[weewx-user] Re: Problem Wunderground and Graph Wind Gust

Thanks Thomas for answer. I try your solution and don't work, the graph show bad again. Only when I disable RapidaFire the graph look fine. Others stations with 15-30 seconds refresh work fine the graph, I don't know if them have RapidFire enable, show other software not weewx. El martes, 16

[weewx-user] Receiving Davis Vantage weather data with a RTL-SDR dongle Update

Just an update on receiving Davis Vantage weather data with a RTL-SDR dongle. Currently using WeeWX version 3.9.1 and receiving/displaying all data, including additional UV sensor, from the ISS. Additionally, receiving data from the BME280 I2C sensor for pressure readings. Drivers I'm

Re: [weewx-user] Wunderground issues

FWIW, I think WU is overloaded. I manually run wunderfixer a couple of times a day here and there. It routinely complains that WU is unavailable. I'll try it up to 10 times before it finally "gets through." Regards, \Leon -- Leon Shaner :: Dearborn, Michigan (iPad Pro) Regards, Leon -- Leon

[weewx-user] Wunderground issues

Okay, so I have just recently re set up weewx on a new raspberry PI. So I am making changes to the weewx.conf. for pushing data to PWS and Wunderground. I keep getting the following message for wunderground and I am sure I am missing a setting but I cannot remember where. I have for the

Re: [weewx-user] Pull data at specific time or maxtime or mintime of another data value

No, you're covered - it's an undocumented feature! Gary On Wednesday, 17 April 2019 11:10:05 UTC+10, Thomas Keffer wrote: > > Oops. Tripped up on what is probably the most asked support question! > > On Tue, Apr 16, 2019 at 3:54 PM gjr80 > > wrote: > >> Was just about to post that, though Tom I

Re: [weewx-user] Pull data at specific time or maxtime or mintime of another data value

Oops. Tripped up on what is probably the most asked support question! On Tue, Apr 16, 2019 at 3:54 PM gjr80 wrote: > Was just about to post that, though Tom I suspect you might need to use: > > #set $t=$day.outHumidity.maxtime.raw > > Gary > > On Wednesday, 17 April 2019 08:18:05 UTC+10, Thomas

[weewx-user] Re: Not getting data to web page, CWOP or PWSWeather

OK, hopefully 3rd time is a charm :-) Got 5 minutes worth of data On Tuesday, April 16, 2019 at 6:33:24 PM UTC-4, Jim Snider wrote: > > I got my system to connect to everything but solar no data is being > transmitted to CWOP or PWSWeather. Here's what they said that they are > seeing on

[weewx-user] Re: Not getting data to web page, CWOP or PWSWeather

OK, better but still not quite there yet :) Easier to read but .txt would be better. Main issue though is that log extract shows us 37 seconds of activity which is predominantly just chatter from the interceptor driver. Have a look at the example log extract I posted, you will notice the

[weewx-user] Re: Not getting data to web page, CWOP or PWSWeather

OK, let try this agin with this file. On Tuesday, April 16, 2019 at 6:33:24 PM UTC-4, Jim Snider wrote: > > I got my system to connect to everything but solar no data is being > transmitted to CWOP or PWSWeather. Here's what they said that they are > seeing on their ends. > > > *Joe

[weewx-user] Re: Not getting data to web page, CWOP or PWSWeather

Thanks but that is not quite what we are after, its very hard to make sense of and does not contain what we need to see. Really need to see something like this (but perhaps a bit longer): Mar 7 13:47:09 stretch7 weewx[16079]: engine: Initializing weewx version 3.8.0 Mar 7 13:47:09 stretch7

Re: [weewx-user] Pull data at specific time or maxtime or mintime of another data value

It worked with .raw Thanks, Patrick On Tue, Apr 16, 2019 at 3:55 PM gjr80 wrote: > Was just about to post that, though Tom I suspect you might need to use: > > #set $t=$day.outHumidity.maxtime.raw > > Gary > > On Wednesday, 17 April 2019 08:18:05 UTC+10, Thomas Keffer wrote: >> >> Hang on. I

[weewx-user] Re: Not getting data to web page, CWOP or PWSWeather

On Wednesday, 17 April 2019 08:33:24 UTC+10, Jim Snider wrote: > > Any ideas?? > Yes, edit weewx.conf, set debug = 2, save weewx.conf then restart WeeWX. Let WeeWX run for at least 2 archive intervals and then take a copy of the log from when WeeWX was restarted until the 2 archive intervals

Re: [weewx-user] Pull data at specific time or maxtime or mintime of another data value

Was just about to post that, though Tom I suspect you might need to use: #set $t=$day.outHumidity.maxtime.raw Gary On Wednesday, 17 April 2019 08:18:05 UTC+10, Thomas Keffer wrote: > > Hang on. I take that back. Try this: > > #set t=$day.outHumidity.maxtime > The temperature at max humidity was

[weewx-user] Not getting data to web page, CWOP or PWSWeather

I got my system to connect to everything but solar no data is being transmitted to CWOP or PWSWeather. Here's what they said that they are seeing on their ends. *Joe Torsitano* (AerisWeather Support) Apr 16, 11:57 AM CDT Our system is showing your software is connecting. However, it isn't

Re: [weewx-user] Pull data at specific time or maxtime or mintime of another data value

Hang on. I take that back. Try this: #set t=$day.outHumidity.maxtime The temperature at max humidity was $current($timestamp=$t).outTemp -tk On Tue, Apr 16, 2019 at 3:15 PM Thomas Keffer wrote: > That would require writing a search list extension >

Re: [weewx-user] Pull data at specific time or maxtime or mintime of another data value

That would require writing a search list extension that executed a specialized SQL statement. On Tue, Apr 16, 2019 at 1:55 PM Patrick Mendiuk wrote: > Hello, > I would like to add some values to some reports that are from a specific >

[weewx-user] Re: Not getting data to PWSWeather

On Friday, April 12, 2019 at 5:07:04 PM UTC-4, Jim Snider wrote: > > I recently sent up whew and intercepter on my Pi to send my Acurite Smart > Hub data to WUnderground. I set up an account for PWS Weather but I'm not > getting any data to them. I've looked at their help files and have been

Re: [weewx-user] Problem Wunderground and Graph Wind Gust

I have seen this before for stations that use Rapidfire. It's definitely a WU bug. The option rtfreq will not make any difference. It's an optimization for the Rapid fire Flash display . One thing you can try is to add the option

[weewx-user] Pull data at specific time or maxtime or mintime of another data value

Hello, I would like to add some values to some reports that are from a specific time or the same time as minimum or maximum value of another data field. I would like to do something like this: $outTemp at $day.outHumidity.maxtime Thanks, Patrick -- You received this message because you are

[weewx-user] Problem Wunderground and Graph Wind Gust

Hello I´m newbie, sorry for inconveniences! I have a problem with Wunderground graph "wind speed" and "wind gust", generally the same values ​​appear and it is not true (into my Web the graph its ok) I don't know if problem is mine or the wunderground web (here

Re: [weewx-user] Re: weewx stop working

I have manualls started interceptor, what can I expect from it, because nothing changes? PYTHONPATH=/usr/share/weewx python /usr/share/weewx/user/interceptor.py --device=observer --mode=listen --port= Dne torek, 16. april 2019 11.16.05 UTC+2 je oseba gjr80 napisala: > > There have been no

[weewx-user] Re: Forecast XTide error

Thanks Matt for all of your donated labors for the weewx community; it is very much appreciated! When you've time, one other forecast request; i.e. [Forecast] [[*needed_fixes*]] - WU new API keys and commands - already mentioned - *NWS new Point-n-Click product* The old

Re: [weewx-user] Re: weewx stop working

Thank you I did this and no luck. Can you tell me are there any changes in databasebetween version 3.8.1 and the latest version?? If not I will install new weewx with rpm and than use old database. regards Dne petek, 12. april 2019 15.34.53 UTC+2 je oseba Leon Shaner napisala: > > Damian, > >