An old log entry remained after some earlier restructuring, try b4:
wget
https://raw.githubusercontent.com/gjr80/weewx-gw1000/master/bin/user/gw1000.py
Gary
On Tuesday 23 January 2024 at 04:55:32 UTC+10 michael.k...@gmx.at wrote:
> When I configure like so
> [GW1000]
> debug_loop = True
>
When I configure like so
[GW1000]
debug_loop = True
# This section is for the Ecowitt Gateway driver.
# How often to poll the API, default is every 20 seconds:
poll_interval = 10
ip_address = 10.0.1.85
max_tries = 360
# The driver to use:
driver =
I run weewx as root:
sudo systemctl start weewx
If I set higher port (8080), weewx starts but I have empty queue for
interceptor.
niedziela, 21 stycznia 2024 o 18:49:48 UTC+1 matthew wall napisał(a):
> On Sunday, January 21, 2024 at 12:23:34 PM UTC-5 Tomasz Lewicki wrote:
>
>
> Jan 21
Hello Gary,
I've put what you asked for below.
The problem is systematic (this is an advantage in some way...)
I think you are right about the problem of a field in the database... But
which one?
SteelSeries was working perfectly BEFORE I added/deleted the data base. I
didn't notice the
On Monday, January 22, 2024 at 2:46:51 AM UTC-5 ken.r...@gmail.com wrote:
Recently I moved home and lost a sensor in one of the packing boxes and
then found it again after the battery had been flat for almost 6 months. It
displays temperature and humidity and the repeater flickers when it
On Monday, January 22, 2024 at 2:46:51 AM UTC-5 ken.r...@gmail.com wrote:
I setup Weewx 3.9.1 about 6yrs ago when Acurite dropped support for their
SmartHub, and haven't upgraded since.
Recently I moved home and lost a sensor in one of the packing boxes and
then found it again after the
What driver are you using?
On Monday, January 22, 2024 at 2:46:51 AM UTC-5 ken.r...@gmail.com wrote:
> I setup Weewx 3.9.1 about 6yrs ago when Acurite dropped support for their
> SmartHub, and haven't upgraded since.
>
> Recently I moved home and lost a sensor in one of the packing boxes and
>
You have a heavily customised install. Do you get the error with the
gauge-data template every report cycle? It would be useful to see the
archive record used by WeeWX when the gauge-data template error occurs. If
it is every report cycle then just run WeeWX directl
Without seeing some logs it's hard to say much more than some general
comments. I would suggest leaving debug = 0, but set debug_loop = True
under both [GW1000] and [GW1000Service] stanzas in weewx.conf. Restart
WeeWX,. This will log the field maps in use as well as a lot of packets in
various
