Re: [weewx-user] WDC Skin

And that's another reasonable improvement! That's the so-called aggregate_interval. I added another issue (https://github.com/Daveiano/weewx-wdc/issues/55), which will be available in a future release. But where do you observe a 15 minutes interval? On the index page, it should be set to 30

[weewx-user] Re: Recommends for new station under 300

You want to learn more about the FineOffset / Ecowitt weather station and sensor "ecosystem", look up https://www.wxforum.net/index.php?topic=40730.0 For prices of stations/combinations check www.ecowitt.com - depending on your location there may also be resellers of the same hardware with a

[weewx-user] Re: Recommends for new station under 300

If you aren't concerned about a console you can get set up for half of your $300 budget. In fact you can buy two systems. (Keep one as a spare) I use the Ambient Weather WS-2902 array ($132) and the Ecowitt GW-1100 ($30) The array is accurate, has spare parts readily available and is well

[weewx-user] Re: Recommends for new station under 300

If you can get one of these Weather stations in your location: Bresser PC 5 in 1 - 7002571 Logia 5-in-1 PC - LOWSB510PB They are well below your budget, buffer 50 days worth of data, are reasonably accurate and have usb connection for PC (and hence weewx support). Make sure the console

Re: [weewx-user] Re: Weewx and Smart Meters

I have to jump on this bandwagon - I have the influx/grafana and weewx infrastructure in place. You guys have inspired my next project... On Wed, Aug 10, 2022 at 9:17 AM matthew wall wrote: > i have been combining data from weewx with data from brultech devices > (gem, ecm1240) since 2011 or

Re: [weewx-user] WS23xxDriver error

my bad, I supposed to use wh23xx driver, not ws23xx driver I'm using USB port but not serial port /dev/usb/hiddev0 It works well now! thanks On Wednesday, August 10, 2022 at 8:20:15 PM UTC+5:30 tke...@gmail.com wrote: > The port should be a serial port, not a USB port. Something /dev/ttyUSB0.

Re: [weewx-user] WS23xxDriver error

my bad, I supposed to use wh23xx driver, not ws23xx driver I'm using USB port but not serial port /dev/usb/hiddev0 On Wednesday, August 10, 2022 at 8:20:15 PM UTC+5:30 tke...@gmail.com wrote: > The port should be a serial port, not a USB port. Something /dev/ttyUSB0. > > Unplug your station,

[weewx-user] Re: Recommends for new station under 300

And https://www.scientificsales.com - both places have good prices and provide nice customer service... On Wednesday, August 10, 2022 at 8:25:30 AM UTC-7 storm...@gmail.com wrote: > Check out Scaled Instruments: > > >

[weewx-user] Re: Recommends for new station under 300

Check out Scaled Instruments: https://www.scaledinstruments.com/product-category/davis-instruments/complete-weather-stations/vantage-vue-series/ On Wednesday, August 10, 2022 at 9:50:13 AM UTC-4 kavanag...@gmail.com wrote: > I have been running an Acurite 5n1 since 2018, using sdr, as well as

Re: [weewx-user] Weewx and Smart Meters

Well that has certainly given me something to chew on, thanks! On Wednesday, 10 August 2022 at 15:15:02 UTC+1 tke...@gmail.com wrote: > I've been recording data from a Brultech GEM > using WeeWX for about 5 years now. > The driver

Re: [weewx-user] Recommends for new station under 300

If you can stretch the budget a bit, the Vantage Vue is one of the best. About $350. If you can't, it's hard to beat the Ecowitt GW series. As little as $180 for the GW1101 . On Wed, Aug 10, 2022 at 6:50 AM Nick Kavanagh wrote: > I have been

Re: [weewx-user] WS23xxDriver error

The port should be a serial port, not a USB port. Something /dev/ttyUSB0. Unplug your station, then plug it back in, then use the command 'dmesg'. It may (or may not) tell you what the serial port is that it connected to. On Tue, Aug 9, 2022 at 9:03 PM prra...@gmail.com wrote: > Many thanks,

[weewx-user] Re: Recommends for new station under 300

I've used a Davis Vantage Pro2 for years and would highly recommend it. Anemometer has 100' of wire to attach itself to the base sensor suite, so it can go up on a roof-mounted pole (for example) while the main sensor suite is mounted somewhat lower - it does require occasional cleaning and

Re: [weewx-user] Weewx and Smart Meters

I've been recording data from a Brultech GEM using WeeWX for about 5 years now. The driver is rather specialized, but it may give you some ideas. On Wed, Aug 10, 2022 at 5:55 AM ian...@kinnon.org wrote: > Has

[weewx-user] Re: Weewx-csv issue, rain and rainRate

Thanks Vince, you have already helped by asking the right question. It look's like an interpretation issue on my part. I started to prepare various extract files to send you and in the process did some check totals and the data is there, it's just not what I was expecting. The CSV files are

Re: [weewx-user] WDC Skin

I would like to propose a further improvement. Currently the graphs have a resolution of 15 minutes. It would be interesting to be able to customize this resolution for each individual chart. Best Regards Il giorno lunedì 8 agosto 2022 alle 04:57:55 UTC+2 david@gmail.com ha scritto: > Hi

[weewx-user] Recommends for new station under 300

I have been running an Acurite 5n1 since 2018, using sdr, as well as multiple esp-8266 with been or bmp280's using matter. The 5n1 has given up the ghost. I would like to replace it with something similar, as I already understand sdr use within weewx. However, I am also interested in using more

[weewx-user] Weewx and Smart Meters

Has anybody tried adding data from their smart meter to Weewx? I can grab the data with https://pypi.org/project/pyglowmarkt/ would be nice to be able to graph it as well. This is in the UK and I created an account with Glowmarkt who can access the raw data directly Thanks Ian -- You