[WISPA] ISC DHCPD

2010-07-16 Thread Butch Evans
Is there by some crazy chance an expert with this software awake at this hour? I need some quick (I hope it's quick) assistance getting a new configuration done. I'm working on a shared-network configuration where some parameters are not being returned in the reply. --

Re: [WISPA] ISC DHCPD

2010-07-16 Thread Bradley D. Thornton
-BEGIN PGP SIGNED MESSAGE- Hash: RIPEMD160 I'm awake and at the helm for a few butch... You wanna get an IRC channel? On 7/15/2010 11:44 PM, Butch Evans wrote: Is there by some crazy chance an expert with this software awake at this hour? I need some quick (I hope it's quick)

[WISPA] Mounting on silos

2010-07-16 Thread Scott Reed
I have a couple of POPs that are silos. Several of them are old concrete silos with metal domes. The top of the dome is more than 10' above the top of the concrete. I have been mounting with 10' pipe on the ladder side and not servicing customers on the back side. It has also worked out that

Re: [WISPA] Mounting on silos

2010-07-16 Thread Chuck Hogg
16' Schedule 40 Pipe. I have 4 silos like this. Attach pipe with L brackets (Old ARC Antenna mounts) to the silo with RedHeads (concrete anchors) into the concrete. Push up pole, with usually about 6' remaining (attached) on the silo and 8-10' sticking above the cap. I get the pipe from a

Re: [WISPA] Mounting on silos

2010-07-16 Thread Bill Gaylord
We do the same thing, but we use the full 21' galvanized pipes from the hardware store. I secure them with hose 2 hose clamps around at least 4 of the steel rings. I did not want to screw into the concrete, as I was concerned with the screws being able to come loose. With hose clamps around

Re: [WISPA] Mounting on silos

2010-07-16 Thread Scott Reed
Unfortunately at least one of the silos has no bands, so it will be screws, I guess. One silo we did use a 21' pipe and it still does not clear the dome. How much pipe to attach to the silo, so how far above the concrete do you get? Bill Gaylord wrote: We do the same thing, but we use the

Re: [WISPA] Mounting on silos

2010-07-16 Thread Kurt Fankhauser
Some of them old silo's like you are describing are pretty scary. I've been on them too and seen a lot of safety issues from the fall protection cage being rusted through and falling, to the top cap trying to fall off. Just be careful climbing those things! Kurt Fankhauser WAVELINC P.O. Box 126

Re: [WISPA] Mounting on silos

2010-07-16 Thread Scott Reed
Especially the one with an open ladder, no cage. Kurt Fankhauser wrote: Some of them old silo's like you are describing are pretty scary. I've been on them too and seen a lot of safety issues from the fall protection cage being rusted through and falling, to the top cap trying to fall off.

Re: [WISPA] Mounting on silos

2010-07-16 Thread Josh Luthman
How is that any different then any other tower? Especially a water tower. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Jul 16, 2010 at 10:13 AM, Scott Reed scottr...@onlyinternet.netwrote: Especially the one with an open ladder, no

Re: [WISPA] Mounting on silos

2010-07-16 Thread Mathew Howard
We usually attach 6-8' to the silo, which gives you about 15' above and clears the dome nicely. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Scott Reed Sent: Friday, July 16, 2010 8:04 AM To: WISPA General List Subject: Re: [WISPA] Mounting on silos

Re: [WISPA] Mounting on silos

2010-07-16 Thread Bill Gaylord
I agree with Mathew, we do about 6-8' trying to get 4 rings, but will accept 3 if that is all we can get. Bill Gaylord, President COLI Inc On 7/16/2010 10:15 AM, Mathew Howard wrote: We usually attach 6-8' to the silo, which gives you about 15' above and clears the dome nicely. *From:*

Re: [WISPA] Mounting on silos

2010-07-16 Thread Justin Wilson
Most silos like scott is dealing with have no ladder going to the very top. Imagine a domed water tower with no ladder to the top of the dome. They never were designed to have to climb to the top. No reason to. So what you are left with is a ladder that goes to where the dome starts. You

[WISPA] Small form factor POE switches

2010-07-16 Thread Justin Wilson
Anyone have recommendations for a POE switch with 4-8 ports? Preferably something which can handle semi-extreme weather. -- Justin Wilson j...@mtin.net http://www.mtin.net/blog Wisp Consulting ­ Tower Climbing ­ Network Support

[WISPA] SolecTek SkyWay Excel Series 5.8Ghz 2x2 MIMO 100mbit link for sale

2010-07-16 Thread Cameron Kilton
I have a brand new in box link connectorized version for sale if you are interested hit me off list with an offer. I'll cover the shipping within the US. -- Thanks, Cameron WISPA Wants You! Join today!

[WISPA] RocketM5 PPS

2010-07-16 Thread Matt
What is the max packets per second a RocketM5 can handle effectively? Matt WISPA Wants You! Join today! http://signup.wispa.org/

Re: [WISPA] RocketM5 PPS

2010-07-16 Thread Nick Olsen
I want to say it was 20-30K/s Nick Olsen Network Operations (321) 205-1100 x106 From: Matt lm7...@gmail.com Sent: Friday, July 16, 2010 10:59 AM To: WISPA General List wireless@wispa.org Subject: [WISPA] RocketM5 PPS What is the max packets per second a

Re: [WISPA] RocketM5 PPS

2010-07-16 Thread Faisal Imtiaz
I would suggest that you join the Forum on ubnt.com 's website...do a search on it.. i believe Mike Ford said they can handle about 19k...and someone else reported their testing showed they could handle more.. Regards. Faisal Imtiaz Snappy Internet Telecom 7266 SW 48 Street Miami, Fl

Re: [WISPA] Mounting on silos

2010-07-16 Thread Marlon K. Schafer
Re: [WISPA] Mounting on silosOne way to handle that (I often do this because I'm very afraid of heights) is to mount the antennas at the top then run good cable down to a nice play for the radios. LMR 600 only looses 3 or 4 dB per hundred feet. For runs of less than 50ish feet I'll usually

[WISPA] San Diego Whitespaces meeting

2010-07-16 Thread Marlon K. Schafer
Anyone else down here for the IEEE open forum this afternoon? I'd love the chance to say hello. It's at the Manchester Grand Hyatt. laters, marlon 509.988.0260 WISPA Wants You! Join today!

[WISPA] Looking for business class service in Tyler, TX...

2010-07-16 Thread Brad Belton
I have a lead for a 5MB business class customer in Tyler, TX. off of the South side of Loop 323. Please contact me off list if interested. Thank you, Brad WISPA Wants You! Join today! http://signup.wispa.org/

[WISPA] OT, fire at Odessa

2010-07-16 Thread Marlon K. Schafer
Sheesh, I leave town and all of the big stuff happens! 3000 acres up in smoke in one afternoon! wowsers http://www.emailthis.clickability.com/et/emailThis?clickMap=viewThisetMailToID=752475453 marlon WISPA

Re: [WISPA] OT, fire at Odessa

2010-07-16 Thread Josh Luthman
Video has a preroll that doesn't work with adblock. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Jul 16, 2010 at 11:54 AM, Marlon K. Schafer o...@odessaoffice.comwrote: Sheesh, I leave town and all of the big stuff happens! 3000

[WISPA] SAN recommendations for large CCTV projects?

2010-07-16 Thread Rogelio
Since others here sometimes deal with CCTV as a wireless application, I was hoping for some insight on the best *simple* (no frills, really) raw storage solution for 100 - 500 TBs. Right now, I've been looking at Hitachi, EMC, and Compellent (all fairly expensive). I also started looking at

Re: [WISPA] SAN recommendations for large CCTV projects?

2010-07-16 Thread Josh Luthman
I can advise AGAINST a product - http://www.datacore.com/products/prod_SANmelody.asp On 7/16/10, Rogelio scubac...@gmail.com wrote: Since others here sometimes deal with CCTV as a wireless application, I was hoping for some insight on the best *simple* (no frills, really) raw storage solution

Re: [WISPA] SAN recommendations for large CCTV projects?

2010-07-16 Thread Tom Sharples
We use Overland snapservers for this sort of application. Not as easy to configure as IOmega (EMC) but pretty indestructable, and well supported. Tom S. - Original Message - From: Rogelio scubac...@gmail.com To: WISPA General List wireless@wispa.org Sent: Friday, July 16, 2010 9:23 AM

Re: [WISPA] OT, fire at Odessa

2010-07-16 Thread Forbes Mercy
Yeah but one less thing to worry about while you're gone and it didn't hurt your equipment, sweet! See you in St. Louie. Forbes On 7/16/2010 8:54 AM, Marlon K. Schafer wrote: Sheesh, I leave town and all of the big stuff happens! 3000 acres up in smoke in one afternoon! wowsers

[WISPA] Friday Laugh

2010-07-16 Thread Jim Patient
I understand you don't want the antenna on your roof, mam. Is there some other place you can mount it?. Yes there is one other place that we can mount it and still get through the trees... http://wifimw.com/pics/redneck_install.jpg

Re: [WISPA] Friday Laugh

2010-07-16 Thread Forbes Mercy
I was wondering when the Friday Funnies were going to start! On 7/16/2010 10:24 AM, Jim Patient wrote: I understand you don't want the antenna on your roof, mam. Is there some other place you can mount it?. Yes there is one other place that we can mount it and still get through the

Re: [WISPA] SAN recommendations for large CCTV projects?

2010-07-16 Thread Jon Auer
We use Hitachi... I've played with NexentaStor with good results. NexentaStor: http://www.nexenta.com/ NexentaStor integrated with hardware: http://www.pogolinux.com/nexenta/ Note that I haven't tried either of these in a CCTV application, just normal ISP data storage. On Fri, Jul 16, 2010 at

Re: [WISPA] Friday Laugh

2010-07-16 Thread Marlon K. Schafer
I've done that. Sometimes it's the only way to get below the power lines. Higher is not always better. marlon - Original Message - From: Jim Patient sa...@jeffcosoho.com To: 'WISPA General List' wireless@wispa.org Sent: Friday, July 16, 2010 10:24 AM Subject: [WISPA] Friday Laugh I

Re: [WISPA] Friday Laugh

2010-07-16 Thread Steve Barnes
Whats not funny about that is I had an installer that mounted 10 customers like that till I fired him. Steve Barnes RC-WiFi Wireless Internet Service -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Jim Patient Sent: Friday, July 16,

Re: [WISPA] Friday Laugh

2010-07-16 Thread Jason Hensley
So have I. Here in the land of large full oak trees, same thing, sometimes the only way to get under the trees, power lines, etc. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Marlon K. Schafer Sent: Friday, July 16, 2010 12:37

Re: [WISPA] Friday Laugh

2010-07-16 Thread Chris Hudson
I've mounted J-poles like that, just not sideways! But it is good way to shoot under trees and what not. Chris - Original Message - From: Steve Barnes st...@pcswin.com To: WISPA General List wireless@wispa.org Sent: Friday, July 16, 2010 12:42 PM Subject: Re: [WISPA] Friday Laugh

Re: [WISPA] Friday Laugh

2010-07-16 Thread Stuart Pierce
What's wrong with that ? -- Original Message -- From: Jim Patient sa...@jeffcosoho.com Reply-To: WISPA General List wireless@wispa.org Date: Fri, 16 Jul 2010 12:24:17 -0500 I understand you don't want the antenna on your roof, mam. Is there some other

Re: [WISPA] Friday Laugh

2010-07-16 Thread Jim Patient
Just struck my funny bone because it was too obtrusive for her roof but not for her front porch. Jim On 7/16/2010 2:17 PM, Stuart Pierce wrote: What's wrong with that ? -- Original Message -- From: Jim Patientsa...@jeffcosoho.com Reply-To: WISPA

Re: [WISPA] Friday Laugh

2010-07-16 Thread Josh Luthman
Maybe a picture from a distance would have been better. People will never seize to amaze. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Jul 16, 2010 at 2:21 PM, Jim Patient sa...@jeffcosoho.com wrote: Just struck my funny bone because

[WISPA] Trango GigaPlus Experience?

2010-07-16 Thread Gino Villarini
Anyone with Experience on this units? Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 WISPA Wants You! Join today! http://signup.wispa.org/

Re: [WISPA] Friday Laugh

2010-07-16 Thread Adam Kennedy
Or cease even. -- Adam Kennedy Network Engineer Omnicity, Inc. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Friday, July 16, 2010 2:28 PM To: WISPA General List Subject: Re: [WISPA] Friday Laugh Maybe a picture from a distance would have

Re: [WISPA] Friday Laugh

2010-07-16 Thread Stuart Pierce
Heavens to maggetroid, exit stage left. -- Original Message -- From: Adam Kennedy adamkenn...@omnicity.net Reply-To: WISPA General List wireless@wispa.org Date: Fri, 16 Jul 2010 15:20:44 -0400 Or cease even. -- Adam Kennedy Network Engineer Omnicity,

[WISPA] TV Whitespaces 802.19.1 coexistance workshop

2010-07-16 Thread Marlon K. Schafer
Hi All, I'm sitting in this meeting and thought I'd take notes and let you know what's going on. This is NOT an IEEE function, it's done by the committee. I'll add to this note as I can. If anyone has questions they'd like me to ask fire them out and I'll pass them along. marlon

Re: [WISPA] [WISPA Members] TV Whitespaces 802.19.1 coexistance workshop

2010-07-16 Thread Marlon K. Schafer
You can join a mailing list at ieee802.org/19/pub/subscribe.html There are frequent conference calls: ieee802.org/19/pug/calls.html Face to face meetings. Next one is in Sept., Hawaii after that in Dec. in Dallas. - Original Message - From: Marlon K. Schafer o...@odessaoffice.com To:

Re: [WISPA] Friday Laugh

2010-07-16 Thread Mike Hammett
I have some that aren't far from that, but they're not that blatant. I try to hide them as much as I can, more so in the unconventional installs. It is to get under the trees. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com On 7/16/2010 12:37 PM, Marlon K.

Re: [WISPA] Friday Laugh

2010-07-16 Thread Mike Hammett
Power lines cause you problems? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com On 7/16/2010 12:37 PM, Marlon K. Schafer wrote: I've done that. Sometimes it's the only way to get below the power lines. Higher is not always better. marlon - Original Message

Re: [WISPA] Friday Laugh

2010-07-16 Thread Mike Hammett
hah, true - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com On 7/16/2010 1:21 PM, Jim Patient wrote: Just struck my funny bone because it was too obtrusive for her roof but not for her front porch. Jim On 7/16/2010 2:17 PM, Stuart Pierce wrote: What's wrong

Re: [WISPA] Friday Laugh

2010-07-16 Thread Marlon K. Schafer
Oh yeah. They can cause a LOT of speed issues. Sometimes they'll cut signal too. I try to stay as far away from them as I can. It's not as big of a problem with low customer density per ap or low noise levels. Today it matters. Sometimes a lot, sometimes a little, usually it's noticeable

Re: [WISPA] [WISPA Members] TV Whitespaces 802.19.1 coexistance workshop

2010-07-16 Thread Marlon K. Schafer
ieee 802 has about 1500 members in 12 different working groups. Technical issues voted on within the groups need 75% approval to pass. This is the 802.19 wireless coexistance working group. Ug, he talks way faster than I can type! This effort has been in process since March of 2009. Right

Re: [WISPA] Trango GigaPlus Experience?

2010-07-16 Thread can...@believewireless.net
If it's anything like the original Giga, I'd pass. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List:

Re: [WISPA] [WISPA Members] TV Whitespaces 802.19.1 coexistance workshop

2010-07-16 Thread Marlon K. Schafer
Panel A (second panel, go figure) Jack Unger, WISPA Introducing WISPA. Need interference minimization mechanisms. Risks of sensing as it's designed. Channel changes are not easy across broad spectrum distances (60mhz to 600mhz will have greatly different propagation). Talked

Re: [WISPA] SAN recommendations for large CCTV projects?

2010-07-16 Thread Jeremy Parr
On 16 July 2010 12:23, Rogelio scubac...@gmail.com wrote: Since others here sometimes deal with CCTV as a wireless application, I was hoping for some insight on the best *simple* (no frills, really) raw storage solution for 100 - 500 TBs. Right now, I've been looking at Hitachi, EMC, and

Re: [WISPA] [WISPA Members] TV Whitespaces 802.19.1 coexistance workshop

2010-07-16 Thread Marlon K. Schafer
Gerald Chouinard: 802.22 is an outdoor standard specifically for whitespaces Range of 10 to 30 km Set for very long echoes and multipath LOVE this standard so far! 23mhz throughput in 6mhz channel out to 10 miles, slower at longer ranges Interference range of wifi device (we

Re: [WISPA] [WISPA Members] TV Whitespaces 802.19.1 coexistance workshop

2010-07-16 Thread Marlon K. Schafer
Spectrum bridge is talking about the Claudville Va. whitespaces test/demo network Did about a meg and a half over 3 miles point to point? Showing a propagation map of 200mhz vs. 2400mhz, the coverage is amazing! Another test city, Wilmington, NC Did smart city services/data

Re: [WISPA] Mounting on silos

2010-07-16 Thread Robert West
Wasn't there someone here who had a one hell of a design for a silo hoop bracket? It's been awhile but that was one heck of a setup. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Scott Reed Sent: Friday, July 16, 2010 7:56 AM

Re: [WISPA] Mounting on silos

2010-07-16 Thread Robert West
Top cap??? Yours still HAVE the top cap?!! -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Kurt Fankhauser Sent: Friday, July 16, 2010 9:24 AM To: 'WISPA General List' Subject: Re: [WISPA] Mounting on silos Some of them old silo's

Re: [WISPA] Mounting on silos

2010-07-16 Thread Robert West
Water Grain. Two difference substances. Pay attention. J From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Friday, July 16, 2010 10:15 AM To: WISPA General List Subject: Re: [WISPA] Mounting on silos How is that

Re: [WISPA] OT, fire at Odessa

2010-07-16 Thread Robert West
But it's okay cause Papa Murphy's has a pizza to suit ya. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Marlon K. Schafer Sent: Friday, July 16, 2010 11:55 AM To: WISPA General List Subject: [WISPA] OT, fire at Odessa Sheesh, I

Re: [WISPA] OT, fire at Odessa

2010-07-16 Thread Robert West
Correction... throw all your lighting damaged equipment into it and file a claim. Yeah, baby! Always looking for the scam against the man. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Forbes Mercy Sent: Friday,

Re: [WISPA] Friday Laugh

2010-07-16 Thread Robert West
I fired that S.O.B. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Forbes Mercy Sent: Friday, July 16, 2010 1:31 PM To: WISPA General List Subject: Re: [WISPA] Friday Laugh I was wondering when the Friday Funnies were going to

Re: [WISPA] SolecTek SkyWay Excel Series 5.8Ghz 2x2 MIMO 100mbit linkfor sale

2010-07-16 Thread Chuck Hogg
I also have one, not to hijack the thread, but it is for sale for the right price. I'm not looking for much. Regards, Chuck Hogg Shelby Broadband 502-722-9292 ch...@shelbybb.com http://www.shelbybb.com -Original Message- From: wireless-boun...@wispa.org

Re: [WISPA] Small form factor POE switches

2010-07-16 Thread RickG
Not really a switch but this unit has been through the mill and keeps on ticking -- http://www.wlanparts.com/product/POE-18I4S/4-Port-POE-Power-SupplyInserter-18VDC-output.html They have 24 volt and 802.3AF versions as well. If it needs to be a switch, I have one of these --

Re: [WISPA] Mounting on silos

2010-07-16 Thread RickG
To make up for the weakness, I just use a 45' push up pipe and just make sure not to extend it more than halfway which gives me about 20+ feet. On Fri, Jul 16, 2010 at 8:08 AM, Chuck Hogg ch...@shelbybb.com wrote: 16' Schedule 40 Pipe.  I have 4 silos like this.  Attach pipe with L brackets

Re: [WISPA] Mounting on silos

2010-07-16 Thread RickG
Yup, stainless steel hose clamps have been a winner for me too. On Fri, Jul 16, 2010 at 9:00 AM, Bill Gaylord bi...@torchlake.com wrote: We do the same thing, but we use the full 21' galvanized pipes from the hardware store.  I secure them with hose 2 hose clamps around at least 4 of the steel

Re: [WISPA] Mounting on silos

2010-07-16 Thread RickG
Ya, I did that on some of my hard to climb locations. What a dream compared to the nightmare they were! On Fri, Jul 16, 2010 at 11:10 AM, Marlon K. Schafer o...@odessaoffice.com wrote: One way to handle that (I often do this because I'm very afraid of heights) is to mount the antennas at the

Re: [WISPA] Mounting on silos

2010-07-16 Thread RickG
I thought the same thing. Now that would be cool if designed right! On Fri, Jul 16, 2010 at 9:00 PM, Robert West robert.w...@just-micro.com wrote: Wasn't there someone here who had a one hell of a design for a silo hoop bracket?  It's been awhile but that was one heck of a setup. Bob-

Re: [WISPA] Mounting on silos

2010-07-16 Thread RickG
LOL! I've got a few silos and the ones without the top cap are much nicer to work on. Darn things get in the way. On Fri, Jul 16, 2010 at 9:01 PM, Robert West robert.w...@just-micro.com wrote: Top cap???  Yours still HAVE the top cap?!! -Original Message- From:

Re: [WISPA] Mounting on silos

2010-07-16 Thread RickG
As far as climbing, most of the silos have a light-weight ladder compared to water tanks. Also, no high place to tie off at the top. Same precautions only more so. On Fri, Jul 16, 2010 at 10:15 AM, Josh Luthman j...@imaginenetworksllc.com wrote: How is that any different then any other tower? 

Re: [WISPA] Friday Laugh

2010-07-16 Thread RickG
Same here. Do what you gotta do sometimes. I had one installer aim it right into a tree that was only 10 feet away though. Really ticked me off. On Fri, Jul 16, 2010 at 1:37 PM, Marlon K. Schafer o...@odessaoffice.com wrote: I've done that.  Sometimes it's the only way to get below the power

Re: [WISPA] Friday Laugh

2010-07-16 Thread RickG
Especially transformers! On Fri, Jul 16, 2010 at 4:46 PM, Marlon K. Schafer o...@odessaoffice.com wrote: Oh yeah.  They can cause a LOT of speed issues.  Sometimes they'll cut signal too.  I try to stay as far away from them as I can. It's not as big of a problem with low customer density