;>>> weewx.conf, restart weewxd, let it run for a reporting cycle of two, then
>>>>> post the log. Option debug=2 will log the full URL used for the GET to
>>>>> the
>>>>> registry.
>>>>>
>>>>>
>>>>>
&
th a load
>>>>> balancing server, or something like that. It could be a problem on the
>>>>> windguru end.
>>>>>
>>>>> There's also a pending "pull request
>>>>> <https://github.com/claudobahn/weewx-windguru/pull/4>" t
updates how
> authentication is done. Perhaps that's the problem? Don't know. You can
> give it a try.
>
> -tk
>
> On Sun, May 21, 2023 at 8:47 AM seano...@gmail.com
> wrote:
>
>> Thank you for the replies and suggestions. The logging is now working to
>
us causing
>> your runtime error
>>
>> i think in macOS the default behaviour is to log under /var/log/system.log
>>
>> once the default configuration is working, no doubt you will add some
>> entries to [Logging] to use a file of your choice, such as
>> /var/l
.
Appreciate the help, thanks.
On Sunday, May 21, 2023 at 12:52:13 PM UTC+4 seano...@gmail.com wrote:
> Hi Tom,
>
> Thanks for the reply. You are right, I removed the [Logging] section from
> the weewx.conf file and then it ran successfully and I can see all the
> output. N
fill, 1)
ValueError: y1 must be greater than or equal to y0
On Saturday, May 20, 2023 at 3:40:00 PM UTC+4 Tom Keffer wrote:
> By default, V4.10.2 does not include a 'rotate' logging handler. It has to
> be added.
>
> By any chance, do you have a [Logging] section in weewx.conf? If
Hi,
I seem to be having this same error but I don't understand exactly how to
rectify it. Please can you explain in a simple way how to apply the patch?
Appreciate it, thank you.
On Wednesday, April 12, 2023 at 1:01:59 AM UTC+4 Marius Schamschula wrote:
> I ran into the same error after a
Hi,
I have done many successful installations of weewx on raspberry pi and I
previously installed weewx on MacOS successfully. About a month ago, the
MacOS station stopped reporting so I have been troubleshooting it. I can't
figure out what is going on because I am very poor with python. Can
Hi,
I have a weather station with Raspberry Pi and a WeatherFlow Tempest
sensor. It has been working perfectly for a few months. Suddenly it is
reporting an incorrect wind speed on windguru. On the Weatherflow app for
iPhone it says 10 knots which is accurate according to the reality.
Just a quick update on this...
I managed to get my weather flow tempest weather station broadcasting to
windguru. This was done by using the weewx extension
https://github.com/captain-coredump/weatherflow-udp
Thanks for all the support. And a big thank you to everyone involved in
creating
Just a quick update.
One last attempt to get weewx running at boot before I drive out and format
the microsd card to start fresh. I followed the below article to
automatically run weewx using systemd and it is working now! Thanks for all
the support.
Hi,
I originally had weewx installed using the DEB package which was fine. With
the intention of using multiple instances of weewx for different stations,
I have uninstalled that and then I re-installed weewx using setup.py to the
/home/weewx/
It works perfectly when I run it directly in
Hi,
I had a problem before were rtl-sdr got updated and something changed, then
suddenly weewx was receiving an incorrect unit and converting incorrectly
and as a result of that, windguru was reporting wind that was much stronger
that it really was. I seem to be having the same problem again
Hi,
After many months of not being able to identify why an Acurite 5-in-1
randomly goes offline or broadcasts a zero wind speed when the wind is
often above 10 knots, I have decided to try a different station. I have
purchased a weather flow tempest which works really well using the app.
I am
I have a Acurite 5-in-1 and a raspberry pi with an SDR adaptor that
receives the packets which are then interpreted by weewx and uploaded to
windguru. There is something weird happening that does not make sense to me.
Randomly, for a reason that I cannot understand, the weather station will
Hi All,
Thanks for the feedback, very much appreciated.
@mksm... thanks, I will try your suggestions. Funny because I was
originally told to use a 17cm antenna, I'm surprised to hear you mention
31cm ??
Regarding the SDR, it is a solution to capture the broadcasts from the
Acurite 5n1 sensor
*UPDATE*:
After 3 days of working perfectly, the pi stopped receiving from the
weather sensor and has not received a single transmission in 48 hours. When
I close weewx and run rtf_433 directly, no sensors are seen either. Today I
collected the devices and brought them home and then plugged
t;
>
>
>
> *From:* weewx...@googlegroups.com *On Behalf
> Of *seano...@gmail.com
> *Sent:* Monday, January 25, 2021 1:22 AM
> *To:* weewx-user
> *Subject:* [weewx-user] Re: Acurite 5in1 and rtl_sdr
>
>
>
> Hi,
>
>
>
> Just a quick nudge about this
Hi,
Just a quick nudge about this. The Acurite 5-in-1 and the SDR are working,
but there are still times when minutes or hours can pass where the SDR is
not receiving any packets from the sensor, and therefore no broadcasts to
wind guru. Has anyone got any good ideas on troubleshooting this?
with respect with each other
>> until they end up being transmitted at exactly the same time and the
>> receiver can not discriminate them. After half a day or so the situation
>> recovers and is fine for a month or more.
>>
>> Peter
>>
>> On Thursday, October 2
Just an update, i think i worked it out...
My [[sensor_map] did not have an underscore between sensor and map.
It's working now.
On Friday, December 18, 2020 at 5:24:02 PM UTC+4 seano...@gmail.com wrote:
> Hi,
>
> I have built a few weather stations so i'm familiar with th
Hi,
I have built a few weather stations so i'm familiar with the process but
for some reason i can't understand why weewx is not generating reports when
set to SDR mode. Because it works as soon as i change it into simulator
mode.
In simulator mode i can use a local computer to browse
Hi,
My station has been running weewx + rt_sdr for a year and all is working
well. Weewx receives the station data and broadcasts it to windguru.
However, there is an occasional problem that happens and i can't figure out
what the cause is. All of a sudden, rtl_433 stops receiving from the
23 matches
Mail list logo