Re: [weewx-user] Re: Weatther Station stops same time every week

[dunbrokin]

OK, lets see if I can get it right this time!
 mylog
<https://drive.google.com/file/d/11Ho3ZSODZgTH-WZ39Ak_JBqNh9YaTSMZ/view?usp=drive_web>

On Tue, Aug 27, 2024 at 2:15 PM vince  wrote:

> Set debug=1 and maybe we can figure it out
>
> On Monday, August 26, 2024 at 1:02:43 PM UTC-7 dunbrokin wrote:
>
>> Oops Sorry, I thought I had hardwired in debug=1.bottom of the class
>> for me on this one I thinkmade all the rookie mistakes. Apologies for
>> wasting your time!
>>
>>
>> On Tue, Aug 27, 2024 at 4:20 AM vince  wrote:
>>
>>> Sigh - as always, set debug=1 and let it run for more like 35 minutes.
>>> You have an archive period of 10 minutes if it's running off the hardware
>>> interval of 600 seconds so we need to see a few cycles.
>>>
>>> On Monday, August 26, 2024 at 1:38:03 AM UTC-7 dunbrokin wrote:
>>>
>>>> Apologies, yes it's always a good idea.
>>>>
>>>>  For the last 3 weeks on Sat night at 11.50 it stopped
>>>> recording.but rebooting started it again the next day. However this
>>>> week after rebooting it stopped at 11.10 am and despite rebooting, it never
>>>> started recording again.
>>>>
>>>> So I ran the log as per the instructionsbut it only ran for about 6
>>>> minutes. Attached is all that was recorded in almost 15 minutes.
>>>>
>>>>
>>>> On Sun, Aug 25, 2024 at 1:33 PM vince  wrote:
>>>>
>>>>> Your system logs.
>>>>>
>>>>> On Saturday, August 24, 2024 at 4:16:58 PM UTC-7 Monica Mulholland
>>>>> wrote:
>>>>>
>>>>>> Every week, on Saturday night at 11.50 pm my station stops reporting
>>>>>> and needs to be rebooted. I am on a RPi4 (recently upgraded). Other than
>>>>>> this little glitch, which is annoying, it is running very well since I
>>>>>> upgraded to the RPi4.
>>>>>>
>>>>>> Any suggestions of where I might look to try and sort this issue?
>>>>>>
>>>>>> Any help greatly appreciated.
>>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "weewx-user" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to weewx-user+...@googlegroups.com.
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/weewx-user/68cf6bec-901e-449d-b75a-45b3fc7c75b5n%40googlegroups.com
>>>>> <https://groups.google.com/d/msgid/weewx-user/68cf6bec-901e-449d-b75a-45b3fc7c75b5n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>> .
>>>>>
>>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to weewx-user+...@googlegroups.com.
>>>
>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/79829310-aa83-4281-9244-7cc9adbc0037n%40googlegroups.com
>>> <https://groups.google.com/d/msgid/weewx-user/79829310-aa83-4281-9244-7cc9adbc0037n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/ef35ee91-7527-4e17-93a4-f3f7d5bf91c8n%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/ef35ee91-7527-4e17-93a4-f3f7d5bf91c8n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAF1oafeGCyEVdqpuLa9zKZ%2BCAn4w79%2BarSRUorzvStXTN0b0dA%40mail.gmail.com.

Re: [weewx-user] Re: Weatther Station stops same time every week

[dunbrokin]

Oops Sorry, I thought I had hardwired in debug=1.bottom of the class
for me on this one I thinkmade all the rookie mistakes. Apologies for
wasting your time!


On Tue, Aug 27, 2024 at 4:20 AM vince  wrote:

> Sigh - as always, set debug=1 and let it run for more like 35 minutes.
> You have an archive period of 10 minutes if it's running off the hardware
> interval of 600 seconds so we need to see a few cycles.
>
> On Monday, August 26, 2024 at 1:38:03 AM UTC-7 dunbrokin wrote:
>
>> Apologies, yes it's always a good idea.
>>
>>  For the last 3 weeks on Sat night at 11.50 it stopped recording.but
>> rebooting started it again the next day. However this week after rebooting
>> it stopped at 11.10 am and despite rebooting, it never started recording
>> again.
>>
>> So I ran the log as per the instructionsbut it only ran for about 6
>> minutes. Attached is all that was recorded in almost 15 minutes.
>>
>>
>> On Sun, Aug 25, 2024 at 1:33 PM vince  wrote:
>>
>>> Your system logs.
>>>
>>> On Saturday, August 24, 2024 at 4:16:58 PM UTC-7 Monica Mulholland wrote:
>>>
>>>> Every week, on Saturday night at 11.50 pm my station stops reporting
>>>> and needs to be rebooted. I am on a RPi4 (recently upgraded). Other than
>>>> this little glitch, which is annoying, it is running very well since I
>>>> upgraded to the RPi4.
>>>>
>>>> Any suggestions of where I might look to try and sort this issue?
>>>>
>>>> Any help greatly appreciated.
>>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to weewx-user+...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/68cf6bec-901e-449d-b75a-45b3fc7c75b5n%40googlegroups.com
>>> <https://groups.google.com/d/msgid/weewx-user/68cf6bec-901e-449d-b75a-45b3fc7c75b5n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/79829310-aa83-4281-9244-7cc9adbc0037n%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/79829310-aa83-4281-9244-7cc9adbc0037n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAF1oafcoJw%3Dm6dhBAFTk8-qNuKj-BzovYvb6fys6%3DWfFzGjgfQ%40mail.gmail.com.

Re: [weewx-user] Re: Weatther Station stops same time every week

[dunbrokin]

Apologies, yes it's always a good idea.

 For the last 3 weeks on Sat night at 11.50 it stopped recording.but
rebooting started it again the next day. However this week after rebooting
it stopped at 11.10 am and despite rebooting, it never started recording
again.

So I ran the log as per the instructionsbut it only ran for about 6
minutes. Attached is all that was recorded in almost 15 minutes.


On Sun, Aug 25, 2024 at 1:33 PM vince  wrote:

> Your system logs.
>
> On Saturday, August 24, 2024 at 4:16:58 PM UTC-7 Monica Mulholland wrote:
>
>> Every week, on Saturday night at 11.50 pm my station stops reporting and
>> needs to be rebooted. I am on a RPi4 (recently upgraded). Other than this
>> little glitch, which is annoying, it is running very well since I upgraded
>> to the RPi4.
>>
>> Any suggestions of where I might look to try and sort this issue?
>>
>> Any help greatly appreciated.
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/68cf6bec-901e-449d-b75a-45b3fc7c75b5n%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAF1oaff3aKuW977tMK8Gh40nhjtL%3DJPLFAg7tPD-JGzXR9nGCQ%40mail.gmail.com.


mylog(2)
Description: Binary data

Re: [weewx-user] Re: Remove Inide Temp graph

[dunbrokin]

Thank you for that, much appreciated...I would not have thought of looking
there!

On Mon, Jul 22, 2024 at 12:06 PM gjr80  wrote:

> Did you look in the Standard skin skin.conf under [ImageGenerator]
> [[day_images]]:
>
> [[day_images]]
> 
>
> [[[dayinside]]]
> inTemp
>
> Comment out the [[[dayinside]]] and inTemp lines. Likewise in
> [[week_images]], [[month_images]] and [[year_images]].
>
> Gary
> On Monday 22 July 2024 at 09:35:50 UTC+10 dunb...@gmail.com wrote:
>
>> I would appreciate some help to eliminate this graph in my Standard 
>> Skin[image:
>> Screenshot from 2024-07-22 11-29-16.png]
>>
>> I have searched index.html.tmpl and skin.conf and weewx.conf and cannot
>> seem to find where the Inside Temperature graph sits. I have eliminated all
>> references to inside temperature so that it is not recorded...but cannot
>> seem to find the graph reference so that I can eliminate that also.
>>
>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/f16147a9-2ffe-4e44-b53f-f288952eb70fn%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAF1oafd3JbOFcjAVGMwH1Em57%2BMP%2Bwu3wUbUUQppvqgPNT8csg%40mail.gmail.com.

Re: [weewx-user] Re: After weewx.conf change there are critical issues!!

[dunbrokin]

Sorry, just one more thing. In the skin I was using (for many years) until
all this happened, I was able to include a photograph every hour of the
weather. I have no idea how I did this as it was so long agocan
somebody throw me a crumb please so that I can start working on that. I
think I am using the standard skin. I am sure all of this will be in the
back up image that I have got...but I have no idea where to start looking.
As ever, thank you for your patience and support!

On Mon, Jul 15, 2024 at 4:20 PM Monica Mulholland 
wrote:

> Problem solved, the website host told me that the problem was that I was
> not logging in on Port 22 and that Port 22 was the one I should be using.
> So, I took them at their word and did that. This time, just out of
> ciussidness, I tried Port 21 and, mirabile dictu, it just worked!
>
> Thank you all for your help...your patience with me and your helpful
> suggestions are very much appreciated!
>
> On Monday 15 July 2024 at 16:16:00 UTC+12 Monica Mulholland wrote:
>
>> Hmm! I wonder if this could be the problem. You will see from Filezilla
>> that I logged in using the information in the weewx.confand when I did
>> I got this server certificate that I had to accept..maybe that is why
>> it timed outthere was no way for the .conf file to accept the
>> certificate
>>
>> On Monday 15 July 2024 at 14:08:44 UTC+12 Monica Mulholland wrote:
>>
>>> On the plus sideI notice
>>> thatfile:///var/www/html/weewx/index.html...works properly now.but
>>> without the photo insertwhich I have forgotten how to do or where to
>>> find it!
>>>
>>> On Monday 15 July 2024 at 14:00:40 UTC+12 Monica Mulholland wrote:
>>>
 Thank you both  for that, I will examine it againthough I have been
 over this ground  a number of times.I am but human and subject to
 mistakes!

 On Monday 15 July 2024 at 13:16:06 UTC+12 vince wrote:

> If it is the same address starting with 43.245.x.x from the first
> message in this thread, that address 'does' respond for me.  Suspect a 
> typo
> in weewx.conf possibly
>
> On Sunday, July 14, 2024 at 6:10:43 PM UTC-7 p q wrote:
>
>> FTP appears to be timing out when trying to connect. Can you connect
>> to the FTP server manually with the same credentials as you're using with
>> Weewx?
>>
>> On Sun, Jul 14, 2024 at 5:28 PM Monica Mulholland 
>> wrote:
>>
>>> I am half way through my project of transferring from the RPi3 to
>>> the RPi4, with some notable successes! I have got the 
>>> weather-underground
>>> site up and running...and showing on WU!
>>>
>>> However, I am having no luck with the HTML website. Not sure where
>>> the problem is. I have run the log (see attached) and hopefully somebody
>>> can give me pointers. I have tried the log in details for the website on
>>> Filezilla and it connected properly.
>>>
>>> On Monday 15 July 2024 at 01:39:23 UTC+12 Tom Keffer wrote:
>>>
 No, but my current passion is the Western Flyer Foundation
 . A contribution there is always
 welcome!

 On Sun, Jul 14, 2024 at 12:59 AM Monica Mulholland <
 dunb...@gmail.com> wrote:

> How do I make a contribution to show my appreciation for all the
> work you have done and this project over the yearsdo you have a 
> tip jar
> or something/
>
> On Friday 12 July 2024 at 09:18:59 UTC+12 Tom Keffer wrote:
>
>> Of course. Just copy the database file over. It's that simple.
>>
>> See the documentation *Where to find things
>> * for the
>> location of your database file.
>>
>> On Thu, Jul 11, 2024 at 2:12 PM Monica Mulholland <
>> dunb...@gmail.com> wrote:
>>
>>> Thank you for that suggestion, much appreciated. However, for
>>> comparison purposes I would like to have access to the old 
>>> records...they
>>> go back nearly 15 years! Is there anyway I can do both?
>>>
>>> On Friday 12 July 2024 at 09:01:52 UTC+12 vince wrote:
>>>
 If you don't care about saving old readings from your old
 database, please just follow the v5 documentation (link)
  and start
 anew.  Your blood pressure will thank you.

 All you'll need to do at some point is configure any optional
 uploaders such as the FTP one you've been battling.  Having your 
 old
 weewx.conf file someplace safe on another computer to use as a 
 reference
 will help.

 On Thursday, July 11, 2024 at 1:16:00 PM UTC-7 Monica
 Mulholla

Re: [weewx-user] WeeWX v5.1 is available

[dunbrokin]

Thank you for thatbut


pi@WeatherPi:~ $ sudo apt install -y wget gnupg
Reading package lists... Done
Building dependency tree
Reading state information... Done
gnupg is already the newest version (2.1.18-8~deb9u4).
wget is already the newest version (1.18-5+deb9u3).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
pi@WeatherPi:~ $ wget -qO - https://weewx.com/keys.html | \
> sudo gpg --dearmor --output /etc/apt/trusted.gpg.d/weewx.gpg
pi@WeatherPi:~ $ echo "deb [arch=all] https://weewx.com/apt/python3 buster
main" | \
> sudo tee /etc/apt/sources.list.d/weewx.list
deb [arch=all] https://weewx.com/apt/python3 buster main

pi@WeatherPi:~ $ sudo apt update
Hit:1 http://archive.raspberrypi.org/debian stretch InRelease
Ign:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease
Err:3 http://raspbian.raspberrypi.org/raspbian stretch Release

  404  Not Found [IP: 93.93.128.193 80]
Get:4 https://weewx.com/apt/python3 buster InRelease [4,251 B]
Get:5 https://weewx.com/apt/python3 buster/main all Packages [5,644 B]
Reading package lists... Done
E: The repository 'http://raspbian.raspberrypi.org/raspbian stretch
Release' does no longer have a Release file.
N: Updating from such a repository can't be done securely, and is therefore
disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration
details.

pi@WeatherPi:~ $ sudo apt install weewx
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 weewx : Depends: python3 (>= 3.7) but 3.5.3-1 is to be installed or
  python (>= 3.7) but 2.7.13-2 is to be installed
 Depends: python3-cheetah but it is not installable
E: Unable to correct problems, you have held broken packages.
pi@WeatherPi:~ $



On Fri, Jul 5, 2024 at 10:46 AM Tom Keffer  wrote:

> Be sure to see the Upgrade Guide 
> for how to upgrade!
>
> The major new feature is the ability to specify locales on a
> report-by-report basis. For example, you can feature both French and UK
> locales on your website.
>
> Also, a few bug fixes.
>
> Complete change log below
> --
>
> 5.1.0 07/04/2024
>
> If option lang is a valid locale, then it will be used to change locale
> as well as language. If it is not a valid locale, then the user's default
> locale will be used. For example, if lang=de_DE.utf8, then the German
> locale will be used. This allows locales to be set on a report-by-report
> basis. Addresses issue #867 .
>
> Allow country codes to be used in addition to a language code. For
> example, zh_CN would specify Chinese language, mainland China (Simplified
> Chinese), while zh_TW would specify Chinese language, Taiwan (Traditional
> Chinese).
>
> Added translation file for Simplified Chinese (zh_CN.conf). Thanks to
> user Kranz!
>
> Allow the utility weectl import to update old records in addition to
> importing new records. PR #930 
> .
>
> Include the effective user and group to the log. PR #934
> .
>
> Allow extra command line options to be passed on to rsync. Fixes issue
> #951 .
>
> Return False from XTypes function has_data() if the type cannot be
> calculated. Thanks to Rich Bell! PR #929
> .
>
> Allow calculation of xtype aggregate with missing constituents. Related to
> PR #929 .
>
> Fix bug in tag $tag.obstype where obstype is an XType that cannot be
> calculated. Related to PR #929 .
>
> Fix bug that caused the loop_on_init setting in weewx.conf to be ignored.
> PR #935.
>
> Reinstate file weeutil/timediff.py. It's not used in WeeWX, but it is
> used by some extensions.
>
> Fixed bug in station config where config_units would fail if there was no
> Defaults section specified in StdReport.
>
> Use lower-case for the product and vendor codes in udev rules. Fixes issue
> #949.
>
> Do not make group changes if identity of user doing the install cannot be
> determined. PR #952
>
> For deb/rpm installs, set permissions on the configuration file to be not
> world-readable. PR #948
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web v

Re: [weewx-user] Problem with weewx after power failure

[dunbrokin]

Yes apologies, it has been so long since my system misbehaved (probably 10
years), I had forgotten what was required.

I looked back over the history of commands in the terminal of the Rpi and
found these commands: (probably given to me by you last time around)

1297 sudo /etc/init.d/weewx stop

1298 wee_device --dump

1299 wee_device --clear-memory

1300 sudo /etc/init.d/weewx start

I tried them and lo! and behold! We are back online!

Thank you to all who tried to help...always much appreciated.




On Sun, Apr 14, 2024 at 1:35 AM Tom Keffer  wrote:

> You're not giving us much information. At the very least, what kind of
> weather station? Better yet, include the log. See the wiki article *Help!
> Posting to weewx-user
> * for
> how to get a good log.
>
> The wlan0 entries are probably red herrings.
>
> -tk
>
> On Fri, Apr 12, 2024 at 5:38 PM Monica Mulholland 
> wrote:
>
>> My Rpi with weewx has been running very successfully for many
>> years.until we had a power failure recently. I can still get into my
>> Rpi from my desktop and see that it is runningbut nothing is been
>> updating on my website. It is still stuck at the time the power came back
>> on. I suppose it could be the battery on the external weather station but
>> that was changed recently and it the signal strength on the last webpage is
>> not showing any problem. When I look at the log, I get a stream of these.
>>
>> Apr 13 12:25:28 WeatherPi dhcpcd[349]: wlan0: Router Advertisement from
>> fe80::724f:57ff:feb7:82a1
>> Apr 13 12:25:28 WeatherPi dhcpcd[349]: wlan0: soliciting a DHCPv6 lease
>>
>> Can somebody who knows more about these things than me, please tell me
>> what is going on and how I can sort this out,
>>
>> Thanks in anticipation.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/e75c2ddf-368e-4e45-b0c9-e238058eeb4cn%40googlegroups.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/CAPq0zEAobmP7beSg4Nw4i%2BqM%2B9pui1SV9_25Zu8xChwjs-XwKg%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAF1oaffHzHAO-v5E_GwKxB6n7UR_9g7Bd7ANiyOwy7uphJyFTA%40mail.gmail.com.

Re: [weewx-user] Problem with weewx after power failure

[dunbrokin]

Yes tried that thank you!

On Sun, Apr 14, 2024 at 2:12 AM p q  wrote:

> Did you try rebooting the Pi? 😜
>
>
>
> On Sat, Apr 13, 2024, 6:35 AM Tom Keffer  wrote:
>
>> You're not giving us much information. At the very least, what kind of
>> weather station? Better yet, include the log. See the wiki article *Help!
>> Posting to weewx-user
>> * for
>> how to get a good log.
>>
>> The wlan0 entries are probably red herrings.
>>
>> -tk
>>
>> On Fri, Apr 12, 2024 at 5:38 PM Monica Mulholland 
>> wrote:
>>
>>> My Rpi with weewx has been running very successfully for many
>>> years.until we had a power failure recently. I can still get into my
>>> Rpi from my desktop and see that it is runningbut nothing is been
>>> updating on my website. It is still stuck at the time the power came back
>>> on. I suppose it could be the battery on the external weather station but
>>> that was changed recently and it the signal strength on the last webpage is
>>> not showing any problem. When I look at the log, I get a stream of these.
>>>
>>> Apr 13 12:25:28 WeatherPi dhcpcd[349]: wlan0: Router Advertisement from
>>> fe80::724f:57ff:feb7:82a1
>>> Apr 13 12:25:28 WeatherPi dhcpcd[349]: wlan0: soliciting a DHCPv6 lease
>>>
>>> Can somebody who knows more about these things than me, please tell me
>>> what is going on and how I can sort this out,
>>>
>>> Thanks in anticipation.
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to weewx-user+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/e75c2ddf-368e-4e45-b0c9-e238058eeb4cn%40googlegroups.com
>>> 
>>> .
>>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/CAPq0zEAobmP7beSg4Nw4i%2BqM%2B9pui1SV9_25Zu8xChwjs-XwKg%40mail.gmail.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/CAA1SM23dvAKSawpfjTSjkoPHnJOwwB0W8S7pL8n6n8H2zeEDzA%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAF1oafd%2ByK5_3_qtr9eJW_0OyyAXYrup-HyovUjy_Pb-iTDK3A%40mail.gmail.com.

Re: [weewx-user] Problem with weewx after power failure

[dunbrokin]

[image: image.png]


On Sat, Apr 13, 2024 at 12:38 PM Monica Mulholland 
wrote:

> My Rpi with weewx has been running very successfully for many
> years.until we had a power failure recently. I can still get into my
> Rpi from my desktop and see that it is runningbut nothing is been
> updating on my website. It is still stuck at the time the power came back
> on. I suppose it could be the battery on the external weather station but
> that was changed recently and it the signal strength on the last webpage is
> not showing any problem. When I look at the log, I get a stream of these.
>
> Apr 13 12:25:28 WeatherPi dhcpcd[349]: wlan0: Router Advertisement from
> fe80::724f:57ff:feb7:82a1
> Apr 13 12:25:28 WeatherPi dhcpcd[349]: wlan0: soliciting a DHCPv6 lease
>
> Can somebody who knows more about these things than me, please tell me
> what is going on and how I can sort this out,
>
> Thanks in anticipation.
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/e75c2ddf-368e-4e45-b0c9-e238058eeb4cn%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAF1oafdbgiMdGakXU8gy8dQ9HJpqwDyomc_qj9r1KjawMu4nMw%40mail.gmail.com.

Re: [weewx-user] Re: WeeWX 4.10.1 not updating web page graphics

[dunbrokin]

I have the same problem. Graphs no longer updatingthe information (at
the side) in the boxes/spreadsheet is updated.but not the graphs. I
have rebooted and it made no difference.

On Sat, Feb 4, 2023 at 4:38 AM Tom Keffer  wrote:

> See this thread
> .
>
> On Fri, Feb 3, 2023 at 7:19 AM Ed James  wrote:
>
>> On Friday, February 3, 2023 at 4:42:30 AM UTC-7 gjr80 wrote:
>>
>>> Impossible to say without seeing the log. Refer to this wiki page
>>> 
>>> about getting a good log extract.
>>>
>>> Gary
>>>
>>> On Friday, 3 February 2023 at 20:00:14 UTC+10 sylvain.d...@gmail.com
>>> wrote:
>>>
 Hi, since version 4.10.1 the graphs are no longer updated. I changed
 the imagegenerator.py file. Since then I have no more error message, but
 the graphs only update once after a restart best regards Sylvain
>>>
>>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/0b3a4ede-ecee-4df6-ba6d-93e23c79d01dn%40googlegroups.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/CAPq0zEAZpGYuVk6ZJt7nU2Y26Vfj8d8OtPgjcSSZAEYJ9tRKtg%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAF1oafcKhyZu4Ej1Vdp%2BnLHd_aH13grXVnK2bcU_O6637KYJBQ%40mail.gmail.com.

Re: [weewx-user] How to pronounce "WeeWX"

[dunbrokin]

I pronounce it WeeWix!

On Mon, Aug 12, 2019 at 6:49 PM Michi Kaa  wrote:

> I've searched the docs, the forum, the web.
>
> How is "WeeWX" pronounced?
>
> Or maybe first: Is "WeeWX" pronounced? Or do you simply say "double u e e
> double u ex?" or "double u double e double u ex?" Is it an abbreviation? An
> akronym?
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/85a5c5e8-c207-401a-8803-047d5bf6c2ab%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAF1oafemLrSSAX2ftKqgiaa3Q7a6v3__SOMGUS9QLhifoA83yQ%40mail.gmail.com.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

Thanks, but no I don't I use VNC.

On Tue, Jan 29, 2019 at 11:35 AM  wrote:

> Just a quick question. Do you have a monitor (like the Pi 7 in touch
> screen) attached that is running off the same power supply as the Pi? I had
> a setup like that which used a splitter to power both the monitor and Pi
> from one power pack. My setup kept complaining of undervolting until I
> removed the splitter and plugged the monitor and pi each into their own
> power supply.
>
> phil
>
> On Monday, January 28, 2019 at 3:41:15 PM UTC-5, monmul wrote:
>>
>> I have replaced the power unit, taken it off the power strip an plugged
>> both it and the Vanatage into the mains. I have replaced the powered hub
>> (official RPi one...with another official RPi one) ...and here is what I am
>> getting...very dispirited! I have another Davis Weather Envoy which I
>> will soon substitute for the one I am currently using.but nothing seems
>> to make a difference and the Envoy just will not wake up!
>>
>> pi@raspberrypi:~ $ sudo tail -f /var/log/syslog
>> Jan 29 09:14:05 raspberrypi udisksd[766]: Mounted /dev/sda1 at
>> /media/pi/e78ab10a-51d2-40f0-aa6d-5f2d2b0f27b7 on behalf of uid 1000
>> Jan 29 09:14:05 raspberrypi vncserver-x11[453,root]: SPrintConnMgr:
>> Failed to add printer: server-error-service-unavailable
>> Jan 29 09:14:07 raspberrypi dhcpcd[338]: wlan0: no IPv6 Routers available
>> Jan 29 09:14:10 raspberrypi kernel: [   22.871754] Voltage normalised
>> (0x)
>> Jan 29 09:14:12 raspberrypi weewx[506]: vantage: Unable to wake up console
>> Jan 29 09:14:12 raspberrypi weewx[506]: import of driver failed: Unable
>> to wake up Vantage console ()
>> Jan 29 09:14:12 raspberrypi weewx[506]: engine: Unable to load driver:
>> Unable to wake up Vantage console
>> Jan 29 09:14:12 raspberrypi weewx[506]:   Exiting...
>> Jan 29 09:14:27 raspberrypi kernel: [   39.511958] Under-voltage
>> detected! (0x00050005)
>> Jan 29 09:14:31 raspberrypi kernel: [   43.671921] Voltage normalised
>> (0x)
>> Jan 29 09:15:00 raspberrypi ntpd[467]: Soliciting pool server 103.239.8.22
>> Jan 29 09:15:00 raspberrypi ntpd[467]: Soliciting pool server
>> 202.46.185.18
>> Jan 29 09:15:01 raspberrypi ntpd[467]: Soliciting pool server
>> 203.99.128.48
>> Jan 29 09:15:01 raspberrypi ntpd[467]: Soliciting pool server
>> 103.106.66.123
>> Jan 29 09:15:02 raspberrypi ntpd[467]: Soliciting pool server
>> 103.242.68.69
>> Jan 29 09:15:02 raspberrypi ntpd[467]: Soliciting pool server
>> 103.106.65.219
>> Jan 29 09:15:02 raspberrypi ntpd[467]: Soliciting pool server 103.242.70.5
>> Jan 29 09:15:02 raspberrypi ntpd[467]: Soliciting pool server
>> 122.252.188.99
>> Jan 29 09:15:03 raspberrypi ntpd[467]: Soliciting pool server
>> 130.217.226.51
>> Jan 29 09:15:03 raspberrypi ntpd[467]: Soliciting pool server
>> 103.242.68.68
>> Jan 29 09:15:03 raspberrypi ntpd[467]: Soliciting pool server
>> 203.99.128.34
>> Jan 29 09:15:04 raspberrypi ntpd[467]: Soliciting pool server
>> 202.46.177.18
>> Jan 29 09:15:04 raspberrypi ntpd[467]: Soliciting pool server
>> 2407:f100:0:4::3
>> Jan 29 09:15:06 raspberrypi ntpd[467]: Soliciting pool server
>> 202.46.178.18
>> Jan 29 09:17:41 raspberrypi systemd[584]: Time has been changed
>> Jan 29 09:17:41 raspberrypi systemd[1]: Time has been changed
>> Jan 29 09:17:41 raspberrypi systemd[1]: apt-daily.timer: Adding 9h 28min
>> 39.184756s random time.
>> Jan 29 09:17:41 raspberrypi systemd[1]: apt-daily-upgrade.timer: Adding
>> 27min 17.961005s random time.
>> Jan 29 09:18:28 raspberrypi kernel: [  126.872661] Under-voltage
>> detected! (0x00050005)
>> Jan 29 09:18:34 raspberrypi kernel: [  133.112736] Voltage normalised
>> (0x)
>> Jan 29 09:18:34 raspberrypi CRON[1276]: (root) CMD (   cd / && run-parts
>> --report /etc/cron.hourly)
>> Jan 29 09:22:29 raspberrypi kernel: [  368.155297]
>> rpi_firmware_get_throttled: 2 callbacks suppressed
>> Jan 29 09:22:29 raspberrypi kernel: [  368.155304] Under-voltage
>> detected! (0x00050005)
>> Jan 29 09:22:33 raspberrypi kernel: [  372.315315]
>> rpi_firmware_get_throttled: 2 callbacks suppressed
>> Jan 29 09:22:33 raspberrypi kernel: [  372.315322] Voltage normalised
>> (0x)
>> Jan 29 09:24:27 raspberrypi kernel: [  486.716533] Under-voltage
>> detected! (0x00050005)
>> Jan 29 09:24:34 raspberrypi kernel: [  492.956607] Voltage normalised
>> (0x)
>> Jan 29 09:26:28 raspberrypi kernel: [  607.357755] Under-voltage
>> detected! (0x00050005)
>> Jan 29 09:26:32 raspberrypi kernel: [  611.517793] Voltage normalised
>> (0x)
>> Jan 29 09:26:45 raspberrypi ntpd[467]: 203.99.128.34 local addr 10.1.1.7
>> -> 
>> Jan 29 09:30:13 raspberrypi ntpd[467]: 103.239.8.22 local addr 10.1.1.7
>> -> 
>> Jan 29 09:30:45 raspberrypi ntpd[467]: 203.99.128.48 local addr 10.1.1.7
>> -> 
>> Jan 29 09:31:18 raspberrypi ntpd[467]: 122.252.188.99 local addr 10.1.1.7
>> -> 
>> Jan 29 09:31:23 raspberrypi systemd[1]: Starting Cleanup of Temporary
>> Directories...
>> Jan

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

I am using a powered hub and I am using the official RPi power source.

On Mon, Jan 28, 2019 at 10:05 PM Andrew Milner 
wrote:

> I would suggest you work on eliminating the under voltage errors before
> trying to work out why you cannot communicate with the weather station.
> The implication is that the RPi is having trouble coping with whatever you
> have got connected via usb and/or network.  This is not unusual and
> indicates you may need either a larger power supply or a powered usb hub to
> cope with your usb loads.
>
>
>
> On Monday, 28 January 2019 10:52:28 UTC+2, monmul wrote:
>>
>> My Pi stopped reporting at 19.20 today and despite rebooting twice, it
>> does not seem to be able to wake up the console..is there a way/log I
>> can query to find out why it might have stopped at 19.10it was working
>> fine for 2 or 3 days. Here is the syslog...
>>
>> pi@raspberrypi:~ $ sudo tail -f /var/log/syslog
>> Jan 28 21:43:57 raspberrypi dhcpcd[350]: wlan0: no IPv6 Routers available
>> Jan 28 21:44:02 raspberrypi weewx[510]: vantage: Unable to wake up console
>> Jan 28 21:44:02 raspberrypi weewx[510]: import of driver failed: Unable
>> to wake up Vantage console ()
>> Jan 28 21:44:02 raspberrypi weewx[510]: engine: Unable to load driver:
>> Unable to wake up Vantage console
>> Jan 28 21:44:02 raspberrypi weewx[510]:   Exiting...
>> Jan 28 21:44:03 raspberrypi vncserver-x11[461,root]: Connections:
>> connected: 10.1.1.155::40108 (TCP)
>> Jan 28 21:44:03 raspberrypi vncserver-x11[461,root]: Connections:
>> authenticated: 10.1.1.155::40108 (TCP), as (anonymous) (d permissions)
>> Jan 28 21:44:04 raspberrypi vncserver-x11[461,root]: SPrintConnMgr:
>> Failed to add printer: server-error-service-unavailable
>> Jan 28 21:44:04 raspberrypi kernel: [   27.031827] Under-voltage
>> detected! (0x00050005)
>> Jan 28 21:44:10 raspberrypi kernel: [   33.271789] Voltage normalised
>> (0x)
>> Jan 28 21:44:53 raspberrypi ntpd[484]: Soliciting pool server
>> 88.191.250.97
>> Jan 28 21:44:53 raspberrypi ntpd[484]: Soliciting pool server 37.187.18.4
>> Jan 28 21:44:53 raspberrypi ntpd[484]: Soliciting pool server
>> 103.106.66.123
>> Jan 28 21:44:54 raspberrypi ntpd[484]: Soliciting pool server
>> 103.106.65.219
>> Jan 28 21:44:54 raspberrypi ntpd[484]: Soliciting pool server
>> 203.159.70.33
>> Jan 28 21:44:54 raspberrypi ntpd[484]: Soliciting pool server 103.242.70.5
>> Jan 28 21:44:54 raspberrypi ntpd[484]: Soliciting pool server
>> 203.86.206.43
>> Jan 28 21:44:54 raspberrypi ntpd[484]: Soliciting pool server 103.242.70.4
>> Jan 28 21:44:55 raspberrypi ntpd[484]: Soliciting pool server 185.242.56.3
>> Jan 28 21:44:55 raspberrypi ntpd[484]: Soliciting pool server
>> 103.242.68.69
>> Jan 28 21:44:55 raspberrypi ntpd[484]: Soliciting pool server
>> 130.217.226.49
>> Jan 28 21:44:56 raspberrypi ntpd[484]: Soliciting pool server
>> 122.252.188.99
>> Jan 28 21:44:57 raspberrypi ntpd[484]: Soliciting pool server
>> 202.78.240.38
>> Jan 28 21:44:57 raspberrypi ntpd[484]: Soliciting pool server
>> 202.46.179.18
>> Jan 28 21:44:57 raspberrypi ntpd[484]: Soliciting pool server
>> 2407:f100:0:1::2
>> Jan 28 21:44:58 raspberrypi ntpd[484]: Soliciting pool server
>> 130.217.226.51
>> Jan 28 21:45:08 raspberrypi systemd[589]: Time has been changed
>> Jan 28 21:45:08 raspberrypi systemd[1]: Time has been changed
>> Jan 28 21:45:08 raspberrypi systemd[1]: apt-daily.timer: Adding 10h 7min
>> 19.972590s random time.
>> Jan 28 21:45:08 raspberrypi systemd[1]: apt-daily-upgrade.timer: Adding
>> 37min 57.400920s random time.
>> Jan 28 21:45:08 raspberrypi ntpd[484]: receive: Unexpected origin
>> timestamp 0xdff93f8c.e12c4d6d does not match aorg 00. from
>> ser...@203.159.70.33 xmt 0xdff93f94.5a13b23a
>> Jan 28 21:45:08 raspberrypi ntpd[484]: receive: Unexpected origin
>> timestamp 0xdff93f8c.e1319bed does not match aorg 00. from
>> ser...@37.187.18.4 xmt 0xdff93f94.62dbcbad
>> Jan 28 21:47:56 raspberrypi kernel: [  251.674064] Under-voltage
>> detected! (0x00050005)
>> Jan 28 21:48:02 raspberrypi kernel: [  257.914050] Voltage normalised
>> (0x)
>>
>>
>> On Saturday, 26 January 2019 15:12:12 UTC+13, monmul wrote:
>>>
>>> Not a problem, you pointed me in the right direction which was all I
>>> needed..thanks again!
>>>
>>> On Saturday, 26 January 2019 15:09:22 UTC+13, gjr80 wrote:

 My apologies if I lead you astray, I did mentioning dumping but did not
 list the command. Was out at the time and on the mobile.

 Gary

>>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving 

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

Thank you for that!

On Wed, Jan 23, 2019 at 1:38 AM Andrew Milner 
wrote:

> there are 'official' readings at LOOP intervals as well as REC (archive)
> intervals.
>
> You have the option in weewx.conf [StdArchive] section of saying whether
> to use loop value for max reading or archive value.  If you specify loop
> then $day.windGust.maxtime should correspond to the LOOP time of the high
> gust of the day.
>
>
>
> On Tuesday, 22 January 2019 11:54:55 UTC+2, monmul wrote:
>>
>> It would appear (from comparing the data to the gust speed actually
>> occurring) that, despite the wind speed recorder operating on a real time
>> basis, the record of the gust speed is the speed when the set reading
>> interval occurs rather than the max speed during the time  between
>> "official" readings. Is this the case? Is there a way I can get the live
>> gust speed?
>>
>> On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote:
>>>
>>> I am new to weewx and am trying to set it up on my Rpi 3. I have a Davis
>>> Vantage weather station. I have a serial Envoy data logger attaced to my
>>> Rpi with a serial/usb converter. In following the set up instructions, I
>>> get these errors!
>>>
>>> sudo weewxd weewx.conf
>>> Traceback (most recent call last):
>>>   File "/usr/bin/weewxd", line 64, in 
>>> weewx.engine.main(options, args)
>>>   File "/usr/share/weewx/weewx/engine.py", line 835, in main
>>> sane = os.stat(config_path).st_ctime
>>> OSError: [Errno 2] No such file or directory: '/home/pi/weewx.conf'
>>> pi@Weatherpi:~ $ tail -f /var/log/syslog
>>> Jan  6 13:37:43 Weatherpi bluetoothd[843]: Endpoint unregistered:
>>> sender=:1.16 path=/MediaEndpoint/A2DPSink
>>> Jan  6 13:37:47 Weatherpi dhcpcd[498]: wlan0: no IPv6 Routers available
>>> Jan  6 13:37:48 Weatherpi dhcpcd[498]: eth0: no IPv6 Routers available
>>> Jan  6 13:37:57 Weatherpi systemd[852]: Time has been changed
>>> Jan  6 13:37:57 Weatherpi systemd[1]: Time has been changed
>>> Jan  6 13:41:05 Weatherpi rsyslogd-2007: action 'action 17' suspended,
>>> next retry is Sun Jan  6 13:41:35 2019 [try
>>> http://www.rsyslog.com/e/2007 ]
>>> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Initializing weewx
>>> version 3.8.2
>>> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Using Python 2.7.9
>>> (default, Sep 26 2018, 05:58:52) #012[GCC 4.9.2]
>>> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Platform
>>> Linux-4.9.35-v7+-armv7l-with-debian-8.0
>>> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Locale is 'en_GB.UTF-8'
>>> Jan  6 13:52:34 Weatherpi systemd[1]: Starting Cleanup of Temporary
>>> Directories...
>>> Jan  6 13:52:34 Weatherpi rsyslogd-2007: action 'action 17' suspended,
>>> next retry is Sun Jan  6 13:53:04 2019 [try
>>> http://www.rsyslog.com/e/2007 ]
>>> Jan  6 13:52:35 Weatherpi systemd[1]: Started Cleanup of Temporary
>>> Directories.
>>> Jan  6 13:55:28 Weatherpi wpa_supplicant[590]: wlan0: WPA: Group
>>> rekeying completed with 30:5a:3a:cd:e7:f0 [GTK=CCMP]
>>> Jan  6 13:55:28 Weatherpi rsyslogd-2007: action 'action 17' suspended,
>>> next retry is Sun Jan  6 13:55:58 2019 [try
>>> http://www.rsyslog.com/e/2007 ]
>>> Jan  6 13:55:28 Weatherpi wpa_supplicant[590]: wlan0: WPA: Group
>>> rekeying completed with 30:5a:3a:cd:e7:f0 [GTK=CCMP]
>>>
>>> Please where have I gone wrong?
>>>
>>>
>>> .
>>>
>>> Hi,
>>>
>>> It appears that you are in the /home/pi directory and hence weewxd is
>>> looking for weewx.conf in /home/pi. Use the full path for weewx.conf ie:
>>>
>>> $ sudo weewxd /etc/weewx/weewx.conf
>>>
>>> Gary
>>>
>>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

Wow! cool thanks!

On Wed, Jan 16, 2019 at 9:17 PM gjr80  wrote:

> wee_import will import it all month by month. You just drop all your log
> files into a single directory and wee_import works through the lot.
>
> Gary
>
> On Wednesday, 16 January 2019 18:12:48 UTC+10, monmul wrote:
>>
>> Great thank you so much!should I import month by month...or transfer
>> all the monthly data to one big file (probably 100 months in total) and
>> import it in one big hit?
>>
>> On Wed, Jan 16, 2019 at 8:47 PM gjr80  wrote:
>>
>>> Good. I have a first cut of a wee_import that supports importing
>>> Weather Display logs sort of working. Should not be too long, just needs a
>>> bit more work to sort out a few minor issues.
>>>
>>> Gary
>>>
>>> On Wednesday, 16 January 2019 17:44:03 UTC+10, monmul wrote:

 I changed it in skin.conf and everything is working fine now (well it
 will require a minor tweak or two :) )..thank you once again Gary for
 your patience and commitment...I have only one more part of the project
 to complete, if you could please guide me on how to import the historical
 data

 --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to weewx-user+...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

Great thank you so much!should I import month by month...or transfer
all the monthly data to one big file (probably 100 months in total) and
import it in one big hit?

On Wed, Jan 16, 2019 at 8:47 PM gjr80  wrote:

> Good. I have a first cut of a wee_import that supports importing Weather
> Display logs sort of working. Should not be too long, just needs a bit more
> work to sort out a few minor issues.
>
> Gary
>
> On Wednesday, 16 January 2019 17:44:03 UTC+10, monmul wrote:
>>
>> I changed it in skin.conf and everything is working fine now (well it
>> will require a minor tweak or two :) )..thank you once again Gary for
>> your patience and commitment...I have only one more part of the project
>> to complete, if you could please guide me on how to import the historical
>> data
>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

H.I thought the error was in skin.confbut you think it might be
in weewx.conf.

On Wed, Jan 16, 2019 at 8:04 PM gjr80  wrote:

> Jan 16 19:17:34 raspberrypi weewx[530]: reportengine: Failed to read skin
>> configuration file /etc/weewx/skins/Standard/skin.conf for report
>> StandardReport: Duplicate keyword name at line 229.
>
>
> And there is your clue... Have a look at line 229 (or thereabout) in
> weewx.conf, you have a duplicate config option name. Hard to say what it
> is without seeing weewx.conf. Under any given set of [] (or [[]], [[[]]]
> etc) each config option name must be unique, eg you cannot define template
> = twice under [[[year]]]. Similarly each child [[]], [[[]]] etc must be
> named uniquely. Have a look and see what you can find. If you can't find it
> post the offending part of weewx.conf (with any sensitive info removed of
> course).
>
> Gary
>
>
> On Wednesday, 16 January 2019 16:21:04 UTC+10, monmul wrote:
>>
>> So, here is what happenedthe report got ignored!!
>>
>> i@raspberrypi:~ $ sudo tail -f /var/log/syslog
>> Jan 16 19:17:32 raspberrypi weewx[530]: cheetahgenerator: Generated 1
>> files for report xstats in 0.09 seconds
>> Jan 16 19:17:32 raspberrypi weewx[530]: ftpgenerator: ftp'd 1 files in
>> 0.62 seconds
>> Jan 16 19:17:34 raspberrypi weewx[530]: reportengine: Failed to read skin
>> configuration file /etc/weewx/skins/Standard/skin.conf for report
>> StandardReport: Duplicate keyword name at line 229.
>> Jan 16 19:17:34 raspberrypi weewx[530]:   Report ignored
>> Jan 16 19:17:34 raspberrypi weewx[530]: cheetahgenerator: Generated 1
>> files for report xstats in 0.07 seconds
>> Jan 16 19:17:34 raspberrypi weewx[530]: engine: Launch of report thread
>> aborted: existing report thread still running
>> Jan 16 19:17:34 raspberrypi weewx[530]: ftpgenerator: ftp'd 1 files in
>> 0.62 seconds
>> Jan 16 19:17:52 raspberrypi kernel: [  112.313399] Voltage normalised
>> (0x)
>> Jan 16 19:18:08 raspberrypi kernel: [  128.953478] Under-voltage
>> detected! (0x00050005)
>> Jan 16 19:18:13 raspberrypi kernel: [  133.113393] Voltage normalised
>> (0x)
>>
>> On Wednesday, 16 January 2019 13:00:18 UTC+13, gjr80 wrote:
>>>
>>> WeeWX generates reports from template files through a skin. Each skin
>>> has a skin config file, skin.conf, which, among other things, tells
>>> weeWX which templates to process. To complete the picture each skin to be
>>> processed by weeWX is listed in weewx.conf under [StdReport]. Now that
>>> you are getting into customizing reports/templates it's probably worth your
>>> while have a read through the The standard reporting service, StdReport
>>> 
>>> in the Customization Guide.
>>>
>>> You basically have two choices; create a new skin and add your template
>>> to it or add your template to an existing skin. Since you are adding a new
>>> page with similar look and feel to your existing site it makes sense to do
>>> the latter and just add your template to the existing Standard skin. To
>>> do this:
>>>
>>> 1. edit skins/Standard/skin.conf
>>> 2. locate the [[ToDate]] stanza which is under [CheetahGenerator]
>>> 3. you will see here all the other templates that weeWX is to process.
>>> Just pick a spot and add in your template, I would put it after
>>> [[[year]]] just to keep the pattern but it doesn't really matter. I
>>> will not tell you what to enter, am sure you can work that out :)
>>> 4. save skin.conf
>>> 5. if you have not already done so make sure a copy of your template
>>> file is in the skins/Standard directory
>>>
>>> That's it, weeWX should process your template on the next report cycle.
>>> The proof will be your generated report (page/file) appearing in the same
>>> directory as all the other Standard skin files. You can also monitor your
>>> log for errors, if everything goes fine you will not see much in the log
>>> just one extra file being generated for the Standard skin, if there are
>>> errors you should see them in the log.
>>>
>>> I guess you will; let us know how you go!
>>>
>>> You might also want to have a read through the [CheetahGenerator]
>>> section  of
>>> the Customization Guide.
>>>
>>> Gary
>>>
>>> On Wednesday, 16 January 2019 05:57:22 UTC+10, monmul wrote:

 Thank you again Gary,...now after I have made these changeshow do I
 actually "run" or whatever this template file?

 On Tuesday, 15 January 2019 20:03:21 UTC+13, gjr80 wrote:
>
> A few comments.
>
>- the python inline code I provided to calculate max annual
>rainfall needs to have a # at the start of each line
>- not sure you really want the following your template, I just
>included it in my example code to show how you would use the tags:
>
> #if $max_rain_year is not None
> Maximum annual rain

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

Thanks for that...will do!

On Mon, Jan 14, 2019 at 2:45 PM Greg Troxel  wrote:

> monmul  writes:
>
> > I am searching for how to turn off showing the "internal temperature"
> graph
> > but cannot see a anything in skin.conf or in weewx.conf.what am
> I
> > missing?
>
> Also, if your real goal is to not disclose the internal temperature,
> rather than to simply omit it from the page, you should look for it more
> broadly, including week/month/year, anything for mobile, rss files,
> smartphone formatting, and the actual generation of the graphs (in
> skin.conf).
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

Thank you so much!

On Mon, Jan 7, 2019 at 8:29 PM gjr80  wrote:

> Yes. That is a setting for the console rather than a weeWX config setting.
> You have two choices; you can set it manually via buttons on the console or
> you can set it using the wee_device
>  utility. To do
> the former you need to read the console manual :) For the latter have a
> look through the wee_device Vantage notes
> , you need to use the 
> --set-offset
> action .
> Something like:
>
> $ wee_device --set-offset=windDir,180
>
> should do the trick, in fact that is one of the examples. Note you may or
> may not need to prefix that with sudo. Just make sure you read through the
> Vantage wee_device notes first, make sure you stop weeWX before using
> wee_device (only one thing can talk to the console at once) and check the
> setting afterwards with wee_device --info
>
> Gary
>
> On Monday, 7 January 2019 16:22:40 UTC+10, monmul wrote:
>
>> Ooops! one more thing.how do I do a wind offset? I cannot see it in
>> the config file?!
>>
>> On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote:
>>>
>>> I am new to weewx and am trying to set it up on my Rpi 3. I have a Davis
>>> Vantage weather station. I have a serial Envoy data logger attaced to my
>>> Rpi with a serial/usb converter. In following the set up instructions, I
>>> get these errors!
>>>
>>> sudo weewxd weewx.conf
>>> Traceback (most recent call last):
>>>   File "/usr/bin/weewxd", line 64, in 
>>> weewx.engine.main(options, args)
>>>   File "/usr/share/weewx/weewx/engine.py", line 835, in main
>>> sane = os.stat(config_path).st_ctime
>>> OSError: [Errno 2] No such file or directory: '/home/pi/weewx.conf'
>>> pi@Weatherpi:~ $ tail -f /var/log/syslog
>>> Jan  6 13:37:43 Weatherpi bluetoothd[843]: Endpoint unregistered:
>>> sender=:1.16 path=/MediaEndpoint/A2DPSink
>>> Jan  6 13:37:47 Weatherpi dhcpcd[498]: wlan0: no IPv6 Routers available
>>> Jan  6 13:37:48 Weatherpi dhcpcd[498]: eth0: no IPv6 Routers available
>>> Jan  6 13:37:57 Weatherpi systemd[852]: Time has been changed
>>> Jan  6 13:37:57 Weatherpi systemd[1]: Time has been changed
>>> Jan  6 13:41:05 Weatherpi rsyslogd-2007: action 'action 17' suspended,
>>> next retry is Sun Jan  6 13:41:35 2019 [try
>>> http://www.rsyslog.com/e/2007 ]
>>> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Initializing weewx
>>> version 3.8.2
>>> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Using Python 2.7.9
>>> (default, Sep 26 2018, 05:58:52) #012[GCC 4.9.2]
>>> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Platform
>>> Linux-4.9.35-v7+-armv7l-with-debian-8.0
>>> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Locale is 'en_GB.UTF-8'
>>> Jan  6 13:52:34 Weatherpi systemd[1]: Starting Cleanup of Temporary
>>> Directories...
>>> Jan  6 13:52:34 Weatherpi rsyslogd-2007: action 'action 17' suspended,
>>> next retry is Sun Jan  6 13:53:04 2019 [try
>>> http://www.rsyslog.com/e/2007 ]
>>> Jan  6 13:52:35 Weatherpi systemd[1]: Started Cleanup of Temporary
>>> Directories.
>>> Jan  6 13:55:28 Weatherpi wpa_supplicant[590]: wlan0: WPA: Group
>>> rekeying completed with 30:5a:3a:cd:e7:f0 [GTK=CCMP]
>>> Jan  6 13:55:28 Weatherpi rsyslogd-2007: action 'action 17' suspended,
>>> next retry is Sun Jan  6 13:55:58 2019 [try
>>> http://www.rsyslog.com/e/2007 ]
>>> Jan  6 13:55:28 Weatherpi wpa_supplicant[590]: wlan0: WPA: Group
>>> rekeying completed with 30:5a:3a:cd:e7:f0 [GTK=CCMP]
>>>
>>> Please where have I gone wrong?
>>>
>>>
>>> .
>>>
>>> Hi,
>>>
>>> It appears that you are in the /home/pi directory and hence weewxd is
>>> looking for weewx.conf in /home/pi. Use the full path for weewx.conf ie:
>>>
>>> $ sudo weewxd /etc/weewx/weewx.conf
>>>
>>> Gary
>>>
>>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

Hmmm! Something weird is happening the cat syslog will not display as far
as today and stops part way through and crashes VNC so it has to reconnect!

On Mon, Jan 7, 2019 at 6:12 PM dunbrokin  wrote:

> @Weatherpi:~ $ sudo systemctl status weewx
> ● weewx.service - LSB: weewx weather system
>Loaded: loaded (/etc/init.d/weewx)
>Active: active (exited) since Mon 2019-01-07 17:17:08 NZDT; 55min ago
>   Process: 510 ExecStart=/etc/init.d/weewx start (code=exited,
> status=0/SUCCESS)
>
> Jan 07 17:17:08 Weatherpi weewx[594]: engine: Platform
> Linux-4.9.35-v7+-arm0
> Jan 07 17:17:08 Weatherpi weewx[594]: engine: Locale is 'en_GB.UTF-8'
> Jan 07 17:17:08 Weatherpi weewx[594]: engine: pid file is
> /var/run/weewx.pid
> Jan 07 17:17:08 Weatherpi weewx[806]: engine: Using configuration file
> /etc...nf
> Jan 07 17:17:08 Weatherpi weewx[806]: engine: Loading station type Vantage
> ...e)
> Jan 07 17:17:08 Weatherpi weewx[510]: Starting weewx weather system: weewx.
> Jan 07 17:17:08 Weatherpi systemd[1]: Started LSB: weewx weather system.
> Jan 07 17:17:08 Weatherpi weewx[806]: import of driver failed: could not
> op...>)
> Jan 07 17:17:08 Weatherpi weewx[806]: engine: Unable to load driver: could
> ...0'
> Jan 07 17:17:08 Weatherpi weewx[806]:   Exiting...
> Hint: Some lines were ellipsized, use -l to show in full.
> pi@Weatherpi:~ $
>
>
> On Mon, Jan 7, 2019 at 4:38 PM gjr80  wrote:
>
>> So you are able to SSH into the RPi? Assuming you can, once the RPi has
>> booted check on the status of the weeWX daemon:
>>
>> $ sudo systemctl status weewx
>>
>> What does that show?
>>
>> Also have another look at the log. There will be a lot of stuff there
>> from when the RPi booted but you should also see some lines that have weewx
>> and a number in square brackets eg:
>>
>> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Initializing weewx
>> version 3.8.2
>> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Using Python 2.7.9 (
>> default, Sep 26 2018, 05:58:52) #012[GCC 4.9.2]
>> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Platform Linux-4.9.35-v7+-
>> armv7l-with-debian-8.0
>> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Locale is 'en_GB.UTF-8'
>>
>> What do those entries say? Post a good deal of them or right through
>> until you see some errors from weeWX (if there are any). More is better,
>> less just leave us guessing.
>>
>> Gary
>>
>> On Monday, 7 January 2019 11:22:16 UTC+10, monmul wrote:
>>>
>>> Thanks for that Gary, I might have to park the history project for a
>>> while as I seem to have bigger problems!
>>>
>>> I had everything running nicely - updating WU and was able to see my
>>> output on index.html.and then I went headless... shutdown pulled out
>>> the screen, keyboard and mouse and rebooted.now it will not update WU
>>> nor can I see it working on
>>> file:///var/www/html/weewx/index.html.Hm! I wonder what I might
>>> have done wrong now!
>>>
>>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

@Weatherpi:~ $ sudo systemctl status weewx
● weewx.service - LSB: weewx weather system
   Loaded: loaded (/etc/init.d/weewx)
   Active: active (exited) since Mon 2019-01-07 17:17:08 NZDT; 55min ago
  Process: 510 ExecStart=/etc/init.d/weewx start (code=exited,
status=0/SUCCESS)

Jan 07 17:17:08 Weatherpi weewx[594]: engine: Platform
Linux-4.9.35-v7+-arm0
Jan 07 17:17:08 Weatherpi weewx[594]: engine: Locale is 'en_GB.UTF-8'
Jan 07 17:17:08 Weatherpi weewx[594]: engine: pid file is /var/run/weewx.pid
Jan 07 17:17:08 Weatherpi weewx[806]: engine: Using configuration file
/etc...nf
Jan 07 17:17:08 Weatherpi weewx[806]: engine: Loading station type Vantage
...e)
Jan 07 17:17:08 Weatherpi weewx[510]: Starting weewx weather system: weewx.
Jan 07 17:17:08 Weatherpi systemd[1]: Started LSB: weewx weather system.
Jan 07 17:17:08 Weatherpi weewx[806]: import of driver failed: could not
op...>)
Jan 07 17:17:08 Weatherpi weewx[806]: engine: Unable to load driver: could
...0'
Jan 07 17:17:08 Weatherpi weewx[806]:   Exiting...
Hint: Some lines were ellipsized, use -l to show in full.
pi@Weatherpi:~ $


On Mon, Jan 7, 2019 at 4:38 PM gjr80  wrote:

> So you are able to SSH into the RPi? Assuming you can, once the RPi has
> booted check on the status of the weeWX daemon:
>
> $ sudo systemctl status weewx
>
> What does that show?
>
> Also have another look at the log. There will be a lot of stuff there from
> when the RPi booted but you should also see some lines that have weewx and
> a number in square brackets eg:
>
> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Initializing weewx version
> 3.8.2
> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Using Python 2.7.9 (default
> , Sep 26 2018, 05:58:52) #012[GCC 4.9.2]
> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Platform Linux-4.9.35-v7+-
> armv7l-with-debian-8.0
> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Locale is 'en_GB.UTF-8'
>
> What do those entries say? Post a good deal of them or right through until
> you see some errors from weeWX (if there are any). More is better, less
> just leave us guessing.
>
> Gary
>
> On Monday, 7 January 2019 11:22:16 UTC+10, monmul wrote:
>>
>> Thanks for that Gary, I might have to park the history project for a
>> while as I seem to have bigger problems!
>>
>> I had everything running nicely - updating WU and was able to see my
>> output on index.html.and then I went headless... shutdown pulled out
>> the screen, keyboard and mouse and rebooted.now it will not update WU
>> nor can I see it working on
>> file:///var/www/html/weewx/index.html.Hm! I wonder what I might
>> have done wrong now!
>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

No, its not that...I have set weewx up to start on bootand it was doing
so when not headlessso I presumed it would be the same when it was
running headless

On Mon, Jan 7, 2019 at 2:28 PM monmul  wrote:

> Duh! thanks Gary!
>
> On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote:
>>
>> I am new to weewx and am trying to set it up on my Rpi 3. I have a Davis
>> Vantage weather station. I have a serial Envoy data logger attaced to my
>> Rpi with a serial/usb converter. In following the set up instructions, I
>> get these errors!
>>
>> sudo weewxd weewx.conf
>> Traceback (most recent call last):
>>   File "/usr/bin/weewxd", line 64, in 
>> weewx.engine.main(options, args)
>>   File "/usr/share/weewx/weewx/engine.py", line 835, in main
>> sane = os.stat(config_path).st_ctime
>> OSError: [Errno 2] No such file or directory: '/home/pi/weewx.conf'
>> pi@Weatherpi:~ $ tail -f /var/log/syslog
>> Jan  6 13:37:43 Weatherpi bluetoothd[843]: Endpoint unregistered:
>> sender=:1.16 path=/MediaEndpoint/A2DPSink
>> Jan  6 13:37:47 Weatherpi dhcpcd[498]: wlan0: no IPv6 Routers available
>> Jan  6 13:37:48 Weatherpi dhcpcd[498]: eth0: no IPv6 Routers available
>> Jan  6 13:37:57 Weatherpi systemd[852]: Time has been changed
>> Jan  6 13:37:57 Weatherpi systemd[1]: Time has been changed
>> Jan  6 13:41:05 Weatherpi rsyslogd-2007: action 'action 17' suspended,
>> next retry is Sun Jan  6 13:41:35 2019 [try http://www.rsyslog.com/e/2007
>>  ]
>> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Initializing weewx version
>> 3.8.2
>> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Using Python 2.7.9
>> (default, Sep 26 2018, 05:58:52) #012[GCC 4.9.2]
>> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Platform
>> Linux-4.9.35-v7+-armv7l-with-debian-8.0
>> Jan  6 13:41:06 Weatherpi weewx[1515]: engine: Locale is 'en_GB.UTF-8'
>> Jan  6 13:52:34 Weatherpi systemd[1]: Starting Cleanup of Temporary
>> Directories...
>> Jan  6 13:52:34 Weatherpi rsyslogd-2007: action 'action 17' suspended,
>> next retry is Sun Jan  6 13:53:04 2019 [try http://www.rsyslog.com/e/2007
>>  ]
>> Jan  6 13:52:35 Weatherpi systemd[1]: Started Cleanup of Temporary
>> Directories.
>> Jan  6 13:55:28 Weatherpi wpa_supplicant[590]: wlan0: WPA: Group rekeying
>> completed with 30:5a:3a:cd:e7:f0 [GTK=CCMP]
>> Jan  6 13:55:28 Weatherpi rsyslogd-2007: action 'action 17' suspended,
>> next retry is Sun Jan  6 13:55:58 2019 [try http://www.rsyslog.com/e/2007
>>  ]
>> Jan  6 13:55:28 Weatherpi wpa_supplicant[590]: wlan0: WPA: Group rekeying
>> completed with 30:5a:3a:cd:e7:f0 [GTK=CCMP]
>>
>> Please where have I gone wrong?
>>
>>
>> .
>>
>> Hi,
>>
>> It appears that you are in the /home/pi directory and hence weewxd is
>> looking for weewx.conf in /home/pi. Use the full path for weewx.conf ie:
>>
>> $ sudo weewxd /etc/weewx/weewx.conf
>>
>> Gary
>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

Thanks for that Gary, I might have to park the history project for a while
as I seem to have bigger problems!

I had everything running nicely - updating WU and was able to see my output
on index.html.and then I went headless... shutdown pulled out the
screen, keyboard and mouse and rebooted.now it will not update WU nor
can I see it working on file:///var/www/html/weewx/index.html.Hm! I
wonder what I might have done wrong now!

On Mon, Jan 7, 2019 at 12:22 PM gjr80  wrote:

> WeeWX stores its data in the archive table in your weewx database, one
> archive record per row. A summary table is created for each observation
> field that records daily highs/lows/sums, counts and times etc. These
> summary tables are used as an optimization strategy when aggregates are
> sought from the historical data. There are a couple of ways to import data.
> the first is the use of the weeWX utility wee_import
> <http://weewx.com/docs/utilities.htm#wee_import_utility>, this is the
> preferred way to import data but it only supports importing data from a CSV
> format file, Cumulus monthly log files and Weatherunderground. The other
> approach is to manually add rows to the archive table and then rebuild the
> daily summaries. Rebuilding the daily summaries is easy using wee_database
> <http://weewx.com/docs/utilities.htm#wee_database_utility>, adding rows
> to the archive will be a slow manual process. You may think that adding
> highs/lows to the daily summaries is a solution, it is not.
>
> In terms of importing your WD data I guess the options are limited, I have
> little WD knowledge but if you can get the data into one of the formats
> supported by wee_import that would work (if you google the weewx forums
> this has come up once or twice before, not sure if there was a third party
> utility that converted WD data into a format that wee_import supports).
> Manually adding data is going to take a long time considering you have 5
> years of data. I have had a task to add WD support to wee_import for some
> time now, there has been little call for it so it has taken a back seat. I
> am happy to look into this again, it won't happen today or tomorrow but
> then again that is the beauty of importing historical data, the data is not
> going anywhere so the time imperative is not there. If I have some details
> about the data structure and format I can look at what be done with
> wee_import.
>
> A word of warning, manipulating the weeWX database manually can be
> hazardous to the continued good and proper operation of weeWX, do so at
> your own risk and always make sure you have a backup of your database.
>
> Gary
>
> On Monday, 7 January 2019 06:40:23 UTC+10, monmul wrote:
>>
>> Next issue for me is to import historic information (about 5 years
>> worth...or just the highs and lows during that period of each measured
>> item) into weewx? Where is the historic information stored and is there an
>> easy way of importing the data from WeatherDisplay?
>>
>> On Mon, Jan 7, 2019 at 9:35 AM dunbrokin  wrote:
>>
>>> Right I have 10.1.1.1 and 8.8.4.4 as "nameserver"  (while shown as
>>> "name_servers" in the resolvconf.conf file) in the resolv.conf fileI
>>> presume that will do the job?
>>>
>>>
>>> On Mon, Jan 7, 2019 at 9:32 AM Scott Grayban  wrote:
>>>
>>>> Ahh I didn't know that. I don't install resolvconfd.
>>>> On Jan 6, 2019, at 12:30 PM, dunbrokin  wrote:
>>>>>
>>>>> Using nameserver instead of name_server means that none of them appear
>>>>> in the resolv.conf file!
>>>>>
>>>>> On Mon, Jan 7, 2019 at 9:27 AM dunbrokin < dunb...@gmail.com> wrote:
>>>>>
>>>>>> OK will do again. Just looked in the resolv.,conf file.I get
>>>>>> nameserver 8.8.4.4 but not the 8.8.8.8!
>>>>>>
>>>>>> On Mon, Jan 7, 2019 at 9:23 AM Scott Grayban < sgra...@gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Use
>>>>>>>
>>>>>>> nameserver not name_server
>>>>>>> On Jan 6, 2019, at 12:20 PM, dunbrokin < dunb...@gmail.com> wrote:
>>>>>>>>
>>>>>>>> Thank you so much for your help Scott!
>>>>>>>>
>>>>>>>> On Mon, Jan 7, 2019 at 9:14 AM Scott Grayban < sgra...@gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> If it works yes.
>>>>>>>>> On Jan 6, 2019, at 12:11 PM

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

Thank you for all your help Scott in getting me up and running.I
really appreciate it. Hopefully some other kind soul can come to the party
for the next step!

On Mon, Jan 7, 2019 at 9:42 AM Scott Grayban  wrote:

> That I can't help with. Sorry
> On Jan 6, 2019, at 12:40 PM, dunbrokin  wrote:
>>
>> Next issue for me is to import historic information (about 5 years
>> worth...or just the highs and lows during that period of each measured
>> item) into weewx? Where is the historic information stored and is there an
>> easy way of importing the data from WeatherDisplay?
>>
>> On Mon, Jan 7, 2019 at 9:35 AM dunbrokin < dunbro...@gmail.com> wrote:
>>
>>> Right I have 10.1.1.1 and 8.8.4.4 as "nameserver"  (while shown as
>>> "name_servers" in the resolvconf.conf file) in the resolv.conf fileI
>>> presume that will do the job?
>>>
>>>
>>> On Mon, Jan 7, 2019 at 9:32 AM Scott Grayban < sgray...@gmail.com>
>>> wrote:
>>>
>>>> Ahh I didn't know that. I don't install resolvconfd.
>>>> On Jan 6, 2019, at 12:30 PM, dunbrokin < dunbro...@gmail.com> wrote:
>>>>>
>>>>> Using nameserver instead of name_server means that none of them appear
>>>>> in the resolv.conf file!
>>>>>
>>>>> On Mon, Jan 7, 2019 at 9:27 AM dunbrokin < dunbro...@gmail.com>
>>>>> wrote:
>>>>>
>>>>>> OK will do again. Just looked in the resolv.,conf file.I get
>>>>>> nameserver 8.8.4.4 but not the 8.8.8.8!
>>>>>>
>>>>>> On Mon, Jan 7, 2019 at 9:23 AM Scott Grayban < sgray...@gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Use
>>>>>>>
>>>>>>> nameserver not name_server
>>>>>>> On Jan 6, 2019, at 12:20 PM, dunbrokin < dunbro...@gmail.com>
>>>>>>> wrote:
>>>>>>>>
>>>>>>>> Thank you so much for your help Scott!
>>>>>>>>
>>>>>>>> On Mon, Jan 7, 2019 at 9:14 AM Scott Grayban < sgray...@gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> If it works yes.
>>>>>>>>> On Jan 6, 2019, at 12:11 PM, dunbrokin < dunbro...@gmail.com>
>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> Great, thanks, will do.does this now get around the
>>>>>>>>>> installation of NTP daemon as recommended in the set up instructions?
>>>>>>>>>>
>>>>>>>>>> On Sun, Jan 6, 2019 at 9:54 PM Scott Grayban < sgray...@gmail.com>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> Ok replace that with this then reboot the PI and look at your
>>>>>>>>>>> weewx log again for the ntp sync.
>>>>>>>>>>>
>>>>>>>>>>> After reboot your  */etc/resolv.conf* should have those name
>>>>>>>>>>> servers listed
>>>>>>>>>>>
>>>>>>>>>>> # Configuration for resolvconf(8)
>>>>>>>>>>> # See resolvconf.conf(5) for details
>>>>>>>>>>>
>>>>>>>>>>> resolv_conf=/etc/resolv.conf
>>>>>>>>>>> # If you run a local name server, you should uncomment the below
>>>>>>>>>>> line and
>>>>>>>>>>> # configure your subscribers configuration files below.
>>>>>>>>>>> #nameserver 127.0.0.1
>>>>>>>>>>> nameserver 8.8.8.8
>>>>>>>>>>> nameserver 8.8.4.4
>>>>>>>>>>>
>>>>>>>>>>> # Mirror the Debian package defaults for the below resolvers
>>>>>>>>>>> # so that resolvconf integrates seemlessly.
>>>>>>>>>>> dnsmasq_resolv=/var/run/dnsmasq/resolv.conf
>>>>>>>>>>> pdnsd_conf=/etc/pdnsd.conf
>>>>>>>>>>> unbound_conf=/var/cache/unbound/resolvconf_resolvers.conf
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>&

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

Next issue for me is to import historic information (about 5 years
worth...or just the highs and lows during that period of each measured
item) into weewx? Where is the historic information stored and is there an
easy way of importing the data from WeatherDisplay?

On Mon, Jan 7, 2019 at 9:35 AM dunbrokin  wrote:

> Right I have 10.1.1.1 and 8.8.4.4 as "nameserver"  (while shown as
> "name_servers" in the resolvconf.conf file) in the resolv.conf fileI
> presume that will do the job?
>
>
> On Mon, Jan 7, 2019 at 9:32 AM Scott Grayban  wrote:
>
>> Ahh I didn't know that. I don't install resolvconfd.
>> On Jan 6, 2019, at 12:30 PM, dunbrokin  wrote:
>>>
>>> Using nameserver instead of name_server means that none of them appear
>>> in the resolv.conf file!
>>>
>>> On Mon, Jan 7, 2019 at 9:27 AM dunbrokin < dunbro...@gmail.com> wrote:
>>>
>>>> OK will do again. Just looked in the resolv.,conf file.I get
>>>> nameserver 8.8.4.4 but not the 8.8.8.8!
>>>>
>>>> On Mon, Jan 7, 2019 at 9:23 AM Scott Grayban < sgray...@gmail.com>
>>>> wrote:
>>>>
>>>>> Use
>>>>>
>>>>> nameserver not name_server
>>>>> On Jan 6, 2019, at 12:20 PM, dunbrokin < dunbro...@gmail.com> wrote:
>>>>>>
>>>>>> Thank you so much for your help Scott!
>>>>>>
>>>>>> On Mon, Jan 7, 2019 at 9:14 AM Scott Grayban < sgray...@gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> If it works yes.
>>>>>>> On Jan 6, 2019, at 12:11 PM, dunbrokin < dunbro...@gmail.com>
>>>>>>> wrote:
>>>>>>>>
>>>>>>>> Great, thanks, will do.does this now get around the
>>>>>>>> installation of NTP daemon as recommended in the set up instructions?
>>>>>>>>
>>>>>>>> On Sun, Jan 6, 2019 at 9:54 PM Scott Grayban < sgray...@gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Ok replace that with this then reboot the PI and look at your
>>>>>>>>> weewx log again for the ntp sync.
>>>>>>>>>
>>>>>>>>> After reboot your  */etc/resolv.conf* should have those name
>>>>>>>>> servers listed
>>>>>>>>>
>>>>>>>>> # Configuration for resolvconf(8)
>>>>>>>>> # See resolvconf.conf(5) for details
>>>>>>>>>
>>>>>>>>> resolv_conf=/etc/resolv.conf
>>>>>>>>> # If you run a local name server, you should uncomment the below
>>>>>>>>> line and
>>>>>>>>> # configure your subscribers configuration files below.
>>>>>>>>> #nameserver 127.0.0.1
>>>>>>>>> nameserver 8.8.8.8
>>>>>>>>> nameserver 8.8.4.4
>>>>>>>>>
>>>>>>>>> # Mirror the Debian package defaults for the below resolvers
>>>>>>>>> # so that resolvconf integrates seemlessly.
>>>>>>>>> dnsmasq_resolv=/var/run/dnsmasq/resolv.conf
>>>>>>>>> pdnsd_conf=/etc/pdnsd.conf
>>>>>>>>> unbound_conf=/var/cache/unbound/resolvconf_resolvers.conf
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>>> Groups "weewx-user" group.
>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>> send an email to weewx-user+unsubscr...@googlegroups.com.
>>>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>>>
>>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "weewx-user" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>> send an email to weewx-user+unsubscr...@googlegroups.com.
>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>
>>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "weewx-user" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to weewx-user+unsubscr...@googlegroups.com.
>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>
>>>> --
>>> You received this message because you are subscribed to a topic in the
>>> Google Groups "weewx-user" group.
>>> To unsubscribe from this topic, visit
>>> https://groups.google.com/d/topic/weewx-user/LGS3xtzmot0/unsubscribe.
>>> To unsubscribe from this group and all its topics, send an email to
>>> weewx-user+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

Right I have 10.1.1.1 and 8.8.4.4 as "nameserver"  (while shown as
"name_servers" in the resolvconf.conf file) in the resolv.conf fileI
presume that will do the job?


On Mon, Jan 7, 2019 at 9:32 AM Scott Grayban  wrote:

> Ahh I didn't know that. I don't install resolvconfd.
> On Jan 6, 2019, at 12:30 PM, dunbrokin  wrote:
>>
>> Using nameserver instead of name_server means that none of them appear in
>> the resolv.conf file!
>>
>> On Mon, Jan 7, 2019 at 9:27 AM dunbrokin < dunbro...@gmail.com> wrote:
>>
>>> OK will do again. Just looked in the resolv.,conf file.I get
>>> nameserver 8.8.4.4 but not the 8.8.8.8!
>>>
>>> On Mon, Jan 7, 2019 at 9:23 AM Scott Grayban < sgray...@gmail.com>
>>> wrote:
>>>
>>>> Use
>>>>
>>>> nameserver not name_server
>>>> On Jan 6, 2019, at 12:20 PM, dunbrokin < dunbro...@gmail.com> wrote:
>>>>>
>>>>> Thank you so much for your help Scott!
>>>>>
>>>>> On Mon, Jan 7, 2019 at 9:14 AM Scott Grayban < sgray...@gmail.com>
>>>>> wrote:
>>>>>
>>>>>> If it works yes.
>>>>>> On Jan 6, 2019, at 12:11 PM, dunbrokin < dunbro...@gmail.com> wrote:
>>>>>>>
>>>>>>> Great, thanks, will do.does this now get around the installation
>>>>>>> of NTP daemon as recommended in the set up instructions?
>>>>>>>
>>>>>>> On Sun, Jan 6, 2019 at 9:54 PM Scott Grayban < sgray...@gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Ok replace that with this then reboot the PI and look at your weewx
>>>>>>>> log again for the ntp sync.
>>>>>>>>
>>>>>>>> After reboot your  */etc/resolv.conf* should have those name
>>>>>>>> servers listed
>>>>>>>>
>>>>>>>> # Configuration for resolvconf(8)
>>>>>>>> # See resolvconf.conf(5) for details
>>>>>>>>
>>>>>>>> resolv_conf=/etc/resolv.conf
>>>>>>>> # If you run a local name server, you should uncomment the below
>>>>>>>> line and
>>>>>>>> # configure your subscribers configuration files below.
>>>>>>>> #nameserver 127.0.0.1
>>>>>>>> nameserver 8.8.8.8
>>>>>>>> nameserver 8.8.4.4
>>>>>>>>
>>>>>>>> # Mirror the Debian package defaults for the below resolvers
>>>>>>>> # so that resolvconf integrates seemlessly.
>>>>>>>> dnsmasq_resolv=/var/run/dnsmasq/resolv.conf
>>>>>>>> pdnsd_conf=/etc/pdnsd.conf
>>>>>>>> unbound_conf=/var/cache/unbound/resolvconf_resolvers.conf
>>>>>>>>
>>>>>>>> --
>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>> Groups "weewx-user" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>> send an email to weewx-user+unsubscr...@googlegroups.com.
>>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>>
>>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "weewx-user" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to weewx-user+unsubscr...@googlegroups.com.
>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>
>>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to weewx-user+unsubscr...@googlegroups.com.
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>> --
>> You received this message because you are subscribed to a topic in the
>> Google Groups "weewx-user" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/weewx-user/LGS3xtzmot0/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> weewx-user+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

Using nameserver instead of name_server means that none of them appear in
the resolv.conf file!

On Mon, Jan 7, 2019 at 9:27 AM dunbrokin  wrote:

> OK will do again. Just looked in the resolv.,conf file.I get
> nameserver 8.8.4.4 but not the 8.8.8.8!
>
> On Mon, Jan 7, 2019 at 9:23 AM Scott Grayban  wrote:
>
>> Use
>>
>> nameserver not name_server
>> On Jan 6, 2019, at 12:20 PM, dunbrokin  wrote:
>>>
>>> Thank you so much for your help Scott!
>>>
>>> On Mon, Jan 7, 2019 at 9:14 AM Scott Grayban  wrote:
>>>
>>>> If it works yes.
>>>> On Jan 6, 2019, at 12:11 PM, dunbrokin  wrote:
>>>>>
>>>>> Great, thanks, will do.does this now get around the installation
>>>>> of NTP daemon as recommended in the set up instructions?
>>>>>
>>>>> On Sun, Jan 6, 2019 at 9:54 PM Scott Grayban 
>>>>> wrote:
>>>>>
>>>>>> Ok replace that with this then reboot the PI and look at your weewx
>>>>>> log again for the ntp sync.
>>>>>>
>>>>>> After reboot your */etc/resolv.conf* should have those name servers
>>>>>> listed
>>>>>>
>>>>>> # Configuration for resolvconf(8)
>>>>>> # See resolvconf.conf(5) for details
>>>>>>
>>>>>> resolv_conf=/etc/resolv.conf
>>>>>> # If you run a local name server, you should uncomment the below line
>>>>>> and
>>>>>> # configure your subscribers configuration files below.
>>>>>> #nameserver 127.0.0.1
>>>>>> nameserver 8.8.8.8
>>>>>> nameserver 8.8.4.4
>>>>>>
>>>>>> # Mirror the Debian package defaults for the below resolvers
>>>>>> # so that resolvconf integrates seemlessly.
>>>>>> dnsmasq_resolv=/var/run/dnsmasq/resolv.conf
>>>>>> pdnsd_conf=/etc/pdnsd.conf
>>>>>> unbound_conf=/var/cache/unbound/resolvconf_resolvers.conf
>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "weewx-user" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to weewx-user+unsubscr...@googlegroups.com.
>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>
>>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to weewx-user+unsubscr...@googlegroups.com.
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

OK will do again. Just looked in the resolv.,conf file.I get nameserver
8.8.4.4 but not the 8.8.8.8!

On Mon, Jan 7, 2019 at 9:23 AM Scott Grayban  wrote:

> Use
>
> nameserver not name_server
> On Jan 6, 2019, at 12:20 PM, dunbrokin  wrote:
>>
>> Thank you so much for your help Scott!
>>
>> On Mon, Jan 7, 2019 at 9:14 AM Scott Grayban  wrote:
>>
>>> If it works yes.
>>> On Jan 6, 2019, at 12:11 PM, dunbrokin  wrote:
>>>>
>>>> Great, thanks, will do.does this now get around the installation of
>>>> NTP daemon as recommended in the set up instructions?
>>>>
>>>> On Sun, Jan 6, 2019 at 9:54 PM Scott Grayban 
>>>> wrote:
>>>>
>>>>> Ok replace that with this then reboot the PI and look at your weewx
>>>>> log again for the ntp sync.
>>>>>
>>>>> After reboot your */etc/resolv.conf* should have those name servers
>>>>> listed
>>>>>
>>>>> # Configuration for resolvconf(8)
>>>>> # See resolvconf.conf(5) for details
>>>>>
>>>>> resolv_conf=/etc/resolv.conf
>>>>> # If you run a local name server, you should uncomment the below line
>>>>> and
>>>>> # configure your subscribers configuration files below.
>>>>> #nameserver 127.0.0.1
>>>>> nameserver 8.8.8.8
>>>>> nameserver 8.8.4.4
>>>>>
>>>>> # Mirror the Debian package defaults for the below resolvers
>>>>> # so that resolvconf integrates seemlessly.
>>>>> dnsmasq_resolv=/var/run/dnsmasq/resolv.conf
>>>>> pdnsd_conf=/etc/pdnsd.conf
>>>>> unbound_conf=/var/cache/unbound/resolvconf_resolvers.conf
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "weewx-user" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to weewx-user+unsubscr...@googlegroups.com.
>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>
>>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to weewx-user+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

Just for the record, for anybody following this discussion, there is a
slight difference in my file to the solution shown abovenot sure it
makes much difference; but it may save some confusion.

min has "name_server" instead of "nameserver". I am assuming that
"name_server" is the one I should use.

On Mon, Jan 7, 2019 at 9:11 AM dunbrokin  wrote:

> Great, thanks, will do.does this now get around the installation of
> NTP daemon as recommended in the set up instructions?
>
> On Sun, Jan 6, 2019 at 9:54 PM Scott Grayban  wrote:
>
>> Ok replace that with this then reboot the PI and look at your weewx log
>> again for the ntp sync.
>>
>> After reboot your */etc/resolv.conf* should have those name servers
>> listed
>>
>> # Configuration for resolvconf(8)
>> # See resolvconf.conf(5) for details
>>
>> resolv_conf=/etc/resolv.conf
>> # If you run a local name server, you should uncomment the below line and
>> # configure your subscribers configuration files below.
>> #nameserver 127.0.0.1
>> nameserver 8.8.8.8
>> nameserver 8.8.4.4
>>
>> # Mirror the Debian package defaults for the below resolvers
>> # so that resolvconf integrates seemlessly.
>> dnsmasq_resolv=/var/run/dnsmasq/resolv.conf
>> pdnsd_conf=/etc/pdnsd.conf
>> unbound_conf=/var/cache/unbound/resolvconf_resolvers.conf
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

Thank you so much for your help Scott!

On Mon, Jan 7, 2019 at 9:14 AM Scott Grayban  wrote:

> If it works yes.
> On Jan 6, 2019, at 12:11 PM, dunbrokin  wrote:
>>
>> Great, thanks, will do.does this now get around the installation of
>> NTP daemon as recommended in the set up instructions?
>>
>> On Sun, Jan 6, 2019 at 9:54 PM Scott Grayban  wrote:
>>
>>> Ok replace that with this then reboot the PI and look at your weewx log
>>> again for the ntp sync.
>>>
>>> After reboot your */etc/resolv.conf* should have those name servers
>>> listed
>>>
>>> # Configuration for resolvconf(8)
>>> # See resolvconf.conf(5) for details
>>>
>>> resolv_conf=/etc/resolv.conf
>>> # If you run a local name server, you should uncomment the below line and
>>> # configure your subscribers configuration files below.
>>> #nameserver 127.0.0.1
>>> nameserver 8.8.8.8
>>> nameserver 8.8.4.4
>>>
>>> # Mirror the Debian package defaults for the below resolvers
>>> # so that resolvconf integrates seemlessly.
>>> dnsmasq_resolv=/var/run/dnsmasq/resolv.conf
>>> pdnsd_conf=/etc/pdnsd.conf
>>> unbound_conf=/var/cache/unbound/resolvconf_resolvers.conf
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to weewx-user+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

Great, thanks, will do.does this now get around the installation of NTP
daemon as recommended in the set up instructions?

On Sun, Jan 6, 2019 at 9:54 PM Scott Grayban  wrote:

> Ok replace that with this then reboot the PI and look at your weewx log
> again for the ntp sync.
>
> After reboot your */etc/resolv.conf* should have those name servers listed
>
> # Configuration for resolvconf(8)
> # See resolvconf.conf(5) for details
>
> resolv_conf=/etc/resolv.conf
> # If you run a local name server, you should uncomment the below line and
> # configure your subscribers configuration files below.
> #nameserver 127.0.0.1
> nameserver 8.8.8.8
> nameserver 8.8.4.4
>
> # Mirror the Debian package defaults for the below resolvers
> # so that resolvconf integrates seemlessly.
> dnsmasq_resolv=/var/run/dnsmasq/resolv.conf
> pdnsd_conf=/etc/pdnsd.conf
> unbound_conf=/var/cache/unbound/resolvconf_resolvers.conf
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

as in yes it does have a resolvconf.conf file.just in case there
was confusion!

On a totally different topic, Is there some where I can use an offset of
180 degrees for the wind? I cannot find it in the config file?

On Sun, Jan 6, 2019 at 7:43 PM dunbrokin  wrote:

> Yes it does!
>
>
> On Sun, Jan 6, 2019 at 7:11 PM Scott Grayban  wrote:
>
>> Does your PI have this file ?
>>
>> /etc/resolvconf.conf
>>
>> On Saturday, January 5, 2019 at 10:09:18 PM UTC-8, monmul wrote:
>>>
>>> The nameserver in my Pi /etc/resolv.cont is 10.1.1.1.as that is my
>>> modem?
>>> But these are extenal IP addresseswill that work?
>>>
>>> On Sun, Jan 6, 2019 at 6:50 PM Scott Grayban  wrote:
>>>
>>>> Forget that... you need to edit your /etc/resolv.conf
>>>>
>>>> Add
>>>> nameserver 8.8.8.8
>>>> nameserver 8.8.4.4
>>>>
>>>> Or whatever your dns is suppose to resolve to.
>>>>
>>>> On Saturday, January 5, 2019 at 9:47:00 PM UTC-8, Scott Grayban wrote:
>>>>>
>>>>> You need to fix this..
>>>>>
>>>>> apt install ntp
>>>>>
>>>>> ntpd_intres[684]: host name not found: 0.debian.pool.ntp.org
>>>>>
>>>>> On Saturday, January 5, 2019 at 9:39:44 PM UTC-8, monmul wrote:
>>>>>>
>>>>>> Jan  6 18:25:20 Weatherpi ntpd_intres[684]: host name not found:
>>>>>> 0.debian.pool.ntp.org
>>>>>> Jan  6 18:25:20 Weatherpi ntpd_intres[684]: host name not found:
>>>>>> 1.debian.pool.ntp.org
>>>>>> Jan  6 18:25:20 Weatherpi ntpd_intres[684]: host name not found:
>>>>>> 2.debian.pool.ntp.org
>>>>>> Jan  6 18:25:20 Weatherpi ntpd_intres[684]: host name not found:
>>>>>> 3.debian.pool.ntp.org
>>>>>>
>>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to weewx-user+...@googlegroups.com.
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

Yes it does!


On Sun, Jan 6, 2019 at 7:11 PM Scott Grayban  wrote:

> Does your PI have this file ?
>
> /etc/resolvconf.conf
>
> On Saturday, January 5, 2019 at 10:09:18 PM UTC-8, monmul wrote:
>>
>> The nameserver in my Pi /etc/resolv.cont is 10.1.1.1.as that is my
>> modem?
>> But these are extenal IP addresseswill that work?
>>
>> On Sun, Jan 6, 2019 at 6:50 PM Scott Grayban  wrote:
>>
>>> Forget that... you need to edit your /etc/resolv.conf
>>>
>>> Add
>>> nameserver 8.8.8.8
>>> nameserver 8.8.4.4
>>>
>>> Or whatever your dns is suppose to resolve to.
>>>
>>> On Saturday, January 5, 2019 at 9:47:00 PM UTC-8, Scott Grayban wrote:

 You need to fix this..

 apt install ntp

 ntpd_intres[684]: host name not found: 0.debian.pool.ntp.org

 On Saturday, January 5, 2019 at 9:39:44 PM UTC-8, monmul wrote:
>
> Jan  6 18:25:20 Weatherpi ntpd_intres[684]: host name not found:
> 0.debian.pool.ntp.org
> Jan  6 18:25:20 Weatherpi ntpd_intres[684]: host name not found:
> 1.debian.pool.ntp.org
> Jan  6 18:25:20 Weatherpi ntpd_intres[684]: host name not found:
> 2.debian.pool.ntp.org
> Jan  6 18:25:20 Weatherpi ntpd_intres[684]: host name not found:
> 3.debian.pool.ntp.org
>
 --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to weewx-user+...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

[dunbrokin]

The nameserver in my Pi /etc/resolv.cont is 10.1.1.1.as that is my
modem?
But these are extenal IP addresseswill that work?

On Sun, Jan 6, 2019 at 6:50 PM Scott Grayban  wrote:

> Forget that... you need to edit your /etc/resolv.conf
>
> Add
> nameserver 8.8.8.8
> nameserver 8.8.4.4
>
> Or whatever your dns is suppose to resolve to.
>
> On Saturday, January 5, 2019 at 9:47:00 PM UTC-8, Scott Grayban wrote:
>>
>> You need to fix this..
>>
>> apt install ntp
>>
>> ntpd_intres[684]: host name not found: 0.debian.pool.ntp.org
>>
>> On Saturday, January 5, 2019 at 9:39:44 PM UTC-8, monmul wrote:
>>>
>>> Jan  6 18:25:20 Weatherpi ntpd_intres[684]: host name not found:
>>> 0.debian.pool.ntp.org
>>> Jan  6 18:25:20 Weatherpi ntpd_intres[684]: host name not found:
>>> 1.debian.pool.ntp.org
>>> Jan  6 18:25:20 Weatherpi ntpd_intres[684]: host name not found:
>>> 2.debian.pool.ntp.org
>>> Jan  6 18:25:20 Weatherpi ntpd_intres[684]: host name not found:
>>> 3.debian.pool.ntp.org
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.