Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Is there anyway I can help in getting the WeatherDisplay csv data into the weewx database..I have been away for a while so might have missed any updates on this project. On Thursday, 17 January 2019 22:40:45 UTC+13, monmul wrote: > > AwesomeI thought that weeimport could only deal with

Re: [weewx-user] Re: Creation of Cumulus realtime.txt file

Don't know, I thought realtime.txt was a product of Cumulus, does Cumulus accept it as a source? Guess that is something for the Cumulus folks. You might also want to have a look at the assumptions/limitations listed in the up front comments in bin/user/crt.py. On the face of it they do not

[weewx-user] Re: New WeeWx Pi SDR installationfor Acurite 5in1

Thanks for pointer - I knew it was something simple I was missing! I'll check that in the morning On Sunday, March 3, 2019 at 10:27:40 PM UTC-7, mwall wrote: > > > > On Sunday, March 3, 2019 at 11:38:02 PM UTC-5, AKing wrote: >> >> >> Mar 04 04:00:11 Weewx-pi weewx[1154]: engine: Unable to

[weewx-user] Re: New WeeWx Pi SDR installationfor Acurite 5in1

On Sunday, March 3, 2019 at 11:38:02 PM UTC-5, AKing wrote: > > > Mar 04 04:00:11 Weewx-pi weewx[1154]: engine: Unable to load driver: failed > to start process: [Errno 2] No such file or directory > > rtl_433 is not in the PATH in the environment in which weewx is running you must either

[weewx-user] New WeeWx Pi SDR installationfor Acurite 5in1

I just started setting up a WeeWx on a Raspberry Pi3 with an SDR to replace the cloud service that was shut off on 28 Feb, and have been having trouble getting it to start up. When I start up the driver using sudo PYTHONPATH=bin python bin/user/sdr.py --cmd="rtl_433 -M utc -F json -G" The

[weewx-user] WeeWx SDR Crashing

Occasionally (about once a week), weewx just seems to shut it self down. Debug output from the last one. I did a reboot and it errored again, so I did a physical power off and on, and that seem to clear it. Thinking it might be SDR dongle related? Open to additional ideas/places to look:

Re: [weewx-user] Re: Creation of Cumulus realtime.txt file

Would it be possible to run WeeWx and this CRT add-on to then be able to run Cumulus? My station is not directly supported by Cumulus. I thought this might be a way to feed data to Cumulus. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To

[weewx-user] Re: New setup on Pi w/bme280 and Acurite 5-in-1 via SDR

On Sunday, March 3, 2019 at 5:38:33 PM UTC-5, Matt Gordon wrote: > > As a follow up to this, it would appear that the SDR driver does not play > nice when using two acurite sensors. in my case i was reading > wind/precipitation from the 5-in-1 and temp and humidity from the 2-in-1. > As soon

[weewx-user] Re: NOAA Reports from imported Data

I'm not sure I have the full picture on exactly what data and NOAA reports you have/do not have over what period but the NOAA monthly reports require there to be at least one non-None barometer value for each day (ie any day with no barometer data will be skipped). For the NOAA yearly reports

[weewx-user] Re: New setup on Pi w/bme280 and Acurite 5-in-1 via SDR

As a follow up to this, it would appear that the SDR driver does not play nice when using two acurite sensors. in my case i was reading wind/precipitation from the 5-in-1 and temp and humidity from the 2-in-1. As soon as i commented out the readings from the 2-in-1 and then converted the

[weewx-user] Re: Belchertown skin 0.9 now available

Good news thank you On Sunday, March 3, 2019 at 4:35:49 PM UTC-5, Juan Antonio Mosquera wrote: > > ok, > > Now works again... with these changes... > > thanks. > > El domingo, 3 de marzo de 2019, 21:34:04 (UTC+1), Pat escribió: >> >> Juan, I made some changes. Can you try this and see if it

[weewx-user] Re: Belchertown skin 0.9 now available

ok, Now works again... with these changes... thanks. El domingo, 3 de marzo de 2019, 21:34:04 (UTC+1), Pat escribió: > > Juan, I made some changes. Can you try this and see if it helps? > > Copy these files and place them in these folders: > > bin/user/belchertown.py ---> >

[weewx-user] Re: weewx, SDR rtl_433 and USB, can you use data from both ? SDR station type with USB.

On Sunday, March 3, 2019 at 2:00:05 PM UTC-5, Ashley Gibbon wrote: > > > I have weewx working with on 433 mhz temp sensor with the station type set > to SDR. > Can you have the SDR get data from 915 mhz, and from 433 mhz. Has anyone > done that? > Can you add a USB weather station too or can you

[weewx-user] Re: Belchertown skin 0.9 now available

Juan, I made some changes. Can you try this and see if it helps? Copy these files and place them in these folders: bin/user/belchertown.py ---> https://raw.githubusercontent.com/poblabs/weewx-belchertown/32b30e6825ede95647f75488b400855a6d2b4a9e/bin/user/belchertown.py

[weewx-user] Tipping bucket rain gauge

I have a ISCO 674 Tipping Bucket Rain Gauge that I would like to integrate with WeeWX. The 674 output is a dry contact that changes state (trips) each time 0.01 inches of rainfall occurs. Any thoughts on how to accomplish this? -- You received this message because you are subscribed to

[weewx-user] Re: Belchertown skin 0.9 now available

I see now. What is your archive interval from weewx.conf? Looks like the new gapSize option isn't working well for you. On Sunday, March 3, 2019 at 3:12:57 PM UTC-5, Juan Antonio Mosquera wrote: > > Only work windDirection chart. > > El domingo, 3 de marzo de 2019, 20:46:50 (UTC+1), Pat

[weewx-user] Re: Belchertown skin 0.9 now available

sorry... my web www.meteomontaos.es part of weewx.conf [[Highcharts_Belchertown]] HTML_ROOT = /var/www/html/weewx/belchertown skin = Highcharts_Belchertown [[[Units]]] Groups group_altitude = meter group_degree_day

[weewx-user] Re: Belchertown skin 0.9 now available

Sorry... www.meteomontaos.es weewx.conf [[Highcharts_Belchertown]] HTML_ROOT = /var/www/html/weewx/belchertown skin = Highcharts_Belchertown [[[Units]]] Groups group_altitude = meter group_degree_day =

[weewx-user] Re: weewx, SDR rtl_433 and USB, can you use data from both ? SDR station type with USB.

On Sunday, March 3, 2019 at 11:00:05 AM UTC-8, Ashley Gibbon wrote: > > I have weewx working with on 433 mhz temp sensor with the station type set > to SDR. > Can you have the SDR get data from 915 mhz, and from 433 mhz. Has anyone > done that? > Can you add a USB weather station too or can you

[weewx-user] Re: Belchertown skin 0.9 now available

I need more information than that. A website? A post of your config files? On Sunday, March 3, 2019 at 2:39:13 PM UTC-5, Juan Antonio Mosquera wrote: > > Not... graphs not work... no errors in console... > > El domingo, 3 de marzo de 2019, 20:27:41 (UTC+1), Juan Antonio Mosquera > escribió: >>

[weewx-user] Re: Belchertown skin 0.9 now available

Not... graphs not work... no errors in console... El domingo, 3 de marzo de 2019, 20:27:41 (UTC+1), Juan Antonio Mosquera escribió: > > Hi, > > I updated to 0.9 version and.. not work highcharts graphs (today). week > works fine. > > conf problem? > > Thanks > > El viernes, 1 de marzo de 2019,

[weewx-user] Receiving Davis Vantage weather data with a RTL-SDR dongle

Recently my attention was brought to a SDR tool for receiving wireless sensor data (TFA IT+ KlimaLogg Pro, LaCrosse, WeatherHub). See: https://github.com/baycom/tfrec. I wrote a weewx driver which parsed and stored the tfrec data of my 9 KlimaLogg sensors. The weewx driver can be found here:

[weewx-user] Re: modification index.html.tmpl in

Thank you for your help I modified this file without paying attention; I thought the # were comments. I go ahead now. thanks Patrick On Sunday, March 3, 2019 at 7:29:28 PM UTC+1, Patrick Tranchant wrote: > > hello, > > I recently installed Belchertown 0.9; Goog Job and Skin. > I modified

[weewx-user] Re: Belchertown skin 0.9 now available

Hi, I updated to 0.9 version and.. not work highcharts graphs (today). week works fine. conf problem? Thanks El viernes, 1 de marzo de 2019, 1:50:34 (UTC+1), Pat escribió: > > I've just released Belchertown skin 0.9. You can read the updates and > download it here:

Re: [weewx-user] Belchertown skin 0.9 now available

Ah, perfect. My brain has gone a little fried with all the changes lately. Thanks for the reminder! Good thing I have it documented. On Sunday, March 3, 2019 at 2:13:43 PM UTC-5, kutz...@gmail.com wrote: > > I have disconnect_live_website_visitor = 0 set in weewx.conf. That > prevents timing

Re: [weewx-user] Belchertown skin 0.9 now available

I have disconnect_live_website_visitor = 0 set in weewx.conf. That prevents timing out live updates with MQTT per your README. The number of seconds after a visitor has loaded your page that we > disconnect them from the live streaming updates. The idea here is to save > your broker from a

[weewx-user] Re: modification index.html.tmpl in

You probably have too many #end if like Jacques mentioned. At top of the page you also need to add in the JavaScript that'll fill that data in for the moment.js formatting. Look in the source for the other 's around that one to see. On Sunday, March 3, 2019 at 1:29:28 PM UTC-5, Patrick

[weewx-user] Re: Lake and pool water temperature weather station?

Various ways to connect; USB, IP, SDR. Quick search of the user group, looks like Weewx supports the WS-2902a. Using a SDR is a valid option to interface with the WS-1900 sensors. You would need to configure RTL_433 to hop between the 915 MHz and 433 MHz to receive the two additional sensors.

[weewx-user] Re: modification index.html.tmpl in

Hi, I think you should remove one of the two #endif just before -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For

[weewx-user] weewx, SDR rtl_433 and USB, can you use data from both ? SDR station type with USB.

Hi I have weewx working with on 433 mhz temp sensor with the station type set to SDR. Can you have the SDR get data from 915 mhz, and from 433 mhz. Has anyone done that? Can you add a USB weather station too or can you only use one station type? I want to have the freedom to have a traditional

[weewx-user] modification index.html.tmpl in

hello, I recently installed Belchertown 0.9; Goog Job and Skin. I modified index.html.tmpl of Records to add a value " soiltemp1 " but I have an error, I don't understand. see syslog: Mar 3 19:25:38 raspberrypi weewx[8126]: copygenerator: copied 0 files to /var/www/html/weewx/belchertown Mar

Re: [weewx-user] Re: Second crash after 11 days

Hello; as of today, Weewx has been running for 96 hours and Top shows memory to be 9.9% which is a big improvement. I don't know if you want to do any more tweaking, Tom. If not, I can always set a cron to stop and restart Weewx once a month. This would be a restart when Mem = 54% I would

Re: [weewx-user] Belchertown skin 0.9 now available

Right now I am not using MQTT websockets. Maybe in the future. Right now I am only reading the web page from my meteopi server. Sent from my iPad > On 3 Mar 2019, at 19:29, Pat wrote: > > If you have websockets enabled, you can point your website to your mqtt > websockets server and get

Re: [weewx-user] Belchertown skin 0.9 now available

If you have websockets enabled, you can point your website to your mqtt websockets server and get live updates on everything on the front page. No need to reload. Just set the timeout parameter as mentioned above so it doesn't stop updating the page. On Sunday, March 3, 2019 at 12:27:39 PM

Re: [weewx-user] Belchertown skin 0.9 now available

Pat, I am using MQTT to sent data from the WMR300 weather station to other applications, mainly running NodeRed. Sent from my iPad > On 3 Mar 2019, at 19:20, Pat wrote: > > Paul, are you using MQTT for live updates? > > If so, set the disconnect_live_website_visitor option to something

Re: [weewx-user] Re: Weewx does not start on rasbian

On Sunday, March 3, 2019 at 12:08:25 AM UTC-8, gizm0 wrote: > > I checked with command vcgencmd_get_throttled if raspi has been under > voltage or is under voltage it says everything is ok > I wouldn't believe that as an indicator one way or the other. Here's a test for you to run: - unplug

Re: [weewx-user] Belchertown skin 0.9 now available

Hi, Pat Very nice job with the Belchertown skin. It is possible to add in the next versions   a refresh clause in the header.html.tmpl ? I am using a android tablet as a meteo panel using chrome and to have always updated info i am adding after each update this line in the header.html.tmpl:

[weewx-user] Re: Lake and pool water temperature weather station?

I am looking at the weewx hardware guide page and most interfaces are listed as USB, is that how must consoles are connected to raspberry pi for weewx? The 1900 does not have access or usb , as I was going to use sdr to get the signal as suggested in the posts first answer from mwall. the

Re: [weewx-user] Re: Weewx crash catcher

Crashing has a different message now. Before a week ago, I was still running 3.8.1, and was still catching crashes with my script. I don't know if I can go back that far, but I think this is closer to my problem why I wrote the script. -Mark Mar 3 04:44:37 server weewx[7844]: wmr200:

[weewx-user] Re: Lake and pool water temperature weather station?

Typo on my part...915 MHz for the WS-1900. Both other sensors are 433 MHz . Does the WS-1900 console have USB Port or are you referring about the USB hub? As for suggesting another WS, it depends on your budget. I have a Davis Vantage Pro 2 and Acurite 5 +1 sensor with various consoles. On

Re: [weewx-user] Davis Vantage Pro2 no data

Your logger is responding with an unknown hardware type. I doubt this has anything to do with the upgrade. Try power cycling: unplug the power supply from your Vantage and take out its batteries. While you are at it, reseat the logger. Then put everything back together and try again. -tk On

[weewx-user] Re: Lake and pool water temperature weather station?

Did you mean 915 MHz for the WS-1900, that is what I see, but eben if it is that is not 933 MHz right? Can weewx do both USB and rtl_433? Would you suggest another weather station, sensor combo to add pool temperature? This station has pool temperature: http://www.agualindapool.com/weewx/

[weewx-user] Davis Vantage Pro2 no data

Hi, after an update to the lastet version of weewx it does not get any data from my station anymore. With —info I get Using configuration file /etc/weewx/weewx.conf Using Vantage driver version 3.1.1 (weewx.drivers.vantage) Unable to wake up console... sleeping Unable to wake up console...

Re: [weewx-user] Dropping bad readings?

See [[[Essentials]]] under the [[Wunderground]] section in weewx.conf. -tk On Sun, Mar 3, 2019 at 5:38 AM Tony Cellini wrote: > Is there any setting in the config file that will allow me to have weewx > drop bad data packets? I have two

Re: [weewx-user] Re: NOAA Reports from imported Data

Could you do a full select on archive_day_outTemp? select * from archive_day_outTemp; It looks like there is some data in there. -tk On Sun, Mar 3, 2019 at 5:33 AM Michael wrote: > Hello, Thomas, > > my imported data has different origins. The first year only inTemp un > OutTemp, 2 values

[weewx-user] Dropping bad readings?

Is there any setting in the config file that will allow me to have weewx drop bad data packets? I have two different installs of weewx running, on on RPI and one on a standard Ubuntu server. Both of them will occasionally show complete drop-outs in data in the graphs on Weather Underground.

[weewx-user] Re: NOAA Reports from imported Data

Hello, Thomas, my imported data has different origins. The first year only inTemp un OutTemp, 2 values per day (min and max). Then until 2017 the values recorded by the software of my station and from 06/2018 the values of WeeWX. Here is a small example from weewx.archiv MariaDB [weewx]> SELECT

Re: [weewx-user] Belchertown skin 0.9 now available

Perfect - thanks, works as expected. Gav On Sun, Mar 3, 2019 at 12:30 PM Pat wrote: > I made those changes to the graphs page too. Available on GitHub if you > want to download it. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To

Re: [weewx-user] Belchertown skin 0.9 now available

I made those changes to the graphs page too. Available on GitHub if you want to download it. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [weewx-user] Belchertown skin 0.9 now available

Thanks Pat, That does it - see results here www.wiggytoo.co.uk, I guess you need to make the same sort of change in graphs\index.html.tmpl Gav On Sat, Mar 2, 2019 at 7:23 PM Pat wrote: > Gav, I just pushed a change which I think will fix this >

[weewx-user] Re: Add additional rain gauge via second data source

Hello, I tried to implement a driver providing the rainfall in intervall but until now it does not work as expected. I'am able to handle the correct data to WeeWx with this command: syslog.syslog(syslog.LOG_DEBUG, "WeatherDuino: " + str(names[n+1]) + ": " +

Re: [weewx-user] Re: Weewx does not start on rasbian

Just remember that you were getting voltage issues at one time. Those voltage issues could have damaged the rpi in some way or the sd card in some way. Putting a new supply in pace has stopped the low voltage issues - but will not have repaired any previous damage to rpi or sd card. I would

[weewx-user] Adding Average Humidty/DewPoint to NOAA reports

Hi, I would like to add Average Humidity/Dew Point to NOAA reports like how Ogimet has in their summaries. Any pointers on how to go about doing it? Regards, Praveen -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this

Re: [weewx-user] Belchertown skin 0.9 now available

Ok, please ignore, I think there was a caching issue. Br, Johannes Am Sonntag, 3. März 2019 08:44:53 UTC+1 schrieb Johannes Ebner: > > Hi, > > Could you doublecheck? I have downloaded the latest release from github, > but now I hade to change from "mqtt_websockets_" back to "mqtt_". > > Br, >

Re: [weewx-user] Re: Weewx does not start on rasbian

I checked with command vcgencmd_get_throttled if raspi has been under voltage or is under voltage it says everything is ok. Also I checked from dmesg, if there were any write errors or similar and there was no errors at all. # /opt/vc/bin/vcgencmd get_throttled throttled=0x0 I guess I have to