I've been doing some experimenting with VOIP and asterisk over my
wireless network and came up with a few general observations that I
thought might be useful for those of you looking at voip and how it
impacts your network:
1) My test voip server is a P3 550 with 512MB of
We are using Asterisk too and it does seem to be very feature rich.
When you where testing did you notice a difference between the voice quality
of GSM and G729? Also, is your Asterisk server peering with your provider
using IAX2 and G711?
To optimize your StarOS AP I
I found an easy way to set up an asterisk box with AMP called [EMAIL
http://asteriskathome.sourceforge.net/, they have good help pages. You burn
an ISO disk and then let it do it's thing on boot. It will wipe the hard
drive clean and do a fresh install but it works great.
If anyone is interested I have 13 still in the box Orinooco AP-1000 that I want to sell for 125.00 plus freight
Yahoo! for Good
Click here to donate to the Hurricane Katrina relief effort.
WISPA Wireless List: firstname.lastname@example.org
If it is $125 for the lot, I'll take them!
robert maier wrote:
If anyone is interested I have 13 still in the box Orinooco
AP-1000 that I want to sell for 125.00 plus freight
Yahoo! for Good
Click here to
donate to the Hurricane Katrina relief effort.
Here is the latest estimates for power restoration for anyone who may be
in the Texas affected areas:
Below is some info on the status of energy restoration in Texas. Listed are
the companies and estimates of when they think the counties they support will
be restored. This is for INFO and
Auction, I hate that evil word.
Really guys, if there is any time to hammer congressional legislators and
Home land security personelle, NOW is the time. Before our precious
spectrum is auctioned off to the special interets. Auctioning off 700Mhz to
a major IELC could be the death of
What are people doing for WRAP board lightning protection?
Basically the WRAP board has a part that blows up, if it receives more than
21 Volts to its DC input.
So a typical CAT5 Lightning protector that protects the DC pairs at only
35V, 50V or 60V would pretty much be useless for protecting
Has anyone tested Mikrotik's VLAN support over the Wireless ports (Atheros)
for large packet support (1500 bytes + additional bytes for VLAN )?
I know that you can't layer VLAN on top of two pre-existed bridged ports,
its a limitation of Linux. But you can bridge a VLAN interface/port to
[not reading this list regularly, but tom hit a nerve]:
tom et al
caida (www.caida.org) is an internet data analysis/research organization
whose mission includes informing public policy, aimed toward improving
policy 'toward congruence' with our best empirical (scientifically grounded)
I am using a DC to DC converter with each of my WRAPs so they are
powered with the Lucent standard 48V POE. The D-Link 5V/12V switchable
POE units work fine for this.
I use flooded, shielded, with drain wire, outdoor CAT5 cable. (about
$75 for 1000ft) I tie the drain wire to the coax and
I see you have made your introduction K. :-) I think you guys will
find this lady's enthusiasm toward policy change to be no less than
revolutionary. She has an eye toward a complete rework of the FCC (as in
destroy it and rebuild governance of spectrum and policy from the ground
Mail list logo