Re: [weewx-user] vp2 - how to disable ch2?

2022-05-26 Thread Graham Eddy 
did that - envoy has now forgotten the old wireless station [RESOLVED] - thanks

it has been a lot of years since the envoy was last unpowered!

> On 27 May 2022, at 6:21 am, gjr80  wrote:
> 
> I don't have an Envoy but I understand it is a case of removing all power 
> sources, including batteries, waiting for 10-20 seconds for any capacitance 
> to discharge and then power up again. Don't know I would put the batteries in 
> reverse though.
> 
> Gary
> 
> On Wednesday, 25 May 2022 at 21:05:36 UTC+10 Graham Eddy wrote:
> i can power down, pull it apart, put the batteries in backwards. how do i 
> reset it?
> (and why would wee_device be failing to reconfigure ch2 but work successfully 
> otherwise?)
> 
> 
>> On 25 May 2022, at 8:13 pm, gjr80 > > wrote:
>> 
>> Doesn't leave many options. Can't power down/reset the envoy?
>> 
>> Gary
>> 
>> On Wednesday, 25 May 2022 at 19:53:32 UTC+10 Graham Eddy wrote:
>> data logger is in an envoy
>> 
>> 
>>> On 25 May 2022, at 7:25 pm, gjr80 > wrote:
>>> 
>> 
>>> Can't you set transmitter IDs manually via the console?
>>> 
>>> Gary
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to weewx-user+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/weewx-user/f5fd67c3-594c-45d3-9000-8f2b09a31e51n%40googlegroups.com
>  
> .

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/13B27969-E764-4CDF-80C8-5B336B8B9EE6%40geddy.au.

Re: [weewx-user] vp2 - how to disable ch2?

2022-05-26 Thread gjr80 
I don't have an Envoy but I understand it is a case of removing all power 
sources, including batteries, waiting for 10-20 seconds for any capacitance 
to discharge and then power up again. Don't know I would put the batteries 
in reverse though.

Gary

On Wednesday, 25 May 2022 at 21:05:36 UTC+10 Graham Eddy wrote:

> i can power down, pull it apart, put the batteries in backwards. how do i 
> reset it?
> (and why would wee_device be failing to reconfigure ch2 but work 
> successfully otherwise?)
>
>
> On 25 May 2022, at 8:13 pm, gjr80  wrote:
>
> Doesn't leave many options. Can't power down/reset the envoy?
>
> Gary
>
> On Wednesday, 25 May 2022 at 19:53:32 UTC+10 Graham Eddy wrote:
>
>> data logger is in an envoy
>>
>> On 25 May 2022, at 7:25 pm, gjr80  wrote:
>>
>> Can't you set transmitter IDs manually via the console?
>>
>> Gary
>>
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/f5fd67c3-594c-45d3-9000-8f2b09a31e51n%40googlegroups.com.

Re: [weewx-user] vp2 - how to disable ch2?

2022-05-25 Thread Graham Eddy 
i can power down, pull it apart, put the batteries in backwards. how do i reset 
it?
(and why would wee_device be failing to reconfigure ch2 but work successfully 
otherwise?)

> On 25 May 2022, at 8:13 pm, gjr80  wrote:
> 
> Doesn't leave many options. Can't power down/reset the envoy?
> 
> Gary
> 
> On Wednesday, 25 May 2022 at 19:53:32 UTC+10 Graham Eddy wrote:
> data logger is in an envoy
> 
> 
>> On 25 May 2022, at 7:25 pm, gjr80 > > wrote:
>> 
> 
>> Can't you set transmitter IDs manually via the console?
>> 
>> Gary

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/C6DEC2F7-0B3B-4FD4-ACD7-661727422852%40geddy.au.

Re: [weewx-user] vp2 - how to disable ch2?

2022-05-25 Thread gjr80 
Doesn't leave many options. Can't power down/reset the envoy?

Gary

On Wednesday, 25 May 2022 at 19:53:32 UTC+10 Graham Eddy wrote:

> data logger is in an envoy
>
> On 25 May 2022, at 7:25 pm, gjr80  wrote:
>
> Can't you set transmitter IDs manually via the console?
>
> Gary
>
> On Wednesday, 25 May 2022 at 18:18:36 UTC+10 Graham Eddy wrote:
>
>> QC is filtering out the bad values, but weewx server is currently 
>> resetting after 4 failed retries on regular basis while the phantom station 
>> haunts the vp2. there is no radio signal being transmitted to provide the 
>> extraTemp1 values, it is just a figment of data logger’s imagination. the 
>> phantom battery-low apparently from the ex-station stopped yesterday, but 
>> the data logger is still reporting the extraTemp1 despite my (failed) 
>> wee_device instruction just now to desist
>>
>> i do ‘wee_device —set-transmitter-type=2,10’ and it gives ’no ’ 
>> error.
>> then i do ‘wee_device —info’ and it reports ch2 still enabled
>> so it is not just a case of resetting memory/power
>>
>> weewx v4.5.1 using python3.7 on RPi 4B running buster with usb/serial
>> (vp2 firmware is from 2004. lately weewx has been resetting whenever the 
>> (now ex-) extra station reported low battery, so this bogus extraTemp1 
>> value upsetting weewx is kinda understandable → i need to turn all vestiges 
>> of the (ex-) extra station off)
>>
>> On 25 May 2022, at 5:53 pm, Stephen Hocking  wrote:
>>
>> Given such a whacko figure, perhaps under the [[Corrections]] section 
>> under [StdCalibrate], or more suitably, something under [StdQC].
>>
>> On Wed, 25 May 2022 at 17:45, Graham Eddy  wrote:
>>
>>> my old vantage pro2’s additional wireless temp station at ch2 (iss is at 
>>> ch1) has carked it (crushed in tree fall). it exists no more; it is not 
>>> transmitting. my vp2 data logger is faithfully reporting a phantom value of 
>>> about 150 C (not bad for a river!) every few seconds, how do i disable this 
>>> phantom?
>>>
>>> i tried (*with weewx not running*) ‘wee_device 
>>> --set-transmitter-type=2,10’ to set ch2 to none, but all i get is an 
>>> error ‘No  received from Vantage console’, and it continues 
>>> reporting the phantom when i start weewx again. how can i stop this phantom?
>>> cheers
>>>
>>> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to weewx-user+...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/weewx-user/70718B18-F8FE-49F8-8303-7BE22F28B8DC%40geddy.au
>>>  
>>> 
>>> .
>>>
>>
>>
>> -- 
>>
>>   "I and the public know
>>   what all schoolchildren learn
>>   Those to whom evil is done
>>   Do evil in return" W.H. Auden, "September 1, 1939"
>>
>>
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to weewx-user+...@googlegroups.com.
>>
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/weewx-user/CA%2BxzKjDCR-xMeMrCDm7_Nq1XeJikmWSJ9N1TYcPezwLc0x7h%3Dw%40mail.gmail.com
>>  
>> 
>> .
>>
>>
>>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to weewx-user+...@googlegroups.com.
>
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/weewx-user/3b764166-7458-4fd1-a0e7-4acbee17e7d4n%40googlegroups.com
>  
> 
> .
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/a8eed4cd-5995-448f-9922-cd2628f88e24n%40googlegroups.com.

Re: [weewx-user] vp2 - how to disable ch2?

2022-05-25 Thread Graham Eddy 
data logger is in an envoy

> On 25 May 2022, at 7:25 pm, gjr80  wrote:
> 
> Can't you set transmitter IDs manually via the console?
> 
> Gary
> 
> On Wednesday, 25 May 2022 at 18:18:36 UTC+10 Graham Eddy wrote:
> QC is filtering out the bad values, but weewx server is currently resetting 
> after 4 failed retries on regular basis while the phantom station haunts the 
> vp2. there is no radio signal being transmitted to provide the extraTemp1 
> values, it is just a figment of data logger’s imagination. the phantom 
> battery-low apparently from the ex-station stopped yesterday, but the data 
> logger is still reporting the extraTemp1 despite my (failed) wee_device 
> instruction just now to desist
> 
> i do ‘wee_device —set-transmitter-type=2,10’ and it gives ’no ’ error.
> then i do ‘wee_device —info’ and it reports ch2 still enabled
> so it is not just a case of resetting memory/power
> 
> weewx v4.5.1 using python3.7 on RPi 4B running buster with usb/serial
> (vp2 firmware is from 2004. lately weewx has been resetting whenever the (now 
> ex-) extra station reported low battery, so this bogus extraTemp1 value 
> upsetting weewx is kinda understandable → i need to turn all vestiges of the 
> (ex-) extra station off)
> 
> 
>> On 25 May 2022, at 5:53 pm, Stephen Hocking > > wrote:
>> 
> 
>> Given such a whacko figure, perhaps under the [[Corrections]] section under 
>> [StdCalibrate], or more suitably, something under [StdQC].
>> 
>> On Wed, 25 May 2022 at 17:45, Graham Eddy > > wrote:
>> my old vantage pro2’s additional wireless temp station at ch2 (iss is at 
>> ch1) has carked it (crushed in tree fall). it exists no more; it is not 
>> transmitting. my vp2 data logger is faithfully reporting a phantom value of 
>> about 150 C (not bad for a river!) every few seconds, how do i disable this 
>> phantom?
>> 
>> i tried (with weewx not running) ‘wee_device --set-transmitter-type=2,10’ to 
>> set ch2 to none, but all i get is an error ‘No  received from Vantage 
>> console’, and it continues reporting the phantom when i start weewx again. 
>> how can i stop this phantom?
>> cheers
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to weewx-user+...@googlegroups.com 
>> .
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/weewx-user/70718B18-F8FE-49F8-8303-7BE22F28B8DC%40geddy.au
>>  
>> .
>> 
>> 
>> -- 
>>   "I and the public know
>>   what all schoolchildren learn
>>   Those to whom evil is done
>>   Do evil in return" W.H. Auden, "September 1, 1939"
>> 
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to weewx-user+...@googlegroups.com 
>> .
> 
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/weewx-user/CA%2BxzKjDCR-xMeMrCDm7_Nq1XeJikmWSJ9N1TYcPezwLc0x7h%3Dw%40mail.gmail.com
>>  
>> .
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to weewx-user+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/weewx-user/3b764166-7458-4fd1-a0e7-4acbee17e7d4n%40googlegroups.com
>  
> .

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/D38AF7A8-8AC0-4A50-8F49-F98A595EFEF3%40geddy.au.

Re: [weewx-user] vp2 - how to disable ch2?

2022-05-25 Thread gjr80 
Can't you set transmitter IDs manually via the console?

Gary

On Wednesday, 25 May 2022 at 18:18:36 UTC+10 Graham Eddy wrote:

> QC is filtering out the bad values, but weewx server is currently 
> resetting after 4 failed retries on regular basis while the phantom station 
> haunts the vp2. there is no radio signal being transmitted to provide the 
> extraTemp1 values, it is just a figment of data logger’s imagination. the 
> phantom battery-low apparently from the ex-station stopped yesterday, but 
> the data logger is still reporting the extraTemp1 despite my (failed) 
> wee_device instruction just now to desist
>
> i do ‘wee_device —set-transmitter-type=2,10’ and it gives ’no ’ error.
> then i do ‘wee_device —info’ and it reports ch2 still enabled
> so it is not just a case of resetting memory/power
>
> weewx v4.5.1 using python3.7 on RPi 4B running buster with usb/serial
> (vp2 firmware is from 2004. lately weewx has been resetting whenever the 
> (now ex-) extra station reported low battery, so this bogus extraTemp1 
> value upsetting weewx is kinda understandable → i need to turn all vestiges 
> of the (ex-) extra station off)
>
> On 25 May 2022, at 5:53 pm, Stephen Hocking  wrote:
>
> Given such a whacko figure, perhaps under the [[Corrections]] section 
> under [StdCalibrate], or more suitably, something under [StdQC].
>
> On Wed, 25 May 2022 at 17:45, Graham Eddy  wrote:
>
>> my old vantage pro2’s additional wireless temp station at ch2 (iss is at 
>> ch1) has carked it (crushed in tree fall). it exists no more; it is not 
>> transmitting. my vp2 data logger is faithfully reporting a phantom value of 
>> about 150 C (not bad for a river!) every few seconds, how do i disable this 
>> phantom?
>>
>> i tried (*with weewx not running*) ‘wee_device 
>> --set-transmitter-type=2,10’ to set ch2 to none, but all i get is an 
>> error ‘No  received from Vantage console’, and it continues 
>> reporting the phantom when i start weewx again. how can i stop this phantom?
>> cheers
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to weewx-user+...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/weewx-user/70718B18-F8FE-49F8-8303-7BE22F28B8DC%40geddy.au
>>  
>> 
>> .
>>
>
>
> -- 
>
>   "I and the public know
>   what all schoolchildren learn
>   Those to whom evil is done
>   Do evil in return"  W.H. Auden, "September 1, 1939"
>
>
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to weewx-user+...@googlegroups.com.
>
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/weewx-user/CA%2BxzKjDCR-xMeMrCDm7_Nq1XeJikmWSJ9N1TYcPezwLc0x7h%3Dw%40mail.gmail.com
>  
> 
> .
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/3b764166-7458-4fd1-a0e7-4acbee17e7d4n%40googlegroups.com.

Re: [weewx-user] vp2 - how to disable ch2?

2022-05-25 Thread Stephen Hocking 
An alternative might be to use a different driver - does rtl_433 pick up
its transmissions? If so, using the SDR driver could work, and you wouldn't
have weewx resetting after failed USB comms.

On Wed, 25 May 2022 at 18:18, Graham Eddy  wrote:

> QC is filtering out the bad values, but weewx server is currently
> resetting after 4 failed retries on regular basis while the phantom station
> haunts the vp2. there is no radio signal being transmitted to provide the
> extraTemp1 values, it is just a figment of data logger’s imagination. the
> phantom battery-low apparently from the ex-station stopped yesterday, but
> the data logger is still reporting the extraTemp1 despite my (failed)
> wee_device instruction just now to desist
>
> i do ‘wee_device —set-transmitter-type=2,10’ and it gives ’no ’ error.
> then i do ‘wee_device —info’ and it reports ch2 still enabled
> so it is not just a case of resetting memory/power
>
> weewx v4.5.1 using python3.7 on RPi 4B running buster with usb/serial
> (vp2 firmware is from 2004. lately weewx has been resetting whenever the
> (now ex-) extra station reported low battery, so this bogus extraTemp1
> value upsetting weewx is kinda understandable → i need to turn all vestiges
> of the (ex-) extra station off)
>
> On 25 May 2022, at 5:53 pm, Stephen Hocking 
> wrote:
>
> Given such a whacko figure, perhaps under the [[Corrections]] section
> under [StdCalibrate], or more suitably, something under [StdQC].
>
> On Wed, 25 May 2022 at 17:45, Graham Eddy  wrote:
>
>> my old vantage pro2’s additional wireless temp station at ch2 (iss is at
>> ch1) has carked it (crushed in tree fall). it exists no more; it is not
>> transmitting. my vp2 data logger is faithfully reporting a phantom value of
>> about 150 C (not bad for a river!) every few seconds, how do i disable this
>> phantom?
>>
>> i tried (*with weewx not running*) ‘wee_device
>> --set-transmitter-type=2,10’ to set ch2 to none, but all i get is an
>> error ‘No  received from Vantage console’, and it continues
>> reporting the phantom when i start weewx again. how can i stop this phantom?
>> cheers
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/70718B18-F8FE-49F8-8303-7BE22F28B8DC%40geddy.au
>> 
>> .
>>
>
>
> --
>
>   "I and the public know
>   what all schoolchildren learn
>   Those to whom evil is done
>   Do evil in return"  W.H. Auden, "September 1, 1939"
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/CA%2BxzKjDCR-xMeMrCDm7_Nq1XeJikmWSJ9N1TYcPezwLc0x7h%3Dw%40mail.gmail.com
> 
> .
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/F4510CA0-CFDC-4855-A336-6A1FCED46B72%40geddy.au
> 
> .
>


-- 

  "I and the public know
  what all schoolchildren learn
  Those to whom evil is done
  Do evil in return"W.H. Auden, "September 1, 1939"

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CA%2BxzKjAMvAVCmnd9fGDeaB_%3D%3D1yvyxhJGtvU_%3D_o14sjR2AnpA%40mail.gmail.com.

Re: [weewx-user] vp2 - how to disable ch2?

2022-05-25 Thread Graham Eddy 
QC is filtering out the bad values, but weewx server is currently resetting 
after 4 failed retries on regular basis while the phantom station haunts the 
vp2. there is no radio signal being transmitted to provide the extraTemp1 
values, it is just a figment of data logger’s imagination. the phantom 
battery-low apparently from the ex-station stopped yesterday, but the data 
logger is still reporting the extraTemp1 despite my (failed) wee_device 
instruction just now to desist

i do ‘wee_device —set-transmitter-type=2,10’ and it gives ’no ’ error.
then i do ‘wee_device —info’ and it reports ch2 still enabled
so it is not just a case of resetting memory/power

weewx v4.5.1 using python3.7 on RPi 4B running buster with usb/serial
(vp2 firmware is from 2004. lately weewx has been resetting whenever the (now 
ex-) extra station reported low battery, so this bogus extraTemp1 value 
upsetting weewx is kinda understandable → i need to turn all vestiges of the 
(ex-) extra station off)

> On 25 May 2022, at 5:53 pm, Stephen Hocking  wrote:
> 
> Given such a whacko figure, perhaps under the [[Corrections]] section under 
> [StdCalibrate], or more suitably, something under [StdQC].
> 
> On Wed, 25 May 2022 at 17:45, Graham Eddy  > wrote:
> my old vantage pro2’s additional wireless temp station at ch2 (iss is at ch1) 
> has carked it (crushed in tree fall). it exists no more; it is not 
> transmitting. my vp2 data logger is faithfully reporting a phantom value of 
> about 150 C (not bad for a river!) every few seconds, how do i disable this 
> phantom?
> 
> i tried (with weewx not running) ‘wee_device --set-transmitter-type=2,10’ to 
> set ch2 to none, but all i get is an error ‘No  received from Vantage 
> console’, and it continues reporting the phantom when i start weewx again. 
> how can i stop this phantom?
> cheers
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to weewx-user+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/weewx-user/70718B18-F8FE-49F8-8303-7BE22F28B8DC%40geddy.au
>  
> .
> 
> 
> -- 
>   "I and the public know
>   what all schoolchildren learn
>   Those to whom evil is done
>   Do evil in return"  W.H. Auden, "September 1, 1939"
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to weewx-user+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/weewx-user/CA%2BxzKjDCR-xMeMrCDm7_Nq1XeJikmWSJ9N1TYcPezwLc0x7h%3Dw%40mail.gmail.com
>  
> .

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/F4510CA0-CFDC-4855-A336-6A1FCED46B72%40geddy.au.

Re: [weewx-user] vp2 - how to disable ch2?

2022-05-25 Thread Stephen Hocking 
Given such a whacko figure, perhaps under the [[Corrections]] section under
[StdCalibrate], or more suitably, something under [StdQC].

On Wed, 25 May 2022 at 17:45, Graham Eddy  wrote:

> my old vantage pro2’s additional wireless temp station at ch2 (iss is at
> ch1) has carked it (crushed in tree fall). it exists no more; it is not
> transmitting. my vp2 data logger is faithfully reporting a phantom value of
> about 150 C (not bad for a river!) every few seconds, how do i disable this
> phantom?
>
> i tried (*with weewx not running*) ‘wee_device --set-transmitter-type=2,10’
> to set ch2 to none, but all i get is an error ‘No  received from
> Vantage console’, and it continues reporting the phantom when i start
> weewx again. how can i stop this phantom?
> cheers
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/70718B18-F8FE-49F8-8303-7BE22F28B8DC%40geddy.au
> 
> .
>


-- 

  "I and the public know
  what all schoolchildren learn
  Those to whom evil is done
  Do evil in return"W.H. Auden, "September 1, 1939"

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CA%2BxzKjDCR-xMeMrCDm7_Nq1XeJikmWSJ9N1TYcPezwLc0x7h%3Dw%40mail.gmail.com.

[weewx-user] vp2 - how to disable ch2?

2022-05-25 Thread Graham Eddy 
my old vantage pro2’s additional wireless temp station at ch2 (iss is at ch1) 
has carked it (crushed in tree fall). it exists no more; it is not 
transmitting. my vp2 data logger is faithfully reporting a phantom value of 
about 150 C (not bad for a river!) every few seconds, how do i disable this 
phantom?

i tried (with weewx not running) ‘wee_device --set-transmitter-type=2,10’ to 
set ch2 to none, but all i get is an error ‘No  received from Vantage 
console’, and it continues reporting the phantom when i start weewx again. how 
can i stop this phantom?
cheers

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/70718B18-F8FE-49F8-8303-7BE22F28B8DC%40geddy.au.