Put a small parachute (remember the ones you made from a napkin as a kid???)
tie that to a string. Hook a vacuum to the other end of the conduit. Count
to 10, check for string :-).
Marlon
(509) 982-2181
(408) 907-6910 (Vonage)Consulting services
42846865 (icq)
Make sure you have a filter BEFORE the fan providing suction to the
vacuum! String+motor axle=mess!
ryan
On Aug 15, 2007, at 8:47 AM, Marlon K. Schafer (509) 982-2181 wrote:
Put a small parachute (remember the ones you made from a napkin as
a kid???) tie that to a string. Hook a vacuum
Sandwich bag, with string tied around it, stuff lightly in the hole at
one end.
Large shop-vac at the other.
Suck.
tie string to cable. Pull.
Done.
:)
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mike Hammett
Sent: Tuesday, August 14, 2007
Subject: RE: [WISPA] Conduits
Sandwich bag, with string tied around it, stuff lightly in the hole at
one end.
Large shop-vac at the other.
Suck.
tie string to cable. Pull.
Done.
:)
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mike Hammett
Sent
One method if the conduit is empty is to attach a light pull
string to a ping pong ball and then to suck it through with a vacuum on
the conduit from the opposite end as the ping pong ball. This of course
assumes the conduit is tight sealed.
* Larry A. Weidig ([EMAIL PROTECTED])
*
I'd like to note that I've done conduit projects before, but always with 10'
sections, so I could just push the stuff through.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
- Original Message -
From: Mike Hammett [EMAIL PROTECTED]
To: WISPA List
://www.oibw.net
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Larry A Weidig
Sent: Tuesday, August 14, 2007 3:43 PM
To: WISPA General List
Subject: RE: [WISPA] Conduits
One method if the conduit is empty is to attach a light pull string
to a ping pong ball