Hi Gary,
Thanks for that. You are indeed right. The sensor details were there in
weewx.conf, but the header [[sensor_map]]was missing. I have added it in
now and restarted weewx and it is working.
https://www.windguru.cz/station/2146
This is a very interesting situation and now that i think
OK. So when run directly rtl_433 runs as expected. I appreciate that
running WeeWX directly resulted in no output, I suspect that is due to the
sdr driver (for one reason or another) not providing WeeWX with any loop
packets (the only console output you will get when running WeeWX is loop
Thanks for the replies,
When i stop weewx using 'sudo service weewx stop' and then i run 'sudo
rtl_433 -M utc -F json' this is what i get:
rtl_433 version 20.02-55-gc1d1f9f branch master at 202005162227 inputs file
rtl_tcp RTL-SDR
Use -h for usage help and see https://triq.org/ for
Thanks for the replies,
When i stop weewx using 'sudo service weewx stop' and then i run 'sudo
rtl_433 -M utc -F json' this is what i get:
rtl_433 version 20.02-55-gc1d1f9f branch master at 202005162227 inputs file
rtl_tcp RTL-SDR
Use -h for usage help and see https://triq.org/ for
Sean,
A few suggestions. First, don’t reformat and reinstall. From the log it is
pretty clear that something is causing rtl_433 to fail when run under WeeWX.
Let’s work through the sdr setup process again to make sure sdr is (still)
setup correctly. You said when run from the command line thee
Do you get any useful error messages from the driver if you run weewx from
the command line?
This smells like a data error and I don't know if reinstalling is the best
path forward.
On Sun, May 17, 2020 at 1:06 PM Sean Jahnig wrote:
> After hours of fiddling, it is still not working.
>
> When
After hours of fiddling, it is still not working.
When i change 'station_type' to Simulator, it starts publishing 0 to
windGuru. So that element is working. https://www.windguru.cz/station/2146
As soon as i change 'station_type' back to SDR it stops publishing.
When i run sudo rtl_433 -M utc
