[weewx-user] Re: Using MQTT Subscribe

I created a pre-release with the fix. It is here, https://github.com/bellrichm/WeeWX-MQTTSubscribe/releases/tag/v1.6.2-rc03 Hopefully this is it. rich On Saturday, 10 October 2020 at 10:15:29 UTC-4 timothye...@gmail.com wrote: > OK, thanks for your help. > > On Saturday, October 10, 2020 at

Re: [weewx-user] Clean install - restore data from old version

If you want to do this, see the Wiki article *Switching to the new wview_extended schema * On Sat, Oct 10, 2020 at 2:47 PM weather list wrote: > It works fine to just put the old .sdb file in the archive folder. If

Re: [weewx-user] Clean install - restore data from old version

It works fine to just put the old .sdb file in the archive folder. If you night eventually want to make use of the new schema however, you might want to let the fresh install create a new .sdb and then import the data from the old one. > On 10 Oct, 2020, at 11:00, karlg...@gmail.com wrote: >

Re: [weewx-user] Davis Forecast Icons

Thanks Tom On Saturday, October 10, 2020 at 8:02:38 AM UTC-4 tke...@gmail.com wrote: > See page 23 of the Davis Communications Reference Manual > > . > > On Fri, Oct 9, 2020 at 7:44 PM rich T wrote:

Re: [weewx-user] Clean install - restore data from old version

Oops. Yes, you are right. That Upgrade Guide was intended for V4.2, but accidentally got uploaded. I've replaced it with the V4.1 guide. -tk On Sat, Oct 10, 2020 at 11:29 AM karlg...@gmail.com wrote: > My clean install will be a new installation, but I'll try a straight > forward replace and

Re: [weewx-user] Clean install - restore data from old version

My clean install will be a new installation, but I'll try a straight forward replace and see what happens. Thanks for the reply PS: I thought 4.1 was the latest but then I saw "Upgrading from 4.1 ..." in the upgrade guide so I assumed 4.2 was out :-) On Saturday, 10 October 2020 at 16:09:10

Re: [weewx-user] Missing wind directi onand degrees with Weatherflow UDP & Belchertown Skin 1.2

Thanks Vince. I missed the obvious and made it harder that should be. > On Oct 10, 2020, at 12:43 PM, vince wrote: > > On Saturday, October 10, 2020 at 7:55:13 AM UTC-7, Michael McClane wrote: > I've ran debug on the Belchertown Skin and it shows dashes in the web > console. Also ran debug

[weewx-user] Re: Missing wind directi onand degrees with Weatherflow UDP & Belchertown Skin 1.2

On Saturday, October 10, 2020 at 7:55:13 AM UTC-7, Michael McClane wrote: > > I've ran debug on the Belchertown Skin and it shows dashes in the web > console. Also ran debug on weewx.conf. It seems everything runs as > expected. Everything appears to fine with the exception of wind direction

Re: [weewx-user] WMR200-driver reports UV-sensor value as 255 when h'FF = no sensor installed

Per, Try this version of the driver: https://raw.githubusercontent.com/weewx/weewx/master/bin/weewx/drivers/wmr200.py -tk On Sat, Sep 26, 2020 at 11:53 PM Per Edström wrote: > The wmr200.py should not report h'ff as a value out of range as there is > no value from the UV-sensor as there is no

Re: [weewx-user] Clean install - restore data from old version

The schema has not changed since weewx adopted it from wview, over 10 years ago. There is a new "extended" schema available, but it is relevant only with new installations. The database file has not changed since v3.0, released in late 2014. Earlier databases are automatically upgraded. V4.2 is

[weewx-user] Clean install - restore data from old version

Hi, I've been using and tinkering with Weewx since 2014; and a couple of little errors have accumulated so I'm taking the move to python 3 as an excuse to start afresh. I can't see if the schema has changed between 3.8 and 4.2, so could I do a clean install and replace the newly created

[weewx-user] Missing wind directi onand degrees with Weatherflow UDP & Belchertown Skin 1.2

I've ran debug on the Belchertown Skin and it shows dashes in the web console. Also ran debug on weewx.conf. It seems everything runs as expected. Everything appears to fine with the exception of wind direction and degrees. Here is my weewx.conf [WeatherFlowUDP] 85 86 # This section is

[weewx-user] Re: Using MQTT Subscribe

OK, thanks for your help. On Saturday, October 10, 2020 at 7:22:18 AM UTC-6 bell...@gmail.com wrote: > Thanks for the log. Looks like there is a bug with the ignore_start_time > option. Fix looks easy, I just need to make sure there are no side effects. > I’ll let you know when the fix is

[weewx-user] Re: Using MQTT Subscribe

Thanks for the log. Looks like there is a bug with the ignore_start_time option. Fix looks easy, I just need to make sure there are no side effects. I’ll let you know when the fix is available. - rich On Friday, 9 October 2020 at 22:55:11 UTC-4 timothye...@gmail.com wrote: > I added those

Re: [weewx-user] Davis Forecast Icons

See page 23 of the Davis Communications Reference Manual . On Fri, Oct 9, 2020 at 7:44 PM rich T wrote: > Just wondering if anyone has a cross reference developed for the > forecastIcon integer to the

[weewx-user] Re: Error parsing wu-client data

Last try, anyone able to help!? Thanks a lot. Stefan Guddat schrieb am Freitag, 25. September 2020 um 14:50:10 UTC+2: > Anyone with python knowledge able to help? Thanks > > Stefan Guddat schrieb am Dienstag, 22. September 2020 um 23:42:16 UTC+2: > >> The last step to have my setup running is