Testing to a dedicated Cogent server in California yielded the best
results; however, even testing to their pool of iperf servers provided
a transfer of 796 Mb/s. The trick was to run multiple threads (50).
Marco Coelho
[r...@ns1 ~]# iperf -c dca.iperf.cogentco.com -w 256000 -P 50 -C
So, I have a friend that tried that once.
It can be pretty hard to get decent speed with bittorrent on a stock system.
Lots of different clients, all requesting different data. Plays havoc
on drives. Need plenty of cache. RAID0 disk array, etc.
On top of that the linux distributions didn't seem
On Fri, Apr 16, 2010 at 3:03 AM, Jon Auer j...@tapodi.net wrote:
So, I have a friend that tried that once.
It can be pretty hard to get decent speed with bittorrent on a stock system.
Lots of different clients, all requesting different data. Plays havoc
on drives. Need plenty of cache. RAID0
Sent: Thursday, April 15, 2010 3:53 PM
Subject: [WISPA] looking for iperf test site with 1G open
I'm looking for someone with at least 1Gb/s of unused bandwidth to do
a few iperf tests against. I just lit up some new fiber and want to
see if it's up to snuff.
Thanks in advance.
Marco
Good info Rubens. Thanks!
On Thu, Apr 15, 2010 at 11:40 PM, Rubens Kuhl rube...@gmail.com wrote:
On Thu, Apr 15, 2010 at 10:34 PM, RickG rgunder...@gmail.com wrote:
Thats leads me to a question. I note RB's website specs for the 450G says:
Actual tested throughput Ether1 - Ether2 = 1Gbps
For
I'm looking for someone with at least 1Gb/s of unused bandwidth to do
a few iperf tests against. I just lit up some new fiber and want to
see if it's up to snuff.
Thanks in advance.
Marco
--
Marco C. Coelho
Argon Technologies Inc.
POB 875
Greenville, TX 75403-0875
903-455-5036
Torrents will fill capacity much better. Centos, Debian, Ubuntu, Fedora,
etc. Share the wealth!
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue
that counts.”
--- Winston
, April 15, 2010 3:53 PM
To: WISPA General List
Subject: [WISPA] looking for iperf test site with 1G open
I'm looking for someone with at least 1Gb/s of unused bandwidth to do
a few iperf tests against. I just lit up some new fiber and want to
see if it's up to snuff.
Thanks in advance.
Marco
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Marco Coelho
Sent: Thursday, April 15, 2010 3:53 PM
To: WISPA General List
Subject: [WISPA] looking for iperf test site with 1G open
I'm looking for someone with at least 1Gb/s of unused
Of Marco Coelho
Sent: Thursday, April 15, 2010 3:53 PM
To: WISPA General List
Subject: [WISPA] looking for iperf test site with 1G open
I'm looking for someone with at least 1Gb/s of unused bandwidth to do
a few iperf tests against. I just lit up some new fiber and want to
see if it's up
On Thu, Apr 15, 2010 at 10:34 PM, RickG rgunder...@gmail.com wrote:
Thats leads me to a question. I note RB's website specs for the 450G says:
Actual tested throughput Ether1 - Ether2 = 1Gbps
For large-large-large packets, as these boards are pps limited.
Ether2 - Ether3 = 650Mbps 1Gbps
11 matches
Mail list logo
