Re: [weewx-user] Re: Apache is not showing /weewx on Ubuntu 16.04.1

2016-07-27 Thread Andrew Milner
You're probably right in that it looks as though the guide assumes apache2 is installed first, before the deb install - although there then appear to be some linguistic issues with present tense used when maybe it should be future!! I don't use apache2 either - preferring lighttpd on my rpi.

Re: [weewx-user] Re: Apache is not showing /weewx on Ubuntu 16.04.1

2016-07-27 Thread Andrew Milner
gt; apache2 according to this guide. > > The correct sequence is to install apache2 first and add weewx later? > > On Wednesday, July 27, 2016 at 11:19:59 AM UTC+2, Andrew Milner wrote: >> >> You're probably right in that it looks as though the guide assumes >> apache2 is

Re: [weewx-user] Re: Sending data throught TCP, UDP or modbus

2016-07-28 Thread Andrew Milner
NEW_LOOP_PACKET is the data from the hardware - and depending on the hardware may be either for all the sensors or just some - different hardware works in different ways. NEW_ARCHIVE_RECORD will be the average data values for all sensors received during the archive period (often 5 minutes).

[weewx-user] Re: weewx weewx[1488]: vantage: No received from console

2016-08-13 Thread Andrew Milner
Bad connection?? RPi power supply?? Powered hub?? On Sunday, 14 August 2016 03:58:06 UTC+3, Peter Ten Eyck wrote: > Davis Vantage Vue connect via serial -> USB to Raspberry Pi. > > Now getting: > > Aug 13 20:52:02 weewx weewx[1473]: Starting weewx weather system: weewx. > Aug 13 20:52:02

[weewx-user] fresh setup.py install issues

2016-08-06 Thread Andrew Milner
I just decided to do a fresh install on a new rpi3 with hdd and whilst following the user guide ran into a few issues. It seems that the user guide and wiki have been 'tweeked' for .deb package installs, rendering it a little harder to determine what is needed for a setup.py install. I think

[weewx-user] Re: fresh setup.py install issues

2016-08-06 Thread Andrew Milner
Thanks Matthew for the clarification (and for doing the update). Andrew On Saturday, 6 August 2016 13:28:19 UTC+3, mwall wrote: > wiki has been updated. > > you can symlink or copy. which you choose depends on how you like to > manage your system(s). > > m > -- You received this message

Re: [weewx-user] Re: WU Import Utility: **** Invalid --date option specified.

2017-02-03 Thread Andrew Milner
You're right On Friday, 3 February 2017 20:12:24 UTC+2, Den S wrote: > > From the utilities / weewx_import / importing from Weather Underground / > Step-by-step: > > To perform a dry run enter the following command: > > wee_import --import-config=/var/tmp/wu.conf --date="2016/01/20 >

[weewx-user] Re: Split weewx processing between two RPi's

2017-02-08 Thread Andrew Milner
!! At the moment this is blocking progress and further thoughts on the concept!!! On Wednesday, 8 February 2017 16:29:35 UTC+2, mwall wrote: > On Tuesday, February 7, 2017 at 11:14:25 AM UTC-5, Andrew Milner wrote: >> >> I have been considering having an old RPi outdoors connect

[weewx-user] Re: Webcam on a Raspberry Pi 3?

2017-02-06 Thread Andrew Milner
That's a bit harsh Vince - many people use a webcam to supply weather images for use on their weewx generated webpages . and the webcam capture may have to co-exist with the weewx weather station capture and subsequent data processing. Certainly some time ago I found that my original RPi

[weewx-user] Re: weewx status - answer

2017-02-06 Thread Andrew Milner
what more do you want to know?? It is either running or not running surely?? On Monday, 6 February 2017 18:23:43 UTC+2, Jiří Sachl wrote: > Raspberry Pi 3, Raspian Jessie, system upgrade, weewx 3.6.2 > > > root@weewx:~# service weewx status >> [ ok ] Status of weewx weather system: running.

Re: [weewx-user] Re: SDR/RTL Process stops when using MySQL Database

2017-02-05 Thread Andrew Milner
Clay - since weewx configuration changes do not usually require a database to be dropped and recreated empty can you clarify what reconfiguration changes you had made and what the logs showed? On Sunday, 5 February 2017 22:26:35 UTC+2, Clay Jackson wrote: > Problem solved! Turns out that

Re: [weewx-user] Re: SDR/RTL Process stops when using MySQL Database

2017-02-05 Thread Andrew Milner
pport USB). > > > > > > *From:* weewx...@googlegroups.com [mailto: > weewx...@googlegroups.com ] *On Behalf Of *Andrew Milner > *Sent:* Sunday, February 5, 2017 8:12 PM > *To:* weewx-user <weewx...@googlegroups.com > > *Subject:* Re: [weewx-user] Re: SDR/RTL Process stop

[weewx-user] Re: Get rid of Indoor Temp Graph

2017-02-05 Thread Andrew Milner
Just comment it out of the image generator section of skins/Standard/skin.conf to stop the plotg being created and comment out the references to the appropriate plot in the plot division towards the end of the templates. You may even be able to use the same method as for the tabular (see how

Re: [weewx-user] Re: WU Import Utility: **** Invalid --date option specified.

2017-02-03 Thread Andrew Milner
I couldn't see any inconsistency in the documentation either - just in your 'example' in the post. On Friday, 3 February 2017 16:35:47 UTC+2, gjr80 wrote: > > Den, > > Yes, dates are separated by - not /, I should not have rushed my reply as > I was going out the door. > er > I had a quick

Re: [weewx-user] Re: Missing index.html

2017-02-03 Thread Andrew Milner
How about posting 1) the logfile 2) the output from running wee_debug On Friday, 3 February 2017 17:53:58 UTC+2, Jiří Sachl wrote: > after reboot > >> root@weewx:~# /etc/init.d/weewx status >> [ ok ] Status of weewx weather system: running. >> root@weewx:~# >> >> nothing more > I was truly

[weewx-user] Re: Spike detection - any willing testers

2017-01-21 Thread Andrew Milner
What is the theory behind the changes, and how do the changes impact the various measurements and differ from the original?? On Saturday, 21 January 2017 14:11:30 UTC+2, Darryn Capes-Davis wrote: > > Hi All, > > I have modified the SqtQC service so it can do spike detection. I am after > anyone

Re: [weewx-user] Re: only database driver

2017-01-24 Thread Andrew Milner
03:38:08 UTC+1 schrieb Andrew Milner: >> >> It may help us if you told us what exactly you are trying to do. To copy >> data from one database to another - which would be the result of reading >> data from a MySQL-db does not require a weewx driver. If the data is >>

[weewx-user] Re: only database driver

2017-01-23 Thread Andrew Milner
It may help us if you told us what exactly you are trying to do. To copy data from one database to another - which would be the result of reading data from a MySQL-db does not require a weewx driver. If the data is already in a db you should not need to parse the data. Are you, for example,

[weewx-user] Re: Weather Underground dismissing barometer corrections

2017-01-25 Thread Andrew Milner
You can probably get 'odd' things happening if the station emits partial packets - depending on whether software or hardware is set as being preferred or specified. If set for hardware preferred, but it is missing, weewx will supply a value (but ignore correction) - but if present it will use

Re: [weewx-user] Re: engine: Unable to load driver: (5, 'Input/output error')

2017-01-30 Thread Andrew Milner
Can you be more specific? How frequently are the archive records being saved? Ids the issue with the creation of the html pages, the .png image files, the ftp of the data to a remote site, or in the browser viewing the html/png files?? what exactly hap[pens every hour, and/or every 5

[weewx-user] Re: Is it possible to add a means to offset the hardware temperature by different values between sunrise and sunset, and sunset and sunrise based on the wx station latitude and longitude?

2017-01-25 Thread Andrew Milner
ause of the radiated heat from the flat roof. It got much better > when I moved it to the current location. > > There is a picture of the installation here at: > http://weather.gladstonefamily.net/site/AV175 > > Thanks, > > Mike > > > On Tuesday, January 24, 2017 a

[weewx-user] Re: wee_import from Cumulus

2017-01-27 Thread Andrew Milner
I suspect the format should be either 2010-21-01 from looking at the csv example in the weewx documentation - or - 21-01-2010. I'd wait for an expert to reply though!! On Friday, 27 January 2017 13:49:50 UTC+2, Thomas Olausson wrote: > > Hi, > > I'm trying to import old archve data from

[weewx-user] Re: wee_import from Cumulus

2017-01-27 Thread Andrew Milner
Have you tried setting raw_datetimeformat in the conf file to match what you have?? The default is %Y-%m-%d and you need %d-%m-%y On Friday, 27 January 2017 14:46:55 UTC+2, Andrew Milner wrote: > I suspect the format should be either 2010-21-01 from looking at the csv > example in the

[weewx-user] Re: wee_import from Cumulus

2017-01-27 Thread Andrew Milner
Gary One thing I noticed when looking at the cumulus file was that the decimal separator seemed to be ',' rather than '.', as well as the '-' instead of '/'. Perhaps there should be formatting options in the cumulus file for dates like the csv - and what about the numeric decimal formats -

[weewx-user] Re: wee_import from Cumulus

2017-01-27 Thread Andrew Milner
y, 27 January 2017 23:49:43 UTC+10, Andrew Milner wrote: >> >> Gary >> One thing I noticed when looking at the cumulus file was that the decimal >> separator seemed to be ',' rather than '.', as well as the '-' instead of >> '/'. Perhaps there should be formatting

Re: [weewx-user] Re: FTP upload period

2017-01-29 Thread Andrew Milner
Being the usual pedantic soul that I am ... so Tom's 'not true' which implied my post on archive intervals was not true is also not strictly true. The FTP report timing IS based on the archive timing, but may be DEFERRED to run LESS frequently by setting a report_timing option if so desired.

[weewx-user] Re: Adding SOC (state of charge) reading for my Particle Photon based weather station

2017-01-28 Thread Andrew Milner
Can you provide copies of 1. Existing (old) weewx.conf 2. New (Modified) weewx.conf (with change to bindings) 3. Modification made to fileparse.py (to extend the schema) On Sunday, 29 January 2017 04:56:22 UTC+2, Robert Mantel wrote: > Ok, so there is no soc.py because I thought that extending

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

2017-02-22 Thread Andrew Milner
1. Weewx appeared to install correctly 2. Weewx started to run as a daemon as expected 3. Weewx attempted to read records from your wmr300 station - but I do not understand the from n/a message Your log that you show on the video does not begin at the start of weewx - the log for 5 minutes

[weewx-user] Re: Realtime Gauge-Data Extension 0.2.2 'gauge-data.txt' Issues

2017-02-20 Thread Andrew Milner
gt; where high wind speeds often cause significant property damage and even > loss of life. > > 2) Rapidly changing gauges quickly demonstrate to website visitors that > they are in fact watching near-real-time data. > > Bob > > On Monday, February 20, 2017 at 10:23

[weewx-user] Re: Realtime Gauge-Data Extension 0.2.2 'gauge-data.txt' Issues

2017-02-20 Thread Andrew Milner
I would prefer to ask the questions - why am I providing 3 second updates? What practical value do 3 second updates have for most users?? What is the point?? On Monday, 20 February 2017 19:33:27 UTC+2, tempus wrote: > This is merely a suggestion for consideration. > > Space characters are

[weewx-user] Re: WH1080 larger funnel at the rain sensor

2017-02-18 Thread Andrew Milner
How much bigger are the actual tipper buckets though?? On Saturday, 18 February 2017 12:01:43 UTC+2, Geni wrote: > > The rain sensor on the WH1080 has got a new bigger heated funnel for the > rain sensor. > The area is 3.655 times bigger than the original, where and how do I enter > this in

[weewx-user] Re: WH1080 larger funnel at the rain sensor

2017-02-18 Thread Andrew Milner
So since the rain gauge just outputs a tip count, and one tip corresponds to .3mm or .01" when used with the standard funnel, if the collection area is 3.655 times greater isn't it just a question of using the calibrate section of weewx.conf to say rain = rain / 3.655?? On Saturday, 18

Re: [weewx-user] Improved BatteryStatus plot

2017-02-23 Thread Andrew Milner
What does your database contain in the outTempBatteryStatus field? If it contains varying values then you just need to add the plots of outTempBatteryStatus to your skin to get your graph. On Thursday, 23 February 2017 21:21:18 UTC+2, Jerry Simonowits wrote: > > Thanks much. All of the code I

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

2017-02-21 Thread Andrew Milner
21 09:26:11 raspberrypi weewx[3216]: wmr300: read failed: max retries > (5) exceeded > Feb 21 09:26:11 raspberrypi weewx[3216]: wmr300: Release interface failed: > could not release intf 0: Invalid argument > Feb 21 09:26:11 raspberrypi weewx[3216]: engine: Caught WeeWxIOError: read &g

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

2017-02-20 Thread Andrew Milner
rrypi dhcpcd[443]: wlan0: fe80::222:7ff:fe4a:ebca > router available > Feb 21 07:39:40 raspberrypi dhcpcd[443]: wlan0: DHCPv6 REPLY: No Addresses > Available > Feb 21 07:41:40 raspberrypi dhcpcd[443]: wlan0: DHCPv6 REPLY: No Addresses > Available > Feb 21 07:41:40 raspberrypi rsyslo

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

2017-02-21 Thread Andrew Milner
22:7ff:fe4a:ebca > router available > Feb 21 08:23:20 raspberrypi rsyslogd-2007: action 'action 17' suspended, > next retry is Tue Feb 21 08:24:50 2017 [try http://www.rsyslog.com/e/2007 > ] > Feb 21 08:23:25 raspberrypi dhcpcd[443]: wlan0: fe80::222:7ff:fe4a:ebca > router av

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

2017-02-20 Thread Andrew Milner
Have you connected the weather station to the Pi?? The log is saying that weewx cannot find the weather station plugged into the USB. If you want to run weewx without a weather station connected to the RPi you must select 'simulator' as the station type. If you select a station type of WMR300

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

2017-02-20 Thread Andrew Milner
) > IOError: Config file not found: "/home/pi/weewx.conf". > pi@raspberrypi:~ $ > > > > > > > 2017-02-21 7:46 GMT+01:00 Andrew Milner <andrew.s...@gmail.com > >: > >> Have you connected the weather station to the Pi?? The log is saying &

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

2017-02-20 Thread Andrew Milner
or to run directly, not as a daemon, try sudo weewxd /etc/weewx/weewx.conf On Tuesday, 21 February 2017 08:54:41 UTC+2, Andrew Milner wrote: > 1. what were you trying to do with the command which you posted? > 2. how did you install weewx? If you used the deb install th

[weewx-user] Re: Reference values for calibration

2017-02-14 Thread Andrew Milner
D|o make sure that you are, as matthew said, comparing apples with apples. What is the time interval in use on the weather smart system, and what is the archive interval in the console itself? I still do not see how you managed to obtain records for the same time period into two different

[weewx-user] Re: getting openweathermap station_id

2017-02-11 Thread Andrew Milner
https://www.openweathermap.org/stations Step 2 On Sunday, 12 February 2017 08:09:56 UTC+2, Paolo Benvenuto wrote: > Hi! I registered on openweathermap, I got a key, but I cannot realize how > can I get a station_id in order to put it in weewx.con as explained in >

[weewx-user] Re: getting openweathermap station_id

2017-02-12 Thread Andrew Milner
in the following examples: api.openweathermap.org/data/2.5/weather?id=524901= <http://api.openweathermap.org/data/2.5/forecast/city?id=524901=11> ** On Sunday, 12 February 2017 13:06:51 UTC+2, Paolo Benvenuto wrote: > Il giorno domenica 12 febbraio 2017 07:23:56 UTC+1, Andrew

Re: [weewx-user] New User, New Install, no run

2017-02-12 Thread Andrew Milner
http://weewx.com/docs/hardware.htm#driver_status On Sunday, 12 February 2017 20:25:12 UTC+2, ge...@embarqmail.com wrote: > Thanks.. off and running setup > > what driver do I need for Davis ? > > > On Sunday, February 12, 2017 at 10:05:23 AM UTC-8, Tom Keffer wrote: >> >> Did you install the

Re: [weewx-user] Re: Formula for barometric pressure

2017-02-14 Thread Andrew Milner
Both should work On Tuesday, 14 February 2017 18:27:57 UTC+2, wysiwyg wrote: > Hello ! > > I just discovered this nice SQL command suggested in this discussion: > > *UPDATE archive SET barometer=barometer+xxx WHERE dateTime < YYY;* > > I'm interested in this to correct an other parameter with

[weewx-user] Re: Sometime no graph rendering

2017-02-15 Thread Andrew Milner
Please provide more details on exactly what did not work, at what time(s). The log appears to show the images (graphs) being generated correctly. Did you try and force a refresh of the relevant page(s) in your web browser? I find I quite often have to hit the 'reload' button to make sure

[weewx-user] Re: Name of "day of week"

2017-02-17 Thread Andrew Milner
what format are you actually using?? I think that %a and %A should be capitalised by default when used in strftime strings. On Friday, 17 February 2017 13:15:33 UTC+2, Ruben Navarro Huedo wrote: > > Hello: > > I have been reading customization guide but i don't find how i could do > this. > >

Re: [weewx-user] Re: Error charts update

2017-01-18 Thread Andrew Milner
I suspect the images are being generated into the wrong directory. Can you either post your weewx.conf or the output from running wee_debug On Wednesday, 18 January 2017 14:59:46 UTC+2, gjr80 wrote: > > Perhaps there is a language barrier but when I first read this thread this > morning I

Re: [weewx-user] Re: engine: Unable to load driver: (5, 'Input/output error')

2017-01-19 Thread Andrew Milner
See 'running weewx' in the user guide. On Thursday, 19 January 2017 14:52:42 UTC+2, Kevin Bosworth wrote: > How do I run it normally and not as a daemon? > > Kevin > > Sent from Yahoo Mail on Android > > On Thu, Jan 19, 2017 at 4:40 AM, Thomas Keffer > wrote: > Things to

[weewx-user] Re: Error charts update

2017-01-19 Thread Andrew Milner
If you brouse to /var/www/html/weewx/index.html on your local machine do you see the correct page AND correct images?? If you browse to /etc/weewx/public_html/index.html on your local machine do you see the correct page and correct images?? Can you give the output from ls -l *.png in

[weewx-user] Re: Error charts update

2017-01-17 Thread Andrew Milner
If you are asking for some help providing more details of the issues will be required!! What specific problems do you have with the charts?? If the issues are just with some of the charts then the output from wee_debug and the log from startup of weewx until after two or three

[weewx-user] Re: Error charts update

2017-01-17 Thread Andrew Milner
Since the log clearly shows an error is being detected by cheetah posting the output from wee_debug would help as you have something incorrect in either weewx.conf or skin.conf On Tuesday, 17 January 2017 20:04:01 UTC+2, alean...@hotmail.com wrote: > >

[weewx-user] Re: Pi users: your additional software for Raspberry Pi3?

2017-01-16 Thread Andrew Milner
Install an RTC, lighttpd, phpmyadmin, SQLite or MySQL, samba, php, logrotate, - that's about it I think. On Tuesday, 17 January 2017 05:10:16 UTC+2, Marc Aubry wrote: > > Hi, > on all my headless rpi, I do install vncserver and Screen for ease of > remote acess. > > On Monday, January 16, 2017

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

2017-01-16 Thread Andrew Milner
at the wrong log for the current situation!! On Tuesday, 17 January 2017 06:33:46 UTC+2, Marc Aubry wrote: > Yes i did. > Wait and see > So far so good > thanks > > > On Tuesday, January 17, 2017 at 10:38:36 AM UTC+7, Andrew Milner wrote: >> >> Yes, that's what I was

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

2017-01-17 Thread Andrew Milner
. so maybe i > forgot to restart weewx after the modif. > sorry about that. > for now the system is running since last reboot and i wont change the > genrator tonight to check if it has any influence. > > thanks for your help. > > > > On Tuesday, January 17, 201

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

2017-01-17 Thread Andrew Milner
screen and vncserver. > the power supply is a branded 3A USB power supply and i did try with other > power supply. > i did change the file /home/weewx/user/forrecat.py nd the /etc/ > i did change the /etc/rsyslog.conf as suggested > > > > > On Tuesday, January 1

[weewx-user] Re: Error charts update

2017-01-18 Thread Andrew Milner
f you have permission problems when moving or copying files use sudo in front of the command - for examplesudo mv filea fileb instead of mv filea fileb On Wednesday, 18 January 2017 16:28:22 UTC+2, alean...@hotmail.com wrote: > > > > Thanks to all for the support. Could anyone to explain me

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

2017-01-17 Thread Andrew Milner
t's is not a clean solution but it should work. > I would prefer to find a cleanest way to do it. > > Thanks again for your help. > > > > > On Wednesday, January 18, 2017 at 12:20:09 AM UTC+7, Andrew Milner wrote: >> >> . or the cables or the physical

[weewx-user] Re: Hints on creating coldest/warmest day/night all-time stats?

2017-01-16 Thread Andrew Milner
My initial reaction is that this would become an incredibly time consuming calculation without having a additional daily night and day tables holding max and min like the existing daily tables, and have an associated service updating them. Thinking aloud perhaps the same can be achieved by

[weewx-user] Re: centering forecast data

2016-08-20 Thread Andrew Milner
I'd start by having a look at what is inside forecast_table.inc and then see if you can achieve the desired effect by 'tweaking' the css definitions of the styles used. I am guessing that in the css file h1 is defined as being centred - which is why they work ok. On Saturday, 20 August 2016

[weewx-user] Re: centering forecast data

2016-08-20 Thread Andrew Milner
Perhaps you could attach the revised version of the snippet after your editing in case you have mis-edited or mis-positioned the changes in some way, which would make it easier to relate what you say happens with the actual template code which is being executed. On Sunday, 21 August 2016

[weewx-user] Re: tfa nexus raspi record correlation

2016-08-21 Thread Andrew Milner
See http://weewx.com/docs/usersguide.htm#StdWXCalculate from the user manual. On Sunday, 21 August 2016 11:31:30 UTC+3, GBW wrote: > hallo, > > As beginner, I am running weewx on a raspi 3 (setup.py) connected to a > german TFA Nexus (TE923 clone). Weewx is running fine apart from ocassional

[weewx-user] Re: WMR300: windchill/heatindex

2017-02-27 Thread Andrew Milner
If you have said windchill and/or heat index are hardware generated then: a) According to WMR300 manual the wmr300 only calculates (and so only provides) heat index when temp is > 80F and humidity > 40% b) I do not know how/when windchill is calculated by wmr300 - manual says it is based on

[weewx-user] Re: WMR300: windchill/heatindex

2017-02-27 Thread Andrew Milner
It is of course quite right and proper that there is not always a heat index or windchill value - and in fact you can never have both available! On Monday, 27 February 2017 14:10:30 UTC+2, Andrew Milner wrote: > If you have said windchill and/or heat index are hardware genera

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

2017-02-26 Thread Andrew Milner
so it is working fine again On Sunday, 26 February 2017 18:33:43 UTC+2, Torbjørn Aasen wrote: > traHeatindex3': None, 'extraHeatindex2': None, 'extraHeatindex1': None, > 'extraHeatindex7': None, 'extraHeatindex6': None, 'extraHeatindex5': None, > 'extraHeatindex4': None, 'interval':

[weewx-user] Re: sqlite to mySql problem

2017-02-28 Thread Andrew Milner
weewx pre-requisites says what is needed - when using setup.py at least. http://weewx.com/docs/setup.htm On Tuesday, 28 February 2017 14:12:40 UTC+2, Eric Gammeter wrote: > OK- sounds good on your station setup. I've been tinkering with my Rpi > for some time now and finally decided to use

[weewx-user] Re: WMR300: windchill/heatindex

2017-02-27 Thread Andrew Milner
Does the wm300 show values for windchill and heat index? weewx software generated values require temp < 50F and wind > 5mph for windchill and >80F and humidity > 40% for heatindex otherwise will default to the same as outdoor temperature. On Sunday, 26 February 2017 22:01:41 UTC+2, Miguel

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

2017-02-27 Thread Andrew Milner
; > It's a little more fun now that something seems to work > > > [image: Innebygd bilde 1] > [image: Innebygd bilde 2] > > 2017-02-26 17:54 GMT+01:00 Andrew Milner <andrew.s...@gmail.com > >: > >> so it is working fine again >> >> >

[weewx-user] Re: Backfill from WU

2016-08-31 Thread Andrew Milner
or the wrong version of wee_import or something? was trying to import from wunder with the command: sudo ./wee_import --wunder --calc-missing --dry-run --station=ILIMASSO5 --date=2013-02-01 On Wednesday, 31 August 2016 11:50:20 UTC+3, Andrew Milner wrote: > Well I never knew that!!! I use the

Re: [weewx-user] Weewex on Debian 8.5.0 install failure problem error QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.

2016-09-02 Thread Andrew Milner
Stop weewx running. Do you still get the message?? If you do then clearly this has nothing to do with weewx - and the best way of debugging the issue will then be to forget about weewx until you have solved the basic Ubuntu installation!!! Disable the startup daemon so weewx won't start when

[weewx-user] Re: no barometer

2016-09-02 Thread Andrew Milner
have you tried, in wxcalculate section, setting pressure = prefer hardware . or hardware altimeter = prefer hardware .or software barometer = prefer hardware ..or software does not look right to have all three set to software, since at least one of them should

[weewx-user] Re: no barometer

2016-09-05 Thread Andrew Milner
id-Weatherboard for UV, InfraRed and radiation. > This board has also presure, altitude, humidity and temp sensors. > Hoogtemeter (altitude) is data from the Odroid-Weatherboard. > > From 16.00 hour I started with the weatherboard. after I changed the > weewx.conf file. >

Re: [weewx-user] Bad data was Backfill from WU

2016-09-06 Thread Andrew Milner
I found similar things Liz when I imported 2yrs of data from WU - and found that many of the negative values were a result of either -- or values in the WU data. I initially did a quick QC by looking for negative winds, humidity and barometer, humidity > 100, barometer > 1300, barometer <

Re: [weewx-user] BASIC question regarding config file

2016-09-07 Thread Andrew Milner
Or you can force a .conf reload with a hup " You can tell a running instance of weewx to reread its configuration file by sending it the HUP signal. First run ps to find out the Process ID (PID) number of the instance, then send it the HUP signal: ps -a # Note the PID of the

[weewx-user] Re: Backfill from WU

2016-08-31 Thread Andrew Milner
Gary A couple of questions - a) where/how are the WU API key and station ID specified when retrieving history data from WU? b) Is it possible to specify start and stop dates and times for the importing from WU via wee_import? Andrew On Wednesday, 31 August 2016 07:32:30 UTC+3, gjr80 wrote:

[weewx-user] Re: Backfill from WU

2016-08-31 Thread Andrew Milner
Well I never knew that!!! I use the api to get temperatures for another project - and I guess the only difference is in the format of the returned data!! On Wednesday, 31 August 2016 11:29:17 UTC+3, gjr80 wrote: > >> a) where/how are the WU API key and station ID specified when retrieving

[weewx-user] Backfill from WU

2016-08-30 Thread Andrew Milner
Is there a utility that will backfill the weewx database (preferably MySQL) using data retrieved from WU via the WU API - or does anyone have a recommended approach to achieve this and also generate the derived columns? -- You received this message because you are subscribed to the Google

[weewx-user] Re: Download skins

2016-09-12 Thread Andrew Milner
check the wiki On Monday, 12 September 2016 13:22:01 UTC+3, zkab wrote: > Some people have very cool skins in the examples of weewx documentation. > Is there away to download skins or do I have to contact the person who > made them ? > If I have to contact them, due to copyright issues, how

Re: [weewx-user] Weewx on Pib

2016-09-12 Thread Andrew Milner
The Fine Offset default archive interval is, I think, 30 minutes. If you have changed nothing and have told weewx to use hardware records then the updates will be every 30 minutes. You can change the interval by using wee-util - most people set to 5 minutes I think (300 seconds). You should

[weewx-user] Re: Wunderground Updating

2016-09-12 Thread Andrew Milner
Andy - first of all you need to separate in your mind the database and the outputs from weewx. You have specified a database in US units, so data will be stored in the database in US units - regardless of how it is output to either webpages, wunderground or anywhere else!! Since the database

[weewx-user] Re: Fine Offset lockup ... another way of looking at it

2016-09-12 Thread Andrew Milner
Rebooting the Pi won't solve all FO1080 lockups though! What kind of things go 'awry' on your RPi - I've not had (touch wood) any weewx RPi issues in a few years, and usually only get one FO usb lockup a year - which usually necessitates completely resetting the FO1080 - removal of batteries

[weewx-user] Re: End of my Tether

2016-09-09 Thread Andrew Milner
Looks to me as though the system is still getting started long after it tried to run weewx and failed to start the driver. Have you tried starting the system and then starting weewx off the command line rather than as a daemon? If that works then you need to fiddle around with the start up

[weewx-user] Re: FO USB

2016-09-23 Thread Andrew Milner
If you are trying to solve FO lockups by reading the external sensors directly via a radio receiver of some kind, where do you get the pressure from?? This comes from the FO console on a FO station, and not from the external sensors. On Saturday, 24 September 2016 05:26:25 UTC+3,

Re: [weewx-user] WU update issue

2016-10-05 Thread Andrew Milner
5 minute archive usually works just fine. On Wednesday, 5 October 2016 19:55:02 UTC+3, Double J Entertainment wrote: > Okay when I get home from work I am gonna turn off rapid updates and then > configure the archival times down if needed but I will do the adjustments > slowly to find a good

Re: [weewx-user] WU update issue

2016-10-05 Thread Andrew Milner
I thought WU prefer either rapid fire, or archive interval, but not both. Maybe the problem is being caused by WU receiving both streams. Certainly I have never seen the issue you have, but then again I stopped using rapid fire as it seemed a bit pointless (to me anyway). On Wednesday, 5

[weewx-user] Re: Don't seem to get Weewx to connect to MQTT Broker

2016-10-04 Thread Andrew Milner
Be patiend and wait - fousb will take up to 5 minutes to synchronise with the weather station. From the snippet you posted you did not wait long enough!! Have you set the station archive interval to 5 minutes, and done the pother things recommended in the user guide \(periodic update, polling

[weewx-user] Re: Airfield Weather Station - Raspberry Pi to weewx to Weather Underground - failing

2016-10-04 Thread Andrew Milner
Garrick - what do you fly - 3axis or flexi? If the former you may find me dropping in to Kent when next in UK - I let my licence lapse as there is no microlighting here in cyprus Andrew On Tuesday, 4 October 2016 09:40:47 UTC+3, Garrick Cruise-Smith wrote: > All / Vince, > > Must be

Re: [weewx-user] Re: Version 3.6.0 hits the streets

2016-10-08 Thread Andrew Milner
screen window this becomes much easier to read and has, per period one line for all records, with last timestamp date and time AND TIMEZONE AND EPOCH TIME Not sure who 'loses' the timezone and epoch time in the small window . Andrew On Saturday, 8 October 2016 09:3ranche 6:59 UTC+3, Andrew

Re: [weewx-user] Re: Version 3.6.0 hits the streets

2016-10-08 Thread Andrew Milner
Square brackets perhaps?? For some reason the round brackets looks as though they should be included (to sill me at least)!! This may be helpful . http://pcsupport.about.com/od/commandlinereference/a/command-syntax.htm no doubt there is a definition for python somewhere too On

Re: [weewx-user] Re: Version 3.6.0 hits the streets

2016-10-07 Thread Andrew Milner
/bin/weeimport/weeimport.py aside by renaming >it to something like weeimport_orig.py >- copy the attached weeimport.py in its place >- run wee_import >- let us know the outcome > > Gary > > On Saturday, 8 October 2016 13:16:30 UTC+10, Andrew Milner wrote: &g

[weewx-user] Re: Version 3.6.0 hits the streets

2016-10-07 Thread Andrew Milner
. not quite perfect .. Just upgraded, and thought I would correct some errors from a previous import by using wee_import from WU with full qc checking - as available in the now standard wee_import. Created a wuimport.conf, and modified the qc section of weewx.conf went to do the import

[weewx-user] Re: Version 3.6.0 hits the streets

2016-10-07 Thread Andrew Milner
. not quite perfect .. Just upgraded, and thought I would correct some errors from a previous import by using wee_import from WU with full qc checking - as available in the now standard wee_import. Created a wuimport.conf, and modified the qc section of weewx.conf The --dry-run

Re: [weewx-user] WMR300: Wrong wind direction

2016-09-21 Thread Andrew Milner
ause of the wrong directions? > > Cheers. > > On Tuesday, September 20, 2016 at 8:47:27 AM UTC+2, Andrew Milner wrote: >> >> I think you are going to have to run with debug=1 and see what data is in >> the LOOP and REC records. Is the REC coming from the station, or being

[weewx-user] Re: Battery status

2016-09-15 Thread Andrew Milner
what do you have in the examples directory then? On Thursday, 15 September 2016 13:04:39 UTC+3, zkab wrote: > I have Davis Vantage VUE. > According to the documentation for Vantage VUE ISS it should generate > battery status. > Weewx was installed as .deb > How can I include it on my web ? >

Re: [weewx-user] Re: Date/Time Format Change

2016-09-16 Thread Andrew Milner
bottom_label_format within the images section of weewx.conf On Saturday, 17 September 2016 05:48:59 UTC+3, George Alexander wrote: > ahhh so close... > > http://203.114.173.126:180/weewx/simple/index.html > > For some reason that I have yet to work out, the dates/times on the right > under

Re: [weewx-user] WMR300: Wrong wind direction

2016-09-20 Thread Andrew Milner
I think you are going to have to run with debug=1 and see what data is in the LOOP and REC records. Is the REC coming from the station, or being generated by weewx software? As far as I can see from a quick look through weewx code it sure seems as though Tom is handling wind\Dir correctly as

[weewx-user] Re: Week no

2016-09-20 Thread Andrew Milner
Format dateTime as %U or %W depending on whether Sunday or Monday is the first day of the week. eg current.dateTime.format("%U") see https://docs.python.org/3/library/datetime.html#strftime-strptime-behavior for full formatting options On Tuesday, 20 September 2016 11:53:46 UTC+3, zkab

Re: [weewx-user] WMR300: Wrong wind direction

2016-09-19 Thread Andrew Milner
Tom, the standard skin seems to have an aggregate_type = none in the image section header which covers the day plot and aggregate_type = avg for the week images header - which clearly wont work for the winddir for reasons you gave. I am baffled in that the original plot appeared to be a day

Re: [weewx-user] Clearing rain totals on Envoy

2016-09-23 Thread Andrew Milner
Have you tried setting /resetting the rain year start date? if you clear the memory with --clear, then set rain start to say 10 then set it back to whatever date you really want to be the start may possibly make the rain total reset - just a thought! On Friday, 23 September 2016 07:33:56

[weewx-user] Re: Week no

2016-09-23 Thread Andrew Milner
You have, I think, misunderstood Tom - you do not need to create a service or anything so complex!! All you need to do is put his import statement INTO THE TEMPLATE for the page YOU WANT TO DISPLAY the version in, and then use the tag for the data to be displayed. I just tried it, and it

[weewx-user] Re: Touch screen for Raspberry Pi / Best display for WeeWX?

2016-09-23 Thread Andrew Milner
There is the official RPi touch screen display available You can reduce the content of the standard webpages by using the mobile ones - they work pretty well - or customise the mobile ones to your own likings perhaps and have the wife use her phone instead of the console! The outdoor sensors

  1   2   3   4   5   6   7   8   9   10   >