You have to have to setup a TOD/SNTP time server it wont work with NTP and
also setup a DHCP relay server and in the sector controller put the ip
address of the TOD server and DHCP relay server, this is done in the sector
controllers management page.
On your DHCP relay machine don't forget to add
Marlon has been screaming about this for a while.
Tranzeo points at Mtik, Mtik points at Tranzeo. *sigh*
ryan
Kurt Fankhauser wrote:
Has anyone else seen this problem I am seeing. On my Mikrotik sites with
Atheros AP's the interface will decide to completely dump all of the atheros
clients
Yes, this is a known problem with MT AP's. They claim they are "working
on it".
Travis
Microserv
Kurt Fankhauser wrote:
Has anyone else seen this problem I am seeing. On my Mikrotik sites with
Atheros AP's the interface will decide to completely dump all of the atheros
clients and then
They have been in the past and they are currently listed as the place to go
to find WISPs across the country.
So I think it's a safe bet that they are.
--
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
--
From:
No. Here is the info from the FCC,
http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-08-1958A1.pdf
Frank
- Original Message -
From: Chuck McCown - 3 [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Sunday, August 24, 2008 11:25 PM
Subject: Re: [WISPA] Fw: [WISP]
How long has this problem been ongoing?
--
Kurt Fankhauser
WAVELINC
P.O. Box 126
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
- Original Message
From: WISPA General List wireless@wispa.org
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] MT interface randomly
I think there are messages on their forum almost a year old. :(
Travis
Microserv
Kurt Fankhauser wrote:
How long has this problem been ongoing?
--
Kurt Fankhauser
WAVELINC
P.O. Box 126
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
- Original Message
From: WISPA
OK, so why the preferential treatment? In other words, why isn't WISPA
performing this function?
- Original Message -
From: Mike Hammett [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Monday, August 25, 2008 8:32 AM
Subject: Re: [WISPA] Fw: [WISP] Emergency FCC
Frank pointed out that my WAG was wrong. However, Part-15 has been working
with the FCC for many moons and they have been with them through previous
disaster relief efforts.
Personally, I don't see there to be a need for two different WISP
organizations anyway.
--
Mike Hammett
Don't use Tranzo CPEs :) Just drop in great MT CPEs. lol..
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
Link Technologies, Inc -- Mikrotik WISP Support Services*
314-735-0270
http://www.linktechs.net http://www.linktechs.net/
*/ Link Technologies, Inc
Same problem with MT CPE's. I have hundreds of them deployed and they
do the exact same thing.
Travis
Dennis Burgess wrote:
Don't use Tranzo CPEs :) Just drop in great MT CPEs. lol..
--
* Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer
Link
I can confirm this. Anything Atheros based will drop off. The older CB3
stuff stays connected.
--
Kurt Fankhauser
WAVELINC
P.O. Box 126
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
- Original Message
From: WISPA General List wireless@wispa.org
To: WISPA General List
I don't have hundreds, but I have mostly R52 or similar cards deployed in my MT
CPE. On one tower using SR5s, I have over half of the CPE with wireless
uptimes of almost 9 days (last time I rebooted the AP).
--
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
On my 5GHz sector, I am using MT v3.11 (current firmware too) and I have
over 7 days on CPE connections. We performed maintenance last Sunday
@4:00 AM. They are all Mikrotik CPE.
The other sector we use is 2.4GHz and has a mix of Prizm and Atheros
(Tranzeo CPE, CPQ, and SL2). It is running
...and Toshiba already gets FCC authorization for its own labeled version
and announces it will market laptops with the chip starting in the fall. You
can get the details, along with all the new certs, FCC approvals and 3.65
operator lists now available for any to read without registration or
Patrick, wheres the info?
Gino A. Villarini
[EMAIL PROTECTED]
Aeronet Wireless Broadband Corp.
tel 787.273.4143 fax 787.273.4145
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Patrick Leary
Sent: Monday, August 25, 2008 6:24 PM
To: WISPA General
Flex? or Ajax?
- Matt
Matt Hardy wrote:
I've seen a couple of mentions of the slow interfaces today, so I
thought I'd jump in and add something that you guys have to look forward
to :)
Jason hinted at it, but the web interfaces are being completely
redesigned with a Flex back-end. This
August issue of the Sageni Sum. It is a pdf. It is linked from several
areas, with one being on the Sageni Sum part of the Web site and you will
see a download link at the left. Scroll over the images of the issues on the
left of the page. The 2nd image is the current issue.
On Mon, Aug 25, 2008
Flex. We were looking for a faster, cross platform configuration method
and flex/flash really works in this case. We can support browser or
standalone on windows/linux/ppc and give a much better overall
experience with the configuration.
http://www.adobe.com/products/flex/overview/
-Hal
Yeah, got it
Wondering about the about to expire EBS/BRS Licenses ... can anything
be done to get/adquire one of those expired ?
Gino A. Villarini
[EMAIL PROTECTED]
Aeronet Wireless Broadband Corp.
tel 787.273.4143 fax 787.273.4145
-Original Message-
From: [EMAIL PROTECTED]
Anyone has a standard Firewall set of rules for a regular RB450 doing
nat for customers?
thanks
Gino A. Villarini
[EMAIL PROTECTED]
Aeronet Wireless Broadband Corp.
tel 787.273.4143 fax 787.273.4145
WISPA
What radio are you using on your 2.4ghz AP?
Kurt Fankhauser
WAVELINC
P.O. Box 126
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Eric Rogers
Sent: Monday, August 25, 2008 5:28 PM
To: WISPA General List
22 matches
Mail list logo
