm seeing an error on the server end: "station_url cannot contain single > quotes". > > Not exactly sure what that means. Try using the URL > https://www.windy.com/station/pws-f069b42a, without any quote

[weewx-user] Re: weewx.engine: Clock error

2020-10-06 Thread David Schulz
Sorry forgot something. It's KVM running on proxmox. lsb_release -a && uname -a No LSB modules are available. Distributor ID: Ubuntu Description:Ubuntu 20.04.1 LTS Release:20.04 Codename: focal Linux weather 5.4.0-48-generic #52-Ubuntu SMP Thu Sep 10 10:58:49 UTC 2020 x86_64 x86

[weewx-user] weewx.engine: Clock error

2020-10-06 Thread David Schulz
Hello, I have a question. How do I get rid of this message or can I ignore this message? It is an info and not an error. cat /var/log/syslog | grep weewx | grep -i error Oct 5 23:25:08 weather weewx[6816] INFO weewx.engine: Clock error is -0.15 seconds (positive is fast) Oct 5 23:30:31 weath

[weewx-user] Re: Upgrade PWS- WLL or WiFiLogger2?

2020-10-06 Thread jerry...@gmail.com
WifiLogger2 doesn't have an ssh port open, but it does respond on port 80 to a restart command from http. Under macOS I use the shell script command to open the Safair browser to the restart javascript command. #!/bin/sh # Shell script to restart the weatherLogger wifi device in the Davis Vanta

[weewx-user] Re: Upgrade PWS- WLL or WiFiLogger2?

2020-10-06 Thread mh081...@gmail.com
Hi, can you provide me this shell script to restart WifiLogger2 by cron? How did you connect to WifiLogger2 remotely? I have the same problem that WifiLogger2 disconnects from wlan after several days. jerry...@gmail.com schrieb am Dienstag, 6. Oktober 2020 um 09:15:11 UTC+2: > I recently swi

[weewx-user] Re: Upgrade PWS- WLL or WiFiLogger2?

2020-10-06 Thread jerry...@gmail.com
I recently switched from a 3 hop retransmit across 1000 ft by multiple Davis Vantage Pro2 links to WiFiLogger2 across an AirMax backhaul and the weewx server has been running well for several months. I had one problem with the WiFiLogger2. It seemed to disconnect from its vLAN network every 4