[weewx-user] Weewx without Station

My WeatherIP from Ventage plus 2 is defective. I import the current data. Can I operate weewx without a station? I have not found a way to set the weewx.conf so that there are no errors. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To

[weewx-user] gw1000 - wh41 wh57 battery values

i have been tracking battery and signal values for 36 hours for my various sensors hanging off a gw1000. for wh41 and wh57 i expected to see values 0-5, but i have see other values. wh41 has shown 15 quite often. wh57 has shown 255 once. 15 and 255 look suspiciously like bit masks. i should add

[weewx-user] AQI service failed...

Hi all, Everything was running just fine until 6 days ago and now this happens... Apr 21 08:40:15 metoffice weewx[16823] INFO weewx.restx: MQTT: Published record 2021-04-21 08:40:15 AEST (1618958415) Apr 21 08:40:15 metoffice /weewxd: AqiService: ValueError AQI calculation for pm2_5 on

Re: [weewx-user] Add Trend Line to Graph - Belchertown

I added the line to the belcherton skin.conf file with a value of 1, and a value of 4. I restarted Weewx each time I made the change and allowed a full run... but no change to the graph. On Tuesday, April 20, 2021 at 4:59:30 PM UTC-4 peterq...@gmail.com wrote: > Yes. I had an issue with it

Re: [weewx-user] Add Trend Line to Graph - Belchertown

Yes. I had an issue with it when adding a rolling ave. The default value was changed in 4.0 I think so it may or may not be what's happening. On Tue, Apr 20, 2021, 1:50 PM Topslakr Topslakr wrote: > Thanks. > > Found it here: https://weewx.com/docs/customizing.htm#line_gap_fraction > > I'll see

Re: [weewx-user] Add Trend Line to Graph - Belchertown

Thanks. Found it here: https://weewx.com/docs/customizing.htm#line_gap_fraction I'll see what I can find. Perhaps there is a small gap in data or something preventing it from drawing? Is that what you're thinking? On Tuesday, April 20, 2021 at 4:42:42 PM UTC-4 peterq...@gmail.com wrote: >

[weewx-user] Add Trend Line to Graph - Belchertown

Hello, I have been using the excellent Belchertown skin (Thank you Pat!) for my Weewx system and I'd like to know if it's possible to add a trend line, or an average line, to some graphs. Specifically, I'm looking to add this to my soil temperature graph. I have attempted to do so, but have

Re: [weewx-user] Weatherlink IP no function

Thanks pa...@pauland.net schrieb am Dienstag, 20. April 2021 um 17:27:22 UTC+2: > Hello Herbert, > My choice would be the USB Data Logger . Because the Raspberry PI , and > many other modern computers,does not have a COMM port, you would have to > add a COMM port or use a SERIAL to USB

Re: [weewx-user] Weatherlink IP no function

Hello Herbert, My choice would be the USB Data Logger . Because the Raspberry PI , and many other modern computers,does not have a COMM port, you would have to add a COMM port or use a SERIAL to USB adapter. Many years ago the Davis USB Data Logger seemed to have issues and it seemed better to get

Re: [weewx-user] Weatherlink IP no function

These days, the 6510USB version works best. Serial ports are extremely rare now. On Tue, Apr 20, 2021 at 7:27 AM Herbert Eberhardt wrote: > Hallo, after many years the Weatherlink IP no function, no LED, no answer. > I tried many time to plug off and on, wait 30min and more. > > I have a

[weewx-user] Weatherlink IP no function

Hallo, after many years the Weatherlink IP no function, no LED, no answer. I tried many time to plug off and on, wait 30min and more. I have a Vantage Pro 2 and use an Raspberry Pi for weewx. I have to buy a new communication port, the Weatherlink IP ist old and not avvailable. I see the Davis

[weewx-user] Problem with barometerRate WeeWX

Hello, I have a problem with using the barometerRate variable. In skin : $obs.label.barometerRate $current.barometerRate And the result in HTML is : Barometer Change Rate ?'barometerRate'? I don't understand why the "$current.barometerRate" variable is not reconize Where is the problem ?