On Sunday, May 31, 2020 at 3:44:09 PM UTC-7, Luc Heijst wrote:
>
> Another approach for setting up the wifi is connect the RPi (the first
> time) with an ethernet cable to the network,
> Remote log in with a putty session and configure wifi with raspi-config.
> I also configure a static
Another approach for setting up the wifi is connect the RPi (the first
time) with an ethernet cable to the network,
Remote log in with a putty session and configure wifi with raspi-config.
I also configure a static ip-address for the network module(s) in my router.
BTW the models 1B and 2B don’t
On Sunday, May 31, 2020 at 1:47:51 PM UTC-7, Luc Heijst wrote:
>
> The boot process from a USB-stick as described above is simplified.
> See:
> https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/README.md
>
>
>
I might add - add a correct wpa_supplicant.conf file as well, if
The boot process from a USB-stick as described above is simplified.
See:
https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/README.md
Follow these steps:
1. Format a SD-card with fat32.
2. Write file bootcode.bin to the SD-card.
3. Write with program balenaEther the zip