[weewx-user] Re: Weewx tag to show last time it rained

Hi Could you write a small recap tuto to explain the different actions and modifications, I would like install this interesting functionnality and I am not an expert in Linux and weewx... Is it possible to include this in the Belchertown development git? Many thanks Le lundi 22 juin 2020 à

[weewx-user] Re: SDR and BME280 Data using Acurite Sensors

I have no idea what is going on then, mine is working as expected with the following in weewx.conf. [Bme280wx] # Options for extension for BME280 pressure/temperature/humidity sensor temperature_must_have = outTemp humidityKeys = inHumidity pressureKeys = pressure

[weewx-user] Re: Belchertown Difference for the same temperature type

Kannst du deine extensions.py bitte hier reinstellen? Manfred Maier schrieb am Freitag, 26. Juni 2020 um 10:41:53 UTC+2: > Ich habe meine Datenbank inzwischen schon zweimal erweitert. Einmal nach > ca. drei Wochen (um appTemp und maxSolarRad in der Datenbank zu haben) und > dann nochmal

[weewx-user] Re: Belchertown Difference for the same temperature type

@Manfred: Hast du dies schon mal gemacht? Wenn ja ohne Probleme? Bleibt dies eine einmalige Sache oder wird dies bei jedem Update von weewx oder Belchertown wieder fällig? Wie muss dann die extensions.py aussehen? Ich verwende eine externe Mariadb10, wird nun eine neue DB gemacht oder die

[weewx-user] Re: Belchertown Difference for the same temperature type

Ich habe meine Datenbank inzwischen schon zweimal erweitert. Einmal nach ca. drei Wochen (um appTemp und maxSolarRad in der Datenbank zu haben) und dann nochmal letzte Woche, um endlich auch die Anzahl der Sonnenstunden schön darstellen zu können. Beide Male hat es absolut ohne Probleme

[weewx-user] Re: Belchertown Difference for the same temperature type

Sorry. Hatte ich vergessen. geni08...@gmail.com schrieb am Freitag, 26. Juni 2020 um 11:13:44 UTC+2: > Kannst du deine extensions.py bitte hier reinstellen? > > > Manfred Maier schrieb am Freitag, 26. Juni 2020 um 10:41:53 UTC+2: > >> Ich habe meine Datenbank inzwischen schon zweimal erweitert.

Re: [weewx-user] Update interval less than 300 seconds?

Hello, I installed your extension but the file loop-data.txt will not create. I changed weewx.conf to loop_data_dir = /var/www/html/weewx. Thx for any help jo...@johnkline.com schrieb am Freitag, 26. Juni 2020 um 02:19:42 UTC+2: > I have an extension you could try: >

[weewx-user] Re: SDR and BME280 Data using Acurite Sensors

Just want to post that I resolved the issue. Looks like the [Bme280wx] section was the culprit. The "_must_have" section needed to equal a variable that was already being read by the SDR section. So, when I was defining "temperatureKeys=inTemp" and also defining the "_must_have=inTemp" this

[weewx-user] Re: SDR and BME280 Data using Acurite Sensors

Hi Troy, Is your bme280 producing lots of entries in the syslog ?? I'm currently running my test system manually and I'm getting a 'bme280:' entry in the syslog time a loop is generated. Gary -- You received this message because you are subscribed to the Google Groups "weewx-user"

[weewx-user] Re: Belchertown Difference for the same temperature type

@Manfred: Danke, werde dann mal die nächste Woche einen ersten Versuch starten :) Manfred Maier schrieb am Freitag, 26. Juni 2020 um 11:20:48 UTC+2: > Sorry. Hatte ich vergessen. > > geni08...@gmail.com schrieb am Freitag, 26. Juni 2020 um 11:13:44 UTC+2: > >> Kannst du deine extensions.py

[weewx-user] Re: SDR and BME280 Data using Acurite Sensors

I don't know what is considered a lot but here is a snipit from the syslog: Jun 25 11:13:23 raspberrypi weewxd: bme280: BME280 data compensated_reading(id=7294ec37-8442-42eb-86bf-b93e8a0197c9, timestamp=2020-06-25 11:13:23.612755, temp=25.346 °C, pressure=1016.60 hPa, humidity=44.90 % rH) Jun

Re: [weewx-user] wee_config --reconfigure / weewx.conf / group_pressure

Fixed in commit 3f3af22 -tk On Sat, Jun 20, 2020 at 5:34 AM Tom Keffer wrote: > Right you are! Thanks, Joachim. > > I've created issue #576 to > track. > > -tk > > On

Re: [weewx-user] Update interval less than 300 seconds?

Well, I see loopdata in the log snippet you just sent. Would you try the grep again? grep loopdata /var/log/syslog And look for the loopdata file again? > On Jun 26, 2020, at 11:48 AM, Michael Meyer wrote: > >  > Yes I stopped, start and restart. > I will try to find out how to send files.

[weewx-user] Re: 2 systems in parallel. Meteobridge and Raspberry PI

Can I take this a little slower, pls? Doing ~ what Gert asked about, but I HAVE Weewx runnning on Rasp Pi taking data from Davis Vantage Pro console via datalogger with USB cable. It works great. I'd like to ADD a meteobridge (to post to Ambient Weather). In terms of hardware, are you

[weewx-user] Re: wee_import

This sounds correct - I have docker on Synology and Ubuntu platforms. They appear to implement logging in different ways. On Tuesday, 19 May 2020 18:59:40 UTC+10, gjr80 wrote: > > Hi, > > Sounds like a problem with WeeWX logging and docker rather than a > wee_import problem per se. You might

Re: [weewx-user] Update interval less than 300 seconds?

Not sure how to post files; but since you are running WeeWX 4 and Python 3. Did you restart WeeWX after you installed loopdata? It’s to imagine why you don’t see any occurrence of loopdata in the log? Do you see other weewx messages in the log? > On Jun 26, 2020, at 10:40 AM, Michael Meyer

Re: [weewx-user] Update interval less than 300 seconds?

Weewx 4.1.1 is running I have Python 3.7 on my rpi. Any idea why I can't post the created myfile here? I just can post pictures but no files! I can create an attachment but couldn't send? jo...@johnkline.com schrieb am Freitag, 26. Juni 2020 um 18:19:36 UTC+2: > It appears that loopdata isn’t

[weewx-user] Re: calculate rainRate for second rain gauge...?

Gary, thanks for that clarification. I'll have a look at the new feature if it will be released in the next weewx point release. As there there seems to be a rainRate software computation available, maybe this could be copied and rainRate substituted by hailRate to get the hailrate working

Re: [weewx-user] Update interval less than 300 seconds?

It appears that loopdata isn’t running. Let’s start with the obvious. As stated in the README: This extension requires Python 3 and WeeWX 4. Are you running WeeWX 4.x? Are you running Python 3? If are on WeeWX 4.x and Python 3, use the following guide to post the log and I’ll have a look.

[weewx-user] Re: Belchertown: current weather picture is missing.

Yes you need to use DarkSky or Aeris weather (with the 1.2 beta skin) On Friday, June 26, 2020 at 11:09:46 AM UTC-4, geni08...@gmail.com wrote: > > I have to configure or install so that this info picture is displayed? > [image: > belch07.jpg]What do > > It looks like this to me > [image:

[weewx-user] Belchertown: current weather picture is missing.

I have to configure or install so that this info picture is displayed? [image: belch07.jpg]What do It looks like this to me [image: belch08.jpg] -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving

Re: [weewx-user] Update interval less than 300 seconds?

Hi Michael, Would you send the output of (which assumes WeeWX is writing to /var/log/syslog)? grep loopdata /var/log/syslog Also, please cut and paste the loopdata section of weewx.conf. Lastly, please send a directory listing of /var/www/html/weewx Cheers, John > On Jun 26, 2020, at 3:07

[weewx-user] Re: How to tell weewx to expect metric or US when importing from a text file?

Hi Thanks so much for your help, I have a better understanding and have managed to get it working by modifying your example as needed. Initially WeeWX crashed with a syntax error on *else *but guessed it needed to say *else:* after noticing *try:* (without googling it) In my weewx.conf I have

[weewx-user] Belchertown: current weather picture is missing

What do I have to configure or install so that this info picture is displayed? It looks like this to me: -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to