Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

[Andrew Milner]

That's why I suggested just changing the version in weewx.conf and trying 
to 'fool' WU to see if it is something in THEIR validation procedures - as 
the weewx version is part of the rapid fire upload.. just a thought 
.


On Tuesday, 6 December 2016 20:41:36 UTC+2, Marty Thompson wrote:

> Thanks mate
> I did a reinstall is on 3.5.0 now
> But might downgrade back to wheezy on the RPI as well
> But Thomas said its transmits the correct URL
> The bit that stumps me is they both did it after a upgrade
> Cheers
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

[Marty Thompson]

Thanks mate
I did a reinstall is on 3.5.0 now
But might downgrade back to wheezy on the RPI as well
But Thomas said its transmits the correct URL
The bit that stumps me is they both did it after a upgrade
Cheers

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

[Andrew Milner]

Out of curiosity - change weewx.conf to give the earlier version of weewx - 
so that WU think you are using an earlier version - and see what 
happens!!!



On Tuesday, 6 December 2016 20:08:17 UTC+2, Marty Thompson wrote:

> Yea only diff is. 
> Weeazy. And 3.5.0
> Jessie 3.6.2
>
> Just waiting to see what wu says
> Cheers again for the help
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

[Marty Thompson]

Yea only diff is.
Weeazy. And 3.5.0
Jessie 3.6.2

Just waiting to see what wu says
Cheers again for the help

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

[Thomas Keffer]

Just to clarify: the log that you posted on pastebin, included log_success
and log_failure being set to True? I'm not seeing any evidence of that.

-tk

On Mon, Dec 5, 2016 at 4:20 PM, Marty Thompson  wrote:

> thanks mate
> heres the section form weewx  looks ok
>
>
> [[Wunderground]]
> # This section is for configuring posts to the Weather Underground.
>
> # If you wish to do this, set the option 'enable' to true,
> # and specify a station (e.g., 'KORHOODR3') and password.
> enable = true
> station = IQLDAYR2
> password = xxx
>
> # Set the following to True to have weewx use the WU "Rapidfire"
> # protocol. Not all hardware can support it. See the User's Guide.
> rapidfire = True
> log_success = True
> log_failure = True
>
>
>
>
>
> *Martin Thompson*
>
> *Po Box 1415*
> *AYR   QLD4807*
>
> *M. 0466 005866*
> *E.  ma...@martymandy.com
> *
> *W. **martymandy.com* 
>
> Check the weather at my place martymandy.com
>
>
> On Tue, Dec 6, 2016 at 10:11 AM, Thomas Keffer  wrote:
>
>> Hmmm, this looks like a log with debug=2, but I don't see any evidence
>> that log_success and log_failure have been set to True.
>>
>> -tk
>>
>> On Mon, Dec 5, 2016 at 3:59 PM, Marty Thompson 
>> wrote:
>>
>>> sorry mate been on the grave yard shift
>>>
>>> heres the syslog
>>> http://pastebin.com/TS2uwS2h
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to weewx-user+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>
>> --
>> You received this message because you are subscribed to a topic in the
>> Google Groups "weewx-user" group.
>> To unsubscribe from this topic, visit https://groups.google.com/d/to
>> pic/weewx-user/2q8WyexIblQ/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> weewx-user+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>>
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

[Marty Thompson]

thanks mate
heres the section form weewx  looks ok


[[Wunderground]]
# This section is for configuring posts to the Weather Underground.

# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
enable = true
station = IQLDAYR2
password = xxx

# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = True
log_success = True
log_failure = True





*Martin Thompson*

*Po Box 1415*
*AYR   QLD4807*

*M. 0466 005866*
*E.  ma...@martymandy.com
*
*W. **martymandy.com* 

Check the weather at my place martymandy.com


On Tue, Dec 6, 2016 at 10:11 AM, Thomas Keffer  wrote:

> Hmmm, this looks like a log with debug=2, but I don't see any evidence
> that log_success and log_failure have been set to True.
>
> -tk
>
> On Mon, Dec 5, 2016 at 3:59 PM, Marty Thompson 
> wrote:
>
>> sorry mate been on the grave yard shift
>>
>> heres the syslog
>> http://pastebin.com/TS2uwS2h
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>>
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit https://groups.google.com/d/
> topic/weewx-user/2q8WyexIblQ/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

[Thomas Keffer]

Hmmm, this looks like a log with debug=2, but I don't see any evidence that
log_success and log_failure have been set to True.

-tk

On Mon, Dec 5, 2016 at 3:59 PM, Marty Thompson  wrote:

> sorry mate been on the grave yard shift
>
> heres the syslog
> http://pastebin.com/TS2uwS2h
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

[Marty Thompson]

Have fired of a email to weather underground. Wsit to See what happens?

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

[Marty Thompson]

thanks did that got the success
and added the logs to WU

Just a thought out loud
is there a way via apt-get to downgraded to test 3.5.0 to prove its weather
undergroud

Got me stumped

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

[Thomas Keffer]

The log looks fine.

Two more things to try.

1. Using a web browser, try posting directly to the RF server. That is,
take one of the URLs in the log, replace XXX with your WU password, then
put it in a browser and hit enter. After a second or two, the server should
respond with 'success'. If this is not working, then there is definitely
something wrong with the WU server. You can use the following URL, or any
of the others in your log.

http://rtupdate.wunderground.com/weatherstation/updateweatherstation.php?action=updateraw=IQLDAYR2=XXX=weewx-3.6.2=8.0=062=0.00=082=86.8=7.0=2.5=0.00=30.006=72.2=2016-12-03%2023%3A25%3A20=1

​2. Add the options log_success and log_failure to your [[Wunderground]]
section. So, now they read something like:

​  [[Wunderground]]
# This section is for configuring posts to the Weather Underground.

# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
enable = true
station  = IQLDAYR2
password = XXX

# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = True
log_success = True
log_failure = True

-tk



On Sat, Dec 3, 2016 at 5:34 PM, Marty Thompson  wrote:

> Thanks Garry
> If you look nth of Townsville at Ingham I save set up ,14 stations
> All with RPI and rf on
> Running 3.5.0
> The station up at sunnybank complained his rf wasn't working
> So I did a update of the pi to 3.6.2
> And the RPI update as well
> When I noticed it with mine
> So fresh install caused the issue on mine as well
>
> Sunnybank with issue. ://www.wunderground.com
> /personal-weather-station/dashboard?ID=IQUEENSL1211#history
>
> Same setup except 3.5.0
>
> ://www.wunderground.com/personal-weather-station/dashboard?ID=IINGHAM3
>
> Also the versions 3.5.0 were set up on the old wget deb docs
> 3.6.2 with issues set up on the new apt-get way
> Sorry for typos. On phone
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

[Marty Thompson]

Thanks Garry
If you look nth of Townsville at Ingham I save set up ,14 stations
All with RPI and rf on
Running 3.5.0
The station up at sunnybank complained his rf wasn't working
So I did a update of the pi to 3.6.2
And the RPI update as well
When I noticed it with mine
So fresh install caused the issue on mine as well

Sunnybank with issue. ://www.wunderground.com/personal-weather-station/
dashboard?ID=IQUEENSL1211#history

Same setup except 3.5.0

://www.wunderground.com/personal-weather-station/dashboard?ID=IINGHAM3

Also the versions 3.5.0 were set up on the old wget deb docs
3.6.2 with issues set up on the new apt-get way
Sorry for typos. On phone

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

[Marty Thompson]

No proxy. Was internet out for ,5mins
Had the pi for 18 months

I'll set debug tommorow and post syslog

Thanks again for the help

On 4 Dec. 2016 1:52 am, "Thomas Keffer"  wrote:

BTW, you didn't say whether you are running a proxy server.

-tk

Fat-fingered from my Android

On Dec 3, 2016 6:00 AM, "Thomas Keffer"  wrote:

> One more thing to try: set debug=2 in weewx.conf. This will log the URL
>  used to contact the WU.
>
> I will be on the road today, so I may not be able to get back to you for a
> bit.
>
> -tk
>
> On Fri, Dec 2, 2016 at 8:42 PM, Marty Thompson 
> wrote:
>
>> ok installed latest jessie lite  25-11-2016  version
>>>
>> changed time
>> apt-get update
>> apt-get upgrade
>> apt-get dist-upgrade
>> rpi-update
>>
>> install weewx via new apt-get method
>>
>>
>>
>> run and heres the syslogs
>>
>> http://pastebin.com/wA50JmAi
>>
>> got me stumped   Can setup remote access if needes
>> and the debug
>>
>> pi@raspberrypi:~ $ wee_debug --info
>> Using verbosity=1, displaying most info
>>
>> wee_debug output will be sent to stdout(console)
>>
>> Using configuration file /etc/weewx/weewx.conf
>> Using database binding 'wx_binding', which is bound to database
>> 'archive_sqlite'
>>
>> System info
>>   CPU implementer:0x41
>>   Features:   half thumb fastmult vfp edsp java tls
>>   CPU architecture:   7
>>   BogoMIPS:   697.95
>>   Hardware:   BCM2708
>>   CPU revision:   7
>>   CPU part:   0xb76
>>   model name: ARMv6-compatible processor rev 7 (v6l)
>>   Serial: 6d665b92
>>   processor:  0
>>   CPU variant:0x0
>>   Revision:   0003
>>
>>   Operating system:   debian 8.0
>>   Linux raspberrypi 4.4.36+ #933 Fri Dec 2
>> 21:57:25 GMT 2016 armv6l
>>   1 minute load average:  0.12
>>   5 minute load average:  0.21
>>   15 minute load average: 0.52
>>
>> General weewx info
>>   Weewx version 3.6.2 detected.
>>
>> Station info
>>   Station type: Vantage
>>   Driver:   weewx.drivers.vantage
>>
>> Driver info
>> [Vantage]
>> # This section is for the Davis Vantage series of weather stations.
>>
>> # Connection type: serial or ethernet
>> #  serial (the classic VantagePro)
>> #  ethernet (the WeatherLinkIP)
>> type = serial
>>
>> # If the connection type is serial, a port must be specified:
>> #   Debian, Ubuntu, Redhat, Fedora, and SuSE:
>> # /dev/ttyUSB0 is a common USB port name
>> # /dev/ttyS0   is a common serial port name
>> #   BSD:
>> # /dev/cuaU0   is a common serial port name
>> port = /dev/ttyUSB0
>>
>> # If the connection type is ethernet, an IP Address/hostname is
>> required:
>> host = 1.2.3.4
>>
>> ##
>> # The rest of this section rarely needs any attention.
>> # You can safely leave it "as is."
>> ##
>>
>> # Serial baud rate (usually 19200)
>> baudrate = 19200
>>
>> # TCP port (when using the WeatherLinkIP)
>> tcp_port = 2
>>
>> # TCP send delay (when using the WeatherLinkIP):
>> tcp_send_delay = 0.5
>>
>> # The id of your ISS station (usually 1). If you use a wind meter
>> connected
>> # to a anemometer transmitter kit, use its id
>> iss_id = 1
>>
>> # How long to wait for a response from the station before giving up
>> (in
>> # seconds; must be greater than 2)
>> timeout = 4
>>
>> # How long to wait before trying again (in seconds)
>> wait_before_retry = 1.2
>>
>> # How many times to try before giving up:
>> max_tries = 4
>>
>> # The driver to use:
>> driver = weewx.drivers.vantage
>>
>> Currently installed extensions
>> No extensions installed
>>
>> Archive info
>>   Database name:weewx.sdb
>>   Table name:   archive
>>   Unit system:  1 (US)
>>   First good timestamp: 2016-11-24 17:05:00 GMT-1 (1480003500)
>>   Last good timestamp:  2016-12-03 14:45:00 GMT-1 (1480772700)
>>   Number of records:2535
>>   weewx (weewx.conf) is set to use an archive interval of 300 seconds.
>>   The station hardware was not interrogated in determining archive
>> interval.
>>
>> Databases configured in weewx.conf
>>   Database name:weewx.sdb
>>   Database driver:  weedb.sqlite
>>
>>   Database name:weewx
>>   Database driver:  weedb.mysql
>>   Database host:localhost
>>
>>
>> Parsed and obfuscated weewx.conf
>> # WEEWX CONFIGURATION FILE
>> #
>> # Copyright (c) 2009-2015 Tom Keffer 
>> # See the file LICENSE.txt for your rights.
>>
>> 
>> ##
>>
>> # This section is for general configuration information.
>>
>> # Set to 1 for extra debug info, otherwise comment it out or 

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

[Thomas Keffer]

BTW, you didn't say whether you are running a proxy server.

-tk

Fat-fingered from my Android

On Dec 3, 2016 6:00 AM, "Thomas Keffer"  wrote:

> One more thing to try: set debug=2 in weewx.conf. This will log the URL
>  used to contact the WU.
>
> I will be on the road today, so I may not be able to get back to you for a
> bit.
>
> -tk
>
> On Fri, Dec 2, 2016 at 8:42 PM, Marty Thompson 
> wrote:
>
>> ok installed latest jessie lite  25-11-2016  version
>>>
>> changed time
>> apt-get update
>> apt-get upgrade
>> apt-get dist-upgrade
>> rpi-update
>>
>> install weewx via new apt-get method
>>
>>
>>
>> run and heres the syslogs
>>
>> http://pastebin.com/wA50JmAi
>>
>> got me stumped   Can setup remote access if needes
>> and the debug
>>
>> pi@raspberrypi:~ $ wee_debug --info
>> Using verbosity=1, displaying most info
>>
>> wee_debug output will be sent to stdout(console)
>>
>> Using configuration file /etc/weewx/weewx.conf
>> Using database binding 'wx_binding', which is bound to database
>> 'archive_sqlite'
>>
>> System info
>>   CPU implementer:0x41
>>   Features:   half thumb fastmult vfp edsp java tls
>>   CPU architecture:   7
>>   BogoMIPS:   697.95
>>   Hardware:   BCM2708
>>   CPU revision:   7
>>   CPU part:   0xb76
>>   model name: ARMv6-compatible processor rev 7 (v6l)
>>   Serial: 6d665b92
>>   processor:  0
>>   CPU variant:0x0
>>   Revision:   0003
>>
>>   Operating system:   debian 8.0
>>   Linux raspberrypi 4.4.36+ #933 Fri Dec 2
>> 21:57:25 GMT 2016 armv6l
>>   1 minute load average:  0.12
>>   5 minute load average:  0.21
>>   15 minute load average: 0.52
>>
>> General weewx info
>>   Weewx version 3.6.2 detected.
>>
>> Station info
>>   Station type: Vantage
>>   Driver:   weewx.drivers.vantage
>>
>> Driver info
>> [Vantage]
>> # This section is for the Davis Vantage series of weather stations.
>>
>> # Connection type: serial or ethernet
>> #  serial (the classic VantagePro)
>> #  ethernet (the WeatherLinkIP)
>> type = serial
>>
>> # If the connection type is serial, a port must be specified:
>> #   Debian, Ubuntu, Redhat, Fedora, and SuSE:
>> # /dev/ttyUSB0 is a common USB port name
>> # /dev/ttyS0   is a common serial port name
>> #   BSD:
>> # /dev/cuaU0   is a common serial port name
>> port = /dev/ttyUSB0
>>
>> # If the connection type is ethernet, an IP Address/hostname is
>> required:
>> host = 1.2.3.4
>>
>> ##
>> # The rest of this section rarely needs any attention.
>> # You can safely leave it "as is."
>> ##
>>
>> # Serial baud rate (usually 19200)
>> baudrate = 19200
>>
>> # TCP port (when using the WeatherLinkIP)
>> tcp_port = 2
>>
>> # TCP send delay (when using the WeatherLinkIP):
>> tcp_send_delay = 0.5
>>
>> # The id of your ISS station (usually 1). If you use a wind meter
>> connected
>> # to a anemometer transmitter kit, use its id
>> iss_id = 1
>>
>> # How long to wait for a response from the station before giving up
>> (in
>> # seconds; must be greater than 2)
>> timeout = 4
>>
>> # How long to wait before trying again (in seconds)
>> wait_before_retry = 1.2
>>
>> # How many times to try before giving up:
>> max_tries = 4
>>
>> # The driver to use:
>> driver = weewx.drivers.vantage
>>
>> Currently installed extensions
>> No extensions installed
>>
>> Archive info
>>   Database name:weewx.sdb
>>   Table name:   archive
>>   Unit system:  1 (US)
>>   First good timestamp: 2016-11-24 17:05:00 GMT-1 (1480003500)
>>   Last good timestamp:  2016-12-03 14:45:00 GMT-1 (1480772700)
>>   Number of records:2535
>>   weewx (weewx.conf) is set to use an archive interval of 300 seconds.
>>   The station hardware was not interrogated in determining archive
>> interval.
>>
>> Databases configured in weewx.conf
>>   Database name:weewx.sdb
>>   Database driver:  weedb.sqlite
>>
>>   Database name:weewx
>>   Database driver:  weedb.mysql
>>   Database host:localhost
>>
>>
>> Parsed and obfuscated weewx.conf
>> # WEEWX CONFIGURATION FILE
>> #
>> # Copyright (c) 2009-2015 Tom Keffer 
>> # See the file LICENSE.txt for your rights.
>>
>> 
>> ##
>>
>> # This section is for general configuration information.
>>
>> # Set to 1 for extra debug info, otherwise comment it out or set to zero
>> debug = 1
>>
>> # Root directory of the weewx data file hierarchy for this station
>> WEEWX_ROOT = /
>>
>> # How long to wait before timing out a socket (FTP, HTTP) connection
>> 

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

[Thomas Keffer]

One more thing to try: set debug=2 in weewx.conf. This will log the URL
 used to contact the WU.

I will be on the road today, so I may not be able to get back to you for a
bit.

-tk

On Fri, Dec 2, 2016 at 8:42 PM, Marty Thompson  wrote:

> ok installed latest jessie lite  25-11-2016  version
>>
> changed time
> apt-get update
> apt-get upgrade
> apt-get dist-upgrade
> rpi-update
>
> install weewx via new apt-get method
>
>
>
> run and heres the syslogs
>
> http://pastebin.com/wA50JmAi
>
> got me stumped   Can setup remote access if needes
> and the debug
>
> pi@raspberrypi:~ $ wee_debug --info
> Using verbosity=1, displaying most info
>
> wee_debug output will be sent to stdout(console)
>
> Using configuration file /etc/weewx/weewx.conf
> Using database binding 'wx_binding', which is bound to database
> 'archive_sqlite'
>
> System info
>   CPU implementer:0x41
>   Features:   half thumb fastmult vfp edsp java tls
>   CPU architecture:   7
>   BogoMIPS:   697.95
>   Hardware:   BCM2708
>   CPU revision:   7
>   CPU part:   0xb76
>   model name: ARMv6-compatible processor rev 7 (v6l)
>   Serial: 6d665b92
>   processor:  0
>   CPU variant:0x0
>   Revision:   0003
>
>   Operating system:   debian 8.0
>   Linux raspberrypi 4.4.36+ #933 Fri Dec 2
> 21:57:25 GMT 2016 armv6l
>   1 minute load average:  0.12
>   5 minute load average:  0.21
>   15 minute load average: 0.52
>
> General weewx info
>   Weewx version 3.6.2 detected.
>
> Station info
>   Station type: Vantage
>   Driver:   weewx.drivers.vantage
>
> Driver info
> [Vantage]
> # This section is for the Davis Vantage series of weather stations.
>
> # Connection type: serial or ethernet
> #  serial (the classic VantagePro)
> #  ethernet (the WeatherLinkIP)
> type = serial
>
> # If the connection type is serial, a port must be specified:
> #   Debian, Ubuntu, Redhat, Fedora, and SuSE:
> # /dev/ttyUSB0 is a common USB port name
> # /dev/ttyS0   is a common serial port name
> #   BSD:
> # /dev/cuaU0   is a common serial port name
> port = /dev/ttyUSB0
>
> # If the connection type is ethernet, an IP Address/hostname is
> required:
> host = 1.2.3.4
>
> ##
> # The rest of this section rarely needs any attention.
> # You can safely leave it "as is."
> ##
>
> # Serial baud rate (usually 19200)
> baudrate = 19200
>
> # TCP port (when using the WeatherLinkIP)
> tcp_port = 2
>
> # TCP send delay (when using the WeatherLinkIP):
> tcp_send_delay = 0.5
>
> # The id of your ISS station (usually 1). If you use a wind meter
> connected
> # to a anemometer transmitter kit, use its id
> iss_id = 1
>
> # How long to wait for a response from the station before giving up (in
> # seconds; must be greater than 2)
> timeout = 4
>
> # How long to wait before trying again (in seconds)
> wait_before_retry = 1.2
>
> # How many times to try before giving up:
> max_tries = 4
>
> # The driver to use:
> driver = weewx.drivers.vantage
>
> Currently installed extensions
> No extensions installed
>
> Archive info
>   Database name:weewx.sdb
>   Table name:   archive
>   Unit system:  1 (US)
>   First good timestamp: 2016-11-24 17:05:00 GMT-1 (1480003500)
>   Last good timestamp:  2016-12-03 14:45:00 GMT-1 (1480772700)
>   Number of records:2535
>   weewx (weewx.conf) is set to use an archive interval of 300 seconds.
>   The station hardware was not interrogated in determining archive
> interval.
>
> Databases configured in weewx.conf
>   Database name:weewx.sdb
>   Database driver:  weedb.sqlite
>
>   Database name:weewx
>   Database driver:  weedb.mysql
>   Database host:localhost
>
>
> Parsed and obfuscated weewx.conf
> # WEEWX CONFIGURATION FILE
> #
> # Copyright (c) 2009-2015 Tom Keffer 
> # See the file LICENSE.txt for your rights.
>
> 
> ##
>
> # This section is for general configuration information.
>
> # Set to 1 for extra debug info, otherwise comment it out or set to zero
> debug = 1
>
> # Root directory of the weewx data file hierarchy for this station
> WEEWX_ROOT = /
>
> # How long to wait before timing out a socket (FTP, HTTP) connection
> socket_timeout = 20
>
> # Do not modify this. It is used when installing and updating weewx.
> version = 3.6.2
>
> 
> ##
>
> #   This section is for information about the station.
>
> [Station]
>
> # Description of the station location
> location = "Ayr, 

Re: [weewx-user] Re: WU rapid fire stops working after upgrade/s

[Thomas Keffer]

Here are the lines in the log involving the WU:

Dec  3 09:53:23 Wee_Wx weewx[1714]: engine: Loading service
weewx.restx.StdWunderground
Dec  3 09:53:23 Wee_Wx weewx[1714]: restx: Wunderground-RF: Data for
station IQLDAYR2 will be posted
Dec  3 09:53:23 Wee_Wx weewx[1714]: engine: Finished loading service
weewx.restx.StdWunderground
Dec  3 10:10:20 Wee_Wx weewx[1714]: restx: Wunderground-RF: Failed upload
attempt 1: timed out
Dec  3 11:50:35 Wee_Wx weewx[1714]: restx: Wunderground-RF: Failed upload
attempt 1: HTTP Error 502: Bad Gateway

Not sure exactly what's going on, but the last line suggests it's a problem
with a proxy server. Are you using one? This is a long shot, but the WU
uses a rather odd protocol. It uses an HTTP GET as a way to *post* data. If
you're using one, perhaps your proxy server doesn't like that?

I have no explanation for why it took almost 2 hours for this error to come
back.

-tk


On Fri, Dec 2, 2016 at 6:20 PM, Marty Thompson  wrote:

>
>
> Thanks tom heres a update
>>
>  http://pastebin.com/GFAHTBAh
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.