Re: [WISPA] Ever wonder how bad RB333/444 stacked cards interfere?

2010-04-28 Thread Paul Hendry
Have you tested pseudobridge to achieve a similar affect without WDS? -Original Message- From: Tom DeReggi [mailto:wirelessn...@rapiddsl.net] Sent: 28 April 2010 01:41 To: WISPA General List Subject: Re: [WISPA] Ever wonder how bad RB333/444 stacked cards interfere? Yes, WDS adds

Re: [WISPA] New WISP

2010-04-28 Thread Larry Yunker
I agree that Coding is not equal to Networking. But as I noted... programming IOS or even chucking in routes using command-line on Mikrotik looks like coding. I guess my point was that if you want to start a WISP, be prepared to get your hands dirty. At some point, you are likely to find the

Re: [WISPA] New WISP

2010-04-28 Thread Robert West
Larry is correct. I've went towards Mikrotik in these instances due to the overwhelming amount of Go To people and a Wiki on just about anything Mikrotik out there. Not to mention the cut and paste drop in scripts available. Bob- -Original Message- From: wireless-boun...@wispa.org

Re: [WISPA] MT PtP

2010-04-28 Thread Justin Wilson
If the link is good I would enable nstreme. Pay attention to your over the air rates. If they tend to ³flap² I would lock out the higher rates. You will get a better CCQ out of the link by doing that. If it were me I would enable WDS unless you are using the ³CPE² end as a station in router

Re: [WISPA] MT PtP

2010-04-28 Thread Kurt Fankhauser
What 350mw card are you using? I wouldn't use anything less than XR5 or R5H because their receive sensitivity is so much better. Plus you will use MMCX connectors with these two cards which is going to save you a lot of headaches over u.fl. Also definitely turn on N-stream. I had a link that was

Re: [WISPA] MT PtP

2010-04-28 Thread Josh Luthman
Have you used the r5h? The r52n is very disappointing. On 4/28/10, Kurt Fankhauser k...@wavelinc.com wrote: What 350mw card are you using? I wouldn't use anything less than XR5 or R5H because their receive sensitivity is so much better. Plus you will use MMCX connectors with these two cards

Re: [WISPA] MT PtP

2010-04-28 Thread Randy Cosby
FWIW I've been very pleased with the R52HN. On 4/28/2010 8:30 AM, Josh Luthman wrote: Have you used the r5h? The r52n is very disappointing. On 4/28/10, Kurt Fankhauserk...@wavelinc.com wrote: What 350mw card are you using? I wouldn't use anything less than XR5 or R5H because their

Re: [WISPA] New WISP

2010-04-28 Thread Cameron Crum
Very few but not zero...Wispmon will manage just about all daily operational aspects of a WISP. It was designed to do just that. FYI. On Tue, Apr 27, 2010 at 4:15 PM, Larry Yunker leyun...@wispadvantage.comwrote: For what it is worth... running a successful WISP will require a certain level of

Re: [WISPA] MT PtP

2010-04-28 Thread Travis Johnson
Me too. Power output is the same as the SR5 (tested on a 30 mile link), yet the receive level is 6db better. :) Travis Microserv Randy Cosby wrote: FWIW I've been very pleased with the R52HN. On 4/28/2010 8:30 AM, Josh Luthman wrote: Have you used the r5h? The r52n is very

Re: [WISPA] MT PtP

2010-04-28 Thread Robert West
I did fine with the R52HN cards until one of the RouterOS upgrades and my performance dropped. Swapped them all out. Using them in laptops now where they do a darn good job. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of

Re: [WISPA] MT PtP

2010-04-28 Thread Robert West
What about N-stream with 900Mhz? Is that just asking for trouble? Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Kurt Fankhauser Sent: Wednesday, April 28, 2010 10:23 AM To: aajayi...@as-technologies.com; 'WISPA General List'

Re: [WISPA] MT PtP

2010-04-28 Thread Robert West
Wait, N-Stream will work with non-mikrotik cards? I thought it was locked into only MT cards? Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, April 28, 2010 11:58 AM To: 'WISPA General List' Subject:

Re: [WISPA] MT PtP

2010-04-28 Thread Steve Barnes
I run all my rb411/XR9 setups with nstream. Seams to keep em nice and steady. Steve Barnes Manager PCS-WIN RC-WiFi Wireless Internet Service -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Wednesday, April 28, 2010

Re: [WISPA] MT PtP

2010-04-28 Thread Josh Luthman
Pretty sure it's just Atheros. Haven't tried nstreme and Prism... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Wed, Apr 28, 2010

Re: [WISPA] MT PtP

2010-04-28 Thread Robert West
With one radio. So if using one radio, do you add a second antenna to the setup to give you full duplex or how are you setting it all up? I've only seen it running with dual cards so I'm kinda interested in the single card setup. Bob- -Original Message- From:

Re: [WISPA] MT PtP

2010-04-28 Thread Steve Barnes
I think you are talking NSTREME dual tab on the wireless table. That is for full duplex which some love and some hate. If you go into the individual wireless card interface there is a Nstreme tab to enable and disable that on that one card. From MT Nstreme pdf: The nstreme protocol is

Re: [WISPA] MT PtP

2010-04-28 Thread Robert West
Yep, you're right. Wasn't aware of using on single card. Thanks! Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Steve Barnes Sent: Wednesday, April 28, 2010 12:22 PM To: WISPA General List Subject: Re: [WISPA] MT PtP I think

Re: [WISPA] MT PtP

2010-04-28 Thread Blair Davis
Works good for me. Robert West wrote: What about N-stream with 900Mhz? Is that just asking for trouble? Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Kurt Fankhauser Sent: Wednesday, April 28, 2010 10:23 AM To:

Re: [WISPA] MT PtP

2010-04-28 Thread Blair Davis
Works on Prism, but ALL cards connected to AP must be Prism Josh Luthman wrote: Pretty sure it's just Atheros. Haven't tried nstreme and Prism... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal:

Re: [WISPA] New WISP

2010-04-28 Thread Stuart Pierce
Larry , Shmary, he don't know jack about running a xISP. Just kidding, Larry knows more about being an xISP than Jer. ;) -- Original Message -- From: Robert West robert.w...@just-micro.com Reply-To: WISPA General List wireless@wispa.org Date: Wed, 28 Apr

[WISPA] QOS tc filter examples

2010-04-28 Thread Jason Wallace
I am finding that I need to improve the QOS of my network (I picked up a few customers with lots of teens, etc). Right now I use tc rules to limit everyone to the contracted speeds, but would like to use tc filter rules to give KNOWN GOOD traffic a good priority and UNKNOWN traffic a lesser

Re: [WISPA] bandwidth available

2010-04-28 Thread Mike
Marco: Toledo, IA. South Tama County. West of Cedar Rapids; east of Marshalltown. (out in the sticks) Friendly Regards, Mike -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Marco Coelho Sent: Wednesday, April 28, 2010 11:47 AM

Re: [WISPA] MT PtP

2010-04-28 Thread Kurt Fankhauser
How much throughput are you getting on the 900mhz with N-stream? 10mhz and 5mhz channels? Kurt Fankhauser WAVELINC P.O. Box 126 Bucyrus, OH 44820 419-562-6405 www.wavelinc.com _ From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Blair Davis Sent:

[WISPA] China set to tighten state-secrets law forcing Internet firms to inform on users

2010-04-28 Thread Jack Unger
BEIJING -- China is poised to strengthen a law requiring telecommunications and Internet companies to inform on customers who discuss state secrets, potentially forcing businesses to collaborate with the country's vast, dissent-stifling security apparatus...

Re: [WISPA] MT PtP

2010-04-28 Thread Kurt Fankhauser
Yes I have used the R5H and LOVE IT. Very nice card and a good price. I think it performs better than the XR5. However some people say that the card burns up easily but I run them all locked at 20db power output for all the modulation rates. I do this for two reasons. First so that the signal

Re: [WISPA] MT PtP

2010-04-28 Thread Steve Barnes
I use 20 MHz channels and don't have any I can turn down to get a test at the moment. Usually get 4-5 MB at the best. Steve Barnes Manager PCS-WIN RC-WiFi Wireless Internet Service -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of

Re: [WISPA] MT PtP

2010-04-28 Thread Robert West
I've had two burn out from the connector popping off for whatever reason. I learned to tape them on after that. But even with that, I finally pulled them all down. But they really do make for a great dual band card for laptops, the R52H ones, that is. Since we run both 2.4 and 5.8 I can see

[WISPA] Antenna Mast/Tower

2010-04-28 Thread Michael Baird
We are looking into a mast/tv tower type product for our client installations, I'm interested what others are using to accomplish this today. Looking for the best compromise between low cost and labor. Regards Michael Baird

Re: [WISPA] QOS tc filter examples

2010-04-28 Thread RickG
Contact Butch Evans, pay small amount for his script, problem solved! -RickG On Wed, Apr 28, 2010 at 1:28 PM, Jason Wallace supp...@azii.net wrote: I am finding that I need to improve the QOS of my network (I picked up a few customers with lots of teens, etc).  Right now I use tc rules to

Re: [WISPA] MT PtP

2010-04-28 Thread Josh Luthman
Mmcx connector popped off??? On 4/28/10, Robert West robert.w...@just-micro.com wrote: I've had two burn out from the connector popping off for whatever reason. I learned to tape them on after that. But even with that, I finally pulled them all down. But they really do make for a great dual

Re: [WISPA] MT PtP

2010-04-28 Thread Bret Clark
What is the general or best case throughput on these radios in PTP configuration (speed/distance)? I googled for it, but saw a lot of very old post with conflicting info. I need to build a backup link for one of our primary's and if the MT's can do the job all the better! Kurt Fankhauser

Re: [WISPA] QOS tc filter examples

2010-04-28 Thread Greg Ihnen
Is there no script that does something similar that is in the public domain? Even something basic to start with? Greg On Apr 28, 2010, at 2:26 PM, RickG wrote: Contact Butch Evans, pay small amount for his script, problem solved! -RickG On Wed, Apr 28, 2010 at 1:28 PM, Jason Wallace

Re: [WISPA] Antenna Mast/Tower

2010-04-28 Thread Robert West
For me every install is different so other than the j-arm mounts, it's a crap shoot on what we need. I keep my eye out for used tower sections and even knock on doors to see if I can have old American Tower TV towers that are no longer needed. Plus the local scrap yard keeps an eye out too so

Re: [WISPA] MT PtP

2010-04-28 Thread Robert West
Go figure. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Wednesday, April 28, 2010 3:00 PM To: WISPA General List Subject: Re: [WISPA] MT PtP Mmcx connector popped off??? On 4/28/10, Robert West

Re: [WISPA] MT PtP

2010-04-28 Thread Steve Barnes
I had a link with XR5 at each end with 2ft dishes at each end that was 18.5 miles with no issue. I needed more throughput so went to Radwin radios with the same antennas. Steve Barnes Manager PCS-WIN RC-WiFi Wireless Internet Service -Original Message- From:

Re: [WISPA] MT PtP

2010-04-28 Thread Robert West
Oh, no, not the MMCX! That stupid U.fl crap. Love the MMCX. All my MT cards are u.fl, I couldn't afford the MMCX MT. Crazy premium for good connectors. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Wednesday,

Re: [WISPA] QOS tc filter examples

2010-04-28 Thread Bret Clark
I'm currently using tc in linux but have been debating on loading Mikrotic's RouterOS onto a high-end server and have it handle the QoS for our network as it seems a lot easier to configure. Is anyone else doing this and have you found it to work well? Greg Ihnen wrote: Is there no script

Re: [WISPA] MT PtP

2010-04-28 Thread Kurt Fankhauser
Some people say there is 1db or 2db loss on the pigtail due to the MMCX connector. This is not the MMCX connectors fault but it is due to the connector being a right angle connector. I finally caught on to this when I was testing a right angle barrel N-connector versus a straight barrel

Re: [WISPA] QOS tc filter examples

2010-04-28 Thread Josh Luthman
Dozens of people including myself do QOS on MT with good x86 hardware. We are all very happy. On 4/28/10, Bret Clark bcl...@spectraaccess.com wrote: I'm currently using tc in linux but have been debating on loading Mikrotic's RouterOS onto a high-end server and have it handle the QoS for our

Re: [WISPA] MT PtP

2010-04-28 Thread Josh Luthman
For ufl use hot glue. Works wonders. Little dab around the connector and another to attach the coax to the minipci board for leverage. On 4/28/10, Robert West robert.w...@just-micro.com wrote: Oh, no, not the MMCX! That stupid U.fl crap. Love the MMCX. All my MT cards are u.fl, I couldn't

Re: [WISPA] Antenna Mast/Tower

2010-04-28 Thread Josh Luthman
For a tower mount I would definitely usee WB's tower mount. It's new to the market but been used for their own WISP. I think it's wb-tow or wb-twr at wbmfg.com On 4/28/10, Michael Baird m...@tc3net.com wrote: We are looking into a mast/tv tower type product for our client installations, I'm

Re: [WISPA] Antenna Mast/Tower

2010-04-28 Thread Kurt Fankhauser
I can drive to American Tower from my house and get there in 20 minutes :) If you are looking for anything that's not an actual tower check out this company. http://www.skywalker.com/ I use them for roof mounts, mast mounts, and any other kind of mount you didn't even know existed they have

Re: [WISPA] bandwidth available

2010-04-28 Thread Marco Coelho
Can you give me a physical address and who is the LEC? marco On Wed, Apr 28, 2010 at 12:33 PM, Mike m...@aweiowa.com wrote: Marco: Toledo, IA.  South Tama County.  West of Cedar Rapids; east of Marshalltown. (out in the sticks) Friendly Regards, Mike -Original Message- From:

Re: [WISPA] QOS tc filter examples

2010-04-28 Thread Jason Wallace
Rick, I had considered that. Then I read Butch's blog about when he developed it, and there were a few things that I think would prevent it from working correctly in my network: 1. His script seems to be tailored for RouterOS; he mentions that the script uses the PCQ qdisc (which is RouterOS

Re: [WISPA] QOS tc filter examples

2010-04-28 Thread Mark Dueck
I started my linux experience with Mastershaper - www.mastershaper.org If you can play with a system, set an IP address, have it generate all the rules for you, you'd be able to generate all other rules per IP off of that. The project looked to be dead for a while, but it's getting a little

Re: [WISPA] QOS tc filter examples

2010-04-28 Thread Josh Luthman
I would advise MT for traffic shaping. ImageStream and a lot of work can do stuff, too. I'd stay away from anything that takes a lot of effort like tc. 50 bucks will save you a LOT of time. As we all know time=money. On 4/28/10, Jason Wallace supp...@azii.net wrote: Rick,     I had

Re: [WISPA] MT PtP

2010-04-28 Thread Ralph
The right angle N connector should not be trusted unless it is an Amphenol. Many of the imports have a ball point pen spring inside that does the right angle. Good ones have an actual piece of metal. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org]

Re: [WISPA] QOS tc filter examples

2010-04-28 Thread RickG
I understand. His script truly improved my network and was worth every penny. It is obvious he put a lot of time into it. Sure, a guy could sit there and build it himself but whats the time worth. Obviously, there is no one size fits all so perhaps Butch has another or can tailor it to fit your

Re: [WISPA] QOS tc filter examples

2010-04-28 Thread Josh Luthman
The template itself is quite dynamic but just mention any individual things that require addition attention. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that counts.” ---

Re: [WISPA] MT PtP

2010-04-28 Thread Tom DeReggi
Ive never had a problem keeping them on, just taking them off. For example, if having a link problem, and want to swap mPCI to see if it helps. Thats when UFls can break, and why I prefer MMCX. Tom DeReggi RapidDSL Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message

Re: [WISPA] QOS tc filter examples

2010-04-28 Thread Greg Ihnen
Rick, Are you talking about a static config, or a script which does decision making and changes parameters? Greg On Apr 28, 2010, at 6:53 PM, RickG wrote: I understand. His script truly improved my network and was worth every penny. It is obvious he put a lot of time into it. Sure,

Re: [WISPA] Ever wonder how bad RB333/444 stacked cards interfere?

2010-04-28 Thread Justin Wilson
I have seen Pseudobridge on the Mikrotik side give OSPF issues. For the customer side no issues. But with OSPF and pseudobridge you have duplicate Mac addresses due to the nature of how it works. This can cause issues when running OSPF, at least in our experience. Had a network of 90 some

Re: [WISPA] Ever wonder how bad RB333/444 stacked cards interfere?

2010-04-28 Thread Travis Johnson
Yup... same here. OSPF does not work with anything but WDS. Travis Microserv Justin Wilson wrote: I have seen Pseudobridge on the Mikrotik side give OSPF issues. For the customer side no issues. But with OSPF and pseudobridge you have duplicate Mac addresses due to the nature of how it

[WISPA] You're going to love this... New IRS rules

2010-04-28 Thread MDK
http://www.cato-at-liberty.org/2010/04/26/costly-irs-mandate-slipped-into-health-bill/ It requires 1099's for EVERY entity you do more than $600 business with a year. Gas station. Walmart, your landlord, a $700 used car or truck.Ebay purchases, ALL require 1099's now if you go over $600 a

Re: [WISPA] You're going to love this... New IRS rules

2010-04-28 Thread Ralph
This is not correct. Please don't spread FUD. Check with your CPA to find out who and when you need to 1099. Only Individuals get 1099s, and only for services- not merchandise. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of MDK

Re: [WISPA] You're going to love this... New IRS rules

2010-04-28 Thread lakeland
This has always been in effect for individuals. Its not for entities and its surely not new -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: MDK rea...@muddyfrogwater.us Date: Wed, 28 Apr 2010 19:40:21 To: WISPA General Listwireless@wispa.org Subject: [WISPA]

Re: [WISPA] You're going to love this... New IRS rules

2010-04-28 Thread David Sovereen
Quickbooks can spit them out for you easily and automatically. Sure, it will take some time to collect TINs the first year it's in effect, but after that, the work is only incremental and highly automatable. Dave MDK rea...@muddyfrogwater.us wrote:

Re: [WISPA] You're going to love this... New IRS rules

2010-04-28 Thread Frank Crawford
It looks to me like there might have been a change ralph On 4/28/2010 7:48 PM, Ralph wrote: This is not correct. Please don't spread FUD. Check with your CPA to find out who and when you need to 1099. Only Individuals get 1099s, and only for services- not merchandise. -Original

[WISPA] WISPA Attracts Over 100 followers on Twitter

2010-04-28 Thread Rick Harnish
We passed 100 followers on Twitter today. While it isn't that many, I have a feeling many WISPs don't even use Twitter yet. It is a powerful tool for WISPA to get the word out on new posts on the webpage, tradeshow info and other important announcements we want to make to anyone who wants to

Re: [WISPA] New WISP

2010-04-28 Thread Robert West
Who is Jack? - Original Message - From: Stuart Pierce spie...@avolve.net To: WISPA General List wireless@wispa.org Sent: Wednesday, April 28, 2010 2:18 PM Subject: Re: [WISPA] New WISP Larry , Shmary, he don't know jack about running a xISP. Just kidding, Larry knows more about

Re: [WISPA] MT PtP

2010-04-28 Thread Robert West
I use a hammer. works well. - Original Message - From: Josh Luthman j...@imaginenetworksllc.com To: WISPA General List wireless@wispa.org Sent: Wednesday, April 28, 2010 3:30 PM Subject: Re: [WISPA] MT PtP For ufl use hot glue. Works wonders. Little dab around the connector and

Re: [WISPA] You're going to love this... New IRS rules

2010-04-28 Thread Robert West
I'll just keep doing what I'm doing no matter what stuff is inserted in whatever. I'l probably be one of everyone else in ignoring it. Bob- - Original Message - From: MDK rea...@muddyfrogwater.us To: WISPA General List wireless@wispa.org Sent: Wednesday, April 28, 2010 10:40 PM

Re: [WISPA] QOS tc filter examples

2010-04-28 Thread RickG
Butch added queue trees and some other stuff. The best thing to do is ask him. On Wed, Apr 28, 2010 at 8:15 PM, Greg Ihnen os10ru...@gmail.com wrote: Rick,        Are you talking about a static config, or a script which does decision making and changes parameters? Greg On Apr 28, 2010,

Re: [WISPA] MT PtP

2010-04-28 Thread RickG
That helps with the frustration! I recommend a 5 pound sledge :) On Thu, Apr 29, 2010 at 12:01 AM, Robert West robert.w...@just-micro.com wrote: I use a hammer.  works well. - Original Message - From: Josh Luthman j...@imaginenetworksllc.com To: WISPA General List wireless@wispa.org

Re: [WISPA] You're going to love this... New IRS rules

2010-04-28 Thread RickG
Ralph, Which part of Basically, businesses will have to issue 1099s whenever they do more than $600 of business with another entity in a year. is FUD? On Wed, Apr 28, 2010 at 10:48 PM, Ralph ralphli...@bsrg.org wrote: This is not correct. Please don't spread FUD. Check with your CPA to find

Re: [WISPA] QOS tc filter examples

2010-04-28 Thread Josh Luthman
Well all it is is in /ip firewall mangle and /queue tree but that's like saying all I need is Internet. Is that just IP with no DNS? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to

Re: [WISPA] You're going to love this... New IRS rules

2010-04-28 Thread RickG
Isn't that how it goes though? How much time and/or expense does it take to run your business for work that has nothing to do with your service? With all due respect, just because Quickbooks can do it easily doesnt mean it should be imposed on a business owner. And when you get down to it, when

Re: [WISPA] QOS tc filter examples

2010-04-28 Thread RickG
Heck, I would've wanted to type all the lines of code he put in there, let alone make sure it works! It wouldve taken me hours if not days! On Thu, Apr 29, 2010 at 12:19 AM, Josh Luthman j...@imaginenetworksllc.com wrote: Well all it is is in /ip firewall mangle and /queue tree but that's like

Re: [WISPA] QOS tc filter examples

2010-04-28 Thread Josh Luthman
I think you mean would not have wanted to... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Thu, Apr 29, 2010 at 12:24 AM, RickG

Re: [WISPA] MT PtP

2010-04-28 Thread Blair Davis
Well, let me log in and test... A note: the local environment has lots of noise... All H-Pol 5MHz channel width tower A is seen at -60, sees AP at -59 connection shows 54Mbps/4/54Mbps/4 Thruput AP to tower 6.4Mbps, tower to AP 5.9MBps tower B is seen at -77, sees AP at -77 connection

Re: [WISPA] MT PtP

2010-04-28 Thread Robert West
Noted. Thanks, Rick! You da man! - Original Message - From: RickG rgunder...@gmail.com To: WISPA General List wireless@wispa.org Sent: Thursday, April 29, 2010 12:11 AM Subject: Re: [WISPA] MT PtP That helps with the frustration! I recommend a 5 pound sledge :) On Thu, Apr 29, 2010

Re: [WISPA] You're going to love this... New IRS rules

2010-04-28 Thread Robert West
I just ignore. This is why I'm always in trouble. Screw em. I'm either a rebel or lazy. You decide. - Original Message - From: RickG rgunder...@gmail.com To: WISPA General List wireless@wispa.org Sent: Thursday, April 29, 2010 12:21 AM Subject: Re: [WISPA] You're going to love

Re: [WISPA] MT PtP

2010-04-28 Thread Robert West
Rick, I love ya. If you were a woman I'd divorce ya though. - Original Message - From: Robert West robert.w...@just-micro.com To: WISPA General List wireless@wispa.org Sent: Thursday, April 29, 2010 1:04 AM Subject: Re: [WISPA] MT PtP Noted. Thanks, Rick! You da man! -

Re: [WISPA] You're going to love this... New IRS rules

2010-04-28 Thread Philip Dorr
both? A lazy rebel? On Thu, Apr 29, 2010 at 12:06 AM, Robert West robert.w...@just-micro.com wrote: I just ignore. This is why I'm always in trouble. Screw em.  I'm either a rebel or lazy.  You decide. - Original Message - From: RickG rgunder...@gmail.com To: WISPA General

Re: [WISPA] QOS tc filter examples

2010-04-28 Thread RickG
LOL! See what I mean :) On Thu, Apr 29, 2010 at 12:29 AM, Josh Luthman j...@imaginenetworksllc.com wrote: I think you mean would not have wanted to... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not

Re: [WISPA] MT PtP

2010-04-28 Thread RickG
Thank God for the small favors as well as the big ones ;) On Thu, Apr 29, 2010 at 1:07 AM, Robert West robert.w...@just-micro.com wrote: Rick, I love ya.  If you were a woman I'd divorce ya though. - Original Message - From: Robert West robert.w...@just-micro.com To: WISPA General

Re: [WISPA] You're going to love this... New IRS rules

2010-04-28 Thread Robert West
You got it, brother. - Original Message - From: Philip Dorr wirel...@judgementgaming.com To: WISPA General List wireless@wispa.org Sent: Thursday, April 29, 2010 1:11 AM Subject: Re: [WISPA] You're going to love this... New IRS rules both? A lazy rebel? On Thu, Apr 29, 2010 at