GPU is 64MB
No X running. Only weewx and hostapd running
# free -m
totalusedfree shared buff/cache
available
Mem:937 160 504 33 272
693
Swap: 1875 01875
On Monday, Septem
looking at the error again - could it be out of memory rather than file
space?? As you are on a Pi have you tried adjusting graphics memory v cpu
memory sizes? What size memory RPi are you using?? My Rpi3 gives
MemTotal 927 Used 269 Free 177 Shared 54 Buff/cache 480 available 540
swap tot
Hi Thomas,
I have the same problem as Patrick. Though I had no luck with the new
driver version you suggested him to try with. I get:
Sep 24 07:13:57 ripslinger weewx[17315]: engine: Starting up weewx version
3.9.2
Sep 24 07:13:59 ripslinger weewx[17315]: wmr200: MainThread: I genStartup()
De
Not that either...
# free -m
totalusedfree shared buff/cache
available
Mem:874 512 95 54 266
253
Swap: 1749 1061642
--
You received this message because you are subscribed to th
size of swapfile - or even lack of a swap file perhaps??
On Tuesday, 24 September 2019 06:35:11 UTC+3, Scott Grayban wrote:
>
> Well it's not INODES
>
> # /bin/df -i
> Filesystem Inodes IUsed IFree IUse% Mounted on
> /dev/root 1925760 277090 1648670 15% /
> devtmpfs110788
size of swapfile perhaps??
On Tuesday, 24 September 2019 06:35:11 UTC+3, Scott Grayban wrote:
>
> Well it's not INODES
>
> # /bin/df -i
> Filesystem Inodes IUsed IFree IUse% Mounted on
> /dev/root 1925760 277090 1648670 15% /
> devtmpfs110788412 1103761% /dev
> tm
Well it's not INODES
# /bin/df -i
Filesystem Inodes IUsed IFree IUse% Mounted on
/dev/root 1925760 277090 1648670 15% /
devtmpfs110788412 1103761% /dev
tmpfs 111940 1 1119391% /dev/shm
tmpfs 111940580 1113601% /run
tmpfs
Things other than a lack of file space can cause this error. Take a look
at this StackOverflow thread:
https://stackoverflow.com/questions/6998083/python-causing-ioerror-errno-28-no-space-left-on-device-results-32766-h
-tk
On Mon, Sep 23, 2019 at 8:09 PM Scott Grayban wrote:
> Getting this err
Getting this error and can't trace why it's happening as there is plenty of
space on the SD card.
cheetahgenerator: Generate failed with exception ''
cheetahgenerator: Ignoring template
/etc/weewx/skins/Highcharts_Belchertown/json/year.json.tmpl
cheetahgenerator: Reason: [Errno 28] No
Yep it seems to be working fine. Tried it with a dryrun and no more errors.
Thanks again for the help.
I'm glad I have discovered weewx. Currently toying with the Cheetah
generator to reproduce some files I need.
On Sunday, September 22, 2019 at 6:09:54 PM UTC-4, Hyrules Hyrules wrote:
>
> Hi
Hi,
Reports are processed in the order listed in weewx.conf under [StdReport],
have a look under [StdReport], is [[RSYNC]] before or after
[[SeasonsReport]]? Based on the log extract provided I am guessing it is
before. If so try moving then entire [[RSYNC]] stanza to be after (the
entire) [[S
OK, since you are more than capable of making the change I would just make
the change I detailed and do the import. The fix has ben included in some
other changes to that portion of wee_import but these will not appear until
4.0 is released.
Gary
On Monday, 23 September 2019 21:07:43 UTC+10, H
jmltech writes:
> Has anyone tried using sensorpush or other wifi type temperature sensors for
> remote monitoring with Weewx?
> I’m looking to monitor temperature and humidity for a remote building
> and RV. I believe sensorpush has an api, but haven’t looked into how
> to retrieve the data. Th
Sorry, but the value of rxCheckPercent comes only from the console, and
then only in archive records (not LOOP packets). If you disable hardware
record generation, you lose it.
It would be a nice feature to be able to pick and chose where each datum in
the archive record comes from, but, unfortuna
Is there error from a Spanish character in the template, or in skin.conf,
or weewx.conf?
Which template?
Please include the log.
-tk
On Mon, Sep 23, 2019 at 10:46 AM Kike .Asekas wrote:
> I get this error when I try using spanish characters (ñ,á,é,í,ó,ú). I have
> #encoding UTF-8 in each page
Funny, but typo only on posting. It is correct at config files.
On September 23, 2019 at 2:54 PM, vince (vinceska...@gmail.com) wrote:
Belchertown skin.conf:
[[Lables]]
lux = " lux"
You have 'Labels' spelled wrong :-)
--
You received this message because you are subscribed to a topic in t
>
> Belchertown skin.conf:
>
> [[Lables]]
> lux = " lux"
>
>
>
You have 'Labels' spelled wrong :-)
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an ema
I am trying to connect an original Dallas Semiconductor Weather station and
run WEEWX to a Raspberry Pi, I have both the I2C and the Serial Port to a
serial to 1-wire adapter available for the build process.
Does anyone recommend one over the other? and if I use the I2C to one-wire
adapter, wha
Recently updated to WeatherFlow (and happy with it), which provides:
- Temperature
- Humidity
- Barometric Pressure
- Wind speed/direction
- Rainfall
- UV
- Solar Radiation
- Luminance *
- Lightning count/distance *
Was able to report Luminance through Belchertown Skin
I get this error when I try using spanish characters (ñ,á,é,í,ó,ú). I have
#encoding UTF-8 in each page althougnt I get the error in a page only and i
have encoding = utf8 in [CheetahGenerator] in skin.conf.
--
You received this message because you are subscribed to the Google Groups
"weewx-us
I recently installed weewx on a Pi to use with my ancient Davis Vantage
Pro. In order to get the winds to report actual degrees instead of
quantized to the cardinals, I had to set "record_generation = software" in
the weewx.conf file. However, after I did that, the data point for signal
qual
Has anyone tried using sensorpush or other wifi type temperature sensors for
remote monitoring with Weewx?
I’m looking to monitor temperature and humidity for a remote building and RV. I
believe sensorpush has an api, but haven’t looked into how to retrieve the
data. The outbuilding is a little
I had to make quite complex meal in the meantime, so, now I can post the
solution.
If someone wants to have name of the wind shown instead or in addition to
Cardinal and numeric, here it is. This example will serve people at
Croatian coast of Adriatic see without modification. It is easy to mod
I got the new sensor installed. Its been over 12 hours and so far no errors
in weewx and the humidity is showing a very reasonable value for the whole
12 hours.
It fluctuates a small amount as expected but holds very near our areas
humidity according to Accuweather. I'll keep watching it but i
Thanks. I don't think I have access to the web server config to go at it
from that angle, but since I'm post-processing
all the web pages anyway to change host names, I can add the actual
timestamps from the files while I'm at it.
Any other ideas on the report sequence? I can fiddle with that
Works! Just need tweaking to look good! Thanks. My code was decently close
:)
As for the second issue, yes, I would like to overlay names over
corresponding points of the graphs if possible.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To un
The disadvantage of HTML entities (such as š) is that they can only
be used in, well..., HTML. That means the templates.
The advantage is that they consist of nothing but ASCII characters, so they
are always displayed the same way.
By contrast, the advantage of UTF-8 characters is that they are e
OK, I see, not HTML chars but the plain ones are needed for graphs.
And as for the Cardinal points - I was afraid that may be the answer seeing
the strucutre of data usage.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this
1. You can do something like this in the templates (NOT TESTED):
#if $current.windDir.raw >= 22.5 and $current.windDir.raw <= 67.5
#set label = "Bura"
#elif $current.windDir.raw > 67.5 and $current.windDir.raw <= 112.5
#set label = "Levanat"
#elif $current.windDir.raw > 112.5 and $current.wi
>
> How to get unicode letters in graph title: Kiša should look like
> this: Kiša
>
Just use UTF-8 encoding for the label title in the appropriate
configuration file. For example, for the Seasons skin, in file
Seasons/skin.conf, change this
[[[dayrain]]]
# Make sure the y-axis increment is at
I would like to use the WeeWx Smartphone skin as my SmartHome page, too. No
automation, just manual switches. Whoever is using Tasmota firmware may
actually get their SmartHome this way both quicker and simpler. I plan to
avoid additional home automation programs and OS-es. What I need, I will
I would like to use and display our local wind names. I understand this may
be impossible, but it is not my fault WeeWX impresses me so much that I
expect it to do anything I wish :) Not my fault!
We have 8 distinct winds governing not only weather but also the mood of
most people. Just ask the
How to get unicode letters in graph title: Kiša should look like
this: Kiša
Wind directions in graphs: how to change scale of graphs from deg to
letters to display Cardinal points instead of numbers?
I am reading docs, and have modified many items, but these I can not get on
my own for now.
-
Hi Gary,
Thanks for the quick reply. I'm not in a hurry. If you want to work on the
cumulus import script of weewx i'll be around waiting if you want to test
it with someone. I really want to import my cumulus file. It's possible
there are gaps in the files it's not really a problem for me as it i
34 matches
Mail list logo