[weewx-user] Re: Weewx crash catcher

Got one last night Feb 25 22:29:41 server weewx[7721]: wmr200: MainThread: I Driver gracefully exiting Feb 25 22:29:41 server weewx[7721]: engine: Caught unrecoverable exception in engine: Feb 25 22:29:41 server weewx[7721]: Non-positive value for record field 'interval': 0 Feb 25

[weewx-user] error in wiki for owm install

I have just gone through trying to install owm to put data to instead of WU and after being frustrated for ages I finally found the problem. Matthew's instructions are perfect except that when using postman the setting for "Content-Type" the value should be application/json and not

[weewx-user] FTPS over TLS problem (time out)

Hello, I'm trying to connect to an FTPS (implicit TLS) and get a time out. If I do a test with FileZilla, first I have to accept the certificate and then I can connect without problems. Set passive mode to 1 and secure_ftp to True. The port indicated 990. I use a raspberry with raspbian. I

Re: [weewx-user] Re: Weewx crash catcher

Is this, by any chance, a WMR200 or WS28xx? -tk On Tue, Feb 26, 2019 at 4:30 AM Mark Jenks wrote: > Got one last night > > Feb 25 22:29:41 server weewx[7721]: wmr200: MainThread: I Driver > gracefully exiting > Feb 25 22:29:41 server weewx[7721]: engine: Caught unrecoverable exception > in

Re: [weewx-user] Re: Second crash after 11 days

Weewx has been running for 24 hours now with the 11rc3 driver. Top shows 4.4% memory usage v 7.5% for the 0.22 driver. A previous run of 11rc3 resulted in 4.8% after 31 hours v 9.0% for v 0.22 So obviously there is something going on with the newer drivers, but I cannot hazard a guess as to

[weewx-user] vantage.py error setting humidity offset

I located an error in vantage.py. I do not know if this has been reported but in setCalibrationHumid the "If" statement left out the "not" and the results is that "offset" in the range of -100 to 100 is rejected as being out of range when attempting to use "wee_device --set-offset". The

[weewx-user] database repair - dropping recent archive records when console is still ok

I have a weewx installation with Davis serial. It's been running reliably for over a year, and I just updated to 3.9 after following git master for a while. (I don't think 3.9 has anything to do with my issues.) My computer is an RPI3 running netbsd-8, with a USB/serial adaptor, going to an

Re: [weewx-user] Cleaning up old 'bad' data

The bad data has been purged. All reports; i.e., day, week, month & year, are showing no rain information - bad or otherwise. Thanks again for all of your encouragement which in and by itself is much appreciated. In answer to your question, the WU data doesn't come from weewx; instead, the

[weewx-user] Re: How to differentiate when using two SDR usb dongles for two different frequencies.

Did you try "rtl_eeprom" to change the dongle's serial number. On Monday, February 25, 2019 at 6:40:42 PM UTC-5, steep...@gmail.com wrote: > > Thanks Ruben, > > I will give a try and let you know how it goes. > > On Monday, February 25, 2019 at 9:43:24 PM UTC, Ruben Navarro Huedo wrote: >> >>

[weewx-user] Re: How to differentiate when using two SDR usb dongles for two different frequencies.

I'm not sure if this will help as I don't have to point my old USB weather station device to WeeWX anymore but have a couple of others that used to cause me grief. I use a RPi and use udev rules to distinguish my identical serial - USB adaptors having the same ID by using the port name. The

[weewx-user] Re: Mount Washington hits record 171mph wind gust

HAHAHA !! On Tuesday, February 26, 2019 at 7:13:08 PM UTC-8, vince wrote: > > > > But was it measured by a station running weewx ? > Lets get our priorities straight :-) > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To

[weewx-user] Re: Mount Washington hits record 171mph wind gust

On Tuesday, February 26, 2019 at 6:48:18 PM UTC-8, Pat wrote: > > Mount Washington Observatory, 2/25/19 at 7:10 PM: Current peak wind is >> 171mph! Surpassing the previous February wind record (166 MPH set in 1972). > > > > But was it measured by a station running weewx ? Lets get our

[weewx-user] Ambient weather WS-2902a

I am wanting to upgrade a bit, mainly because the Acurite 5 in 1 doesn't do solar radiation, and I am looking at the Ambient Weather WS-2902A (retired and can't be as spend-thrifty as I was before) and I guess what I am asking is whether it is a good choice? I assume there are no compatibility

[weewx-user] Re: Ambient weather WS-2902a

Same one I have for the saame reason. Works very well with weeWX. Search the group for help installing it as I helped a couple people already. You will need to buy a raspberry pi in order for it to work. On Tuesday, February 26, 2019 at 10:23:13 PM UTC-8, John Clark wrote: > > I am wanting to

[weewx-user] Mount Washington hits record 171mph wind gust

A little off topic, but I thought this was interesting enough to share. It was pretty windy here in the Northeast USA yesterday, but not like this

[weewx-user] Moving from PI2B (weewx 3.6.2) to PI3B+ (weewx 3.9.1), how to handle custom schema after copying weewx.sdb

In my old pi2 (weewx 3.6.2), has schema extended for two add'l fields for Lake Elevation, and Lake Wave Height. Has been working great, now migrating to latest PI3B+ & weewx 3.9.1 The old 3.6.2 weewx.conf has: [Engine][[Services]] process_services = weewx.engine.StdConvert, weewx.

Re: [weewx-user] database repair - dropping recent archive records when console is still ok

You could try using wee_device --dump . It will dump all the records in the logger. Most will be duplicates, but it will recover the missing records. Then rebuild the daily summaries. On Tue, Feb 26, 2019 at 7:32 AM Greg Troxel

Re: [weewx-user] vantage.py error setting humidity offset

Right you are! Fixed in commit febcf85 . Thanks, Bob. On Tue, Feb 26, 2019 at 8:39 AM bob_linux_user wrote: > I located an error in vantage.py. I do not know if this has been reported > but in setCalibrationHumid

[weewx-user] Re: Moving from PI2B (weewx 3.6.2) to PI3B+ (weewx 3.9.1), how to handle custom schema after copying weewx.sdb

Tom On my previous system I had files edited or created, including, weewx/bin/user/extensions.py, lakedata.py, and weewx/bin/weewx/units.py (which I remember you saying something a few years ago about how I should not have had to edit that, but I couldn't get it to take my added lake fields

Re: [weewx-user] Re: Second crash after 11 days

We will solve the problem with the newer drivers!  Try this version. It reads data byte-by-byte, just like 0.11rc3. -tk On Tue, Feb 26, 2019 at 1:40 PM Steve2Q wrote: > Weewx has been running for 24 hours now with the 11rc3 driver. Top shows > 4.4% memory usage v 7.5% for the 0.22 driver. A