Re: [WISPA] RIP

2008-12-20 Thread Eric Rogers
Is the slowness on older routers? Do you have any that are the AH boards that are more than 400 MHz? Have you watched the processor from before RIP to after? Could be that the updates are overwhelming the older boards. Eric -Original Message- From: wireless-boun...@wispa.org

Re: [WISPA] eratic ethernet connection

2008-12-20 Thread Scott Reed
There used to be a long-wire setting in the RouterOS under Interface-Ehternet. I do not remember if it is still there or not. It should be set if the wire is over 100' or so. Mark McElvy wrote: I have a new WAN connection, it is a Long range Ethernet connection. It is being connected to a

[WISPA] Fw: [WISPA CALEA Questions] Trango and CALEA

2008-12-20 Thread Marlon K. Schafer
- Original Message - From: Michael Erskine mic...@kaballero.com To: CALEA Questions caleaquesti...@wispa.org Sent: Friday, December 19, 2008 11:01 AM Subject: Re: [WISPA CALEA Questions] [WISPA] Trango and CALEA CALEA prevents even the WISP from over collecting. We are no longer

[WISPA] Fw: [WISPA CALEA Questions] Trango and CALEA

2008-12-20 Thread Marlon K. Schafer
fyi marlon - Original Message - From: Michael J. Erskine mic...@kaballero.com To: CALEA Questions caleaquesti...@wispa.org Sent: Friday, December 19, 2008 6:10 PM Subject: Re: [WISPA CALEA Questions] [WISPA] Trango and CALEA Good evening everyone! Happy Christmas to all of you. It

Re: [WISPA] Fw: [TowerTalk] Some spectacular views of theabandonedRussian Woodpecker antenna array

2008-12-20 Thread Leon D. Zetekoff, NCE
I was in South Florida during those years and remember that irritant! I've got some dipoles in the attic setup and need to find some time to get back on. Leon * Jack Unger wrote, On 12/20/2008 1:39 AM: Yep. I remember the Woodpecker too. It really made a mess of the 40 meter ham band. _ _

Re: [WISPA] eratic ethernet connection

2008-12-20 Thread Eje Gustafsson
Should only need to be set if the run is over 328' or 100m ie longer then Ethernet is supporting. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Scott Reed Sent: Saturday, December 20, 2008 10:20 AM To: WISPA General List Subject: Re:

[WISPA] Need service on Ocala Florida

2008-12-20 Thread RickG
Need service on Ocala Florida - offlist -RickG WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List:

[WISPA] Remote Monitoring and ALERTING of battery levels...will these work??

2008-12-20 Thread John McDowell
We've deployed one of the RMS version 1 boards from www.remotemonitoringsystems.ca This has given us visibility of voltage levels on our batteriesBUT, does anyone know how to have these devices actually alert you when battery levels are low or AC is off...etc? WE use PowerCode which has MRTG

Re: [WISPA] Remote Monitoring and ALERTING of battery levels...will these work??

2008-12-20 Thread can...@believewireless.net
For less money than the RMS device you could get an APC card that will e-mail and page you of outages. Tripplite's card will do the same but it's not as good as the APC. On Sat, Dec 20, 2008 at 5:32 PM, John McDowell j...@boonlink.com wrote: We've deployed one of the RMS version 1 boards from

Re: [WISPA] Remote Monitoring and ALERTING of battery levels...will these work??

2008-12-20 Thread Leon Zetekoff
we used the RMS and used SNMP and the Dude to chart the voltage. leon can...@believewireless.net wrote: For less money than the RMS device you could get an APC card that will e-mail and page you of outages. Tripplite's card will do the same but it's not as good as the APC. On Sat, Dec 20,

Re: [WISPA] Remote Monitoring and ALERTING of battery levels...willthese work??

2008-12-20 Thread Faisal Imtiaz
Hi John, That board provides all the info via snmp... Which means that how you 'pull' out that info and 'monitor' the threshold it very flexible and a number of packages would do it. If you are an open source person... Cacti w/ Threshold plugin / Openmns / Nagios will allow you to do anything

Re: [WISPA] Remote Monitoring and ALERTING of battery levels...will these work??

2008-12-20 Thread cw
The easiest way to monitor whether you have outside power is to plug any device you can ping into the same outlet your batteries charge from. Power goes out and ping response stops. We used to use a lot of D-Link G810 bridges so that's what we happen to have a lot of and use but anything you