/cam
- Original Message -
From: D. Ryan Spott [EMAIL PROTECTED]
To: 'WISPA General List' wireless@wispa.org
Sent: Thursday, August 02, 2007 9:23 PM
Subject: [WISPA] Tools for making LMR400 N connectors...
I am looking for tools to / kits for LMR400 N connectors. I was recently
given
Check out Electro-Comm (800) 525-0173, Times EZ Connectors and a LMR400 Crimp
tool.
-Original Message-
From: D. Ryan Spott [mailto:[EMAIL PROTECTED]
Sent: Friday, August 3, 2007 12:23 AM
To: ''WISPA General List''
Subject: [WISPA] Tools for making LMR400 N connectors...
I am looking
www.odessaoffice.com/marlon/cam
- Original Message -
From: Ty Carter Lightwave Communications [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Friday, August 03, 2007 4:35 AM
Subject: RE: [WISPA] Tools for making LMR400 N connectors...
Ryan:
To make the connectors; I
02, 2007 9:23 PM
Subject: [WISPA] Tools for making LMR400 N connectors...
I am looking for tools to / kits for LMR400 N connectors. I was
recently
given a few hundred feet of LMR400 and I am always in need of
short runs of
cable here and there.
What kits/tools do you use?
Where can I get
One advice of caution, buy the stripper crimper from the same place that
sells the connectors.
Not all connectors are the same.
for the record, I use electro com and buy my tools from them as well as
the times ez's for 5 gig and 2 gig and the cheaper crimp /crimp aluminum
connectors for 2
Lightwave
Communications [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Friday, August 03, 2007 4:35 AM
Subject: RE: [WISPA] Tools for making LMR400 N connectors...
Ryan:
To make the connectors; I use four tools;
1 small Cresent wrench
1 box wrench
1 box cutter
1 small butane
