I experienced this same issue with a Davis Vantage Vue ISS with a Davis data logger. I recently noticed on Wunderground that when my wind speed was low enough, it would show up on the WU map with a dashed outline meaning that it was missing data. After a little research here, I found that I needed to disable rapidfire to keep that from occurring. After doing that, I found that I was experiencing this same issue with phantom leaf wetness, soil moisture, and soil temp values. I followed your instructions to update my weewx.conf and it's now working as desired, without reporting these erroneous values.
I have a question or two: 1. why does using rapidfire cause a loss of wind data reported to WU? 2. why did I NOT see any phantom values until I disabled rapidfire? Thanks, [the other] Tom K On Tuesday, May 24, 2016 at 10:18:12 PM UTC-5, Bill Richter wrote: > > This is my final configuration that is working. > > set record_generation=hardware in weewx.conf (this is the default) > > set these values to make sure nothing is archived or sent out. > > [StdCalibrate] > > [[Corrections]] > # For each type, an arbitrary calibration expression can be given. > # It should be in the units defined in the StdConvert section. > # Example: > #foo = foo + 0.2 > leafWet1 = None > soilMoist1 = None > soilTemp1 = None > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
